Omega Link OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN Install Manual

Omega Link OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN is a cutting-edge device that empowers you to customize your vehicle's security and convenience features. With its advanced capabilities, you can effortlessly perform tasks like remote locking/unlocking, trunk release, and alarm control, ensuring your vehicle's safety and enhancing your driving experience.

PDF Download

Document

instaLL guiDe

OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN

Document numbeR

20456

Revision Date

20150121

FiRmwaRe

OEM-IDS(RS)-BM1-[OL-RS-BM1]

haRDwaRe

OL-RS-BM1

accessoRies

OL-LOADER (REQUIRED)

notice

The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work.

U.S. Patent No. 8,856,780

beFoRe instaLLation

1- Connect module to computer

2- Login to Weblink account

3- Flash firmware to module (module is not preloaded with firmware)

4- Use accessories accordingly (accessories are sold separately) www.omegaweblink.com

VEHICLE LIST - 1 OF 1

FEATURES

Page 2 oF 18

DOC.: #20456

• 20150121

NOTES

I This fi rmware covers Automatic Transmission

(AT) vehicles only.

1 Series PTS AT

3 Series PTS AT***

3 Series Coupe PTS AT***

5 Series PTS AT

6 Series PTS AT

1M PTS AT

M3 PTS AT***

M3 Coupe PTS AT***

M5 PTS AT

M6 PTS AT

X1 PTS AT***

X5 PTS AT

X5 Diesel PTS AT

X5 M PTS AT

X6 PTS AT

X6 M PTS AT

08-13 1

06-11 1

07-13 1

05-10 1

11 1

•

• •

08-12 1 • • • • • • • • •

08-13 1 • • • • • • • • •

06-10 1 • • • • • • • • •

12-14 1 • • • • • • • • •

07-13 1 • • • • • • • •

10-13 1 • • • • • • • •

08-14 1 • • • • • • • •

10-14 1 • • • • • • • •

•

Z4 PTS AT***

Clubman PTS AT***

Cooper PTS AT***

Cooper Convertible PTS AT***

09-14 1 • • • • • • • • •

08-14 1 • • • • • • • • •

07-14 1 • • • • • • • • •

08-14 1 • • • • • • • • •

Countryman / ALL-4 PTS AT

Coupe PTS AT***

11-14 2 • • • • • • • • •

12-14 1 • • • • • • • • •

Paceman PTS AT

Roadster PTS AT***

* If equipped with a factory hood switch.

** If equipped with an electric E-brake and it is activated, vehicle will shudown when a door is opened during RS sequence.

*** If equipped with the Confort Access System, the door handles will not be functional during RS sequence.

13-14 2 • • • • • • • • •

12-14 1 • • • • • • • • •

• • • • •

• • •

• • • • •

• • • • • •

• • •

• • • • • • • • • •

• • • • • • • • •

• • • • • •

•

• • • • •

• • •

U.S. Patent No. 8,856,780

BOX CONTENTS - 1 OF 1

BOX CONTENTS

MODULE

PROGRAMMING

BUTTON

LED 1

BLACK

BLUE

6 5

USB

LED 2

1 2 3

BLACK

1 2 3 4

BLACK

RF PORT/WEBLINK PORT

1 2

11 12

1 2

RED

BLUE

BLACK

BLUE

TELEMATIC

PORT

WHITE

BLACK

EXPANSION PACK

XP LED 1 XP LED 2

BLACK

LED

T-HARNESS 1

EXPANSION PACK ASSEMBLY

LED

7 9 1113 1517

8 10 12 14 16 18

WHITE

WEBLINK CABLE (required accessory sold separately)

WEBLINK CABLE

MODULE

WEBLINK PORT

4 PIN BLACK CABLE

U.S. Patent No. 8,856,780

TOP VIEW BOTTOM VIEW

OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN

TOP VIEW

COMPUTER

USB PORT

10 PIN WHITE CONNECTOR

12 PIN BLACK CONNECTOR

AFTERMARKET HOOD SWITCH AND CABLE

EXPANSION CABLE

Page 3 oF 18

DOC.: #20456

• 20150121

18 PIN WHITE CONNECTOR - ADAPTER CABLE

THE ADS-HRNBMW01-2 CABLE IS INCLUDED IN KITS

MANUFACTURED AFTER 11/12/2013. CONTACT YOUR

AUTHORIZED DEALER, IF THIS CABLE IS NOT INCLUDED.

STICKER 1

ADS-HRNBMW01-2

STICKER 2

www.omegaweblink.com

imPoRtant technicaL note - 1 OF 1

instaLL viDeo gaLLeRY avaiLabLe onLine

Before installing this product, consult our Install Video Gallery and watch:

• Vehicle Disassembly Procedure videos

• Module Connection Procedures videos

•

Module Programming Procedures videos

Simply visit our forum and register at http://www.12voltdata.com/forum/viewtopic.php?f=340&t=9683&sid=a61772b486e4584ad6f058b171ffa425

Page 4 oF 18

DOC.: #20456

• 20150121

U.S. Patent No. 8,856,780

START vehicle. Verify all vehicle functionalities. If the vehicle displays error messages or any malfunction: stop the installation and service the vehicle.

Turn ignition to OFF position. Remove keyfob from keyport.

MODULE INSTALLATION PROCEDURE - 1 OF 1

WARNING: Any vehicle harness that is disconnected during installation, must be re-connected before performing any system tests. Failure to comply will result in vehicle displaying error messages. An OEM scantool will be required to clear the error messages.

START vehicle. Verify all vehicle functionalities.

Verify all keyfob functionalities (Door Lock,

Door Unlock, Trunk Release and Comfort

Access System if equipped).

Insert the expansion pack into module.

Connect the module to the computer with the

WEBLINK cable. Flash the module with the latest fi rmware then ﬂ ash the expansion pack.

Connect and secure every connector to the vehicle, as shown in STEP 1 of the WIRING

DIAGRAM.

U.S. Patent No. 8,856,780

WARNING: If the vehicle displays error messages or any malfunction, stop the installation, verify every connection and if the problem persists, call technical support.

Turn ignition to OFF position. Remove keyfob from keyport.

Connect and secure every connector to the module, as shown in STEP 2 of the WIRING

DIAGRAM.

Connect and secure every connector of the expansion cable to the module, as shown in

STEP 3 of the WIRING DIAGRAM.

OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN

Page 5 oF 18

DOC.: #20456

• 20150121

If required, connect an accessory as shown in the COMPATIBLE ACCESSORIES section of the guide.

If the vehicle is not equipped with a factory hood switch, install an aftermarket hood switch as shown in STEP 4 of the WIRING

DIAGRAM.

Put sticker 1 on a clean and visible surface in the engine bay and put sticker 2 under the dashboard near the OBDII connector.

Module installation procedure completed.

www.omegaweblink.com

WARNING

1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4

2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1

MODULE

STEP 2

BLACK 20 PIN

CONNECT TO MODULE

WHITE 18 PIN

WARNING: THE ADAPTER CABLE IS NOT REQUIRED

STEP 3

CONNECT TO MODULE

BLACK 4 PIN

TYPE 1 - WIRING DIAGRAM - 1 OF 1

STEP 1

CONNECT THE FOLLOWING TO THE VEHICLE

START THE VEHICLE WITH THE OEM KEYFOB

TO TEST THE CONNECTIONS

RELAY

Page 6 oF 18

DOC.: #20456

• 20150121

BRAKE SWITCH

BRAKE HARNESS

COMFORT ACCESS SYSTEM MODULE

MINI: BEHIND INSTRUMENT PANEL, DRIVER SIDE

BMW: UNDER DASH, DRIVER SIDE

B1 CONNECTOR

B2 HARNESS

RELAY

BLACK 6 PIN

C1 CONNECTOR

C2 HARNESS

WARNING:

THESE CONNECTORS

HAVE TWO [2X] LOCKING

MECHANISMS.

INSERT THE CONNECTOR

IN ITS HOUSING AND

APPLY GENTLE PRESSURE

ON BOTH EXTREMITIES

TO SECURE THE

CONNECTION. (TWO AUDIBLE

CLICKS WILL BE HEARD.)

U.S. Patent No. 8,856,780

STEP 4

CONNECT IF REQUIRED

WHITE 10 PIN

07 GRAY/WHITE - HOOD STATUS (-) INPUT

08 GRAY/BLACK (NOT USED)

IF NOT EQUIPPED

WITH AN OEM HOOD SWITCH,

INSTALL AN AFTERMARKET HOOD SWITCH

OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN

HOOD SWITCH www.omegaweblink.com

TYPE 2 - WIRE CHART - 1 OF 1

Countryman / ALL-4 PTS AT

Paceman PTS AT

11-14

13-14

WIRE DESCRIPTION

12V

Ground

CanH

CanL

12V

Ground

CanH

CanL

X14261

51 pin

WIRE COL

02 Red/Yellow

47 Brown or Brown/Black

46 Orange/Green

45 Green

02 Red/Yellow

47 Brown or Brown/Black

46 Orange/Green

45 Green

(+)

MODULE LOC

Driver kick panel

(-) Driver kick panel

(DATA) Driver kick panel

(+) Driver kick panel

(-) Driver kick panel

(DATA) Driver kick panel

Page 7 oF 18

DOC.: #20456

• 20150121

COMPONENT LOC

U.S. Patent No. 8,856,780

WARNING

1-TO CONNECT THE MODULE: FOLLOW STEPS 1 TO 4

2-TO DISCONNECT THE MODULE: FOLLOW STEPS 4 TO 1

MODULE

STEP 2

BLACK 20 PIN

CONNECT TO MODULE

WHITE 18 PIN

ADAPTER CABLE

STEP 3

CONNECT TO MODULE

WHITE 18 PIN

BLACK 4 PIN

BLACK 6 PIN

TYPE 2 - WIRING DIAGRAM - 1 OF 1

STEP 1

CONNECT THE FOLLOWING TO THE VEHICLE

START THE VEHICLE WITH THE OEM KEYFOB

TO TEST THE CONNECTIONS

RELAY

Page 8 oF 18

DOC.: #20456

• 20150121

BRAKE SWITCH

BRAKE HARNESS

RED

BLACK

PINK (

NOT USED

)

PINK/RED

PINK/YELLOW

BLACK

CONNECT

IF WIRE

IS PRESENT

RELAY

CUT AND REMOVE CONNECTORS

FROM T-HARNESS

5 AMPS

12V (+) - 02

GROUND - 47

CANH - 46

CANL - 45

GROUND - 47

X14261

DRIVER KICK PANEL

X14261

KEYPORT CONNECTOR

1 2 3

8 9 10 11

4 5 6 7

12 13 14

KEYPORT HARNESS

WARNING:

THESE CONNECTORS

HAVE TWO [2X] LOCKING

MECHANISMS.

INSERT THE CONNECTOR

IN ITS HOUSING AND

APPLY GENTLE PRESSURE

ON BOTH EXTREMITIES

TO SECURE THE

CONNECTION. (TWO AUDIBLE

CLICKS WILL BE HEARD.)

U.S. Patent No. 8,856,780

STEP 4

CONNECT IF REQUIRED

WHITE 10 PIN

07 GRAY/WHITE - HOOD STATUS (-) INPUT

08 GRAY/BLACK (NOT USED)

IF NOT EQUIPPED

WITH AN OEM HOOD SWITCH,

INSTALL AN AFTERMARKET HOOD SWITCH

OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN

HOOD SWITCH www.omegaweblink.com

LED 1 is solid RED. Insert keyfob 1 into keyport.

Within 10 seconds, LED 1 will ﬂ ash GREEN once (1x).

Remove keyfob 1 from keyport.

LED 1 will turn solid RED. Wait 5 seconds.

Insert keyfob 1 into keyport.

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Remove keyfob 1 from keyport.

WARNING: Follow steps 4, 3, 2 as shown in the wiring diagram to disconnect the module from the vehicle.

Connect module to computer and proceed with KLON programming.

WARNING: Follow steps 2, 3, 4 as shown in the wiring diagram to connect the module to the vehicle.

LED 1 will turn solid RED.

Insert keyfob 1 into keyport.

Within 10 seconds, LED 1 will ﬂ ash GREEN rapidly.

U.S. Patent No. 8,856,780

Page 9 oF 18

DOC.: #20456

• 20150121

LED 1 will turn solid GREEN for 2 seconds.

Remove keyfob 1 from keyport.

Module Programming Procedure completed.

www.omegaweblink.com

NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming.

Insert keyfob into keyport.

VALET MODE PROGRAMMING PROCEDURE - 1 OF 1

Remove keyfob from keyport.

Valet Mode Programming Procedure completed.

To exit valet mode: repeat steps 1 to 6.

Time restriction. Complete next step within 7 seconds.

STOP ACC

START

STOP

Cycle ignition ON fi ve times [5x OFF/ON] rapidly. Parking Light will ﬂ ash once [1x].

Wait, Parking Light will ﬂ ash twice [2x], pause for 1.5 second, then will ﬂ ash once [1x] to indicate that the valet mode is ON or twice [2x] to indicate that the valet mode is OFF.

START

STOP

ON START

Turn ignition to STOP position.

U.S. Patent No. 8,856,780

Page 10 oF 18

DOC.: #20456

• 20150121 www.omegaweblink.com

It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the

Module Navigation will drain vehicle battery.

To exit the Module Navigation at any time:

Follow STEP 13.

Module must be programmed to the vehicle.

Use the Module Navigation Chart on the next page.

START

STOP

ON START

Set ignition to OFF position.

TO ACCESS THE MENUS: Press and hold programming button until LED 1 turns solid

GREEN.

[X]

IN THE MENUS: Press the programming button as many times as the menu number indicates. LED 1 will ﬂ ash GREEN an equal amount of times continuously.

U.S. Patent No. 8,856,780

MODULE NAVIGATION PROCEDURE - 1 OF 1

TO ACCESS THE OPTIONS: Press and hold programming button until LED 1 turns solid

RED.

[Y]

IN THE OPTIONS: Press the programming button as many times as the option number indicates. LED 1 will ﬂ ash RED an equal amount of times continuously.

TO ACCESS THE SETTINGS: Press and hold programming button until LED 1 turns solid

GREEN.

[Z]

LED 1 will ﬂash GREEN as many times as the current (or default) setting number, continuously.

[Z]

IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED 1 will ﬂ ash GREEN an equal amount of times continuously.

To return to the MENUS: exit the Module

Navigation and redo the Module Navigation

Procedure.

OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN

Page 11 oF 18

DOC.: #20456

• 20150121

To save and return to the OPTIONS: Press and hold programming button until LED 1 turns solid RED.

[Y]

LED 1 will ﬂ ash RED as many times as the current option number continuously.

Configure every other setting and proceed to step 13.

MANDATORY: EXIT MODULE NAVIGATION.

Press and hold programming button for 7 seconds. LED 1 will ﬂ ash RED rapidly. Release programming button. LED 1 will turn OFF.

Module navigation completed.

Failure to exit the Module Navigation will drain vehicle battery.

www.omegaweblink.com

moDuLe navigation chaRt - 1 OF 1

Page 12 oF 18

DOC.: #20456

• 20150121

moDuLe navigation chaRt: notes

I Default settings are listed in bold.

II Make sure the option is covered on the vehicle before attempting to change the setting.

*Vehicle will shutdown when a door is opened.

U.S. Patent No. 8,856,780

01 CONFIGURATION

DISARM/UNLOCK BEFORE START

RELOCK AFTER START

RELOCK AFTER SHUTDOWN

FORCE UNLOCK ALL ON FIRST PRESS

TAKEOVER

SECURE TAKEOVER DELAY

FACTORY KEYLESS RS SEQUENCE

MODULE RUN TIME

WAIT TO START DELAY

10-15 N/A

01 N/A

01 oFF

oFF

enabLe

DISABLE*

45 sec

90 SEC

03 MIN

04 MIN

DISABLE

30 MIN

35 MIN

15 min

02 sec

05 SEC

08 SEC

10 SEC

15 SEC

N/A

LOCK + UNLOCK + LOCK

LocK + LocK + LocK

03 MIN

05 MIN

10 MIN

15 MIN

25 MIN

20 SEC

25 SEC

30 SEC

N/A

N/A 02-07 Technical Support only

OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN www.omegaweblink.com

Remote staRteR eRRoR coDes - 1 OF 1

Remote staRteR eRRoR coDes: notes

I WARNING: The following applies only when the parking lights are connected and supported by the system.

II After a remote starter failure, the parking lights will fl ash

[X] number times to indicate an error code. See table.

[X] numbeR oF PaRKing Light FLashes

Foot brake is ON.

Hood is open.

Engine tach signal is lost.

System is in Valet Mode.

Vehicle is moving (VSS).

Glow plug timeout error.

RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.

N/A

CAN communication failure during RS sequence.

Page 13 oF 18

DOC.: #20456

• 20150121

U.S. Patent No. 8,856,780

moDuLe Diagnostics - 1 OF 1 test moDuLe

I DURING PROGRAMMING

II DURING REMOTE START

III WITH IGNITION OFF

Flashing RED

Solid RED

Flashing GREEN

Solid GREEN then OFF

OFF

Flashing RED

Solid RED

Flashing GREEN

Solid GREEN then OFF

OFF

Flashing RED

Solid RED

Flashing GREEN

Solid GREEN then OFF

OFF

Missing/wrong information from fi rmware or vehicle.

Module waiting for more vehicle information.

Additional steps required to complete module programming.

Module correctly programmed.

No activity or module already programmed.

Module incorrectly programmed.

Module correctly programmed and operational.

Reset in progress.

Invalid ground when running status from remote starter.

Module incorrectly programmed or connected.

Module not programmed. Waiting for more vehicle information.

False ground when running status from remote starter.

Reset in progress.

Module at rest and ready for a remote start sequence.

Page 14 oF 18

DOC.: #20456

• 20150121

U.S. Patent No. 8,856,780

Disconnect all connectors from module except the BLACK 20-PIN connector.

MODULE RESET PROCEDURE - 1 OF 1

Reconnect all connectors.

Disconnect the BLACK 20-PIN connector.

Repeat programming procedure.

PRESS AND HOLD programming button while connecting the BLACK 20-PIN connector.

Wait, LED 1 will ﬂash RED. RELEASE programming button.

LED 1 will turn RED for 2 seconds.

Failure to follow procedure may result with a

DTC or a CHECK ENGINE error message.

Module RESET completed.

U.S. Patent No. 8,856,780

Page 15 oF 18

DOC.: #20456

• 20150121 www.omegaweblink.com

All vehicle doors must be closed and locked prior to remote start sequence.

Time restriction. Complete steps 2 to 5 within

45 seconds.

Unlock driver door.

Open driver door and enter vehicle.

Close driver door.

Press and release BRAKE pedal.

U.S. Patent No. 8,856,780

TAKEOVER PROCEDURE - 1 OF 1

Take over procedure completed.

Failure to follow procedure will result in vehicle engine shutdown.

OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN

Page 16 oF 18

DOC.: #20456

• 20150121 www.omegaweblink.com

instaLLation checKList - 1 OF 2

Page 17 oF 18

DOC.: #20456

• 20150121

checKList

WARNING: Vehicle engine will start many times. Test in a well ventillated area.

Open driver door window for easy vehicle access.

Close all vehicle doors, hood and trunk.

Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to step 5.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connection, repeat step 4 and call technical support if the problem persist.

Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to step 6.

NO: Repeat step 5. If problem persists, push vehicle start button once [1x] to shut down the vehicle and call technical support.

Unlock and open driver door.

Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 3: Does the vehicle remote start?

YES: The module does NOT detect the door signal from the vehicle communication network. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle and call technical support.

NO: Go to step 8.

Open hood.

Question 4: Is the orange warning sticker "Sticker 1" placed under the hood?

YES: Leave hood open and go to step 9.

NO: Put the mandatory orange warning sticker "Sticker 1", leave hood open and go to step 9.

Close all doors.

Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 5: Does the vehicle remote start?

YES: Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle. Go to Question 6.

NO: Go to step 11.

Question 6: Is the vehicle equipped with a factory hood switch? (Inside hood latch)

YES: The module does NOT detect the hood signal from the vehicle communication network. Call technical support.

NO: Install the mandatory hood switch included in the kit. Repeat installation checklist.

Close hood.

Enter vehicle. Do NOT press brake pedal.

Close all doors.

Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Wait for the vehicle to start.

Press brake pedal.

Question 7: Does the vehicle shut down?

YES: Go to step 17.

NO: The module does NOT detect the brake pedal signal from the vehicle communication network. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle and call technical support.

Apply parking brake.

Exit vehicle.

U.S. Patent No. 8,856,780

instaLLation checKList - 2 OF 2

checKList

Close all doors.

Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Wait for the vehicle to start.

Question 8: Is the vehicle equipped with Comfort Access System ?

YES: For 1, 5, 6, X5, X6: Touch exterior driver door handle to unlock door using Comfort Access System. Within 45 seconds, go to step 22.

YES: For 3, X1, Z4, Mini: Press UNLOCK button once [1x] on the OEM keyfob. Within 45 seconds, go to step 22.

NO: Press UNLOCK button once [1x] on the OEM keyfob. Within 45 seconds, go to step 22.

Open driver door.

Question 9: Does the vehicle shut down?

YES: For Z4, X5, X6: Go to step 25.

YES: For 1, 3, 5, 6, X1: The module does NOT detect the parking brake signal or the unlock signal from the vehicle communication network. Call technical support.

NO: For Z4, X5, X6: The module does NOT detect the parking brake signal correctly from the vehicle communication network. Call technical support.

NO: For 1, 3, 5, 6, X1: Go to step 23.

Press and release brake pedal.

Push vehicle start button once [1x] to shut down the vehicle.

Installation checklist completed.

Page 18 oF 18

DOC.: #20456

• 20150121

U.S. Patent No. 8,856,780

Hello! I am an AI chatbot specifically trained to assist you with the Omega Link OEM-IDS(RS)-BM1-[OL-RS-BM1]-EN Install Manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated