11 ft x 11 ft CURVED PERGOLA
Product Code: D71 M83028
02628062-8
805670024222
IMPORTANT
SEARS INSISTS ON THE HIGHEST STANDARDS OF
FURNITURE. EACH PIECE HAS BEEN CAREFULLY
INSPECTED BEFORE SHIPMENT.
IN CASE OF PROBLEM,
DO NOT RETURN TO THE
STORE, CALL YOTRIO CORPORATION AT PHONE#
1-866-905-4107
BETWEEN THE HOURS OF
8:30 AM TO 5:00 PM PST, MONDAY THROUGH
FRIDAY, FOR ANY QUESTIONS OR PROBLEM YOU
MAY HAVE.
NOTE:
THIS GAZEBO IS MADE FOR THE PURPOSE OF
PROVIDING LIMITED OITDOOR SUN SHADE AND
NOTHING ELSE. IT IS NOT AS A TOY, A SHELTER
OR A TENT. CHILDREN UNDER AGE OF 12 NEAR
TEH FACILITY SHOULD BE SUPERVISED BY A
COMPETENT AUDIT.
11 x 11 ft Curved Pergola Assembly Instructions
GFM00110B
PARTS LIST
PARTS
NO.
QTY
DESCRIPTION
NAME
A
1 PC Tow Rope Crossbeam 1
B
1 PC Tow Rope Crossbeam 2
C
1 PC
Top Tube
D
2 PCS
Bending Tube 1
E
2 PCS
Bending Tube 2
F
2 PCS
Side Bending Tube 1
G
2 PCS
Side Bending Tube 2
H
2 PCS
Tow Rope Leg Tube
I
2 PCS
Leg Tube
J
K
1 PC
2 PCS
Sunshade
Replacement Canopy
L
M
12 PCS
4 PCS
M6*15 Nuts & Bolts
M5*15 Nuts & Bolts
1
11 x 11 ft Curved Pergola Assembly Instructions
GFM00110B
PARTS LIST
PARTS
NO.
QTY
DESCRIPTION
NAME
N 72 PCS
M6*16 Nuts & Bolts
O
10 PCS
M6*35 Nuts & Bolts
P
Q
8 PCS
2 PCS
M6*72 Nuts & Bolts
Rope Holder
R 1 PC
Top Tube Connector
U
V
S
T
4 PCS
2 PCS
2 PCS
6 PCS
W
4 PCS
X
2 PCS
Y
16 PCS
Z
2 PCS
Base
Decorative Base 1
Decorative Base 2
Decorative Extrusion 1
Decorative Extrusion 2
Sliding Tube
Ground Spike
Allen Wrench
2
11 x 11 ft Curved Pergola Assembly Instructions
GFM00110B
Step 1:
Insert Side Bending Tube 1 (F) into Side Bending Tube 2 (G), then align all bolt holes and fasten by using M6*16 Nuts & Bolts (N).
F
G
N
F
G
1
Step 2:
Insert Bending Tube 1 (D) into Bending Tube 2 (E), then align all bolt holes and fasten by using M6*16 Nuts & Bolts (N).
D
N
D
E
2
E
3
11 x 11 ft Curved Pergola Assembly Instructions
GFM00110B
Step 3:
Put the tube joint of Tow Rope Crossbeam 1 (A) and Tow Rope
Crossbeam 2 (B) close to Top Tube (C), then embed Top Tube
Connector (R) into joint and fasten by using M6*16 Nuts & Bolts (N).
Step 4:
Put the final assembled Bending Tube D and E close to Top Tube (C), then align all bolt holes and fastened by using M6*35 Nuts & Bolts (O).
Step 5:
Put the final assembled Side bending Tube F and G close to Top Tube
(C), then align all bolt holes and fasten by using M6*35 Nuts & Bolts (O).
Step 6:
Line up the bolt holes on the assembled tube with corresponding bolt holes on Tow Rope Crossbeam A and B, then screw in the M6*16 Nuts
& Bolts (N).
R
C
A
N
B
3
O
F
D
A
G
E
D
B
F
E
G
4
5
F
G
O
B
G
N
N
G
N B
6
4
11 x 11 ft Curved Pergola Assembly Instructions
GFM00110B
Step 7:
Unfold the Replacement Canopy (K), insert the tube joint on Canopy (K) one with another. Then put it close to Top Tube (C) and tighten by using
M6*35 Nuts & Bolts (O).
k
O
O
O c
7
O x k x
L
8
Step 8:
Insert the Sliding Tube (X) into the Replacement Canopy (K) and pass through pulley until it reaches to the other end. Then insert the tube joint on Canopy (K) one with another through pulley. Finally, align the holes on the pulley as well as Canopy (K) by using M6*15 Nuts & Bolts (L) and tighten it.
5
11 x 11 ft Curved Pergola Assembly Instructions
GFM00110B
Step 9:
Lay the Sunshade (J) onto the top of the pergola. Line up the bolt holes on the Sunshade with corresponding holes on the top, then screw in the M6*16 Nuts & Bolts (N).
N
F
J
G
J
N
K
N
J
N
9
N
J
N
6
11 x 11 ft Curved Pergola Assembly Instructions
GFM00110B
Step 10:
1). Embed Decorative Base 1 (T) and Decorative Base 2 (U) into Tow
Rope Leg Tube (H) and Leg Tube (I) respectively, then screw in the
M6*16 Nuts & Bolts (N).
2). Align all bolt holes on Base (S) with corresponding bolt holes on
Leg Tube H and I and screw together by using M6*16 Nuts & Bolts (N) with Allen Wrench (Z).
H
S
N
10
I
T
H
N
U
H
N
S
N
U
I
N
I
T
N
7
11 x 11 ft Curved Pergola Assembly Instructions
GFM00110B
Step 11:
1). Lift the whole top and make sure all leg tubes are in place. Align all bolt holes on the top tube with corresponding bolt holes on Leg Tube H and I and screw together by using M6*16 Nuts & Bolts (N) and M6*72
Nuts & Bolts (P).
2). Align all bolt holes on Decorative Extrusion 2 (W) and Decorative
Extrusion 1 (V) with corresponding bolt holes and screw together by using M6*16 Nuts & Bolts (N).
N P
1
11
N
V
2
I
P
N
H
I
N
W
H
Step 12:
Screw the Rope Holder (Q) onto the Tow Rope Leg Tube (H) by using
M5*15 Nuts & Bolts (M).
H
Q
M
12
H
I
I
8
11 x 11 ft Curved Pergola Assembly Instructions
GFM00110B
Step 13:
Insert the Ground Spike (Y) into the corresponding holes on the
Base (S) to fix leg tubes.
S
Y
13
See our extensive assortment of outdoor living products on-line at www.sears.com and www. kmart.com.
9
CARING FOR YOUR OUTDOOR GAZEBO
Please keep this page for your records.
CARING FOR STEEL FRAMES
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with exposure to the elements. In case of rust or scratches, lightly sand the affected area and apply touch-up paint. Periodically treat frames with a liquid wax for added protection against UV rays. Wash with a mild solution of soap and water; rinse thoroughly. Dry frames completely. Do not use bleach or solvents. Cover furniture with outdoor-furniture covers when not in use. Disassemble and store gazebo indoors during winter months.
CARING FOR A GAZEBO CANOPY
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents. Store canopy indoors during winter months to prevent collapse.
ASSEMBLY
Always assemble your gazebo on a soft, non-abrasive surface. The gazebo is heavy; use care when handling. Assembly by two adults is recommended. Follow manufacturer’s instructions carefully.
WARNING
This gazebo is not intended to be a permanent structure. Disassemble it during high winds or inclement weather to avoid damage. KEEP AWAY
FROM OPEN FLAME AND OTHER SOURCES OF HEAT. Even canopies made with flame-resistant fabric are not fireproof and should never be allowed to come into contact with any source of heat.
