Cooler Master V8 GTS User Manual

Te A ArT
ver1.0 2015/01
Make sure the following items are included. If any item is damaged or missing, contact your retailer.
CPU Cooler x 1 Back Plate x 1 AMD Back Plate x 1 Intel® Retention Plate x 2 us
© © © 9 ©
Ps ss Ce Æ Æ
Ta ФФ ss © © 5 5
AMD Retention Stand-offs x 4
Plate(2) x 2 SIR Bis For Intel LGA 2011 only Nuts x 4 Screws x 4
© o © o ©
® A © © A „””
Anti-vibration Silent mode E
Screws Xx 2 Thermal grease x 1 soft pads x 1 Wrench x 1 adapter x 1
Installation Procedures.
> ТЕ I |
НТ ||
1. Before use, please remove the protective layer on the bottom of the cooler.
2. Apply a thin layer of thermal grease onto the surface of the cooler base.
_Intel” Socket LGA 1366/1156/1155/1150/775
1. Select proper backplate according to your motherboard platform.
2. Fasten 4 stand-offs on the backplate screw.
3. Select proper mounting brackets corresponding to the Intel socket. Fasten bracket on the cooler with 2 screws.
4. Fasten the cooler to the motherboard with the help of the supplied wrench. e
“Intel® Socket LGA 2011
1. Fasten 4 stand-offs on the backplate screw.
2. Select proper mounting brackets corresponding to the Intel socket. Fasten bracket on the cooler with 2 screws.
3. Fasten the cooler to the motherboard with the help of the supplied wrench.
his manual or product.
E ‘ M N \
1.Remove screws and plastic bracket from AMD motherboard.
2.Place 4 anti-vibration soft pads on screw holes next to CPU socket,
3.Fasten AMD bracket on cooler with 2 screws.
4.Fasten the cooler to the motherboard with the help of the supplied wrench.
1. Connect the power cable.
Note: If you connect the fan cable to 3-pin
connector on the motherboard, the PWM
function will not work,
* Pictures are for reference only,
* Information in this document 15 subject
to change without notice,
In no event shall Cooler Master be liable for any special, indirect, incidental or
consequential damages arising from any defect or error in this manual or product.
website: nttp;// www,coolermaster.com S10007790-GFP
For the most updated information, pl visit our official
">