installationguide ScreenBeam Mini 2 ™ Catalog# SBWD60A This Installation Guide provides step-by-step instructions on how to set up your ScreenBeam Mini 2 Wireless Display Receiver. A. Install the receiver . . . . . . . . . . . . . . . . . . 1 B. Connect your device Windows 8.1 device . . . . . . . . . . . . . . . . . . . . . . 2 Windows 10 device . . . . . . . . . . . . . . . . . . . . . . 4 Miracast™-enabled Android device . . . . . . . . . . . . . . 5 C. Switch display modes Windows 8.1 device . . . . . . . . . . . . . . . . . . . . . . 6 Windows 10 device . . . . . . . . . . . . . . . . . . . . . . 7 D. Install ScreenBeam Configurator . . . . . . 8 screenbeam.com A. Install the receiver 1. Remove the receiver, power adapter, USB cable, and HDMI extension cable from the box. 2. Plug the small male connector of the USB cable to the receiver’s micro USB port labeled Power. 3. Plug the receiver into an available HDMI port on your HDTV. Note: If the receiver cannot reach the HDMI port on your TV, use the provided HDMI extension cable to connect the receiver. 4. Plug the large male connector of the USB cable to the power adapter and plug the power adapter into a power outlet. 5. Turn on your TV and switch the input source until you see the Ready to Connect screen. Optional HDMI Extension Cable Power Adapter Power Outlet screenbeam.com | 1 B. Connect your Windows 8.1 device Windows 8.1 Devices 1. From the Windows desktop, navigate to the Charms menu and select Devices. You can also use the shortcut keys + K. 3. From the Project screen, select Add a wireless display. 2 | screenbeam.com 2. From the Devices menu, click the Project icon. 4. Select your receiver from the list. Note: This is the same receiver name that appears on the Ready to Connect screen on your TV. 5. Enter the PIN as displayed on the TV screen. screenbeam.com | 3 B. Connect your Windows 10 device Windows 10 Devices 1. Click the Notifications icon in the bottom-right corner of desktop, and then select Connect to open the wireless display receiver list, or use the shortcut keys + K. Select your receiver from the list. Note: This is the same receiver name that appears on the TV’s Ready to Connect screen. 2. Enter the PIN as displayed on the TV screen. 4 | screenbeam.com B. Connect your Android device Miracast-Enabled Android Devices You can also connect to the receiver from a Miracast-enabled Android device, such as a smartphone, tablet, or gaming console (find the wireless display feature in Settings). Note: The device should be running the latest software for best performance. 1. On a Miracast-enabled Android device, locate and open the Wireless Display Application. Note: The name of the Wireless Display Application depends on the device type and model. Refer to the device’s carrier or manufacturer user manual for more details. 2. Select the ScreenBeam receiver from the Wireless Display Application’s list of available receivers. 3. You may be required to enter a PIN code. Enter the PIN as displayed on the TV screen. screenbeam.com | 5 C. Switch display modes When connected with a compatible wireless display application, the receiver supports three display modes (Duplicate, Extend and Second Screen Only). Windows 8.1 Click Charms menu, select Devices, and then Project to launch the display options. Select the desired display mode. You can also use the shortcut keys + P. 6 | screenbeam.com Windows 10 Click the Notifications icon in the bottom-right corner of desktop, and click Project to launch the display options and select the desired display mode. You can also use the shortcut keys + P. screenbeam.com | 7 D. Install ScreenBeam Configurator Actiontec’s ScreenBeam Configurator allows users to wirelessly configure and upgrade ScreenBeam Mini 2 receiver. Please go to http://actiontec.zendesk.com and refer to the Configurator user manual for details. 8 | screenbeam.com Visit actiontec.zendesk.com for more information • User Manual • Troubleshooting Tips • FAQs Support: (888) 436-0657 Support email: [email protected] P/N 0530-0817-000 © 2017 All rights reserved. Actiontec and the Actiontec logo are registered trademarks, and ScreenBeam is a trademark of Actiontec Electronics, Inc. All other names are properties of their respective owners. Specifications subject to change without notice. 072417 screenbeam.com
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement