Sharper Image Jellyfish Aquarium Owner's manual

Sharper Image Jellyfish Aquarium Owner's manual
JELLYFISH AQUARIUM
Item No. 206941
User Guide
Thank you for purchasing the Sharper Image Jellyfish Aquarium. Please take a moment to
review these instructions and retain them for future reference.
-1-
1. FILLING THE TANK
• Remove the
rubber cap
2. PLUGGING IN THE DEVICE
• Fill the aquarium
to the top with
distilled water
• Connect A end to the
base
• Plug B end into an AC
outlet
• Turn on the switch
3. ADDING THE LIFELIKE JELLYFISH
• Add 2-3 drops of liquid
dish washing soap
to the water in the
aquarium
• Place the jellyfish upsidedown in the filled aquarium
• Try to avoid air bubbles. If
necessary, use a straw or
a stick to break up any air
bubbles
• Note: Allow the aquarium
run for at least 30 seconds
before adding the jellyfish
• Replace the rubber
plug and the plastic
cap
• Press the ON button
to activate the lamp
in automatic colorchanging mode
• Press the SELECT button
to toggle through the 5
different colors
4. MAINTENANCE
• Handle the aquarium with care
• Always place the aquarium on a
flat surface
• Use a soft cloth to dry the outside
of the aquarium if needed
• Change the water occasionally
if it appears dirty
IMPORTANT
This unit will turn off automatically after 4 hours of operation. Please leave the unit OFF for 1 hour
before reactivating the aquarium.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you have any questions not covered in this guide, please call our Customer
Service department at 1 (877) 210-3449. Customer Service agents are available Monday through
Friday, 9:00 a.m. to 6:00 p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
-2-
JELLYFISH AQUARIUM
QUICK START GUIDE
1. Carefully fill tank with water.
2. Add Jellyfish into water.
3. Turn Aquarium ON.
HELPFUL TIPS:
• After aquarium is turned on, wait for bubbles to dissolve
• It may take 24-48 hours for bubbles to dissolve and jellyfish float and swim
properly
• Use straw/stick to shake jellyfish in water in order to remove bubbles from
jellyfish’s body
• If bubbles have all dissolved and aquarium is turned to OFF mode, the jellyfish
will sink to bottom until aquarium is powered back ON and ready to be enjoyed
again
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement