GRAVITY DOOR ASSEMBLY Installation Instructions 7629353 Q-Model Dispenser 1. 2. 3. 4. Disconnect power supply. Remove front door panel assembly. Remove the three Phillips head screws and washers that hold the gravity door assembly and restrictor bracket. In order for the new assembly to fit, it is necessary to notch the top portion of the inner access chute area with a hacksaw, as shown. 5. Reinstall the gravity door assembly and restrictor bracket. 6. Once installed, make sure that the gravity door moves freely.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021