KJB Security 007-DVR150WF Owner's manual

KJB Security 007-DVR150WF Owner's manual
Wi-Fi USB Charger DVR Manual
Table of Contents
Warnings & Precautions
2
Includes
4
Quick Setup Guide
5
Features
6
Setup
6
Zone Shield EZ Menu and Settings
16
Playback
19
Frequently Asked Questions
20
Specifications
22
Warranty & Disclaimers
23
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
****IMPORTANT****
****SECURITY ADVISORY****
****READ BEFORE SET-UP****
The set-up procedure for your new Wi-Fi Camera System uses a default Username and
Password provided to you from the manufacturer. After you have completed the set-up
procedure for your new Wi-Fi Camera System it is essential that you immediately change
both the Username and Password to a unique name and code of your choosing. Failure
to change both the Username and Password will severely compromise the security and
privacy for your Wi-Fi Camera System.
**WARNING** THE DEFAULT USERNAME AND PASSWORD IS FOR
MANUFACTURING TESTING AND FIRST-TIME SET UP ONLY! IT IS NOT
UNIQUE TO YOUR DEVICE OR INTENDED FOR USE AS A PRIVATE SECURE
PASSWORD. FAILURE TO CHANGE FROM THE DEFAULT FACTORY
SUPPLIED USERNAME AND PASSWORD EXPOSES YOU TO
UNAUTHORIZED ACCESS AND VIEWING OF YOUR WI-FI DEVICE!
The internet is a public place and if you do not change the Username and Password, but
continue to use the default Username and Password, you are risking your privacy! There
is great potential risk that unauthorized individuals could access your video. It is your
responsibility and the User in Control to maintain the privacy and security of your content
when using this or any Wi-Fi devices.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Do not open/modify the device, as it may cause damage to the unit and void the
Warranty. For internal repairs, consult your dealer or an Authorized Service Center.
Do not use any accessories or power supplies other than what comes with the device,
otherwise it could void the warranty
Protect from humidity. Do not put it in water and be careful to protect it from rain,
sea water, or high humidity environment. Do not operate the unit near a bath tub,
shower, sink, swimming pool, etc.
Protect from high temperatures. To avoid mis-operation of the device, only use in
temperature of 0 ~ +40°C(32 ~ 104°F).
Do not bring the device suddenly from a hot to a cold place, or vice versa. This may
cause damage to the inside of the unit by creating condensation.
EU Environmental Protection
The symbol of crossed-out garbage shows that this product should not be treated as
household waste, as it falls into the category of electric/electronic equipment for
recycling. This electronic device should not be disposed of in regular trash. We
strongly advise you to contact your local authority for proper disposal of this product.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Includes
 Wi-Fi AC Adaptor with Camera
 Card Reader
 Reset Pin
 User Manual
1
…
…
...
2
5
3
6
1. Hidden Camera and IR’s
4. LED Light Indicator
2. USB Charge Port
5. Micro Memory Card Slot
3. Pinhole Reset Button
6. UID / QR Code
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Introduction
With the Zone Shield EZ Wi-Fi hidden camera you will be protecting your most valuable assets
in minutes. There are a couple of things you should do before you get started. First, read the
whole manual first, as this makes setting up your device quick and easy. Next, understand what
you need to connect your device. Follow the steps in order to avoid any issue. If you do have any
questions, feel free to look at our FAQs or call us, as we are always happy to help.
Understanding how to connect the Zone Shield EZ Wi-Fi hidden camera: First download our
App “Zone Shield EZ” from the App Store or Google Play Store. Next, your smart device has to
connect to the camera’s Wi-Fi network, called Wi-Fi Direct(P-P), which is a Wi-Fi standard
enabling devices to easily connect with each other without requiring a wireless access
point/router. With this connection, you can go anywhere within range of the AC Adaptor with
your smartphone or tablet and view the video in the app. To view from anywhere away from
your home/office, you have to connect the camera to a wireless access point/router(P-I). Once
setup, you can view your video from the app wherever you are, at any time.
As with all wireless devices, it takes a little patience and a good, strong Wi-Fi signal to run video
over a network. Keep in mind, we do not know your Wi-Fi environment and cannot test every
router or smart device made, so it’s up to you, the user, to meet the minimum requirements
needed to run this device.
Quick Setup Guide
1. Remove the bottom cover to insert the memory card (see pg. 4) and plug the AC Adaptor
into an electrical outlet.
2. Download and install the “Zone Shield EZ” App from the App Store or Google Play to
your smartphone or tablet.
3. On your smartphone or tablet, go to your list of available Wi-Fi networks and connect to
the “CM****-************-******” Wi-Fi network.
4. Open the “Zone Shield EZ” App. Press the + symbol in the top right corner, then press
the “Search (LAN)” button in the middle of the next screen. Tap on the camera name in
the search results list to select it, which will return you to the previous screen. Press “OK”
to add the camera to the app. You are now directly connected (P-P) and the camera will
show “Online”. As long as your smart phone or tablet is in range of your Wi-Fi signal, you
will see streaming live video. For remote viewing over the internet, follow step 5 below.
5. Press the
symbol to the right of the camera in the camera list. Press “Advance
Config” and then “Wi-Fi Config” in the menus. Select your local Wi-Fi network from the
dropdown box and type in your password. Press “OK” to save the credentials, then press
“OK” again to confirm and send them to the camera. The camera will reboot and take 1-2
minutes to come back online. Once the camera reboots, it is now ready for live viewing.
Be sure to change the default password to a unique password.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Features
 High-definition camera
 IR’s for help to see in the dark (camera will be in black and white when this feature is used)
 1080p | 720p | 640 | 320 resolution recording
 Supports up to 32GB memory card storage, for up to 8 hours of video recording
 2 recording modes - Continuous or Motion detection
 Time and Date video stamp
 5V USB output, 500mA max
 25 fps
Setup
Zone Shield EZ App Installation
Search for the “Zone Shield EZ” App in the App Store (iOS) or Google Play Store
(Android) and install it on your smart phone or tablet.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Adding Your Camera
To connect your camera to your smart device for direct connect (P-P) viewing:
1. Remove the bottom cover to insert the memory card (see pg. 4) and plug the AC Adaptor
into an electrical outlet.
2. Download and install the “Zone Shield EZ” App from the App Store or Google Play to
your smartphone or tablet.
3. On your smartphone or tablet, go to your list of available Wi-Fi networks and connect to
the “CM****-************-******” Wi-Fi network. It may take 1-2 minutes for the
network to appear in your network list.
4. Open the Zone Shield EZ App. Press the + symbol in the top right corner.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
5. Press “Search (LAN)” button.
6. Tap on the camera name in the search results list to select it, which will return you to the
previous screen.
7. Press “OK” to add the camera to your main camera list. The camera will show “Online”,
and you are in P-P (direct connect) mode.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Note: After successful connection, IT IS HIGHLY RECOMMENDED FOR SECURE
VIEWING YOU CHANGE YOUR CAMERA NAME AND PASSWORD ON THE APP (see
pg.18 for detailed instructions). If you see a camera status saying “Wrong Password”, make sure
your UID and Password are correct.
Connecting Your Camera to Your Wi-Fi Network
To connect your camera to your home Wi-Fi network:
1. Press the
symbol to the right of the camera in the camera list.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
2. Press “Advance Config”.
3. Press “Wi-Fi Config”.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
4. Select your wireless network from the dropdown box, then enter it’s password in the box
below. Press “OK” to save the credentials.
5. Press “OK” again to confirm and send the credentials to the camera. Allow 1-2 minutes for
the camera to reboot and come online.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Add Your Camera to Another Smart Device – 2 Methods
Method 1: Adding the Camera to a Second Smart Device on Same Local Network
1. Open the Zone Shield EZ App. Press the
+ symbol in the top right corner.
2. Press “Search (LAN)” button.
3. Press the camera name in the search results list to select it, which will return you to the
previous screen.
4. Press “OK” to add the camera to your main camera list. The camera will show “Online”,
and you are automatically in P-I (Wi-Fi network) mode.
Method 2: Adding the Camera to a Second Smart Device on Different Networks
1. Open the Zone Shield EZ App. Press the
+ symbol in the top right corner.
2. Fill in the camera UID and Password (8888 by default) manually.
3. Press “OK” to add the camera to your main camera list. The camera will show “Online”,
and you are automatically in P-I (Wi-Fi network) mode.
Note: Please refer to pg. 7 for related screenshots.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Live Video
To access the Live View screen, press the
Video tab.
icon in the top right corner of the Live
Camera UID
Camera Name
Camera Settings
Camera Status/
User Number
Snapshot: View
Snapshot Pictures
Record: View
Recorded Videos
Alarm: View
Triggered Alarms
Brightness
Resolution
Contrast
Horizontal
Image
Rotation
Snapshot
Vertical
Image
Rotation
Audio
(Law Enforcement/ Export Only)
Record
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Night Vision
Manual Night Vision IRs, turned on via App by selecting LED icon. LEDs will remain on
and picture will be black & white until turned off.
Snapshot
To access your Snapshots, press on the Snapshot tab on the bottom.
Press on the
icon in the top right corner to filter Snapshots by camera name.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Scroll through the slideshow on the bottom of the page to see all of your available
Snapshots. Select the one you want to see and it will enlarge.
Record
To access and Playback your recorded video files, see pg. 20.
Alarm
To access your triggered alarms, press the Alarm tab on the bottom of the screen.
Press on the
icon in the top right corner to filter Snapshots by camera name.
When an alarm is triggered, it will take a series of pictures to go along with it. Scroll up
and down the page to see all triggered alarms. See pg. 19 for alarm setup.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Zone Shield EZ Menu and Settings
To access all of the camera settings, press the
settings while in the Live Video tab.
icon on the camera you want to access
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Modify Camera
Press “Modify Camera” to change the name of your camera. The default name is “Cam”.
Delete Camera
Press “Delete Camera” to delete your camera and take it off of the camera list.
Note: There is no confirmation pop-up when deleting. Once you press “Delete Device”, it
is taken off of the list. However, adding the device back on, if accidentally deleted, is
simple. See pg. 12 add the camera back to your smart device.
Reconnect
Press “Reconnect” to re-establish the P-P or P-I connection. It will also function as a
“refresh” button, and will update status and users.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Device Settings
Press “Alarm Config” to set up motion alarms and push notifications.
Press “Wi-Fi Config” to select a new Wi-Fi network for your camera.
Press “SD Card Record Config” to adjust the settings for your SD card and recorded files.
Press “Time Settings” to time format, current time, time zone, and select Daylight Savings
Time.
Press “Email Config” to set up an email for alarms to be sent to.
Press “FTP Config” for advanced FTP server settings.
Press “DDNS Config” for advanced DDNS server settings.
Press “Misc Settings” to select how you want the LEDs on your camera to flash (On, Off,
or Flicker).
Press “Change P-P Access Password” to change the P-P password (8888) for the camera.
Press “Device Reboot” to restart the camera back to the default settings.
Note: For the full manual with detailed setting configuration and setting menus, please visit:
www.kjbsecurity.com/technical-support/docs
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Playback
There are two ways to playback recorded video files: from the memory card or from your
smartphone or tablet.
Smartphone/ Tablet
1. From the camera list, press the
tab.
icon on the bottom of the screen to go to the Record
2. Select the source for the video files in the dropdown box: Remote SD Card or Downloaded.
You can also see the video files currently downloading and files on the local network.
3. Press on the video file you want to watch. You can also press and hold on a video file
while on the Remote SD Card to download the file to your smart device.
4. Press on the
icon in the top right corner to filter video files by camera name.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Memory Card
1.
2.
3.
4.
5.
Stop any recording of video files, then remove the camera from the power outlet.
Format the SD card before 1st use.
Place the memory card into an adapter or card reader for a computer.
Navigate to the recorded video files in the root directory.
Use a media player such as Windows Media Player or VLC Media Player to playback the
video files.
6. Backup, save, or delete the files as desired.
7. Use the computer’s “safe remove” function to safely eject the memory card from the
operating system prior to physically removing the memory card from the computer to
prevent file or card corruption.
Frequently Asked Questions
Q. Where can I find more info on settings and configuration?
A. Please download and read our full manual for more detailed settings configuration and menus.
You can get the manual at: www.kjbsecurity.com/technical-support/docs
Q. Where can I find more info on settings and configuration?
A. Please download and read our full manual for more detailed settings configuration and menus.
Q. I can’t find the Wi-Fi signal on my smartphone/tablet?
A. There are 3 things that can be done to restart the Wi-Fi signal:
1. Unplug the adaptor from the wall outlet and plug back in. Wait 2 minutes for reboot.
2. Press and hold the reset button. Wait 2 minutes for reboot.
3. Turn off the smartphone/tablet Wi-Fi function for a minute and turn back on to search
again.
Q. What size memory cards can I used in this device?
A. Most memory cards, of up to and including 32GB capacity, are supported. If a memory card
does not appear to work, try removing and formatting the memory card using a computer before
trying it in the device again.
Q. Why did I not get a recording when I know there was motion in front of the device?
A. The motion was not detected because it was too little, too quick or too far away. Make test
recordings to discover the limits of detection in your given placement and environment.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Q. Why will my video file not play or the file is corrupted?
A. If the device does not stop any current recording prior to removing it from power, the files on
the memory card, or the memory card itself, may become corrupted. Make sure to always
properly stop any current video recordings.
Q. How many cameras can be added to the app?
A. There is no limit to the amount of cameras that can be added to the app.
Q. Why do I only see part of my desired surveillance target?
A. Placement of any device is a very important step in setup. Be sure to make test recordings of
the desired area of surveillance prior to final setup to ensure the device can perform as desired in
your given environment. This should not only include what area can be captured by video, but
also testing the ability to properly trigger recording in the area if using Motion Detection mode.
Q. How many visitors/viewers are allowed to see the live view at a time?
A. Two viewers max.
Q. Why can’t I find my recorded files on my memory card?
A. Recorded files are saved directly in the root menu of the memory card. If you cannot see any
recordings and you are certain your camera should have recorded video, your memory card may
be corrupt. Please format your memory card and make test recordings to ensure your card is
storing the files.
Q. How do I reset the device? I forgot my password, or unit is acting abnormal.
A. If you wish to reset the device back to factory defaults, press and hold the Reset button on the
side of the unit (see pg. 4) for 5 seconds while the blue light is lit up on the side of the device
(see pg. 4). Please wait 2 minutes for the Wi-Fi to boot back up. Usually, the reset button fixes
any abnormalities the device is experiencing.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Specifications
Camera
Video Files
Memory
Other
Image Sensor
5.0 MP CMOS
Effective Pixels
1920 x 1080; 1080p
Motion Detection Range
6 meters, straight line-of-sight
Camera Angle
90º
File Type
.AVI
Video Standard
H.264
Resolution
1080p / 720p
Frame Rate
25 fps
Playback Software
VLC Player / Windows Media Player
Type
Micro SD card; Class 4/10 & HC
Max Capacity
32GB
Smartphone/Tablet OS
Android / iOS
Power Supply
Input: 100-240V / .3A
USB Output: 5V / 500mA
Power Consumption
300mAh / 3.7V
Storage Temperature
-4°F to 176°F
Working Temperature
14°F to 140°F
Working Humidity
15 ~ 85%
Dimensions(in.)
3.0” x 2.0” x 1.0” (w/o outlet prongs)
Weight
1.6 oz
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Manufacturer’s Limited Warranty
Manufacturer warrants all Covert Video and Sleuth Gear Hidden Video Products (Product)
assembled and sold by Manufacturer to be free of defects in material and workmanship, subject
to the following conditions. The duration of Manufacturer's warranty with respect to the Product
is limited to one (1) year from the date of sale to the original consumer purchaser only for
Products delivered within the fifty (50) states of the United States, District of Columbia, or the
possessions and territories of the United States
No other express warranties are made with respect to any Product. All implied warranties,
including warranties of merchantability and fitness for a particular purpose are limited to
the warranty period set forth above. This warranty is not transferable and applies only to
the original consumer purchaser of the Product.
Manufacturer will, as its sole obligation under this warranty, replace or repair, at its option, any
Product that does not conform to this warranty. Under no circumstances will the Manufacturer
issue credit or give a refund for Product covered by this warranty. Furthermore, under no
circumstances will Manufacturer be liable for any incidental or consequential damages under this
warranty or any implied warranties.
What is not covered:
This limited warranty does not cover Products that in Manufacturer’s judgment have damage
resulting from any (i) deviation from Manufacturer's operating instructions as printed in
Manufacturer's catalog or on any packaging, labels or other literature provided with a Product, (ii)
installation of a Product in a manner which is inconsistent with Manufacturer's written
instructions, (iii) alteration, modification of or tampering with a Product, (iv) misuse, (v) neglect,
(vi) abuse, (vii) accident, (viii) power surge, static electricity or other electrical discharge, (ix)
normal wear and tear, (x) commercial use, (xi) service by anyone other than a Manufacturer
authorized repair facility, or (xii) other improper application, installation or operation of the
Product. Or, (xiii) have been purchased from inventory clearance or liquidation sales or other
sales in which Manufacturer expressly disclaims its warranty obligation pertaining to the
Product.
How you (the Customer) can get service:
To obtain warranty service during the warranty period, you must return the defective Product
with the original receipt to the original place of purchase. Contact them for return instructions.
If warranty service is needed at any time during the warranty period, the purchaser will be
required to furnish a sales receipt/proof of purchase indicating the date of purchase, amount paid
and place of purchase. Customers who fail to provide such proof of purchase will be charged for
the repair of any Product.
How state law relates to the warranty:
Some states do not allow limitations on how long implied warranties last, or the exclusion or the
limitation of incidental or consequential damages. So the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights. You may also have other rights that
may vary from state to state.
NO PERSON IS AUTHORIZED BY MANUFACTURER TO MODIFY OR ADD TO THIS
LIMITED WARRANTY.
For warranty information on Products delivered outside the United States please contact
the original place of purchase.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
DO NOT ATTEMPT TO RETURN PRODCUT TO ORIGINAL MANUFACTURER, AS THIS
PRODUCT HAS BEEN MODIFIED AND IS NO LONGER SUBJECT TO ORIGINAL
MANUFACTURER’S WARRANTY. IN THE CASE OF A DEFECTIVE PRODUCT,
CONTACT PLACE OF PURCHASE FOR RETURN PROCEDURE.
IT IS THE USER’S RESPONSIBILITY TO ENSURE THAT THIS EQUIPMENT IS USED IN
ACCORDANCE WITH THE LAW(S) OF THE JURISDICTION IN WHICH THIS
EQUIPMENT IS UTILIZED.
THIS PRODUCT MAY BE SUBJECT TO THE JURISDICTION OF THE U.S. WIRE AND
COMMUNICATIONS ACT (18 UNITED STATES CODE §§ 2510-2522) (HEREINAFTER
REFERRED TO AS “ACT”) REGARDING SURREPTITIOUS RECORDING
DEVICES.
THE USES OF SUCH PRODUCTS ARE REGULATED BY THE
ACT. ADDITIONALLY, THE LAWS OF SOME STATES, COUNTIES, CITIES
OR LOCALITIES MAY PROHIBIT THE POSSESSION AND/OR USE OF THIS OR
SIMILAR PRODUCTS. IT IS THE RESPONSIBILITY OF THE RETAIL BUYER AND/OR
FINAL CONSUMER (HEREINAFTER REFERRED AS “BUYER”) TO ASCERTAIN,
UNDERSTAND, AND OBEY ANY AND ALL APPLICABLE LOCAL, STATE, AND
FEDERAL LAWS REGARDING POSSESSION AND USE OF THIS PRODUCT. BY
PURCHASING THIS PRODUCT THE BUYER REPRESENTS THAT IT WILL INDEMNIFY
THE MANUFACTURER AND/OR DISTRIBUTOR AND HOLD THEM HARMLESS FOR
ANY POSSESSION, USE AND/OR MISUSE THAT VIOLATE ANY FEDERAL, STATE OR
LOCAL LAW OR REGULATION REGARDING AUDIO AND/OR VIDEO DEVICES.
BUYER AGREES TO CONSULT WITH AN ATTORNEY AT LAW REGARDING
POSSESSION OR APPROPRIATE USE OF A COVERT DEVICE. NOTE THAT LAWS AND
REGULATIONS VARY FROM STATE TO STATE. IF BUYER EXPORTS THIS PRODUCT,
THE BUYER WILL COMPLY WITH US EXPORT CONTROL LAWS AND ANY
APPLICABLE DEPARTMENT OF COMMERCE, STATE AND TREASURY REGULATIONS
GOVERNING EXPORTS AND SALES TO PROHIBITED END USERS. DIVERSION OR
RE-EXPORT CONTRARY TO U.S. LAW IS PROHIBITED. BUYER SHALL COMPLY WITH
ALL APPLICABLE FEDERAL, STATE, AND LOCAL LAWS AND REGULATIONS
GOVERNING THE SALE OF THIS PRODUCT, INCLUDING U.S. EXPORT CONTROL
LAWS AND THE U.S. DEPARTMENT OF COMMERCE AND TREASURY REGULATIONS
GOVERNING SALES TO PROHIBITED END USERS.
PART 15 LOW POWER: ANY CHANGES OR MODIFICATIONS TO THIS EQUIPMENT
WITHOUT THE EXPESS AUTHORIZATION OF THE MANUFACTURER COULD VOID
THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT(RULE 15.21 OF THE FCC).
THIS EQUIPMENT HAS BEEN TESTED AND HAS BEEN FOUND TO BE IN
COMPLIANCE WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO
PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTIONS AGAINST HARMFUL INTERFERENCE IN A
RESIDENTIAL INSTALLATION. THIS EQUIPMENT USES, GENERATES AND CAN
RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN
ACCORDANCE WITH INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO
RADIO COMMUNICATIONS.
K J B S e c u r i t y P r o d u c t s | w w w. k j b s e c u r i t y. c o m | 8 0 0 . 5 9 0 . 4 2 7 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement