Miele CVA 7845 Owner Manual

Add to My manuals
116 Pages

advertisement

Miele CVA 7845 Owner Manual | Manualzz

Operating and installation instructions

Built-in coffee machine

To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.

en-GB M.-Nr. 11 203 280

Caring for the environment

Disposal of the packing material

The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled.

Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.

Disposing of cleaning and descaling cartridges

Dispose of used Miele cleaning and descaling cartridges in your household waste.

Disposing of your old appliance

Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety. These could be hazardous to human health and to the environment if disposed of with your domestic waste or if handled incorrectly. Please do not, therefore, dispose of your old appliance with your household waste.

Please dispose of it at your local community waste collection / recycling centre for electrical and electronic appliances, or contact your dealer or

Miele for advice. You are also responsible (by law, depending on country) for deleting any personal data that may be stored on the appliance being disposed of. Please ensure that your old appliance poses no risk to children while being stored prior to disposal.

2

Contents

Caring for the environment ..................................................................................  2

Warning and Safety instructions ..........................................................................  7

Guide to the machine .........................................................................................  17

Operation ..............................................................................................................  19

Touch display ........................................................................................................ 19

Operating actions .................................................................................................. 20

Symbols in the display .......................................................................................... 23

Miele@home .........................................................................................................  24

Before using for the first time ............................................................................  25

Before using for the first time ................................................................................ 25

Switching on for the first time ............................................................................... 25

Setting up the bean system .................................................................................. 28

Bean system ........................................................................................................  30

Changing bean system settings (Type of beans)................................................... 30

Renaming the type of beans ............................................................................ 30

Changing how the bean containers are allocated............................................ 31

Filling the water container ..................................................................................  32

Switching on and off ...........................................................................................  33

Spout adjustment ................................................................................................  34

Making drinks ......................................................................................................  35

Making coffee with and without milk..................................................................... 35

Preparing milk........................................................................................................ 36

Making a coffee..................................................................................................... 37

Cancelling a drink.................................................................................................. 37

DoubleShot............................................................................................................ 38

Making 2 portions   ............................................................................................ 38

Coffee pot.............................................................................................................. 39

Tea ......................................................................................................................... 39

TeaTimer........................................................................................................... 40

Making tea........................................................................................................ 41

Teapot............................................................................................................... 41

Dispensing warm or hot water .............................................................................. 41

Expert mode .........................................................................................................  42

Grinder setting .....................................................................................................  43

3

Contents

Parameters ...........................................................................................................  44

Displaying and changing parameters .................................................................... 44

Ground quantity..................................................................................................... 44

Brewing temperature ............................................................................................. 44

Pre-brewing the coffee .......................................................................................... 44

Type of beans ........................................................................................................ 45

Portion size ..........................................................................................................  46

Resetting drinks ..................................................................................................  47

Profiles ..................................................................................................................  48

Creating a profile ................................................................................................... 48

Editing profiles....................................................................................................... 48

Setting when the profile should change................................................................ 48

Profiles: creating and editing drinks ..................................................................  49

MyMiele ................................................................................................................  50

MobileStart   .....................................................................................................  51

Settings ................................................................................................................  52

Displaying and changing settings ......................................................................... 52

Language............................................................................................................... 52

Time....................................................................................................................... 52

Date ....................................................................................................................... 52

Start screen ........................................................................................................... 52

Timer ..................................................................................................................... 53

Appliance timer ................................................................................................ 53

Maintenance timer............................................................................................ 53

TeaTimer........................................................................................................... 54

Volume................................................................................................................... 54

Display................................................................................................................... 54

Brightness ........................................................................................................ 54

Colour scheme ................................................................................................. 54

QuickTouch ...................................................................................................... 54

Lighting.................................................................................................................. 54

Info (display information) ....................................................................................... 54

Fresh water ............................................................................................................ 54

Altitude .................................................................................................................. 54

4

Contents

Performance mode................................................................................................ 55

Eco mode ......................................................................................................... 55

Barista mode .................................................................................................... 55

Latte mode ....................................................................................................... 55

Party mode ....................................................................................................... 55

Water hardness ..................................................................................................... 55

Proximity sensor.................................................................................................... 57

System lock   ...................................................................................................... 57

Miele@home .......................................................................................................... 57

Remote control...................................................................................................... 58

SuperVision ........................................................................................................... 58

RemoteUpdate ...................................................................................................... 58

Software version.................................................................................................... 59

Legal information................................................................................................... 59

Showroom programme (Demo mode) ................................................................... 59

Factory defaults..................................................................................................... 59

Cleaning and care ...............................................................................................  60

Overview of cleaning intervals............................................................................... 60

Cleaning by hand or in the dishwasher ................................................................. 61

Unsuitable cleaning agents ................................................................................... 62

Cleaning the drip tray and waste container........................................................... 64

Cleaning the drip tray cover .................................................................................. 66

Water container ..................................................................................................... 66

Cleaning the central spout .................................................................................... 66

Cleaning the cup rim sensor ................................................................................. 68

Cleaning the milk flask with lid .............................................................................. 69

Cleaning the milk valve.......................................................................................... 70

Cleaning the bean containers................................................................................ 70

Brew unit removal and cleaning by hand .............................................................. 71

Cleaning the interior, inside of the machine door and drip tray ............................ 73

Cleaning the front of the machine ......................................................................... 73

Maintenance programmes..................................................................................... 74

Rinsing the machine.............................................................................................. 74

Rinsing the milk pipework ..................................................................................... 75

Maintenance programme: Clean the milk pipework.............................................. 75

Degreasing the brew unit and cleaning the interior............................................... 76

Descaling the machine .......................................................................................... 78

Automatic cleaning and descaling ....................................................................  81

Please note before and during the automatic maintenance programmes: ........... 81

Automatic cleaning................................................................................................ 82

The Miele cleaning cartridge ................................................................................. 82

5

Contents

Replacing the cleaning cartridge........................................................................... 83

Automatic descaling.............................................................................................. 84

The Miele descaling cartridge ............................................................................... 84

Maintenance Timer................................................................................................ 86

Cancelling automatic cleaning and descaling....................................................... 87

Problem solving guide ........................................................................................  88

Messages in the display........................................................................................ 88

Unusual performance of the coffee machine ........................................................ 91

Faults with automatic cleaning and/or descaling .................................................. 94

Unsatisfactory results............................................................................................ 96

Cleaning the milk valve.......................................................................................... 99

After sales service and warranty .....................................................................  102

Accessories .......................................................................................................  103

Installation ..........................................................................................................  104

Mains water connection ...................................................................................... 104

Electrical connection ........................................................................................... 106

Building-in dimensions ....................................................................................... 107

Building in the coffee machine ............................................................................ 109

Door opening limiters .......................................................................................... 110

Conformity declaration .....................................................................................  112

Copyrights and Licences ..................................................................................  113

6

Warning and Safety instructions

This coffee machine complies with all the stipulated safety requirements. Inappropriate use can, however, lead to personal injury and material damage.

Read the operating instructions carefully before using the coffee machine. They contain important information on safety, installation, use and maintenance. This prevents both personal injury and damage to the coffee machine.

In accordance with standard IEC 60335-1, Miele expressly and strongly advises you to read and follow the instructions in the chapter on installing the coffee machine as well as the safety instructions and warnings.

Miele cannot be held liable for injury or damage caused by noncompliance with these instructions.

Keep these operating instructions in a safe place and pass them on to any future owner.

7

Warning and Safety instructions

Correct application

 This coffee machine is intended for home use.

 This coffee machine is not intended for outdoor use.

 This coffee machine must not be used at altitudes above 2000 m.

 It must only be used as a domestic appliance to make espresso, cappuccino, latte macchiato, tea etc. Any other use is not permitted.

 This coffee machine can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised whilst using it, or have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.

8

Warning and Safety instructions

Safety with children

 Danger of burning and scalding on the dispensing spouts.

Children's skin is far more sensitive to high temperatures than that of adults.

Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts.

 Install the coffee machine where it is out of the reach of children.

 Children under 8 years of age must be kept away from the coffee machine unless they are constantly supervised.

 Children aged 8 and older may only use the coffee machine without supervision if they have been shown how to use it in a safe manner.

Children aged 8 and older must be aware of the potential dangers caused by incorrect operation.

 Please supervise children in the vicinity of the coffee machine and do not allow them to play with it.

 Young children must not be allowed to clean the coffee machine at all. Cleaning may only be carried out by children 8 years of age or older under the supervision of an adult.

 Remember that coffee and espresso are not suitable drinks for children.

 Danger of suffocation! Whilst playing, children may become entangled in packaging material (such as plastic wrapping) or pull it over their head with the risk of suffocation. Keep packaging material away from children.

9

Warning and Safety instructions

Technical safety

 Installation work or repairs should only be carried out by a Miele authorised technician. Unauthorised or incorrect installation work or repairs can pose considerable danger to users.

 A damaged coffee machine could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine.

 To avoid the risk of damage to the machine, make sure the connection data (voltage and frequency) on the data plate corresponds to the household supply, before connecting the machine to the mains supply. Consult a qualified electrician if in any doubt.

 The electrical safety of this coffee machine can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met. If in any doubt please have the electrical installation tested by a qualified electrician.

 Reliable and safe operation of the coffee machine can only be guaranteed if it is connected to the mains electrical supply.

 Do not connect the machine to the mains electricity supply by a multi-socket adapter or an extension lead. These are a fire hazard and do not guarantee the required safety of the appliance.

 The coffee machine must not be used in a non-stationary location

(e.g. on a ship).

 For safety reasons, this machine may only be used when it has been built in.

 If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a suitable built-in plate/food warming drawer).

 Only use the coffee machine in rooms where the ambient temperature is between +16 °C and +38 °C.

10

Warning and Safety instructions

 A minimum installation height of 850 mm must be observed.

 This coffee machine must not be installed behind a closed cabinet door because heat and moisture can build up behind it. This can result in damage to the machine and/or furniture unit.

 The coffee machine must be disconnected from the electricity supply during repair work.

 While the machine is under warranty, repairs should only be undertaken by a Miele authorised service technician. Otherwise the warranty is invalidated.

 Miele can only guarantee the safety of the machine when original

Miele spare parts are used. Faulty components must only be replaced by genuine Miele original spare parts.

 Never open the outer casing of the machine. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults or electric shock.

 Only use original Miele accessories. If other parts are used, warranty, performance and/or product liability claims will be invalidated.

11

Warning and Safety instructions

Mains water connection

 Do not connect the coffee machine to a hot water supply.

 The stopcock must be easily accessible after the coffee machine has been built in.

 The protective sleeve of the water inlet hose must not be damaged or become kinked.

 The integrated water protection system offers protection from water damage, provided the following conditions are met:

– The coffee machine is correctly installed, connected to the electricity supply and plumbed in.

– If a fault is identified, the coffee machine must be repaired immediately.

– The stopcock is turned off when the machine is not in use for an extended period (e.g. during holidays).

12

Warning and Safety instructions

Correct use

 Danger of burning and scalding on the dispensing spouts.

The liquids and steam dispensed are very hot.

Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed.

Do not touch hot components.

Hot liquid or steam could spatter from the nozzles. Ensure that the central spout is clean and fitted correctly.

Before opening the door, remove any containers from the drip tray in the machine door.

Water in the drip tray can also be very hot. Take care when emptying it.

 Danger of injury to the eyes.

Never look directly at the lighting or use optical instruments to look at it.

 Please note the following regarding water:

– If the water container is filled manually: only use cold, fresh tap water to fill the water container. Hot or warm water or other liquids can damage the coffee machine.

– Change the water every day to prevent a build-up of bacteria.

If the machine is plumbed into the mains water supply: empty the water container once a day.

– Do not use carbonated water.

 Only put roasted coffee beans in the bean containers. Do not place coffee beans which have been treated with additives or ground coffee inside the bean containers.

 Do not fill the bean containers with any type of liquid.

13

Warning and Safety instructions

 Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins.

 Do not use coffee beans which have been treated with caramel, sugar or other substances including sugary liquids. Sugar will damage the coffee machine.

 If decaffeinated coffee beans are used after dispensing a drink with caffeinated beans, there may still be residues from the caffeinated beans in the grinder or brew chamber. Discard the first coffee drink when using decaffeinated coffee.

 Only use milk without additives. Additives in milk usually contain sugar and this will stick to the milk pipework.

 If using dairy milk make sure that it has been pasteurised.

 When making tea, please follow the instructions on the packaging.

 Do not place flaming alcohol mixtures underneath the central spout. The flames could ignite plastic components and cause them to melt.

 Do not swing from or hang anything on the machine front when it is open as this could damage the hinges on the coffee machine.

 The machine must not be used for cleaning objects.

14

Warning and Safety instructions

Cleaning and care

 Clean the coffee machine and the milk flask daily, particularly before using them for the first time.

 All parts of the milk system need to be cleaned thoroughly and regularly. Milk contains bacteria which proliferate rapidly with inadequate cleaning.

 If you do not make use of the automatic descaling and cleaning functions, you must regularly run the maintenance programmes for cleaning the milk pipework and the brew unit, and for carrying out descaling. Miele cannot be held liable for damage that results from not cleaning and/or descaling the machine properly, or from using the wrong cleaning/descaling agent or an unsuitable solution concentration.

 Do not use a steam cleaner to clean this machine. Steam could reach electrical components and cause a short circuit.

 Used coffee grounds should be disposed of with the organic rubbish or on the compost heap. Do not empty them down the sink, as they could block it.

15

Warning and Safety instructions

For machines with stainless steel surfaces:

 Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on the stainless steel surfaces. These will damage the stainless steel surfaces, causing them to lose their dirtrepellent protective coating.

 The finish on stainless steel surfaces is susceptible to scratching.

Even magnets can cause scratching.

16

Exterior view

1 2 3 4 5 6

Guide to the machine

7

11 a On/Off button   b Optical interface (for the Miele Customer Service Department only) c MobileStart sensor   d Movement sensor e “Back”   sensor f Touch display g “Light” sensor   h Door handle i Height-adjustable central spout with lighting j Drip tray cover k Milk flask

17

8

9

10

Guide to the machine

Interior view

a Bean containers ( Type A and Type C ) b Milk valve c Height-adjustable central spout with lighting d Grinder setting e Bean container ( Type B ) f Fan outlet g Water container h Drip tray with lid i Brew unit j Waste container k Maintenance container l Receptacles for cleaning and descaling cartridges (including adapters) m Drip tray

18

Operation

Touch display

The delicate touch display can be scratched by pointed or sharp objects, e.g.

pens.

Only touch the display with your fingers.

The touch display is split into multiple areas.

Miele

12:00

Ristretto

Espresso

Coffee

Long coffee

  Profiles

The menu path appears on the left of the header . If you touch a menu name in the header, the display will switch to that menu. To switch to the start screen, touch   .

The time of day is shown on the right of the header. Additional symbols may also appear, e.g. TeaTimer    .

The current menu and menu options are shown in the centre . You can scroll to the right or left by swiping your finger across the display to the right or left.

The options that appear in the footer vary according to which menu is selected; e.g. DoubleShot   , Save or  OK .

19

Operation

Operating actions

All the selectable options are displayed in black or white according to your selected colour scheme.

Each time you touch a possible option, the relevant characters (word and/or symbol) light up orange .

Selecting a menu option

 Touch the field or value you want in the display.

Scrolling

You can scroll left or right.

 Swipe the screen by placing your finger on the touch display and moving it in the direction you want.

The bar at the bottom shows you where you are in the current menu.

Exiting a menu

 Touch the   sensor. Alternatively, touch the higher-level menu name within the menu path.

Entries made before this which have not been confirmed with  OK will not be saved.

Tip: Touching the   sensor three times in succession will take you to the drinks menu.

Entering numbers with the roller

 Swipe the roller up or down until the value you want is displayed centrally in orange. Confirm with  OK .

Entering numbers using the numerical keypad

 Touch the centrally displayed orange value and keep your finger on it until the numerical keypad appears.

20

Operation

OK

 Select the value you want: as soon as you enter a valid value, OK turns green.

Use the   arrow to delete the last entered number.

 Confirm with  OK .

Entering a name

Letters are entered using a keyboard. It is best to select short names.

 Touch the letters or characters you want.

Tip: Use the    arrow to delete the last entered character.

 Touch Save .

Displaying the context menu

When you are in certain menus, a context menu can be displayed, e.g. for configuring drinks.

 For instance, you can touch the name of a drink and keep your finger on it until the context menu opens.

 To close the context menu, touch an area of the display located outside of the menu window.

Moving entries

You can change the order of the entries in the drinks menu, in Profiles and in

MyMiele .

 Touch an entry and keep your finger on it until the context menu appears.

 Select Move .

An orange border appears around the entry.

 Touch the selected entry and move it to the required location without taking your finger off the display.

21

Operation

Help

Context-sensitive help is available for certain functions. In this case, Help appears in the bottom line.

 Touch Help to display information in text and pictures.

 Touch Close to return to the previous menu.

Pull-down menu

Among other things, the pull-down menu provides access to a schematic representation of the bean containers and to Expert mode .

 Touch the orange line at the top edge of the screen and drag down with your finger.

Active settings are highlighted in orange.

 To close the pull-down menu, drag it back up to the top or touch an area of the display located outside of the menu window.

22

Operation

Symbols in the display

The display shows symbols as well as text, e.g. symbols for the various drinks.

Some of these are explained below.

Symbol

Explanation

This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information.

This symbol indicates the “Settings” menu and the

“Language” menu option.

This symbol appears if the system lock is activated.

Operation is locked.

The symbol and the desired switching-on time appear in the display 23:59 hours before the coffee machine is due to switch on if the On at timer and setting for displaying the time are activated (see “Settings – Timer”).

This symbol appears during the Clean the milk pipework maintenance programme and during automatic cleaning.

(This symbol is also found on the water container: fill up to this mark with water.)

This symbol appears while the appliance is being descaled.

(This symbol can also be found on the water container: fill up to this mark).

This symbol and a fault code will appear if a fault occurs.

If Miele@home has been activated for the coffee machine, these symbols represent the quality/status of the WiFi connection, indicating the strength in increments from strong to not connected.

The “Remote control” symbol appears if Miele@home has been set up for the coffee machine and the setting Remote control  | On has been selected.

The “SuperVision” symbol appears if Miele@home has been set up for the coffee machine and the setting SuperVision |

SuperVision display | On has been selected.

23

Miele@home

Your coffee machine is equipped with an integrated WiFi module.

In order to use it, you will need:

– A WiFi network

– The Miele@mobile app

– A Miele user account The user account can be created via the

Miele@mobile app.

The Miele@mobile app will guide you through the process of connecting your coffee machine to your home WiFi network.

Once your coffee machine is connected to your WiFi network, you can use the app to carry out activities such as the following:

– Calling up information on the operating status of your coffee machine

– Changing settings on your coffee machine

– Controlling your coffee machine remotely

Connecting your coffee machine to your

WiFi network will increase energy consumption, even when the machine is switched off.

Before installing the coffee machine in its final location, ensure that the signal from your WiFi network is strong enough.

Availability of the WiFi connection

The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures.

Therefore, the availability of featured functions cannot be guaranteed.

Miele@home availability

The ability to use the Miele@mobile app depends on the availability of the

Miele@home service in your country.

The Miele@home service is not available in every country.

For information about availability, please visit www.miele.com.

Miele@mobile App

The Miele@mobile App is available to download free of charge from the Apple

App Store

®

or from the Google Play

Store™.

24

Before using for the first time

Before using for the first time

 Connect the coffee machine to the water and electricity supplies.

 Install the coffee machine by building it in.

 Remove any notices from the machine.

 Remove the protective foil from the drip tray cover.

Clean the machine thoroughly (see

“Cleaning and care”) before filling it with coffee beans and making drinks.

 Clean the coffee machine (see

“Cleaning and care”).

Have the following to hand (included with delivery) when setting the machine up for the first time:

– Miele cleaning cartridge

– Miele descaling cartridge

Switching on for the first time

 Touch the On/Off button   .

Selecting the display language and country

The choice of country determines how the time is displayed, e.g. in the 12 or

24-hour format, as well as how units are displayed and so on.

 Select the desired display language.

 Then select the country.

Setting up the network (Miele@home)

You can connect your coffee machine to your home WiFi network.

When you start it up for the first time, it shows the following in the display: Set up Miele@home?

Tip: You can also choose to set up

Miele@home for your coffee machine at a later point. In this case, select Skip .

 Make sure that your WiFi network signal is sufficiently strong in the place where you want to set up your coffee machine.

 Touch Continue .

 Select the connection method you wish to use.

 Follow the instructions provided in the coffee machine display and in the

Miele@mobile app.

Connection successfully established will appear in the display.

 Touch Continue to proceed with initial set-up.

Setting the date

 Set the current date and touch  OK .

Setting the time

 Set the current time of day and touch  OK .

If the coffee machine has been connected to a WiFi network and signed into the Miele@mobile app, the time will be synchronised based on the country setting in the

Miele@mobile app.

25

Before using for the first time

Setting the water hardness level

Contact your local water supplier to find out your local water hardness range if necessary.

More information can be found under

“Settings – Water hardness”.

 Enter your local water hardness (in

°dH) and confirm with  OK .

Selecting the water supply (Mains water)

The coffee machine is intended to be plumbed into the mains water supply.

You can select one of the following options:

– On : The water container will be filled automatically via the mains water connection.

– Off : You must fill the water container manually. A message appears in the display to inform you of this.

 Select the option you want.

Setting up automatic cleaning and descaling

Information about automatic cleaning and descaling will appear in the display.

 Confirm with  OK .

Tip: Touch Help to display an illustrated guide.

Fitting the cleaning cartridge

You will now be prompted to fit the cleaning cartridge.

 Open the coffee machine door.

 Remove the maintenance container on the left-hand side.

 Pull the cleaning cartridge holder forwards to remove it.

26

Before using for the first time

 Once the cleaning cartridge has been removed from its packaging, unscrew the screw cap. The cap is no longer required.

 Fit the descaling cartridge and push it upwards as far as it will go.

 Slide the descaling cartridge holder back into place.

 Put the maintenance container back inside the coffee machine and close the machine door.

The descaling cartridge will fill with water the next time the machine is switched off.

Always wait for the coffee machine to switch itself off. Do not force it to do so.

 Screw the cleaning cartridge into the holder upside down.

 Push the holder and cartridge into the coffee machine until the holder audibly clicks into place.

Fitting the descaling cartridge

 Take the descaling cartridge out of its packaging.

Once the cleaning and descaling cartridges have been fitted, a message will appear regarding the current start time set for automatic cleaning and descaling.

 If you want to change the start time, touch Timer and select the required time.

 Confirm with  OK .

You can also adjust the start time for automatic cleaning and descaling at a later point.

 Pull the descaling cartridge holder forwards.

Selecting the Performance mode

You can select the appropriate mode to suit your personal preferences (see

“Settings – Performance mode”).

– Eco mode : This is an energy-saving mode.

– Barista mode : This mode has been optimised for unadulterated coffee enjoyment.

27

Before using for the first time

– Latte mode : In this mode, milkbased drinks can be prepared within a much shorter space of time.

 Select the mode you want.

The coffee machine is now successfully set up for use. You can now fill the bean system.

Setting up the bean system

After setting up the coffee machine, you will be prompted to set up the bean system. The coffee machine will assist you when first filling and naming the bean containers.

 Touch  Yes .

If you select No , the assistant for setting up the bean system will not be shown again.

 Fill the bean containers with roasted coffee beans.

 Put the lids back on the bean containers to seal them.

 Push the bean containers all the way back into the coffee machine. Close the machine door.

Tip: Make a note of each type of bean.

After filling the bean containers, you can now name the types of beans.

Naming the types of beans

The 3 bean containers are shown in the display as follows and are pre-named.

Type of beans

Type A

Type C

Type B

Filling the bean containers

The coffee machine has 2 bean container drawers on the top left and right.

 Open the machine door.

 Pull the bean containers out and take off the lids.

If you rename the bean containers, please note the following:

– It is best to select short names.

– If you are using the same type of beans in 2 or 3 bean containers at the same time (for instance because you only use one type of bean), make sure you name them in exactly the same way.

Name type of beans for bean container?

appears in the display and Type A is highlighted in orange.

 Touch  Yes .

The editor will open in the display.

 Enter the name you want for the bean container and then touch Save .

28

Before using for the first time

 Now name the other 2 bean containers.

<Type XY> Allocate will appear in the title bar of the display.

Allocating types of beans

Now you need to allocate the drinks to the types of beans. Selected drinks are highlighted in orange.

 Now select the drinks that are to be prepared with this type of bean.

Confirm your selection with  OK .

Now it is time to allocate the next type of bean. The coffee drinks that have not yet been allocated are displayed.

 Select the drinks that are to be prepared with this type of bean.

Confirm with  OK .

Any remaining drinks which have not been selected will be allocated to the third bean type.

You have set up the bean system and you can now prepare drinks.

Tip: Touch All drinks to select all the drinks. You can then deselect the ones you do not want.

If you do not allocate the bean containers to the drinks, you will be asked what type of bean you want to use for the coffee as you make it.

To ensure that any coffee residues from the factory testing process are removed from the brewing system, please throw away the first 2 cups of coffee when using the coffee machine for the first time.

29

Bean system

Coffee or espresso can be made from whole roasted coffee beans which are freshly ground for each portion.

Your coffee machine has a bean system with 3 bean containers which can be filled with different types of beans or even just one type. You can allocate bean types to individual coffee drinks however you like. Alternatively, you can create your own user profiles that do not have the same bean types allocated to the coffee drinks as the Miele profiles.

 Risk of damage to the grinder due to incorrect operation.

The coffee machine will be damaged if the bean container is filled with unsuitable substances such as liquids, ground coffee or coffee beans treated with sugar, caramel or similar.

In addition, green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans can damage the grinder. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins.

Only put roasted coffee beans in the bean container.

If decaffeinated coffee beans are used after dispensing a drink with caffeinated beans, there may still be residues from the caffeinated beans in the grinder or brew chamber.

Please be aware that minimal residues of caffeinated beans may be present in the next drink that you make.

Changing bean system settings (Type of beans)

The drinks menu is displayed.

 Touch the   sensor.

 Select  Settings and then Type of beans .

The schematic representation of the bean containers is displayed.

Type of beans

Type A

Type C

Type B

 Select a bean type.

You can now change the name of the bean type or how it is allocated.

Tip: If you want to allocate another type of bean to a coffee drink, you can also do this under “Change parameters” (see “Parameters – Type of beans”).

Renaming the type of beans

 Touch Change name .

The editor will open in the display.

If you rename the type of beans, please note the following:

– It is best to select short names.

– If you are using the same type of beans in 2 or 3 bean containers at the same time (for instance because you only use one type of bean), make sure you name them in exactly the same way.

 Enter the name you want and then touch Save .

30

If you switch from having identical names to having different names, you will then need to allocate coffee drinks to the newly named type of bean.

Changing how the bean containers are allocated

If you have created extra user profiles for coffee drinks in addition to the

Miele standard profile, the bean types can be individually allocated to the drinks in each profile.

 Touch Change allocation .

If you have set up 1 or more profiles and at least 1 coffee drink, first select the profile.

 Select the profile for which you want to allocate the types of beans.

All coffee drinks will be listed. The already allocated drinks will be highlighted in orange.

 Change the allocation as required and then confirm with  OK .

Tip: Touch All drinks to select all the drinks. You can then deselect the ones you do not want.

If you do not allocate a type of bean, you will be asked what type of bean you want to use for the coffee as you make it.

Bean system

31

Filling the water container

 Risk to health due to contaminated water.

Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Water that gets left in the inlet hose can also impair the flavour if you do not make any drinks for a long time.

Change the water in the water container every day .

Discard the first full container of water if you have not made any drinks for a while.

If the coffee machine is plumbed into the mains drinking water supply, the water container will fill automatically as soon as the coffee machine is switched on.

You can fill the water container manually at any time.

 Risk of damage due to incorrect operation.

Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine.

Carbonated water leaves too much limescale in the coffee machine.

If filling the water container manually:

Only use fresh, cold tap water.

 Open the machine door.

 Pull the water container forwards to remove it.

 Fill the water container with fresh, cold tap water up to the “max.” mark.

 Push the water container into the machine and close the machine door.

32

Switching on and off

Switching the coffee machine on

 Touch the On/Off button   .

The coffee machine heats up and rinses the pipework. Hot water will run out of the central spout.

You can now make drinks.

If the coffee machine is already at operating temperature, rinsing will not take place.

Switching off for longer periods of time

If the coffee machine is not going to be used for a while, e.g. if you are going on holiday, remember to do the following:

 Empty the drip tray, the waste container and the water container.

 Clean all parts thoroughly, including the brew unit and interior of the machine.

 Switch the coffee machine off.

Switching the coffee machine off

 Touch the On/Off button   .

If coffee has been dispensed, the coffee machine will rinse the coffee pipework automatically before switching off.

While dispensing a drink or during maintenance processes, moisture builds up in the coffee machine. The fan inside the machine expels moisture from the interior. Once a drink has been dispensed or the machine has been switched off, the fan will continue to run for up to 30 minutes or so. You will hear an accompanying noise.

33

Spout adjustment

The central spout cannot be manually adjusted.

Before making the drink, the central spout moves down and the cup sensor stops it at the optimum height for the cups or glasses being used.

When the coffee machine is switched off, the central spout will be in the middle position.

When a maintenance programme is being carried out, the central spout will move to the height of the maintenance container or into a low maintenance position.

Make sure that the central spout is in the top or middle position before you open the door.

34

Making drinks

 Danger of burning and scalding on the dispensing spouts.

The liquids and steam dispensed are very hot and can cause scalding.

Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed.

Do not touch hot components.

Making coffee with and without milk

The following drinks can be made:

– Ristretto is a strong, concentrated espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water.

– Espresso is a strong aromatic coffee with a thick hazelnut brown coloured froth – known as the crema – on top.

We recommend using espressoroasted coffee beans to make an espresso.

– Coffee differs from espresso by the increased amount of water and the roast of the beans.

We recommend using coffee beans of the correct roast to make the coffee.

– Long coffee is a coffee with considerably more water.

– Long black . This is made with hot water and two shots of espresso.

– Caffè Americano consists of espresso and hot water. The espresso is made first, then the hot water is dispensed into the cup.

– Cappuccino  consists of approx.

2 thirds milk froth and 1 third espresso.

– Latte macchiato consists of 1 third each of hot milk, milk froth and espresso.

– Caffè latte consists of espresso and hot milk.

– Cappuccino italiano has the same proportions of milk froth and espresso as a cappuccino. The difference is that the espresso is added first and then the milk froth.

– Espresso macchiato is an espresso with a small amount of milk froth on top.

– Flat white is a special variety of cappuccino that contains significantly more espresso than milk froth for an intensive coffee aroma.

– Café au lait is a French style of coffee consisting of coffee and milk froth. Café au lait is usually served in a bowl.

Hot milk or milk froth can also be made.

35

Making drinks

Preparing milk

Milk or milk alternatives (e.g. soya milk) containing added sugar can clog up the milk pipe and the rest of the milk pipework. Residues from unsuitable liquids can interfere with milk preparation.

The milk used must not contain any additives.

Only use pasteurised cow's milk.

Tip: Using cold cow's milk (< 10 °C) with a protein content of at least 3 % will produce the perfect milk froth.

You can select milk with a fat content according to preference. With whole milk (at least 3.5 % fat), the milk froth will be slightly creamier than with lowfat milk.

The milk flask

Milk is not cooled in the milk flask.

For high-quality milk froth, always use cold milk (< 10 °C).

a Lid b Sensor c Milk suction tube d Glass flask

Filling and inserting the milk flask

 Fill the milk flask with milk up to a maximum of 2 cm below the rim. Seal the milk flask with the lid.

36

Making drinks

Making a coffee

 Push the milk flask back into the coffee machine until it clicks into place.

Tip: It is easier to remove the milk flask with both hands.

 Place a container underneath the central spout.

 Select a coffee drink.

Preparation will begin and the coffee will be dispensed into the container from the central spout.

Cancelling a drink

 Press Stop or Cancel .

37

Making drinks

DoubleShot

Select the DoubleShot   function if you would like a particularly strong and aromatic coffee. In this case, more coffee beans will be ground and brewed halfway through the brewing process.

The shorter extraction time means that fewer unwanted aromas and bitter compounds will be released.

DoubleShot can be activated for all drinks apart from “Ristretto” and “Long black”.

Making a DoubleShot   of coffee

The   symbol will appear while drinks are being made.

 Touch the   symbol immediately before or after you start making a drink.

Dispensing starts and the   symbol is highlighted in orange in the display.

2 portions of coffee beans will be ground and brewed.

Making 2 portions 

You can dispense 2 portions of a drink into 1 large cup or into 2 cups at the same time.

 Touch the   symbol immediately before or after you start making a drink.

Dispensing starts and the   symbol is highlighted in orange in the display.

2 portions of the desired drink will be dispensed.

 Place a cup under each of the coffee dispensers in the central spout.

38

Making drinks

Coffee pot

You can make several cups of coffee one after the other automatically with the Coffee pot function (maximum of 1 litre).

The drinks menu is displayed.

Tip: Make sure that the bean and water containers have enough beans and water inside them before starting the

Coffee pot function.

 Place a sufficiently large container under the central spout.

 Select Coffee pot .

Tip: You will find Coffee pot at the end of the drinks menu.

 Select the number of cups you want

(3 to 8).

 Follow the instructions in the display.

Each portion of coffee will be brewed and dispensed individually. You can follow the process in the display.

You can interrupt preparation at any time.

 Touch Cancel .

Tea

The coffee machine is not intended for commercial or scientific purposes.

Temperatures given are approximate and can vary according to ambient conditions.

To make tea, you can select from the following options:

– Japanese tea is a high-quality green tea which boasts a fine, fresh,

“green” taste.

Dispensed temperature: approx. 65 °C, brewing time: approx. 1.5 minutes

– White tea is a green tea where only the young buds of the tea plant are used and processed very gently.

White tea has a particularly mild taste.

Dispensed temperature: approx. 70 °C, brewing time: approx. 2 minutes

– Green tea gets its green colour from the leaves of the tea plant. The tea leaves are either roasted or steamed depending on the region. Green tea can be infused multiple times.

Dispensed temperature: approx. 80 °C, brewing time: approx. 2.5 minutes

– Black tea gets its dark colour and characteristic taste from the fermentation of tea leaves. Black tea can be enjoyed with a little lemon or milk.

Dispensed temperature: approx. 97 °C, brewing time: approx. 3 minutes

39

Making drinks

– Chai latte has its origins in traditional

Ayurveda medicine as a black tea with typically Indian spices and milk.

The milk mellows the spices and tops off the flavour experience.

Dispensed temperature: approx. 97 °C, brewing time: approx. 3 minutes

– Herbal tea is an aromatic infusion drink made up of dried leaves or fresh parts of plants.

Dispensed temperature: approx. 97 °C, brewing time: approx. 8 minutes

– Fruit tea is made from dried pieces of fruit and/or parts of plants, e.g.

rose hip. The taste of the drink varies according to which plants are used and how they are blended. Lots of fruit teas are also flavoured.

Dispensed temperature: approx. 97 °C, brewing time: approx. 8 minutes

The type of tea determines the preset temperature.

The respective dispensing temperatures are the ones that Miele recommends for making the types of tea concerned.

You can adjust the dispensing temperatures used for the individual teas by customising the brewing temperature (see “Parameters –

Brewing temperature”). A temperature increment of approximately 2 °C makes a noticeable difference.

Whether you use loose tea leaves, blended tea or tea bags depends on your own personal preference.

Follow the instructions for making tea on the tea packaging.

The amount of tea required varies from one type of tea to another. Always follow the recommendations of the manufacturer on the packaging or of the retailer. You can adjust the amount of water according to the type of tea and the size of the cup (see “Portion size”).

TeaTimer

You can use the TeaTimer function to start a minute minder when making tea.

There is a preset brewing time for the type of tea selected. You can adjust the preset brewing time (up to a maximum of 14:59 minutes).

There are 2 TeaTimer functions available and they can be started independently of one another. The

TeaTimer is shown together with the associated brewing time in the top right of the display.

While the brewing time is counting down, you can continue to use the coffee machine as normal. After the brewing time has elapsed, a buzzer will sound and the   symbol will flash.

Setting the TeaTimer

You can choose between the following options:

– Automatic : The TeaTimer starts automatically once the water has been dispensed.

– Manual : Once the water has been dispensed, you have the option of starting the TeaTimer .

40

Making drinks

The drinks menu is displayed.

 Touch the   sensor.

 Select Settings | Timer | TeaTimer .

 Select the setting you want.

Making tea

The drinks menu is displayed.

 Pour loose tea into a tea filter or similar, or take a tea bag from the packet.

 Place the tea filter or the tea bag in the tea cup.

 Place the tea cup under the central spout.

 Select the type of tea from the display.

Hot water will be dispensed into the cup.

If TeaTimer | Automatic has been selected, the minute minder for the brewing time will start running once the water has been dispensed.

Starting the TeaTimer manually

 Touch TeaTimer .

The editor will open with a suggested time.

 Change the brewing time if necessary and confirm with  OK .

After the brewing time has elapsed, a buzzer will sound and the   symbol will flash.

 Now remove the tea leaves or the tea bag.

Teapot

The Teapot function allows you to make a large quantity of tea (maximum of 1 litre). The type of tea selected determines the preset temperature.

The drinks menu is displayed.

Tip: Make sure that the water container has enough water inside it before you start making a pot of tea.

 Place a sufficiently large container under the central spout.

 Select the teapot option you want.

 Select the number of cups you want

(3 to 8).

You can interrupt preparation at any time.

 Touch Cancel .

Dispensing warm or hot water

You can choose between the following options:

– Hot water at approx. 90 °C

– Warm water at approx. 65 °C

The drinks menu is displayed.

 Place a suitable container underneath the central spout.

 Choose between warm or hot water.

Dispensing will start.

41

Expert mode

In Expert mode, you can allocate a bean type temporarily and change the portion size while the drink is being made. The setting will not be saved and will only apply for the current drink.

Activating and deactivating

Expert mode

Expert mode is located in the pull-down menu at the top edge of the screen.

 Touch the top edge of the screen in the middle and drag down with your finger to open Expert mode .

The schematic representation of the bean containers is displayed.

 Touch Expert mode .

Expert mode is active when Expert mode is highlighted in orange.

 To exit the pull-down menu, drag the menu window back up to the top or touch an area of the screen outside of the pull-down menu.

Expert mode: allocating bean containers temporarily

 Touch the top edge of the screen and open the Expert mode pull-down menu.

 Now select the bean container containing the beans you want to use for the current drink.

 To close the menu window, drag it back up to the top.

 If necessary, switch to the drinks menu.

 Now start making the drink.

Expert mode: changing the portion size

The drinks menu is displayed.

If you select DoubleShot   or

2 portions   , Expert mode cannot be used to change the portion size.

 Select a drink.

Dispensing will start. You can adjust the portion size while it is being dispensed, e.g. individually change the amount of hot milk, milk froth and espresso for a latte macchiato.

Dispensing

 Touch the bar and adjust the indicator

(small triangle) as required.

42

Grinder setting

When the beans are ground correctly, the coffee or espresso will flow evenly into the cup with a good crema.

The crema should have an even hazelnut brown colour.

The grinder setting you select will be used for all coffee drinks.

There are various ways to tell whether the coffee grinder is set correctly.

The coffee has been too coarsely ground if:

– Espresso or coffee flows into the cup too quickly,

– the crema is very pale and uneven,

Set a finer grinder setting.

The coffee has been too finely ground if:

– espresso or coffee flows into the cup very slowly,

– the crema is dark brown,

Set a coarser grinder setting.

Only adjust the grinder one setting at a time.

Start making a new drink, to grind beans again. Adjust the grinder setting one setting at a time again.

 Remove the water container.

 Push the slide control a maximum of one setting forwards (for finer grinding) or one setting backwards

(for coarser grinding).

 Replace the water container.

 Close the machine door.

 Make one cup of coffee.

Adjust the grinder setting again, if required.

Adjusting the fineness of grind

The slide control for adjusting the fineness is located on the top left behind the water container.

The grinder setting is set for all bean types.

 Open the machine door.

43

Parameters

Displaying and changing parameters

You can individually adjust the following parameters for each drink:

– Type of beans

– Amount of coffee

– Brew temperature

– Pre-brewing

You can adjust the brewing temperature for making tea and dispensing warm and hot water.

The drinks menu is displayed.

 Touch the name of the drink you want and keep your finger on it until the associated context menu appears.

 Select Parameters .

The Parameters menu is displayed.

 Select the parameter you want.

The current setting is displayed.

 Change the setting as required.

Increase the amount of coffee so that more ground coffee is brewed.

The amount of coffee is too high , if

– espresso or coffee flows into the cup very slowly,

– the crema is dark brown,

– the espresso or coffee tastes bitter.

Decrease the amount of coffee so that less ground coffee is brewed.

Brewing temperature

The ideal brewing temperature will depend on

– the type of coffee being used,

– whether an espresso or a coffee is being made, and

– the air pressure in the region.

Tip: Not all types of coffee tolerate high temperatures. Several types are sensitive to high temperatures, resulting in an impaired crema and taste.

You can also adjust the brewing temperature for making tea and dispensing warm and hot water.

Ground quantity

The coffee machine can grind and brew

7.5–12.5 g of coffee beans per cup. The greater the quantity, the stronger the coffee.

There are various ways to tell whether the amount of coffee is set correctly:

The amount of coffee is too low if

– espresso or coffee flows into the cup too quickly,

– the crema is very pale and uneven,

– the espresso or coffee lacks body.

Pre-brewing the coffee

When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water.

Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavour of the coffee.

44

You can set pre-brewing for a short or long length of time, or deselect “ Prebrewing ” altogether.

The machine is supplied with the “Prebrewing” function switched off.

Type of beans

You can display which type of bean is currently being used for this coffee drink or change which bean container is allocated to it.

Parameters

45

Portion size

The flavour of the coffee produced depends not only on the type of coffee, but also on the amount of water used.

You can programme the amount of water for all coffee drinks, tea and hot water to suit the size of your cups and the type of coffee you are using. This does not alter the amount of coffee used.

For coffee drinks with milk, you can also set the amount of milk or milk froth to suit your personal taste. You can also set the portion sizes for hot milk and milk froth.

The changed portion size is always saved in the current profile. The name of the current profile is shown in the top left of the display.

If the maximum amount is reached, preparation stops and the maximum possible amount is saved.

If you want to change the portion size for coffee drinks made with milk or hot water, the ingredients which make up the drink will be saved one after the other while the drink is being made.

The programmed mix of ingredients and portion size will now be dispensed every time that particular drink is selected.

If the water container becomes empty whilst making a drink, the coffee machine will stop programming the portion size. The portion size will not be saved.

The drinks menu is displayed.

 Place the desired cup under the central spout.

 Touch the drink you want and keep your finger on it until the context menu opens.

 Touch Portion size .

The drink will now be made. Save will appear in the display as soon as the minimum dispensing amount is reached.

 When the cup is filled to the level you want, touch Save .

46

You can reset portion sizes and parameters to their factory default settings for individual drinks or for all drinks.

The drinks menu is displayed.

 Touch the drink you want and keep your finger on it until the context menu opens.

 Select Reset and confirm with Yes .

The portion size and parameters are reset to their factory default settings.

The allocated bean type remains stored.

Resetting drinks

47

Profiles

In addition to the Miele drinks menu

(Miele profile), you can create individual profiles to cater for different tastes and preferences.

Within the profile, you can adjust the portion sizes and parameters individually for all drinks.

The name of the current profile is shown in the top left of the display.

Creating a profile

The drinks menu is displayed.

 Touch Profiles .

The Profiles menu opens.

 Touch Create profile .

The editor will open in the display.

 Enter the name you want and then touch  Save .

The profile has been created. You can now create drinks (see “Profiles: creating and editing drinks”).

Editing profiles

Once you have created a profile, you can rename, delete or move profiles via the context menu.

 To do this, touch the profile name and keep your finger on it until the context menu appears.

 Edit the entry as required.

Setting when the profile should change

You can choose between the following options:

– Manual : The selected profile will remain active until you select another one.

– After each use : The machine will revert to the Miele profile whenever a drink is dispensed.

 Select the option you want.

48

Profiles: creating and editing drinks

You can save frequently made drinks in a profile with your own individual settings (see “Profiles”).

You can also change the names of your drinks and delete any unwanted drinks from your profile. You can save a maximum of 9 drinks in a profile.

Creating a drink

You can create new drinks based on existing drinks.

The drinks menu is displayed.

 Start by accessing the profile you want as follows: touch Profiles and select the profile.

The name of the profile is shown in the top left of the display.

 Touch Create drink .

 Now select a drink.

 Change the portion size or drink parameters for this drink.

Preparation will begin and you can save the portions of each component as desired.

 Enter a name for the new drink and touch Save .

The newly created drink will appear in the profile.

Renaming, moving or deleting an entry

Once you have created some drinks, you can edit these entries in the context menu.

The desired profile with the newly created drinks will appear in the display.

 Touch the name of the drink and keep your finger on it until the context menu appears.

 Edit the entry as required.

49

MyMiele

You can display drinks you make frequently, drinks from profiles and maintenance programmes in the

MyMiele screen.

Tip: You can also set menu options that you have entered in MyMiele as your start screen (see “Settings – Start screen”).

The main menu is displayed.

 Touch MyMiele .

You can now configure MyMiele.

MyMiele: adding an entry

 Touch Add entry .

You can now add entries from the following menus:

– Drinks

– Profiles

– Maintenance

 Select an entry.

 Confirm the message with  OK .

A box containing the selected option will appear. This also shows which menu it comes from.

MyMiele: deleting or moving an entry

Once you have created some entries, you can move or delete them via the context menu in the MyMiele screen.

 To do this, touch the entry you want and keep your finger on it until the context menu appears.

 Move or delete the entry as required.

50

MobileStart  

With MobileStart   you can, for example, start making a drink via the

Miele@mobile app.

You will only be able to use

MobileStart if Miele@home has been set up for your coffee machine.

 Danger of burning and scalding on the dispensing spouts.

If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the central spout or touch hot components.

Ensure that no one, especially children, can be harmed if the machine is operated without supervision.

Automatic cleaning and descaling will not start if MobileStart   is activated.

The pipework is not pre-warmed when the machine is switched on either so that the cup under the central spout is not filled with rinse water.

Milk is not cooled in the milk flask. If you want to start making a drink with milk using the app, make sure that the milk is sufficiently cold (< 10 °C).

If the coffee machine is being operated manually, it cannot be operated via the app. Operation on the machine takes precedence.

To start making drinks remotely,

MobileStart   must be activated and the coffee machine must be ready to use. This means:

– The water container is sufficiently filled.

– The bean container contains enough beans.

– The drip tray and waste container are empty.

– If milk was used before the machine was last switched off, the milk pipework must have been rinsed before switching it off.

– If milk is being prepared, the milk flask must be attached. Pay attention to the temperature of the milk.

– A sufficiently large, empty cup has been placed under the central spout.

MobileStart will be deactivated after

24 hours.

If you are making a drink with

MobileStart   , you will be notified of drink dispensing with acoustic and optical signals. These signals cannot be changed or switched off.

Switching MobileStart 

on and off

If you want to use MobileStart   , the

Remote control option must be switched on.

The drinks menu is displayed.

 Touch the   sensor.

The   sensor lights up. You can now starting making a drink via the app.

Follow the prompts for doing this.

51

Settings

You can personalise your coffee machine by adapting the factory default settings to suit your requirements.

Displaying and changing settings

The drinks menu is displayed.

 Touch the   sensor.

 Select Settings .

 Select the option you want to change.

 Change the setting.

If necessary, confirm your choice with  OK .

Some settings which can be found in the Settings menu are described in their separate sections in the operating instructions.

Language

You can select the language (and country variant of that language) for all display text.

Tip: If you select the wrong language by mistake, you can find the

“Language” option again via the

  symbol.

Time

Display (Clock display)

Select how you want the time of day to show in the display when the coffee machine is switched off:

– On : The time is always visible in the display.

– Off : The time is not visible in the display.

– Night dimming : To save energy, the time is only displayed between 5 am and 11 pm.

Clock type

The time of day can be displayed in analogue (clock face) or digital (hours: minutes plus date) format when the coffee machine is switched off.

Clock format

– 24-hour display ( 24 h )

– 12-hour display ( 12 h (am/pm) )

Setting

Set the hours and the minutes.

Tip: There is a shortcut for setting the time without having to access the

Settings menu: simply touch the time of day on the top right of the display.

If the coffee machine has been connected to a WiFi network and signed into the Miele@mobile app, the time will be synchronised based on the country setting in the

Miele@mobile app.

Date

Set the date.

The date will only appear if the following setting is selected: Time |

Clock type | Digital .

Start screen

You can choose which screen appears when the coffee machine is switched on. For instance, you can use MyMiele

52

Settings to display a personalised menu (see

“MyMiele”).

The new start screen will appear when the coffee machine is next switched on.

The drinks menu is set as the start screen by default.

Timer

Appliance timer

You can set different times for the timer at the weekend ( Sat. and Sun.

) and/or from Monday to Friday ( Monday-Friday ).

Alternatively, you can select Daily to use the same timer settings every day.

Tip: If you are unable to set the timers because the screen is greyed out, touch

On to enable timer adjustment.

To save and activate the timer functions, select Accept all .

To deactivate the timer functions, select

Switch all off .

Delete allows you to deactivate timers individually. In this case, the following will appear in the display: -- -.

Switch on at (On at)

The coffee machine switches on at a particular time, e.g. in the morning for breakfast.

The coffee machine will not switch on at the required time if you have activated the system lock.

The timer settings are deactivated.

Once the coffee machine has come on automatically three times at the set time without any drinks being dispensed, it will stop switching on automatically. This prevents the coffee machine from switching itself on unnecessarily, for example, whilst you are away on holiday.

The programmed times will, however, remain in the memory and will be reactivated when the machine is next switched back on manually.

If you have set the time to be displayed while the machine is switched off

( Display | On or Night dimming ) and the time is being displayed in digital format

( Clock type | Digital ), the  symbol and the desired switching-on time will appear in the display 23:59 hours beforehand.

Switch off at (Off at)

The coffee machine switches off at a particular time.

Switch off after (Switch off after)

The coffee machine switches off after a particular length of time if no sensors have been pressed.

By default, the coffee machine switches off after 20 minutes.

You can change this to another time of between 20 minutes and 9 hours.

If you deactivate the timer functions by selecting Switch all off , the coffee machine will switch off after the last set time.

Maintenance timer

In the Maintenance Timer, you can select any start time you like for the automatic maintenance programmes.

Please note that the automatic maintenance programmes can take up to 2.5 hours to run once the activation

53

Settings and rinsing phases have been factored in. For this reason, it is best to set an evening time or a regular time during the day when you are always out.

You can set different start times for the weekend ( Sat. and Sun.

) and/or for

Monday to Friday ( Monday-Friday ).

TeaTimer

You can use the TeaTimer to start a minute minder when making tea (see

“Making drinks – TeaTimer”).

Volume

You can set the volume of the buzzer and keypad tones using the bar chart.

Display

Brightness

The display brightness is adjusted via a bar with seven segments.

Colour scheme

Choose between a light or dark colour scheme for the display.

QuickTouch

Use this setting to define whether the   sensor and movement sensor should respond when the coffee machine is off and the time is being shown in the display ( Time  | Display  | On or Night dimming ).

Lighting

Use the segment bar to set the lighting intensity.

You can use the   sensor to switch the lighting on or off at any time, provided that the coffee machine is switched on.

If the coffee machine is switched off, you can still switch the lighting on or off whenever you like but you will need to select the following settings first:

– Time  | Display  | On or Night dimming

(time of day is displayed)

– Display | QuickTouch | On

Info (display information)

In the Info menu option, you can display the number of drinks dispensed and the fill levels of the cartridges (provided that they have been fitted).

Fresh water

The machine is intended to be plumbed into the mains water supply. Fresh water is automatically taken into the water container when the mains water connection is on. If it is switched off, you must fill the water container manually.

Altitude

If the coffee machine is installed at high altitudes, the lower air pressure will cause the water to boil at a lower temperature. You can set the local altitude of the machine to ensure that the correct temperatures are achieved.

54

Settings

Performance mode

You can select the appropriate performance mode for how you use your machine. Eco mode is set by default.

Eco mode

Eco mode is an energy-saving mode.

The system does not heat up until someone starts making a drink.

Barista mode

This performance mode has been optimised for unadulterated coffee enjoyment. Users can enjoy coffeebased drinks without any delay as the coffee machine remains heated to the brewing temperature. This mode consumes more energy than Eco mode.

Latte mode

This performance mode has been optimised for preparing milk. Milkbased drinks can be prepared within a much shorter space of time. This mode consumes more energy than Eco mode and Barista mode.

Party mode

This performance mode has been configured for the occasional intensive use of the coffee machine, e.g. for family get-togethers.

Before switching off the coffee machine, empty the drip tray and fill the water container so that any pending maintenance programmes are able to run.

Clean the coffee machine thoroughly after intensive use, particularly the milk pipework. It may be necessary to descale the coffee machine manually and degrease the brew unit.

Please note the following information about Party mode:

– The general pipework is rinsed much less frequently or not at all. The milk pipework is not rinsed until around 1 hour after milk was last dispensed.

– Cleaning status messages or cleaning prompts are suppressed and delayed until the machine is next switched on.

– The Off at and Switch off after timers are deactivated. The coffee machine switches off 6 hours after the last sensor was pressed.

– The cup light remains permanently switched on at the maximum brightness level for as long as the coffee machine stays switched on.

Water hardness

Programme the coffee machine to the water hardness level of your area so that it functions correctly and does not get damaged.

Contact your local water supplier to find out your local water hardness range if necessary.

55

Settings

If you are using bottled drinking water, e.g. mineral water, select settings according to the calcium content. The calcium content is given on the label of the bottle in mg/l Ca

2+

or ppm

(mg Ca

2+

/l).

Do not use carbonated water.

The hardness level is set to 21 °dH by default.

Water hardness Calcium content

°dH mmol/l mg/l Ca

2+

or ppm (mg Ca

2+

/l)

17

18

19

20

12

13

14

15

16

10

11

7

8

9

1

2

3

4

5

6

3.1

3.2

3.4

3.6

2.2

2.3

2.5

2.7

2.9

1.3

1.4

1.6

1.9

2.0

0.2

0.4

0.5

0.7

0.9

1.1

121

129

136

143

86

93

100

107

114

50

57

64

71

79

7

14

21

29

36

43

Setting

17

18

19

20

12

13

14

15

16

10

11

7

8

9

1

2

3

4

5

6

Water hardness Calcium content

°dH mmol/l mg/l Ca

2+

or ppm (mg Ca

2+

/l)

24

25

26

27

28

21

22

23

29

30

31

32

33

34

35

36

6.1

6.3

6.5

37-45 6.6-8.0

46-60 8.2-10.7

61-70 10.9-12.

5

5.2

5.4

5.6

5.8

5.9

4.3

4.5

4.7

4.9

5.0

3.8

4.0

4.1

207

214

221

229

236

243

250

257

258–321

322–429

430-500

150

157

164

171

179

186

193

200

Setting

34

35

36

37-45

46-60

61-70

29

30

31

32

33

24

25

26

27

28

21

22

23

Tip: If your water hardness is >21 °dH

(3.7 mmol/l), we recommend using bottled drinking water instead

(< 150 mg/l Ca

2+

). This will mean your coffee machine will need to be descaled less often and there will be less impact on the environment because less descaling agent will be used.

56

Settings

Proximity sensor

The movement sensor detects when you approach the touch display with your hand or body. You can activate the following functions individually:

– Switch light on : You can decide whether the light should come on when the coffee machine is on or off.

– Acknowledge buzzer : Buzzer sounds are suppressed, e.g. in the event of the message Fill and replace the water container .

– Switch the appliance on : The start screen is displayed.

The movement sensor is deactivated by default.

If you want the movement sensor to respond even when the coffee machine is switched off, activate

QuickTouch as well ( Display  |

QuickTouch  | On ).

When the system lock is activated, the movement sensor functions are deactivated.

System lock 

You can lock the coffee machine to prevent it being used without your knowledge, by children, for example.

When the system lock is activated, the settings for the On at timer and the movement sensor are deactivated.

The coffee machine will not switch on at the set time and/or will not respond to movement when someone approaches it.

Temporarily deactivating the system lock  

 Touch the display for 6 seconds.

The system lock is reactivated when the coffee machine is next switched off.

Miele@home

The following options may appear under Miele@home:

– Set up : This option only appears if the coffee machine has never been connected to a WiFi network or if the network configuration has been reset.

– Deactivate */ Activate *: The settings for the WiFi network are retained, but the network is switched on or off.

– Connection status *: Information about the WiFi connection is displayed. The symbols indicate the strength of the connection.

– Set up again *: The settings for the current WiFi network will be reset.

The WiFi connection will be set up from scratch.

* This menu option appears if

Miele@home has been set up and the coffee machine has – where applicable

– been connected to a WiFi network.

57

Settings

Remote control

The remote control option appears when the coffee machine is connected to a WiFi network.

When remote control is switched on, you can – for example – change the coffee machine settings in the

Miele@mobile app. To start making a drink via the app, MobileStart must be activated as well.

The remote control function is switched on by default.

SuperVision

The SuperVision option appears when the coffee machine is connected to a

WiFi network.

SuperVision allows you to monitor other household appliances in the

Miele@home system.

SuperVision display

When SuperVision is on ( SuperVision |

On ), the   symbol appears in the display.

Display in Standby mode

SuperVision is also available in Standby mode if the time display function is switched on ( Settings | Time | Display | On or Night dimming ).

Appliance list

All household appliances signed in to the Miele@home system are listed.

You can switch SuperVision on or off for the signed-in household appliances. If you switch off SuperVision for a particular household appliance, any faults that occur in relation to this appliance will still be displayed.

You can also switch the buzzer on or off for the listed household appliances.

RemoteUpdate

The RemoteUpdate menu option is only displayed and can only be selected if the requirements for using

Miele@home have been met.

The RemoteUpdate function allows the software on your coffee machine to be updated. If an update is available for your coffee machine, it will automatically download it. Updates will not be installed automatically. They must be initiated manually.

If you do not install an update, you can continue to use your coffee machine in the usual way. However, Miele recommends installing updates.

Activating/deactivating

The RemoteUpdate function is activated by default. Available updates will be downloaded automatically but will only be installed if you initiate installation manually.

Deactivate RemoteUpdate if you do not want any updates to be downloaded automatically.

Running a RemoteUpdate

Information about the content and scope of an update will be provided in the Miele@mobile app.

58

Settings

A message will appear in your coffee machine display if a software update is available.

You can install the update immediately or postpone this until later. When the coffee machine is switched on again, you will be reminded about the update.

Deactivate RemoteUpdate if you do not want to install the update.

The update may take several minutes.

Please note the following information about the RemoteUpdate function:

– You will only receive a message when an update is available.

– Once an update has been installed, it cannot be undone.

– Do not switch the coffee machine off during the update. Otherwise, the update will be aborted and will not be installed.

– Some software updates can only be carried out by the Miele Customer

Service Department.

Software version

The “Software version” menu option is intended for the Miele Customer

Service Department. You do not need this information for domestic use.

Legal information

This menu option contains details of the open source licences used.

Showroom programme (Demo mode)

Do not activate this setting for domestic use.

The  Showroom programme | Demo mode function enables the coffee machine to be demonstrated in shops or showrooms. In this mode, the machine lights up but no drinks can be prepared and no maintenance programmes can be run.

Factory defaults

You can reset the coffee machine to its factory default settings.

MyMiele can be reset separately.

The following will not be reset:

– The number of drinks dispensed and the machine status (No. of portions until machine needs descaling, ... brew unit needs degreasing)

– Language

– Time and date

– Profiles and their associated drinks

(the allocation of bean types to drinks is reset)

– Miele@home

The Maintenance timer is reset to 2:00 h.

59

Cleaning and care

 Risk to health due to inadequate cleaning

Heat and moisture inside the coffee machine can cause coffee residues to become mouldy and/or milk residues to go off and pose a risk to health.

Carefully clean the coffee machine regularly.

Overview of cleaning intervals

Recommended frequency

Daily

(at the end of the day)

Once a week

(more often if heavily soiled)

Once a month

As and when required/after prompt appears in display

What do I have to clean/maintain?

Milk flask and lid

Milk valve

Water container

Drip tray cover

Drip tray and waste container

Central spout

Cup rim sensor

Interior

Brew unit

Drip tray

Front of machine

Bean containers

Milk pipework (using the cleaning agent for milk pipework)

Degrease the brew unit (using cleaning tablets)

Descale the machine

60

Cleaning by hand or in the dishwasher

The brew unit is not dishwasher safe.

Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent.

The following components must be cleaned by hand only :

– Central spout stainless steel cover

– Brew unit

– Bean containers and lids

Cleaning and care

 Risk of damage as a result of excessively high dishwasher temperatures.

Components may be ruined (e.g.

may become warped) if washed in a dishwasher at temperatures higher than 55 °C.

For dishwasher-safe components, always select dishwasher programmes with a maximum temperature of 55 °C.

Contact with natural dyes such as those found in carrots, tomatoes and ketchup may discolour the plastic parts in the dishwasher. This discolouration does not affect the stability of the parts.

The following components are dishwasher safe :

– Drip tray, lid and waste container

– Drip tray cover

– Central spout (without stainless steel cover)

– Milk flask and lid

– Cup sensor

– Drip tray

– Maintenance container

– Water container

61

Cleaning and care

 Danger of burning and scalding on hot components or by hot liquids.

Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding.

Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed.

Always allow the coffee machine to cool down before cleaning it.

Please be aware that water in the drip tray can also be very hot.

 Risk of damage due to moisture ingress.

The steam from a steam cleaning appliance could reach live electrical components and cause a short circuit.

Do not use a steam cleaner to clean the coffee machine.

It is important to clean the machine regularly, as the used coffee grounds will soon go mouldy. Milk residues can go off and can block the milk pipework.

Unsuitable cleaning agents

Contact with unsuitable cleaning agents can alter or discolour the external surfaces. All surfaces are susceptible to scratching. Scratches on glass can in some circumstances lead to breakage.

Remove all cleaning agent residues immediately. To protect the machine and surrounding surfaces from damage, make sure you remove any spillages or splashes of descaling agent immediately.

To avoid damaging the surfaces, do not use:

– Cleaning agents containing soda, ammonia, acids or chlorides

– Solvent-based cleaning agents

– Cleaning agents containing descaling agents (unsuitable for cleaning the front of the machine)

– Stainless steel cleaning agents

– Dishwasher cleaners (unsuitable for cleaning the front of the machine)

– Glass cleaning agents

– Cleaning agents for ceramic hobs

– Oven cleaners

– Abrasive cleaning agents, e.g.

powder cleaners and cream cleaners

– Hard, abrasive brushes or sponges, e.g. pot scourers, brushes or sponges which have been previously used with abrasive cleaning agents

62

– Melamine eraser blocks

– Sharp metal scrapers

– Steel wool or stainless steel wire scourers

Cleaning and care

63

Cleaning and care

Cleaning the drip tray and waste container

 Danger of burning and scalding on hot components or by hot liquids.

Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding.

If the pipework has just been rinsed, wait a while before removing the drip tray.

Please be aware that water in the drip tray can also be very hot.

Do not touch hot components.

Clean the drip tray and waste container every day to avoid unpleasant smells and mildew.

A prompt will appear in the display when the drip tray and/or the waste container is full and needs to be emptied. Empty the drip tray and the waste container. It is not necessary to take the lid off the drip tray in order to empty it.

Tip: If the drip tray is heavily soiled, clean it with a brush before placing it in the dishwasher.

 Open the machine door.

 Remove the drip tray and waste container from the machine.

 Empty the waste container after removing it from the drip tray.

The waste container may contain a small amount of water from rinsing as well as the leftover coffee grounds.

Taking the drip tray apart

The orange clips are not removable.

 Take the lid off the drip tray as follows: press the orange clips outwards on both sides to release the lid. Remove the lid.

64

 Clean the drip tray, lid and waste container in the dishwasher or wash them by hand using warm water and a little washing-up liquid.

 Dry all parts thoroughly.

 Clean the inside of the coffee machine underneath where the drip tray goes.

Cleaning contacts

Cleaning and care

Reassembling the drip tray

 Attach the drip tray lid as follows: slide the lid under the lug next to the contacts and apply pressure to the lid until the catches at the sides audibly click into place.

 Clean the contacts (metal discs) and the space between them carefully, e.g. using a brush. Dry all parts thoroughly.

The contacts will not be able to detect that the drip tray is full if they are damp or dirty.

Check the contacts and the area around them once a week.

 Place the waste container on the lid.

 Push the drip tray and waste container back into the coffee machine. Close the machine door.

65

Cleaning and care

Cleaning the drip tray cover

 Remove the drip tray cover as follows: apply pressure to the rear edge so that the cover tips forwards and you can remove it easily.

 The drip tray cover can be cleaned in the dishwasher, or by hand using warm water and a little washing-up liquid.

 Dry the drip tray cover.

 Refit the drip tray cover.

Water container

Clean the water container by hand every day with warm water and a little washing-up liquid. You can clean the water container in the dishwasher once a week.

 Open the machine door.

 Remove the water container.

 Clean and rinse the water container with clean water to remove any detergent residues. Dry the outside of the water container.

 Clean and dry the surface that the water container sits on.

 Push the water container all the way into the coffee machine until you feel a resistance. Close the machine door.

Cleaning the central spout

Clean the central spout's stainless steel cover by hand only, using warm water and a little washing-up liquid.

With the exception of the stainless steel cover, all parts of the central spout should be cleaned in the dishwasher at least once a week . This will remove coffee deposits and milk residues effectively.

 Open the machine door.

66

Cleaning and care

 Pull the central spout's stainless steel cover forwards to remove it. Then clean it.

Do not remove the milk pipe connecting piece. If necessary, clean the connecting piece with the cleaning brush.

 Detach the milk pipe from the dispensing unit as follows: pull the tab   to the left.

 Grip the dispensing unit by the sides and pull it down to remove it.

67

Cleaning and care

 Fit the dispensing unit back together.

Press down firmly so that the spouts become securely connected to the holder.

 Take the dispensing unit apart, separating it into 3 components: the

Y-piece, the spouts and the holder.

 Clean all parts thoroughly.

 Clean the area around the central spout with a damp cloth.

Reassembling the central spout

The dispensing unit is easier to reassemble if the individual parts are dampened with water beforehand.

Make sure that all parts are tightly connected to one another.

 Insert the dispensing unit into the coffee machine and connect the milk pipe.

 Refit the stainless steel cover.

 Close the machine door.

Fit cover to central spout will appear in the display.

 Confirm the message with  OK .

Cleaning the cup rim sensor

The cup rim sensor is located under the central spout.

Clean the cup rim sensor at least once a week and more often if heavily soiled.

68

Cleaning and care

 Press the two retainers together (see arrows).

The cup rim sensor is released.

 The cup rim sensor can be cleaned in the dishwasher, or by hand using warm water and a little washing-up liquid.

 To refit the cup rim sensor, press it into the holder on the central spout from below.

Cleaning the milk flask with lid

The milk flask should be taken apart and cleaned every day after use.

Both the lid and the glass flask can be cleaned in the dishwasher, or by hand using warm water and a little washingup liquid.

 Remove and empty the milk flask.

 Rinse the milk pipework in the lid under running water and then place the lid in the dishwasher.

 If no water runs out of the connecting piece   , clean it with the cleaning brush.

 Clean the glass flask.

 Dry all the parts and reassemble the milk flask.

 Clean the milk flask holder on the coffee machine with a damp cloth.

69

Cleaning and care

Cleaning the milk valve

The milk valve seal can be damaged by objects with sharp edges or similar.

Do not use any sharp-edged objects

(such as knives) to clean the milk valve.

The milk valve is located under the bean container on the left-hand side.

If allowed to dry, milk residues can become encrusted on the stainless steel bolt. These crusty deposits are difficult remove. Therefore, it is important to carry out regular cleaning after preparing milk.

 Open the machine door.

 Clean the milk valve with a damp cloth/microfibre cloth.

 Close the machine door.

Cleaning the bean containers

 Risk of damage from incorrect use and cleaning.

Immersing the bean containers in liquids can result in malfunctions. If they are taken apart, bits may break off or the mechanism may no longer work properly once they are reassembled.

Do not disassemble the bean containers.

Do not immerse the bean containers in liquids, e.g. soapy water.

Coffee beans contain oils which can deposit themselves on the walls of the bean containers and hinder the flow of the beans. Therefore, clean the bean containers regularly with a soft cloth.

If required, you can clean the lids of the bean containers by hand with warm water and a little washing-up liquid. Dry the lids thoroughly before refitting them on the bean containers.

 Open the machine door.

 Pull the left and right-hand bean containers out of the coffee machine.

 Clean the bean container wells inside the machine.

Tip: Use a vacuum cleaner to remove any coffee residues from the interior.

 Remove the lids and empty the bean containers.

70

Cleaning and care

Brew unit removal and cleaning by hand

The moving parts of the brew unit are lubricated. Cleaning agents and washing-up liquid will damage the brew unit.

Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent.

Do not remove the components for improving the flow of the beans (see arrow).

 Clean the bean containers and lids by hand using a slightly damp cloth. Dry all parts carefully before filling the bean containers with roasted coffee beans.

 Replace the lids and push the containers back into place in the coffee machine.

 Close the machine door.

Remove and clean the brew unit once a week . Also clean the area below the brew unit once a week.

 Open the machine door.

 Remove the water container.

 Press the button under the handle of the brew unit   and, whilst doing so, turn the handle forwards   .

71

Cleaning and care

 First, pull the brew unit sideways   and then tip it forwards   and slide it out that way   .

If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see

“Problem solving guide”).

When you have removed the brew unit, do not change the position of the handle on the brew unit.

Otherwise, the brew unit cannot be inserted.

 Clean the brew unit by hand under warm running water without using cleaning agent or washing-up liquid.

 Wipe any remaining coffee residue from the filters. One filter is located in the funnel. The other filter can be found to the left of the funnel.

 Dry the funnel to prevent ground coffee sticking to it the next time a coffee is made.

 Clean the inside of the coffee machine. Use your vacuum cleaner to remove dry ground coffee residues.

Replacing the brew unit

 Proceed in reverse order: tip the brew unit forwards at a slight angle and push it back into the coffee machine.

 Press the button under the handle of the brew unit   and, whilst doing so, turn the handle backwards   .

72

Cleaning and care

Tip: If you are unable to turn the brew unit handle, apply firm pressure to the sides of the brew unit.

 Push the water container into the coffee machine.

The process of removing and inserting the brew unit causes ground coffee to drop into the drip tray.

 Remove the drip tray and clean the lid.

 Push the drip tray back into the coffee machine and close the machine door.

Cleaning the interior, inside of the machine door and drip tray

Clean the interior and front of the machine as part of the normal cleaning process. For instance, if you remove the water container, use this as an opportunity to clean the area under the water container at the same time.

The drip tray is located at the bottom on the inside of the machine door.

Remove and empty the drip tray on a regular basis. The drip tray is dishwasher safe.

 Open the machine door.

 Remove and clean the drip tray.

 Remove the following parts from the interior:

– Water container

– Drip tray

– Maintenance container

– Brew unit

– Bean containers

Tip: Use your vacuum cleaner to remove dry ground coffee residues.

 Clean the interior and the inside of the machine door by hand with a clean and slightly damp cloth/ microfibre cloth. After cleaning, wipe the interior and machine door dry using a soft cloth.

 Put all the parts back in place, including the drip tray.

 Close the machine door.

Cleaning the front of the machine

If soiling is not removed promptly, it could cause the surface to alter or discolour.

Remove any soiling on the front of the machine straight away.

Make sure that water cannot get behind the display.

Clean the front of the machine after manual descaling. If possible, wipe up any spillages of descaling agent immediately.

73

Cleaning and care

Tip: Before cleaning the control panel, open the machine door to prevent accidental operation.

 Clean the front of the machine with a clean and slightly damp cloth/ microfibre cloth. After cleaning, wipe the surfaces dry using a soft cloth.

Tip: You can also use a Miele microfibre cloth to clean the front.

Maintenance programmes

The coffee machine has maintenance programmes for:

– Rinsing the machine

– Rinsing the milk pipework

– Cleaning the milk pipework*

– Degreasing the brew unit*

– Descaling the machine*

* If you have not fitted any cleaning and/or descaling cartridges and have switched off automatic cleaning, you will need to run the maintenance programmes manually yourself.

Please also note that the coffee machine pipework may also have to be descaled manually at regular intervals even if a descaling cartridge has been fitted, depending on how you use your machine and the hardness of the water used.

Opening the Maintenance menu

The drinks menu is displayed.

 Touch the   sensor.

 Select Maintenance .

You can now start the desired maintenance programme.

Rinsing the machine

If you have made a coffee drink, the coffee machine will rinse the coffee pipework automatically before switching off. You can also start the

Rinse the appliance function manually.

74

Cleaning and care

Rinsing the milk pipework

If you have made a drink with milk, the coffee machine will rinse the milk pipework automatically after a few minutes. You can also start the Rinse the milk pipework function manually.

Maintenance programme:

Clean the milk pipework

You can run the maintenance programme with the Miele cleaning cartridge or with the cleaning agent for milk pipework (small sticks of powdered cleaning agent). The maintenance programme lasts for approx. 20 minutes.

If you have switched on automatic cleaning and fitted a ready-to-use cleaning cartridge, the Clean the milk pipework maintenance programme will run using the cleaning cartridge.

Cleaning the milk pipework with the cleaning cartridge

In addition to using the automatic cleaning function, you can also start the maintenance programme manually, e.g.

to clean the milk pipework after a period of intensive use.

The Maintenance menu is displayed.

 Touch Clean the milk pipework .

 Follow the instructions in the display.

Cleaning the milk pipework with the cleaning agent for milk pipework

(sticks)

If automatic cleaning is switched off, the milk pipework must be cleaned at least once a week.

For optimal cleaning results, we recommend Miele cleaning agent for milk pipework.

The cleaning agent for milk pipework has been specially developed for use with Miele coffee machines and prevents subsequent damage.

For each cleaning process, you will need 2 sticks of the cleaning agent for milk pipework.

It is available to order via the Miele webshop or directly from Miele (see the end of this booklet for contact details).

Clean the milk pipework appears in the display.

The cleaning process cannot be cancelled. It must be completed through to the end.

 Confirm the message with  OK .

 Follow the instructions in the display.

When Fill water container with lukewarm water and cleaning agent up to the  symbol and replace it. Close the door appears in the display, proceed as follows.

Preparing the cleaning solution

 Open 2  sticks of the cleaning agent for milk pipework and empty the contents into the water container.

75

Cleaning and care

 Fill the water container to the

  mark with lukewarm water and stir the solution.

Follow the instructions for the mixing ratio carefully. It is important that you do not fill the water container with too little water. Otherwise, cleaning will be incomplete.

 Replace the water container in the coffee machine and close the machine door.

 Follow the instructions in the display.

 If prompted to do so in the display, rinse the water container thoroughly with clean water. Make sure that no cleaning agent is left in the water container. Fill the water container with fresh tap water.

The cleaning process is finished when

Process finished appears in the display.

Degreasing the brew unit and cleaning the interior

Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine.

You can run the maintenance programme with the Miele cleaning cartridge or with cleaning tablets for degreasing the brew unit. The maintenance programme lasts for approx. 20 minutes.

If you have switched on automatic cleaning and fitted a ready-to-use cleaning cartridge, the Degrease the brew unit maintenance programme will run using the cleaning cartridge.

If you have not fitted a Miele cleaning cartridge, the following message will appear in the display after 200 portions:

Degrease the brew unit .

 Confirm the message with  OK .

This message will keep being displayed until the brew unit has been degreased.

Degreasing the brew unit

The Maintenance menu is displayed.

The maintenance programme cannot be cancelled. It must be completed through to the end.

 Touch Degrease the brew unit .

The maintenance programme will then start.

 Follow the instructions in the display.

Remove the water container and the brew unit. Rinse the brew unit by hand and clean the interior of the machine will appear in the display.

76

Cleaning and care

Cleaning the brew unit and interior

The moving parts of the brew unit are lubricated. Cleaning agents and washing-up liquid will damage the brew unit.

Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent.

To ensure good tasting coffee and to prevent the formation of microbes in the machine, remove and clean the brew unit under running water once a week.

 Open the machine door.

 Remove the water container.

 First, pull the brew unit sideways   and then tip it forwards   and slide it out that way   .

If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see

“Problem solving guide”).

When you have removed the brew unit, do not change the position of the handle on the brew unit.

Otherwise, the brew unit cannot be inserted.

 Clean the brew unit by hand under warm running water without using cleaning agent or washing-up liquid.

 Press the button under the handle of the brew unit   and, whilst doing so, turn the handle forwards   .

77

Cleaning and care

 Push the brew unit containing the cleaning tablet back into the coffee machine.

 Wipe any remaining coffee residue from the filters. One filter is located in the funnel and the other to the left of the funnel.

The process of removing the brew unit causes ground coffee to drop into the drip tray.

 Remove the drip tray and clean the lid.

 Clean the inside of the coffee machine. Use your vacuum cleaner to remove dry ground coffee residues.

Dropping a cleaning tablet into the brew unit

 Press the button under the handle of the brew unit   and, whilst doing so, turn the handle backwards   .

 Push the water container and drip tray (plus waste container) back into the coffee machine.

 Close the machine door.

 Follow the further instructions given in the display.

The cleaning process is complete when the drinks menu appears.

 Drop a cleaning tablet into the top of the brew unit (arrow).

Descaling the machine

Risk of damage from spilt descaling solution.

Sensitive surfaces and/or natural floors can suffer damage.

Wipe up any spillages of descaling agent immediately.

Limescale builds up in the coffee machine through use. How often the machine needs to be descaled will

78

Cleaning and care depend on the water hardness level in your area. Limescale must be removed regularly.

The machine will guide you through the descaling process. Various messages will appear in the display, e.g. you will be prompted to empty the drip tray or fill the water container.

Descaling must be carried out . The process takes approx. 20 minutes.

Even if you activate automatic descaling, the pipework may still have to be descaled manually with the

Descale the appliance maintenance programme at regular intervals, depending on how you use your machine.

If you have not fitted a descaling cartridge, the display will remind you when you need to descale the coffee machine.

No. of uses until appliance needs descaling:

 50 will appear in the display. As of this point, the display will indicate how many more drinks can be made before descaling becomes absolutely essential. This number is indicated whenever a drink is made.

 Confirm the message with  OK .

When the number of remaining portions reaches 0, the coffee machine will lock out.

You can switch the coffee machine off if you do not want to run the descaling programme at this point in time. You can not make any drinks until the machine has been descaled.

Descaling after prompt appears in the display

Descale the appliance appears in the display.

Descaling cannot be cancelled once it has started. It must be completed through to the end.

 Confirm the message with  OK .

The process will start.

 Follow the instructions in the display.

When Fill water container with lukewarm water and descaling agent up to the  symbol and replace it appears in the display, proceed as follows.

Make up the descaling solution

We recommend using Miele descaling tablets for optimum results.

These have been specially developed for use with Miele coffee machines and prevent subsequent damage.

Other descaling agents, which contain other acids besides citric acid and/or other undesirable substances, such as chlorides for example, could damage the coffee machine. Moreover, the descaling effect required could not be guaranteed if the descaling solution was not of the appropriate concentration.

Miele descaling tablets are available to order via the Miele webshop, from Miele

(see back cover for contact details) or from your Miele dealer.

You will need 2  descaling tablets.

79

Cleaning and care

 Fill the water container to the   mark with lukewarm water.

 Drop 2  descaling tablets in the water.

Follow the instructions for the mixing ratio carefully. It is important that you do not fill the water container with too much or too little water.

Otherwise, the descaling process will be cancelled prematurely.

Carrying out descaling

 Push the water container back into the machine.

 Follow the further instructions given in the display.

When Rinse and refill the water container appears in the display:

 Remove the water container and rinse it thoroughly with clean water.

Ensure that no descaling solution residue remains in the water container. Fill the water container to the   mark with fresh tap water.

The descaling process is complete when the drinks menu appears.

80

Automatic cleaning and descaling

Risk of damage from spilt cleaning and descaling solution.

Sensitive surfaces and/or natural floors can suffer damage.

One way to catch the cleaning and descaling solution is to place the maintenance container under the central spout before switching off the machine.

Clear up any spillages of cleaning and descaling solution.

When handling a descaling cartridge which has already been filled with water, ensure that the descaling solution does not come into contact with sensitive surfaces.

The coffee machine features automatic maintenance programmes for cleaning the milk pipework and brew unit, and for descaling the machine. For this, the

Miele cleaning and descaling cartridges must be fitted in the coffee machine. If both types of maintenance programme are due to run on the same day, automatic cleaning will always be performed before automatic descaling

(total time: approx. 2.5 hours).

You can set the time for starting cleaning and descaling via the

Maintenance Timer.

The coffee machine will automatically determine the days when to carry out automatic descaling based on the usage pattern.

During automatic cleaning, the milk pipework gets cleaned and/or the brew unit gets degreased. The coffee machine also determines the cleaning solution concentration and the cleaning programme type for automatic cleaning based on the number and types of drinks made.

If you do not make any drinks, the automatic maintenance programmes will not be started.

In order to run the automatic cleaning programmes, a solution is prepared by mixing water with the cleaning agent.

This solution is then pumped through the coffee machine pipework. After the defined activation phase, all the solution is rinsed out of the pipework and the machine can then be used as normal for making drinks.

During automatic cleaning and descaling, you will hear various noises

(e.g. rinsing noises) at frequent intervals even though the machine is switched off.

Please note before and during the automatic maintenance programmes:

The coffee machine must be ready to use and the following conditions must be met:

– Ready-to-use cleaning and descaling cartridges are fitted.

– Automatic cleaning is switched on.

– The coffee machine must not be disconnected from the electricity supply during the automatic maintenance programmes.

– The drip tray, brew unit and central spout are inserted.

81

Automatic cleaning and descaling

– If filling the water container manually: the water container is inserted and is filled with water at least up to the

  mark.

– Carry out the instructions which appear in the display before switchoff, e.g. Empty and refit the drip tray and the waste container .

– The machine door is closed when the programme is started.

– The coffee machine is switched off.

Automatic cleaning

If you have made a drink containing milk within the last 24 hours, the milk pipework will be cleaned. The brew unit will be cleaned after making approx. 25 coffee drinks.

Automatic cleaning lasts for approx. 25 minutes if both the milk system and the brewing system have to be cleaned.

Switching automatic cleaning on and off

It is usual to switch on automatic cleaning as part of the process of setting up the coffee machine.

However, Automatic cleaning can be switched on or off at any time.

The drinks menu is displayed.

 Touch the   sensor.

 Select Settings and then Automatic cleaning .

 Select the setting you want and confirm with  OK .

If coffee drinks and/or milk have already been dispensed when automatic cleaning is switched on, you will need to clean the coffee machine manually as a one-off operation. This will remove any milk residues and coffee oils, and will reset the counter.

The Miele cleaning cartridge

Only use the Miele cleaning cartridge for automatic cleaning. It has been developed specifically for use in this coffee machine.

Please note that the Miele cleaning cartridge has a lifespan of approx. 1 year after it has been placed in the machine.

Critical for the one-year lifespan is the date on which the cleaning cartridge was fitted.

Do not fill the cleaning cartridge with other fluids or substances.

The Miele cleaning cartridge contains a cleaning agent for the effective removal of milk residues and coffee oils.

The Miele cleaning cartridge will last for up to 3 months of automatic cleaning, depending on how often the coffee machine is used. Frequent manual cleaning or a large number of drinks will shorten this period accordingly.

You can display the cartridge fill level as a segment bar under Settings  | Info  | Fill levels . As the cartridge fill level decreases, various messages will appear at regular intervals to remind you to have a new cartridge at the ready.

82

Automatic cleaning and descaling

The first message will appear when the cartridge is approx. 25 % full.

Cleaning cartridges are available to order via the Miele webshop or directly from Miele (see back cover for contact details).

If no cleaning cartridge has been fitted or if the fitted cartridge is empty or has expired , the milk pipework and brew unit must be cleaned manually. For this, you will need the appropriate cleaning agents

(see “Cleaning and care” – “Cleaning the milk pipework” and “Degreasing the brew unit”).

You can leave the cleaning cartridge in place during long periods of non-use or when transporting the coffee machine.

Replacing the cleaning cartridge

You will need a new Miele cleaning cartridge. Cleaning cartridges are available to order via the Miele webshop or directly from Miele (see back cover for contact details).

 Open the machine door and remove the maintenance container.

 Pull the receptacle holding the cartridge forwards and remove them both.

 Unscrew the cleaning cartridge from the holder. Dispose of the spent cartridge with your household waste.

Cleaning agent residues can sometimes dry on the holder, leaving white deposits behind. These residues will not affect the automatic cleaning programme. If necessary, you can wipe the deposits off with a damp cloth or put the holder in the dishwasher.

 Take the new cartridge out of its packaging and unscrew the screw cap. The cap is no longer required.

83

Automatic cleaning and descaling

Automatic descaling

Automatic descaling takes approx. 2 hours, including the activation phase.

To ensure the longevity of components and a consistent environment free of limescale, the coffee machine needs to be manually descaled from time to time. The intervals are determined by your usage behaviour and the water hardness level of your area. If you make a lot of coffees with milk, for example, you will need to descale the coffee machine more frequently with the descaling tablets.

 Screw the new cartridge into the holder upside down.

 Push the holder and cartridge into the coffee machine until the holder audibly clicks into place.

 Put the maintenance container back inside the coffee machine and close the machine door.

The Miele descaling cartridge

Only use the Miele descaling cartridge for the automatic descaling programme.

Please note that the Miele descaling cartridge has a lifespan of approx. 1 year after it has been placed in the machine and filled with water for the first time. Critical for the one-year lifespan is the date on which the descaling cartridge was fitted and filled with water.

Do not fit a descaling cartridge which has already been used in another

Miele coffee machine. Your coffee machine will have no information about the fill level of this cartridge.

The descaling effect may be insufficient and damage your coffee machine.

Do not fill the descaling cartridge with other fluids or substances.

84

Automatic cleaning and descaling

The descaling agent comes in the form of tablets in the descaling cartridge.

The cartridge is filled with water when it is placed in the machine. The tablets gradually dissolve over time.

The Miele descaling cartridge will last for up to 12 months of automatic descaling, depending on how often the coffee machine is used.

You can display the cartridge fill level as a segment bar under Settings  | Info  | Fill levels . As the cartridge fill level decreases, various messages will appear at regular intervals to remind you to have a new cartridge at the ready.

The descaling cartridge is available to order from the Miele online shop or directly from Miele (see back cover for contact details).

If a descaling cartridge is not fitted, an empty cartridge is fitted or an expired cartridge is fitted, the machine needs to be descaled using the Descale the appliance maintenance programme. To do this, the appropriate descaling agent is required (see “Cleaning and care –

Descaling the machine”).

The descaling cartridge can remain fitted even if the machine is not used for a long time. Remove the cartridge before transporting the coffee machine.

Please note:

– Once filled with water, the descaling cartridge has a max. shelf life of

3 weeks outside of the machine.

– It should be transported with care and upright. Avoid shaking it.

Shaking or turning upside down reduces the shelf life or damages the cartridge.

– The cartridge should be stored upright, in a dark place and at room temperature (16 - 38 °C).

Replacing the descaling cartridge

Removing the descaling cartridge

 Open the machine door and remove the maintenance container.

 Pull the cartridge holder forwards.

 Remove the cartridge.

85

Automatic cleaning and descaling

If you do not want to fit a descaling cartridge, seal the system with the adapter.

Tip: You can seal the descaling cartridge with the cap that can be found on the cartridge. This cap can be easily detached by snapping it off.

 Dispose of the cartridge with your household waste.

Fitting the descaling cartridge

 Insert the cartridge and push it upwards as far as it will go.

 Push the cartridge holder back and then put the maintenance container in place.

 Close the machine door.

 Follow the instructions in the display.

The next time the coffee machine is switched off, the new descaling cartridge will also fill with water when the machine is rinsed. You will hear water being pumped into the cartridge at frequent intervals.

Always wait for the coffee machine to switch itself off. Do not force it to do so.

 Insert the adapter in place of the cartridge.

Maintenance Timer

In the Maintenance Timer, you can select any start time you like for the automatic maintenance programmes.

Please note that the automatic maintenance programmes can take approx. 2.5 hours to run. For this reason, it is best to set an evening time or a regular time during the day when you are always out.

You can set different start times for the weekend and/or for Monday to Friday.

Setting the Maintenance Timer

The drinks menu is displayed.

 Touch the   sensor.

 Select Settings and then Timer .

 Select Maintenance timer .

 Change the settings as required and confirm with  OK .

86

Automatic cleaning and descaling

The start time is saved. From now on, the automatic maintenance programmes will commence at the desired time each day.

Cancelling automatic cleaning and descaling

You can cancel the automatic cleaning programmes during the activation phase.

You can cancel automatic cleaning twice to continue making drinks. If automatic cleaning is cancelled three times in a row, the brew unit will have to be degreased and/or the milk pipework cleaned when the coffee machine is next switched on.

Automatic descaling can be cancelled as often as you like. In this case, you may need to descale the coffee machine using the descaling tablets

(see “Cleaning and care – Descaling the machine”).

 Touch the On/Off button   .

The time left in hours is shown in the display.

Cancelling automatic maintenance

 Touch Cancel .

The cleaning or descaling solution is rinsed out of the pipework. Rinsing can take up to 5 minutes. You can now make drinks.

87

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed.

The following guide may help you to find the reason for a malfunction or a fault, and to correct it.

Messages in the display

Error messages must be confirmed with  OK , otherwise the message can reappear in the display even though the problem has been remedied.

Follow the instructions which appear in the display to remedy the problem.

If after this, the fault message appears in the display again, contact Miele Service.

Problem

F1, F2,

F80, F82

F353, F354

F74, F77

F225, F226

F235, F353, F354

Cause and remedy

There is an internal fault.

 Switch the coffee machine off. Wait for approximately 1 hour before switching the machine back on again.

There is an internal fault.

 Switch the coffee machine off. Wait for approximately 2 minutes before switching the machine back on again.

88

Problem

F73 or

Check the brew unit

Problem solving guide

Cause and remedy

The brew unit cannot be positioned correctly or is soiled. It is not possible to press the ground coffee.

 Check whether you can remove the brew unit.

 If you can remove the brew unit, rinse it under running water.

A manual maintenance programme is prematurely aborted and the following appears in the display:

Push the water container in until it engages .

 Push the coffee ejector of the brew unit into the correct position (see illustration).

 Place the water container in the coffee machine and close the machine door. Do not insert the brew unit. Switch the coffee machine on.

This will initialise the brew unit motor and put it back into the start position.

 When Insert the brew unit appears in the display, put the brew unit back in the coffee machine.

 If you cannot remove the brew unit, switch the coffee machine off. Wait for approximately 2 minutes before switching the machine back on again.

The water container has not been filled and inserted correctly.

 Check that you have selected the correct mark.

The symbols marked on the water container indicate the amount of water required for the

Descale the appliance :   and Clean the milk pipework :   maintenance programmes.

 Fill the water container up to the relevant mark and restart the process.

89

Problem solving guide

Problem

Check water intake and empty the water container

F233

F 355, F 357–F 362

F 307

Cause and remedy

The mains water supply is not working.

 Check whether the inlet hose is kinked or the stopcock is not turned on completely.

 Remove and empty the water container.

 Insert the empty water container into the coffee machine.

The following message is displayed: Please wait. Water container filling.

. The water container fills up.

To turn off the mains water connection, fill and insert the water container. You can then select Settings :

Mains water  | Off .

The cup rim sensor is not inserted or is incorrectly inserted.

If the central spout is moving upwards and the cup rim sensor is bumped, e.g. with a cup, the cup rim sensor loses its reference position.

 Confirm the message with  OK .

 Refit the cup rim sensor.

Cup rim detection remains inactive and the central spout stays in the top position until the coffee machine is next switched on. Cup rim detection is reinitialised during the next switch-on operation.

The bean system must be set up again, e.g. coffee beans have possibly got jammed.

 Open the machine door and remove both bean containers from the coffee machine.

 Close the machine door.

The bean system is set up.

 Follow the instructions in the display.

The milk valve is faulty.

 Remove and clean the milk valve (see “Cleaning the milk valve” in the “Problem solving guide” chapter).

90

Problem solving guide

Unusual performance of the coffee machine

Problem

The display remains dark when the coffee machine is turned on using the  On/

Off button   .

The lighting remains off after the coffee machine has been switched on.

Cause and remedy

The On/Off button   was not held for long enough.

 Touch and hold the On/Off button   for at least

3 seconds.

The plug is not inserted in the socket correctly.

 Insert the plug into the socket.

The fuse has tripped because the coffee machine, voltage or another appliance is defective.

 Switch off at the wall socket and remove the plug.

 Contact a qualified electrician or the Miele

Customer Service Department.

The lighting has been switched off.

 Switch the lighting on (see “Settings - Lighting”).

The lighting is faulty.

 Call Service.

The time of day is being displayed but the    sensor and movement sensor are failing to respond.

The coffee machine does not respond to operation via the display.

The coffee machine turns off suddenly.

This is not a fault. The QuickTouch function is switched off. Select Display  | QuickTouch  | On so that the    sensor and movement sensor respond even when the coffee machine is switched off.

There is a fault.

 Touch and hold the On/Off button   until the display switches off and the machine restarts.

The sensors do not respond to touch.

The coffee machine can no longer be operated.

The switch-off time programmed using the timer has been reached.

 If required, you can select a new switch-off time

(see “Settings – Timer”).

The plug is not inserted in the socket correctly.

 Insert the plug into the socket.

There is an internal fault.

 Disconnect the coffee machine from the power supply.

91

Problem solving guide

Problem

A fan can be heard even though no drinks are being prepared or the coffee machine is switched off.

The brew unit cannot be removed.

Cause and remedy

This is not a fault.

Once a drink has been dispensed or the machine has been switched off, the internal fan will continue to run for up to 30 minutes or so.

The brew unit is not positioned correctly.

 If necessary, move the handle on the brew unit back to the start position. Close the machine door.

 Switch the coffee machine off.

 Wait approx. 1 minute before switching the coffee machine back on.

This will initialise the brew unit motor and put it back into the start position.

 If necessary, repeat these steps.

Drink dispensing is prematurely aborted even though there is a container under the central spout.

This is not a fault.

If the container has a very wide opening that prevents the cup rim sensor from making contact with the edge of the container (e.g. in the case of a very large cup), the drink will be cancelled. Use a different container or position the existing one so that the sensor can detect the rim.

The coffee machine does not switch itself on even though the On at timer setting has been activated.

Steam is dispensed instead of water while preparing hot water or making tea.

The system lock has been activated.

 Deactivate the system lock.

The current day of the week has not been selected.

 Check the timer settings and change these if necessary.

The coffee machine was not used after being switched on automatically three times in succession

(holiday mode).

 Switch the machine on and dispense a drink.

The coffee machine does not switch on with the On at timer while automatic descaling is being carried out. This is not a fault. Select a different timer setting.

It is likely that the wrong altitude has been set.

 Change the altitude settings ( Settings      Altitude ).

 If necessary, you can also change the temperature settings for the drinks ( Drink parameters ).

92

Problem solving guide

Problem

The display is hard to see or not able to be read.

Cause and remedy

The display brightness has been set too low.

 Change this setting (see “Settings”).

The display lights up but the coffee machine does not heat up and no drinks are made.

The Demo mode for demonstrating the coffee machine in the showroom has been activated.

 Deactivate the demo mode (see “Settings – Demo mode”)

93

Problem solving guide

Faults with automatic cleaning and/or descaling

Problem

After switching on, a message appears informing you that automatic cleaning and/ or descaling could not be carried out.

Cause and remedy

All removable parts, such as the water container, drip tray, brew unit or central spout, must be fitted.

The water container must be filled with water at least up to the descaling symbol   .

The machine door was not closed.

 Confirm the message with  OK .

 Make sure that the coffee machine is ready to use before the next automatic cleaning and/or descaling process.

The coffee machine was not switched off at the start time.

The automatic maintenance programmes will only start if the coffee machine is switched off.

Descale the appliance appears even though a ready-to-use descaling cartridge has been fitted. Drinks cannot be made.

 Confirm the message with  OK .

 Change the start time if neccesary.

Depending on the water hardness level in your area and your usage behaviour, the coffee machine needs to be descaled using the maintenance programme occasionally.

For this you will need to use Miele descaling tablets.

 Descale the coffee machine using the maintenance programme (see “Cleaning and care

– Descaling the machine”).

94

Problem solving guide

Problem

When the machine is switched on, one of these messages appears: Automatic cleaning could not be carried out. Start Automatic cleaning (duration min.) now? Otherwise Automatic cleaning will be permanently switched off or:

Automatic maintenance could not be carried out.

Carry out the Automatic cleaning part of the

Automatic maintenance programme (duration min.) now? Otherwise the

Automatic cleaning part of the Automatic maintenance programme will be permanently switched off

No drinks can be made.

Cause and remedy

Automatic cleaning could not be carried out twice.

If you want the coffee machine to continue cleaning the milk pipework and degreasing the brew unit automatically:

 Make sure that the coffee machine is ready for automatic maintenance (see “Automatic cleaning and descaling”).

 Touch  OK to start automatic cleaning.

If you select No to switch automatic cleaning off, you will have to clean the milk pipework and degrease the brew unit manually (see “Cleaning and care”). For this, you will need the cleaning agent for milk pipework and the tablets for degreasing the brew unit.

95

Problem solving guide

Unsatisfactory results

Problem

The coffee is not hot enough.

The coffee grinder makes a louder noise than usual.

The coffee flows too quickly into the cup.

The coffee trickles too slowly into the cup.

The crema on the coffee or espresso is not as it should be.

Cause and remedy

The cup has not been pre-heated.

The smaller the cup and the thicker its sides, the more important it is to pre-heat it.

 Pre-heat the cup, for example, with hot water.

The brewing temperature has been set too low.

 Set a higher brewing temperature.

The filters in the brew unit are blocked.

 Remove the brew unit and clean by hand

 Degrease the brew unit.

The coffee bean container has become empty during the grinding process.

 Fill the coffee bean container with fresh beans.

There may be foreign objects such as plastic or stones in amongst the coffee beans.

 Switch the coffee machine off immediately. Call

Service.

The coffee is too coarsely ground.

 Set the grinder to a finer setting (see “Grinder setting”).

The coffee is too finely ground.

 Set the grinder to a coarser setting (see “Grinder setting”).

The grinder setting is not correct.

 Set the grinder to a finer or coarser setting.

The brew temperature is too high for the type of coffee being used.

 Set a lower brewing temperature.

The coffee beans are no longer fresh.

 Add fresh beans to the coffee bean container.

96

Problem solving guide

Problem

The coffee tastes weak.

The coffee grounds in the waste container are sludgy and grainy.

Coffee is not being dispensed from both spouts evenly. Milk may be sputtering when being heated up.

The consistency of the milk froth is unsatisfactory.

Cause and remedy

Less coffee is being brewed because insufficient coffee beans are getting into the grinder.

Have you used a dark roast?

This type of coffee bean is often more oily. These oils can cling to the inside of the bean containers and hinder the flow of beans.

Are you using a type of coffee with very large beans or different sized beans?

The beans are possibly getting wedged or jammed and forming “bean bridges”.

 Clean the bean containers more often if you are using darker, more oily coffee beans.

 If you are using a type of coffee with very large beans or different sized beans, pull the bean containers out slightly and give them a shake.

 If necessary, try using a different type of coffee.

Coffee deposits in the central spout are obstructing dispensing.

 Take the central spout apart and wash all the components – with the exception of the stainless steel cover – in the dishwasher.

This cleaning operation should be performed once a week .

The milk temperature is too high. Good milk froth can only be achieved with cold milk (below 10 °C).

 Check the temperature of the milk in the milk flask.

The milk pipework is blocked and/or the milk valve is soiled.

 Follow the instructions in “Cleaning the milk valve”.

97

Problem solving guide

Problem

Coffee drinks trickle/ dribble slowly out of the central spout.

Cause and remedy

The brew unit is blocked because the coffee machine has been used very intensively. And/or the brew unit has not been regularly removed and cleaned by hand.

 If a cleaning cartridge is fitted, start by switching off Automatic cleaning ( Settings | Automatic cleaning ).

 Run the Degrease the brew unit maintenance programme with 1 cleaning tablet (see “Cleaning and care – Degreasing the brew unit and cleaning the interior”).

 It is particularly important to clean the filters in the brew unit thoroughly.

 If necessary, switch on Automatic cleaning before you start making a drink.

Otherwise, the Clean the milk pipework and Degrease the brew unit maintenance programmes will have to be run again.

98

Problem solving guide

Cleaning the milk valve

If the following issues occur during milk preparation, the milk valve may be blocked: only hot milk is dispensed instead of milk froth, the milk sputters or sprays out. Start by checking the points listed below:

– Is the milk in the milk flask cold

(< 10 °C)?

– Have the central spout and the milk flask lid been cleaned thoroughly?

– Is the central spout correctly fitted?

– Are the milk pipework and dispensing unit securely connected?

If you are still unhappy with the results of milk preparation, follow the steps described for cleaning the milk valve.

The milk valve cover should only be cleaned by hand .

 Open the machine door.

 Remove the bean container and maintenance container on the lefthand side.

 Take the stainless steel cover off the central spout.

 Remove the milk valve cover as follows: on the top right-hand side of the cover, you will find a pin for swivelling the cover out.

3 2

1

 Detach the milk pipework from the dispensing unit on the central spout   and from the milk valve holder (  and   ).

 Remove the milk pipework   connecting the milk valve to the central spout.

 Disconnect the angular moulded hose from the round hose. Rinse the hoses thoroughly under running water.

99

Problem solving guide

Do not remove the connecting pieces from the hoses.

 Press the retainers on the left and right-hand sides of the milk valve holder and pull the holder forwards to remove it.

 Pull the stainless steel bolt upwards and out.

 Clean the individual components of the milk valve in the dishwasher.

Tip: If there are any dry milk residues on the front, soak the stainless steel bolt in warm water and a little washingup liquid before placing it in the dishwasher.

Fitting the milk valve

 Insert the stainless steel bolt from above.

 Insert the silicone seal into the milk valve holder.

 Take the holder and silicone seal apart.

100

Problem solving guide

 Insert the holder and silicone seal until they audibly click into place.

Tip: If necessary, screw the milk pipework backwards at the connecting piece on the right-hand side.

 Connect together the angular moulded hose and longer milk pipe.

Start by attaching the top of the moulded hose to the central spout.

The black connecting piece should be pointing to the rear.

 Then, connect the bottom end of the moulded hose to the dispensing unit.

 Insert the milk pipework into the milk valve on the left and right-hand sides.

 Check that the milk pipework is snug against the housing and that the cover can be easily attached.

 Attach the milk valve cover as follows: insert the pin in the top righthand corner and swivel the cover backwards until a proper fit is achieved.

 Push the left-hand bean container and maintenance container back into the coffee machine. Attach the central spout's stainless steel cover.

 Close the machine door.

101

After sales service and warranty

After sales service

In the event of a fault which you cannot correct yourself, or if the machine is under guarantee please contact:

– your Miele Dealer or

– Miele.

Contact details for Miele are given at the end of this booklet. N.B. A call-out fee will be charged for service visits where the problem could have been resolved as described in these instructions.

When contacting Miele, please quote the model and serial number of your coffee machine.

These can be found on the data plate:

Warranty

For information on the appliance warranty specific to your country please contact Miele. See back cover for address.

In the UK, your coffee machine warranty is valid for 2 years from the date of purchase. However, you must activate your cover by calling 0330 160

6640 or registering online at www.miele.co.uk.

102

These products and other useful accessories can be ordered via the

Miele webshop, from Miele (see back cover for contact details) or from your

Miele dealer.

– Microfibre cloth for removing finger marks and light soiling

– Cleaning agent for milk pipework for cleaning the milk system

– Cleaning tablets for degreasing the brew unit

– Miele cleaning cartridges for automatically cleaning the milk pipework and brew unit

– Miele descaling cartridge for automatic descaling

– Descaling tablets for manual descaling

– CJ JUG coffee flask

Vacuum flask for coffee or tea

(capacity 1 l)

– Miele Coffee Black Edition “One for All”

Perfect for making Espresso, Café

Crema and Coffee with milk.

– Miele Coffee “Espresso”

Perfect for making Espresso.

– Miele Coffee Black Edition “Café

Crema”

Perfect for making coffee.

– Miele Coffee “Decaf”

Perfect for making decaffeinated coffee.

Accessories

103

-

A

T

L

L

T

A

N

S

O

N

-

Installation

Mains water connection

 Danger of injury and machine damage if machine is not connected properly.

Failing to connect the machine properly can result in personal injury and/or material damage.

The machine may only be plumbed into the mains water supply by suitably qualified persons.

 Risk to health and risk of damage due to contaminated water.

The quality of the incoming water must conform to the requirements for drinking water in the country where the coffee machine is being used.

Connect the coffee machine to the water supply.

Connection to the water supply must comply with the applicable regulations in the country where the machine is being installed. All units and systems used to supply water to the coffee machine must also comply with the applicable regulations in the respective country.

Connect the coffee machine directly to a fresh water pipe.

Avoid connecting the coffee machine to a water supply in which the water might stagnate. Otherwise, the flavour of the drinks could be impaired.

The coffee machine meets the requirements of IEC 61770 and

EN 61770.

The coffee machine must only be connected to a cold water supply.

The back syphonage prevention system is already installed inside the machine in accordance with the applicable DIN standards.

The water connection pressure needs to be between 100 and 1000 kPa (1 and

10 bar).

A stopcock must be provided between the stainless steel hose and the household water supply to ensure that the water supply can be cut off if necessary. Make sure the stopcock remains easily accessible once the coffee machine has been installed.

Fitting the stainless steel hose to the coffee machine

Only use the stainless steel hose supplied. The stainless steel hose must not be shortened, extended or replaced by a different hose.

A faulty stainless steel hose must only be replaced by a genuine original Miele replacement hose. The food-grade stainless steel hose is available to order via the Miele webshop or directly from Miele (see back cover for contact details).

The stainless steel hose supplied is

1.5 m long.

 Remove the cover cap from the mains water connection at the back of the coffee machine.

104

-

A

T

L

L

T

A

N

S

O

N

-

Installation

 Take the angled end of the stainless steel hose and check whether there is a washer. If there is no washer, fit one.

 Screw the coupling nut on the stainless steel hose onto the stopcock.

 Ensure that the threaded union is properly connected and does not leak.

Connecting the water supply

 Disconnect the coffee machine from the power supply before connecting it to the water supply.

Close the stopcock before connecting the coffee machine to the water supply.

 Ensure that it is securely screwed into position correctly.

 Turn on the stopcock slowly and check the mains water connection for leaks.

Correct the position of the seal and union, if necessary.

You can now continue installing the coffee machine.

Make sure that the stopcock remains accessible after the machine has been installed.

A stopcock with 3/4" thread must be incorporated when connecting the coffee machine to the water supply.

 Check whether there is a washer. Fit one, if not.

 Connect the stainless steel hose to the stopcock.

105

-

A

T

L

L

T

A

N

S

O

N

-

Installation

Electrical connection

Before connecting the coffee machine, make sure that the connection data on the data plate (voltage and frequency) matches that of the electricity supply.

This data must correspond in order to avoid the risk of damage to the coffee machine. If in any doubt, consult a qualified electrician.

The voltage and frequency are given on the data plate located inside the machine. Please ensure these match the household mains supply. This data must correspond in order to avoid damage to the machine. The correct fuse rating must also be observed.

This machine is supplied with a cable and moulded plug (13 A in the UK) for connection to the mains electrical supply.

If possible, the socket should remain easily accessible. If the socket is no longer accessible after installation, an additional means of disconnection must be provided for all poles. Suitable means of disconnection include switches with an all-pole contact gap of at least 3 mm. These include circuit breakers, fuses and contactors

(EN 60335).

Do not connect the coffee machine to an off-grid inverter . These devices are used for autonomous power supply, e.g. a solar power system. Power surges could cause a safety shutdown.

This could damage the electronic module.

The coffee machine must not be used with “ energy saving plugs ”. These reduce the amount of energy supplied to the machine, causing it to overheat.

106

-

A

T

L

L

T

A

N

S

O

N

-

Building-in dimensions

Installation in a tall unit

A minimum installation height of 850 mm must be observed.

All dimensions are given in mm.

Installation

The machine can be combined with other Miele built-in appliances. In this case, there must be a full-width, closed shelf between them. If the machine it to be combined with a suitable built-in plate/food-warming drawer, no shelf is required in between.

107

-

A

T

L

L

T

A

N

S

O

N

-

Installation

Installation and connections

All dimensions are given in mm.

a Power cable b Mains water connection c No electrical or mains water connection in this area

108

-

A

T

L

L

T

A

N

S

O

N

-

Installation

Building in the coffee machine

 Danger of injury due to incorrect operation.

A machine that has not been built in is not safe and can cause injuries.

Do not operate the coffee machine unless it has been built in.

 Danger of damage due to incorrect operation.

If the ambient temperature range is not observed, the coffee machine may not function properly.

The coffee machine may only be operated within an ambient temperature range of +16 °C to

+38 °C.

A minimum installation height of

850 mm must be observed.

A door opening angle of 120° must be ensured so that you can remove the left-hand bean container.

Check that there is a gap of at least

299 mm between the wall (or similar) and the coffee machine so that you can open the door wide enough to remove the left-hand bean container (minimum door opening angle of 120°).

To install the machine, you will need a

TX 20 screwdriver.

Tip: It is useful to have somewhere at the height of the niche to place the machine on. This will make it easier to connect the machine to the electricity and water supplies.

Connecting the water and electricity supplies

Observe the information under

“Mains water connection” and

“Electrical connection”.

 Connect the coffee machine to the water and electricity supplies.

Pushing in and aligning the coffee machine

When pushing the machine into the niche, make sure that the electrical and mains water connections do not get trapped or damaged.

 Push the coffee machine all the way into the niche until you feel a resistance.

 Check the height of the coffee machine to make sure that it is sitting centrally in the niche and that it is level. Align the machine.

Never align the coffee machine by adjusting the door hinges. This will prevent the milk flask from attaching correctly and interfere with the milk preparation process.

109

-

A

T

L

L

T

A

N

S

O

N

-

Installation

Now screw the coffee machine to the furniture unit.

 Open the machine door.

Door opening limiters

The coffee machine door hinges are equipped with door opening limiters that restrict the opening angle of the machine door to approx. 120°. This will prevent the machine door from hitting an adjacent wall and being damaged when opened.

The door opening limiters can be removed, allowing you to increase the opening angle to approx. 170°. This makes it easier to remove the bean containers, for example.

Two TX20 (25 mm) screws are included with the machine.

 Secure the coffee machine to the side walls of the furniture unit using the screws supplied. Tighten both screws by hand.

Tip: To make it easier to attach the screw on the left, you can remove the door opening limiters and increase the door opening angle to approx. 170°

(see “Door opening limiters”). Make sure that there is sufficient space available and that the machine door is not going to hit an adjacent wall.

 Carry out a functional check on the coffee machine.

Removing the door opening limiters

Make sure that sufficient space is available for the larger door opening angle and that the machine door is not going to hit an adjacent wall.

110

-

A

T

L

L

T

A

N

S

O

N

-

 Remove the door opening limiters from the hinges, e.g. by prising them out with a screwdriver.

The machine door opening angle has now been increased to approx. 170°.

Installation

111

Conformity declaration

Miele hereby declares that this coffee machine complies with Directive

2014/53/EU.

The complete text of the EU declaration of conformity is available from one of the following internet addresses:

– Products, Download from www.miele.co.uk

– For service, information, operating instructions etc: go to www.miele.co.uk/domestic/ customer-information-385.htm and enter the name of the product or the serial number

Frequency band of the WiFi module

Maximum transmitting power of the WiFi module

2.4000 GHz –

2.4835 GHz

< 100 mW

112

Copyrights and Licences

Miele uses their own and third party software which is not subject to any so-called

Open Source Licence for the operation and control of the appliance. This software/ these software components are protected by copyright. The copyright powers of

Miele and third parties have to be respected.

Furthermore, this appliance contains software components which are distributed under Open Source licence conditions. Please refer to Settings  | Legal information  |

Open Source licences in the appliance for the Open Source components contained therein, together with the corresponding copyright notices, copies of the licence terms valid at the time, and any further information. The liability and warranty provisions of the Open Source licence terms and conditions as stated therein apply only in relation to the respective rights holders.

In particular, the appliance contains software components licenced by the copyright holders under the GNU General Public License, Version 2, or the GNU

Lesser General Public License, Version 2.1. For a period of at least 3 years from the date of purchase or delivery of the appliance respectively, Miele offers to provide you or third parties with a machine-readable copy of the source code of the Open Source components contained in the appliance and licenced under the terms of the GNU General Public License, Version 2, or the GNU Lesser General

Public License, Version 2.1, on a data carrier (CD-ROM, DVD or USB stick). Please contact us via e-mail ([email protected]) or the below postal address and state the product name, the serial number and the date of purchase to obtain this source code.

Miele & Cie. KG

Open Source

GTZ/TIM

Carl-Miele-Straße 29

33332 Gütersloh

Please note the limited warranty in favour of the rights holders under the terms of the GNU General Public License, Version 2, and the GNU Lesser General Public

License, Version 2.1:

This program is distributed in the hope that it will be useful, but WITHOUT ANY

WARRANTY, without even the implied warranty of MERCHANTABILITY of FITNESS

FOR A PARTICULAR PURPOSE. See the GNU General Public License and GNU

Lesser General Public License for more details.

113

United Kingdom

Miele Co. Ltd.

Fairacres, Marcham Road

Abingdon, Oxon, OX14 1TW

Tel: 0330 160 6600

Internet: www.miele.com

Australia

Miele Australia Pty. Ltd.

ACN 005 635 398

ABN 96 005 635 398

1 Gilbert Park Drive

Knoxfield, VIC 3180

Tel: 1300 464 353

Internet: www.miele.com.au

China

Miele (Shanghai) Trading Ltd.

1-3 Floor, No. 82 Shi Men Yi Road

Jing' an District

200040 Shanghai, PRC

Tel: +86 21 6157 3500

Fax: +86 21 6157 3511

E-mail: [email protected],

Internet: www.miele.cn

Miele (Hong Kong) Limited

41/F - 4101, Manhattan Place

23 Wang Tai Road

Kowloon Bay, Hong Kong

Tel: (852) 2610 1025

Fax: (852) 3579 1404

Email: [email protected]

Website: www.miele.hk

India

Miele India Pvt. Ltd.

Ground Floor

Copia Corporate Suites

Plot No. 9, Jasola

New Delhi - 110025

Tel: 011-46 900 000

Fax: 011-46 900 001

E-mail: [email protected]

Internet: www.miele.in

Ireland

Miele Ireland Ltd.

2024 Bianconi Avenue

Citywest Business Campus

Dublin 24

Tel: (01) 461 07 10

Fax: (01) 461 07 97

E-Mail: [email protected]

Internet: www.miele.ie

Malaysia

Miele Sdn Bhd

Suite 12-2, Level 12

Menara Sapura Kencana

Petroleum

Solaris Dutamas No. 1

Jalan Dutamas 1

50480 Kuala Lumpur, Malaysia

Phone: +603-6209-0288

Fax: +603-6205-3768

New Zealand

Miele New Zealand Limited

IRD 98 463 631

Level 2, 10 College Hill

Freemans Bay, Auckland 1011

New Zealand

Tel: 0800 464 353

Internet: www.miele.co.nz

Singapore

Miele Pte. Ltd.

163 Penang Road

# 04 - 03 Winsland House II

Singapore 238463

Tel: +65 6735 1191

Fax: +65 6735 1161

E-Mail: [email protected]

Internet: www.miele.sg

South Africa

Miele (Pty) Ltd

63 Peter Place, Bryanston 2194

P.O. Box 69434, Bryanston 2021

Tel: (011) 875 9000

Fax: (011) 875 9035

E-mail: [email protected]

Internet: www.miele.co.za

Taiwan

K.E. & Kingstone Co., Ltd.

6th Fl., No. 120, Sec. 2

Jianguo N. Rd.

Taipei, Taiwan

TEL: +886 2 2502-7256

FAX: +886 2 2502-3077

E-mail: [email protected]

Website: www.kenk.com.tw/ke/miele

Thailand

BHIRAJ TOWER at EmQuartier

43rd Floor Unit 4301-4303

689 Sukhumvit Road

North Klongton Sub-District

Vadhana District

Bangkok 10110, Thailand

United Arab Emirates

Miele Appliances Ltd.

Gold & Diamond Park

Office No. 6-217

Sheikh Zayed Road

P.O. Box 11 47 82 - Dubai

Tel. +971 4 3044 999

Fax. +971 4 3418 852

800-MIELE (64353)

E-Mail: [email protected]

Website: www.miele.ae

Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany

CVA 7845 en-GB M.-Nr. 11 203 280 / 0

1

advertisement

Key Features

  • Built-in Fully-auto Drip coffee maker 2.7 L
  • Coffee beans, Ground coffee
  • Built-in grinder Hot water system Built-in display
  • Coffee making Espresso making Cappuccino making
  • Black, Stainless steel

Related manuals

advertisement

Table of contents