Vents KOM...U Installation guide

Vents KOM...U Installation guide
BACKDRAUGHT DAPMER
KOM ... U SERIES
INSTALLATION GUIDE
APPLICATION
Shutoff of the air flow in the round air ducts and prevention of the air backdraft during standstill of the ventilation
•
equipment.
•
The air blades are opened with the air pressure and are closed with a spring.
DESIGN
The damper housing is made of galvanized steel.
•
•
The foam rubber sealing on the damper reduces operation noise and provides extra air tightness.
•
The two the spring-loaded blades are made of aluminium sheet.
INSTALLATION
TOOLS REQUIRED
Phillips screwdriver
Сlamp
Aluminium tape
DAMPER POSITIONING IN THE AIR DUCT
Swivel axsi of the blade must be positioned vertially.
The air damper must be installed in the ventilation system considering the air flow direction.
MOUNTING WITH CLAMPS
Connect the air damper with flexible air ducts and fix the
air ducts to the damper using the clamps.
MOUNTING WITH A MOUNTING TAPE
Connect the air damper with air ducts and fix the connection place using a mounting tape.
Clamp
Aluminium tape
ventilation-system.com
V151EN-01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement