Barska AW11880 Owner's manual

Barska AW11880 Owner's manual
Front Sight with Integrated Red Laser Sight
WARNING: BE CERTAIN THAT YOUR FIREARM
IS NOT LOADED AND POINTED AWAY FROM YOU
IN A SAFE DIRECTION
ATTENTION: THIS BARSKA LASER SIGHT IS A POWERFUL
TARGETING DEVICE THAT REQUIRES SPECIAL ATTENTION
WHEN OPERATING. CAREFULLY READ THE FOLLOWING
INSTRUCTIONS AND SAFETY PRECAUTIONS BEFORE USING
THIS PRODUCT.
CAUTION: UNAUTHORIZED USE MODIFICATIONS OF
ADJUSTMENTS OR PERFORMANCE OF PROCEDURE OTHER
THAN SPECIFIED HEREIN MAY RESULT IN
DANGEROUS/HAZARDOUS RADIATION EXPOSURE.
LASER LIGHT: AVOID DIRECT EYE EXPOSURE.
WARNING KEEP OUT OF REACH OF CHILDREN.
DO NOT POINT LASER AT PEOPLE, PETS, SHINY/HIGHLY
REFLECTIVE SURFACES, AIRPLANES OR ANY OTHER OBJECT
NOT INTENDED FOR DESIGNATED USE.
1. Mount laser to weaver/picatinny mount and attach to firearm
with large thumb screw. Tighten securely in place.
2. To sight in your laser to your firearm turn laser on, use
smaller allen wrench to adjust windage and elevation
(left and right, up and down) as needed.
3. Laser needs to be zeroed in at one preset distance, with a
max range of 500yds.
4. To adjust the height of the front site use tool
shown in picture on the right.
(Tool Not Provided)
1/15
BC413
©2015 BARSKA® | Pomona, CA 91767 USA
www.barska.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement