Fantec BeastVision HD Manual
Advertisement
Advertisement
Table of contents
2
1. Precautions
1. This camcorder is a precision product. Please do not drop it or hit it physically.
2. Keep the camcorder away from any object with a strong magnetic field, like magnet or electromotor, or any object emitting strong radio waves, like antenna, as a strong magnetic field may cause failure to the device or cause damage to image and audio data.
3. Do not expose the camcorder to high temperature or sunlight directly.
4. Keep the Micro SD card away from the strong magnetic field of TV, speaker, or magnet. Do not put it in any place with potential static, or the data stored on it may be lost.
5. If the camcorder overheats, smokes or smells while charging, please disconnect the USB cable or the USB power adapter immediately to avoid the risk of fire.
6. Put the device out of reach of any child while charging, as the power cord may cause an accidental suffocation or electric shock to the child.
7. Please keep this product in a cool, dry, and dust-free place.
2. Product Certification
Certified by FCC and CE, this product complies with the recommended standards and guarantees the user's safety.
3
3. Preface
Thanks for purchasing
FANTEC’s BeastVision HD hands-free mini high-definition digital camcorder.
Due to its small size and design, the hands-free camcorder is easy to operate. Supported by highdefinition and dynamic image capturing technology, it can record real scenes and various activities anytime and anywhere and you can share wonderful recording experiences with your family and friends. This manual specifies how to use and install the device and provides detailed information, including the instructions on use, operation and installation as well as the technical specifications.
Please read this manual carefully.
1. Repair
If the device has a problem, you should take it to an appointed repair center and let the specialists do the repair, never repair the player yourself, you might damage the device or endanger yourself or your data.
2. Disposing of the Camcorder
When you dispose the camcorder, be sure to dispose it appropriately. Some countries may regulate disposal of electrical device, please consult with your local authority.
3. Others
Do not disassemble the camcorder, repair or change the design of it, any damage done will not be included in the repair policy.
Do not press the buttons of the device too hard.
Avoid hitting the player with hard object, and stay away from magnetic fields.
During electrostatic discharge and the strong electromagnetic field, the product will malfunction, then remove the battery and the product will return to normal performance next time it is powered on.
4
4. Product Overview
As a multifunctional high-definition digital sports video camcorder, this product provides many functions such as high-definition recording, digital photographing, voice storage, real-time display, photo shooting, time display, remote control, digital zoom, TFT color screen, multi-functional keys, laser indication, high-speed USB data transmission, HDMI high-definition output function, low power indication, memory card space display and USB charging.
Do not litter! Please recycle!
Note:
All the information contained in this manual was correct at the time of publication. However, as our engineers are always updating and improving the product, your device’s software may have a slightly different appearance or modified functionality than presented in this manual.
5
5. Function and Features
1. 170° extra-large wide-angle lens; Aperture f/2.8
2. Specialized HD Camcorder, supporting 1080I/1080P/960P/720P high-definition video recording
3. Photo shooting function, supporting 8.0 Megapixels (3200x2400)
4. 10x digital zoom function
5. Various shooting modes available: Single shooting, three photos continuous shooting, auto continuous shooting
6. Self-timer function
7. Voice recording function
8. Wireless remote control function
9. Image rotation of 180º (over head recording)
10. Laser indicating function
11. Video loop coverage function
12. With LCD segment screen and split TFT main screen, to display various working modes in real time
13. With waterproof case, the waterproof grade is IP68, the waterproof depth is up to 60 meters, and it has two back cover designs
14. TFT display screen, to play and playback videos, and photos
15. With built-in dismountable high-capacity lithium battery, it can be re-charged
16. Better image effect, three video output modes available
17. Battery power detection and Micro SD card free space detection
18. High-speed dynamic video recording, supports instant response for bright and dark environments
19. Three photo metering modes for various shooting circumstances
6
20. Delicate and stylish exterior design
21. HDMI high-definition interface and AV output interface, to connect a high-definition display device or TV to view files
22. Supporting a Micro SD card up to 64GB (Class 10 recommended)
23. High-quality color fidelity, clearer and more realistic image
24. Remote control for video recording, stopping and shooting by using wireless remote control
(unique code pairing function, avoiding interference with other remote control)
25. Recording MOV videos, can directly played by PC or uploaded onto video websites
26. Auto standby power-saving function
27. Supports fast forward and fast rewind (1/4x/1/2x/2x/4x/8x/16x)
28. Supports time setting (RTC function) and time superposition function
29. Supports USB2.0
30. Built-in stereo microphone, high-quality voice recording effect
31. Various sports accessories, truly enables sport video recording
32. Steady shot: maintain the normal function after being dropped or stricken
33. Good seismic resistance
34. Settings auto saving mode
7
6. Product Structure
1. TFT Display screen
2. MENU key
3. Up key
4. Left key
5. Down key
6. Playback key
7. OK key
8. Remove TFT button
9. Lanyard hole
10. Buzzer
11. SD card slot
12. Right key
13. AV out interface
14. Record key
15. Video/Voice record LED (green)
16. Power switch
17. Microphone
18. Working/ Charging LED (red)
19. LCD segment screen
20. Shutter
21. Stop key
22. Camera lens
23. Recording/ shooting LED (blue)
24. Laser transmitter
25. HDMI out interface
26. USB device interface
27. Thread interface
8
7. Installation
1. The device can be used in handheld or hands-free mode and combined with various non-hand-held accessories. The camcorder can be installed wherever you like, even operation in the water by the waterproof casing is possible.
The installation is shown as follows: a) Installation and removal of the TFT display screen and the main body b) Installation of the main body
screen
without
TFT display
into the waterproof case
2. Installation of remote control.
Please install the remote control onto the correct position based on the accessories below:
1. Velcro 2. Clip 3. Binding tape (optional)
9
8. Operating Instructions
1. Start up
Turn the power switch to “ON” to start up the device.
2. LCD segment screen icons:
a) Record mode: The current record mode can be viewed on the top left corner of the LCD segment screen, this symbol “ ” indicates the video recording mode and this symbol “ ” indicates the voice recording mode. b) Photo shooting indicator
: The shooting icon “ ” can be viewed on the LCD segment screen. The icon will twinkle one time when shooting one photo. c
) Power icon: The power icon “ ” can be viewed on the top right corner of the LCD segment screen.
The icon is visible constantly after the device is running and the disappearance of the icon means the device is shut down or has entered the standby mode. d) Video recording duration: The duration of the current video recording is displayed on the middle line of the LCD segment screen, and is indicated by this display
“ ”. The video recording duration will start displaying when pressing “Record” key, and it will stop when pressing “Record” key once again.
Note:
The video recording duration on LCD segment screen and TFT display screen is displayed synchronously.
10
e
) Indication of battery power: The battery power icon “ ” can be viewed on the bottom left corner of
LCD segment screen and it will indicate the battery power status after starting up. The more black grids the higher the remaining power. f) USB connection: The USB mode icon “ ” can be viewed on the LCD segment screen and it indicates whether the device is connected with the computer. The green indicator light on the left twinkles slowly. The icon appears after connecting with a computer in operating mode and it will not be displayed when not connecting with computer. g) Micro SD card capacity indication: The Micro SD card capacity icon “ ” can be viewed on the bottom right corner of LCD segment screen to indicate the capacity of the Micro SD card. The more black grids the higher the spare capacity. The green indicator light on the left remains shinning when the card is out of memory.
3. TFT display screen icons
a) Work mode:
The video recording icon “ ” on the top left corner of the TFT display screen indicates that it is in video recording standby mode. b
) Battery power: The battery power icon “ ” on the bottom left corner of the TFT display screen indicates the remaining power of the battery. c) Resolution of video recording: 1080P/1080i/960P/720P/WVGA on the bottom left corner of the TFT display screen indicates that the system is in 1080P/1080i/960P/720P/WVGA mode. d) Spare storage capacity: Information of whether an external card is installed " or ". The spare storage capacity " " can be viewed then on the bottom right corner of the TFT display screen.
11
e) It cannot respond operations of "<" and ">" under the preview mode. f) The device can be charged with the attached USB cable (optional power adapter available, too): The
“Red Indicator of Working/ Charging” on the top of the unit will twinkle slowly during charging and it will stay constantly red after fully charged. The charging duration is about 3h.
Note:
Before use, please check if there is enough battery power. In case of a low battery, please charge the device via the attached USB cable.
The “Red Indicator of Working/ Charging” will twinkle slowly during charging and if the battery is fully loaded, it remains shinning constant.
4. Format the Micro SD card
Please select particularly a high-speed Micro SD card only and format it via the device before recording videos, voice or taking photos. If the Micro SD card has ever been used on other devices, please format it on device first.
Note:
Please confirm whether files on the internal memory of the device and on the Micro SD card are needed before operating. Locked files on the device can be removed by formatting the internal memory.
12
5. Set the date/ time
In preview mode, press “M” key to enter the menu interface, press “>” key to shift to the setup interface
“ ”, press “ + ” or “ - ” key to select the menu “Date/Time”, and then press “OK” key to enter the setup interface of “Date/Time”. Then press “OK” key again to finish. Characters/ numbers showing date or time turn blue when the cursor appears.
Press “+” or “-” to reset the date or time. Press “OK” to confirm the revision. Press “M” to exit the setting interface.
In preview mode, press “M” key to enter the menu interface, press “<” or “>” key to move the cursor left and right and press “+” or “-” key to move the cursor up and down. After selecting the menu, press “OK” key to set the selected menu and press “M” key again to exit.
(The parameters set will resume even in case the product needs to be powered off or restarted. In order to have a different mode, please read the product manual.)
13
9. Parameter & Settings
1. Setting of Camcorder parameter:
a) Video resolution: Select 1080P, 1080i, 960P, 720P, WVGA b) Visual Angle: The camcorder supports three visual angles (default setting is “Wide Angle”).
Wide Angle “ “ Middle Angle “ ” Narrow Angle “ ”
Same image with different visual angles Comparison of same scene in different angles
Wide Angle
Middle Angle
Narrow Angle c) Bit rate: The camcorder supplies two options, fine “ “and normal ” “ (default setting is “fine”).
A clearer image results a higher bit rate and a larger file size.
14
d) Laser Synchronous Shooting: Turn on
” ” or turn off “ “ the laser transmitter (default setting is “OFF”). e) Shooting M ode: Select video recording “ ” or voice recording “ ”. f) Pre-Recording Mode: In preview mode
, press “M” to enter the mode selection interface and select
“Pre-Recording”. Press “REC” key to enter pre-recording mode. The video will be buffered for 5 seconds until you p ress “REC” key again to start regular video recording. The buffered video taken in the last 5 seconds of pre-recording mode are now at the beginning of the regular video. g) Self-Recording Mode: In the preview mode
, press “M” to enter the mode selection interface. Select
“Self-Recording” mode and choose an option from “OFF”, “3 Seconds”, “5 Seconds” or “10 Seconds” to set the countdown time before video starts recording. h) Photo Rotation Mode: In the preview mode
, press “M” key to enter the mode selection interface and select “Photo Rotation” to have upward photos when the camcorder is in a reverse position. i) Time display: In the preview mode
, press “M” key to enter video setting interface. If the “Time
Display” is activated, the shooting date and time will automatically appear at the right bottom of the screen during video recording.
Shooting date and time will not appear on the screen in case “Time
Display” is not activated.
15
Note: a) In
“Voice recording mode”, press “Record” key and the system starts recording. Voice recording duration is displayed on the bottom of the TFT display screen and the green indicator twinkles slowly; if press “Record” key again, the system will stop and save the current audio file.
The green indicator turns off and the red indicator remains bright and the unit returns to the preview mode (the corresponding operation is displayed on the LCD segment screen). b) During
“Sound recording”, the product is responsive only when pressing “Stop”, “Off” or “M” key. If you may switch to video recording, the sound recording will be automatically stopped and saved. c) The laser icon will be displayed on the top left corner of the preview interface when turning on the function of
“Laser synchronous shooting”, which indicates the system is in this shooting mode. At this time, the laser will be turned on when starting recording and it will be turned off when stopping recording. d)
When “Pre-recording” and “Self-recording” mode are both activated, press “REC” key during prerecording to start self- recording countdown. Press “REC” key again to start self recording and the clips taken in last few seconds in pre- recording status can be saved as the beginning of the video.
2. Setting the camcorder parameter:
a) Image resolution: Select 3M, 5M or 8M. b
) Single shot: Press “Shutter” once can take one photo. c) Triple Shot: P ress “Shutter” once can take three photos continuously. d) Continuous shoot: Takes one photo every 0.5s/1s/2s/5s/10s/20s/30s/60s until you press a key to stop, the card is full or the power is run out.
16
e) Self-Timer Mode: Select time to count down (“3s”, “5s” or “10s”) and press “M” to return to preview status. Press “Camera” and the countdown starts. The self-timer indicator light flashes after the countdown takes a snapshot. The self-timer mode remains activated as default. In order to switch to single snapshot mode, please manually turn off self-timer mode. f) Time display: In the preview st atus, press “M” to enter the camcorder setting interface. If “Time
Display” is activated, the shooting date and time will automatically appear at the right bottom of the screen during shooting.
Shooting date and time will not appear on the screen in case “Time Display” is not activated.
Note: a) The self-timer mode remains activated as default. In order to switch to single snapshot mode, please manually turn off self-timer mode. b) The self-timer mode and continuous shooting mode cannot be activated at the same time.
3. Setting of system parameter:
a) Beep: Turn on or turn off the key tone. b) Self lamp: Please turn it on or off before self timing, the default setting is “ON”. c) Loop coverage: The video/ audio file will be auto saved in segment once every 15 minutes when setting
“Loop Coverage”. If it is not set, the video/ audio file will be auto saved in segment once every
30 minutes.
Note:
The current actual segment file is determined by the file size set, but not determined by the true time, that is to say, the file will be segmented more than 15/30 minutes at a dark environment.
17
d) Auto standby: Set the auto standby time to 0, 2 minutes, 5 minutes or 10 minutes. I f there’s mission or operation, the system will start the standby countdown and the device will turn off. If there is an operation during the countdown, the system will restart it. If video recording or the shutter is operated in the standby mode, the device will be waked up. The default standby time is 5 minutes. e) TV output format: NTSC or PAL video format output to TV. If the selected format is changed, please unplug the AV cable and then reinsert it to update the parameters. f) Contrast Ratio: The product is preset with standard contrast ratio. If necessary, the contrast ratio can be increased for a better night shot. g) ISO Sensitivity: The preset ISO sensitivity is activated as default. If necessary, ISO800 can be set for a better night shot. h) Exposure: Even if exposure is activated as default to achieve good exposure of the photos, in case the scene looks dark in comparison with light surroundings, you can choose center exposure mode. In case the scene looks light in comparison with dark surroundings, choose dot exposure mode. i) Format: After confirming that all files recorded are not needed to be saved, all files can be removed by formatting.
Note:
If there is no card inserted, the memory of the unit will be formatted. After inserting a card, the system will format the card, but not the internal memory unit.
18
j) Factory default: This operation is setting all parameter to factory default. The system will set the display mode to
English. Press “M” key to enter the menu selection, press “<” or “>” key to enter the menu “Setup”, press “-“ key to select the option “Language”. k) Language:
“English” or “German” can be selected via left or right key. l) Date/Time: The time can be adjusted. It will be displayed on the bottom right corner of the video file or photo file when recording or shooting.
Note:
P ress “M” key under the submenu to exit the settings of the submenu.
19
10. Operation
1. Memory card
Insert the Micro SD card.
2. Preview mode
Turn the power switch to “ON” to turn on the device and the red indicator will be lightened and the unit will enter the preview mode.
Note: a
) In case of low battery power, you will find the battery icon “ ” and the message “Low Power” on the
TFT screen. b
) If no Micro SD card is inserted, this Micro SD card icon “ ” is shown on the TFT screen.
3. Video recording:
Press the “Record” key in preview mode to start recording. The video recording duration will be displayed on the top right of TFT display screen. During video recording process you can zoom in (“+” key) and zoom out (“-” key). If press “stop” key, the system will stop and save the current video and the front side blue indicator will turn off.
Note: a) If you t urn the power switch to “OFF” during video recording, the system will save the current file and then shut down. b) If the battery power is getting to low during video recording, the system will save the current file and
20
give the message
“Low Battery” on the TFT display and then turn off c) If the memory space gets full during video recording, the system will save the current file and give the message
“card is full” on the TFT display screen then and go back to the preview mode. The video recording duration on the LCD screen also will stop displaying. d) In cyclic recording mode, the system will auto save a file every 15 minutes. (The self-timer mode and continuous shooting mode cannot be activated at the same time) e) After it the unit is fully charged, the continuously record time is about 2.5 hours. The continuous voice recording time is about 3 hours. f) Pressing
“+” or “-” key in voice recording mode cannot increase/ reduce the volume; however pressing
“+” or “-” key in audio playback mode can increase/ reduce it. g) Connect the unit to high-definition display device with HDMI cable in preview mode and the basic operation of the unit can be finished on the high-definition display device.
4. Photo shooting
You can set the image resolution before shooting photos. Press “M” key to enter the setup interface, pres s “>”or “<” key to move the cursor to “ ”, select “Image Resolution”, and press “OK” key to enter the resolution setup menu. There are three resolution modes available:
3M: Photo shooting resolution of 2048x1536;
5M: Photo shooting resolution of 2592x1944;
8M: Photo shooting resolution of 3200x2400; a) Single shot:
In preview mode, press “Shutter” to take a photo with a “Click” sound. The front side red indicator will twinkle (the photo shooting icon on LCD segment screen will twinkle) and it will return to the preview mode.
21
b) Triple shot:
Press “M” key to enter the camcorder setup interface, press “>”or “<” key to move the cursor to “ ”, and then press “+”or “-” key to select the menu “Three Photos Continuous Shooting”, and press “OK” key to confirm. Press “M” key to exit the setup interface. Pressing “Shutter” once at this time the unit will continuously shoot three photos. c) Continuous shoot:
Press “M” key to enter the camcorder setup interface, press “>” key to move the cursor to “ ” and then press“+”or “-” key to select the menu “Continuous Shooting”, and press “OK” key to set the continuous shooting interval time to
0.5s,1s,2s,5s,10s, 20s,30s,60s. Press “M” key to exit the setup interface. Press “Shutter” at this time, and the unit will start shooting one photo every
0.5s, 1s, 2s, 5s, 10s, 20s, 30s, 60s until you press “Shutter” key again to stop. d) Self Shot:
Press “M” key to enter the camcorder setup interface, press “>”or “<” key to move the cursor to “ ”, and then press“+”or “-” key to select the menu “Self-timer”, and press “OK” key to set the delay time as 3s, 5s or 10s. Pres s “M” key to exit the setup interface. Press “Shutter” once and the unit will start the timer and take a single photo at the end of the delay time.
Note: a) If the memory space gets full, the system will give the messa ge “card is full' on TFT display screen and goes back to the preview mode b) The self-timer has to be re-started in order to take another self-shot.
22
5. Voice recording
Press “M” key to enter the Camcorder setting interface, select “Capture Mode”, press “OK” key to enter the selection i nterface, press “<” or “>” key to select “ ”, press “OK” key to confirm your selection, and finally press “M” key to exit the setup interface. Press the “Record” key to start recording, and the green indicator twinkles slowly, the TFT screen displays the voice recording icon, and the timer is started. The voice recording duration will be displayed on the top right of TFT display screen, the
“Blue Indicator of Video/Voice Recording” and the front side “ Video Recording/Shooting Indicator
(Red)” will twinkle slowly, and the recording duration is displayed on the LCD. If pressing the “Stop” key, the system will stop and save the current audio file. After voice recording, press “M” to return to system setting interface. Click “Capture Mode” and press “OK” to enter the selection interface. Press
“<” or “>” key select “ ” to exit the voice mode.
Note:
After re-starting the unit, it will always switch back to video recording mode.
6. File playback
You can directly view the audio, video and photo files on the device.
Press “ ” key to enter the playback selection interface and press it again to exit. Select the video file interface “ ” to view video files, select photo file interface “ ” to view photos. If selecting mixed file interface “ ” you can view all video, audio and photos files. The more playback files are stored on the unit, the more times it takes to enter the preview interface.
23
a) Video playback:
Enter “ ” interface and all files appear on the screen. Select the video file by pressing “>” or “<” and press “OK” to playback. You can use the following functions:
+ Volume UP - Volume Down
< Fast rewind > Fast forward
1. Reset the playing from the beginning.
2. Press it again to return to playback interface.
OK Play / Pause b) Fast Forward/ Backward can be set to 1/4x, 1/2x, 2x, 4x, 8x, 16x. c) Photo playback:
Enter “ ” interface and all files appear on the screen. Select the photo file by pressing “>” or “<” and press “OK” to view. You can use the following functions.
+ 1.Zoom
2.In zoom in mode, press “OK” to move the photo downward
- 1.Zoom
2.In zoom in mode, press “OK” to move the photo upward
< Move Photos Right > Move Photos left
Return to playback interface
OK In zoom in mode, the photo can be zoomed in or out by pressing “+” or “-”. d) Audio playback:
Enter “ ” interface and all files appear on the screen. Select the audio file by pressing “>” or “<” and press “OK” to play. You can use the following functions.
+ Volume UP - Volume Down
24
1. Reset the playing from the beginning.
2. Press it again to return to playback interface.
OK Play / Pause
Fast Forward/ Backward options are not available under audio playback mode. e) Auto play: Playback the photo files in the folder at an interval of 5s.
(Default setting is “OFF ”)
7. Delete or protect files
In playback mode at first select the file and then press ”M” key. Now you can use the following functions: a) Delete file option. After pressing “OK” key you can select to delete a single file or delete all files.
Please confirm your selection by “ ” or cancel by “ ”. b) Protect file option. All files can be set to protected or unprotected mode. After pressing “OK” key you can select to protect/ unprotect a single file or protect / unprotect all files.
Note:
For protected files the icon “ ” will appear on the bottom left corner. Unprotected files will be indicated by the icon “
"
. It’s not possible to delete protected files by the unit itself. Either you unprotect it again or you have to format the memory card.
8. Remote control
You can use the remote control (optional available) to remote video recording, photo shooting and turn the laser function on/off. The red indicator on the remote control will twinkle once when you press any of the following keys.
25
Record
Shutter
Stop
Press the Shutter key for 3 seconds to turn on or of the laser function.
Please follow the steps below to pair the remote control before the first usage.
Press and hold the “Record” key of the device, turn the power switch to “ON”, and then release the
”Record” key of the device after 3 seconds.
Then press
“Record” and “Stop” key on the remote control at the same time for 3s to finish the remote control pairing process. The device will tick twice after pairing the remote control successfully.
To test the correspondence of the remote control and the device, keep the Shutter button pressed for 3s to turn on/off the laser function.
Note: a) The remote control functions include: Video recording starting/stopping, photo shooting, standby mode and laser light turning on/off. The device will tick once for each operation. In case of video record stopping or laser light turning off, the device will tick twice. b) Remote control range: The remote control can work within 15 meters (horizontally without barriers). c) Press ing “Record” , “Shutter” or “Stop” key on the remote control can wake up the device out of the standby mode.
9. Standby mode:
T urn the power switch to “ON” to enter preview mode. If there’s no operation within the selected standby time, the system will auto enter the standby power-saving mode. Pressing
“Record” or
“Shutter” key at the device or any key on the remote control can wake up the device again.
26
Note: a) Pressing keys on the TFT screen cannot wake up the device out of the standby mode. b) The LCD segment screen does not display anything in standby mode.
10. AV output:
In preview mode, connect the device with the AV cable (optional available) to a display unit like TV, projector, monitor or equal and then the device can be operated via the display unit.
Note:
After connecting the AV cable, the TFT screen and the audio output of the device will be turned off and directly played on the display unit. The LCD segment screen on the device is still running.
11. HDMI output
In preview mode, connect the device with Mini-HDMI cable (optional available) to a display unit like TV, projector, monitor or equal and then the device can be operated via the display unit.
Note:
After connecting the Mini-HDMI cable, the TFT screen and the audio output of the device will be turned off and directly played on the display unit. The device may be working abnormal, if the HDMI cable is inserted or unplugged improperly. It can be recovered after re-starting the device. The LCD segment screen on device is still running.
12. USB connection:
a) When there is no battery inside of the device, use the USB power adapter (optional available) to connect it to the device. All functions can be operated meanwhile.
27
b) In operating mode, use the provided USB cable to connect the device to a computer. All data stored on the internal memory of the device and on the Micro SD card can be accessed in read / write mode.
At this time, the LCD segment screen will display the USB connection icon.
Note:
If you don’t have the USB power adapter, the battery inside of the device can be charged by the USB port of the computer by the use of the provided USB cable.
13. Key tone indication
a)
Press “Record” or “Shutter” key in normal use and the device will tick one time to confirm the operation. b) When video recording is stopped, the device will tick twice. c) Device will tick twice to indicate the successful pairing with the remote control. d) If you p ress “Shutter” key during video recording, the device will not give a confirmation. e) If the system is video recording mode an you press the
“Stop” key on the remote control, the device will tick twice to indicate the stopping of video recording. f) Pressing any key on the remote control in if the device is in standby mode, the device will tick one time and wake up out of the standby mode. g) To turn off the key tone, press “M” key in preview mode, then press “>” or “<” key to enter the
“Setup”, press “+” or “-” key to select the menu “Key Tone”, and then you can turn on or turn off the key tone.
28
14. Laser light indication
a) Press the
“Record” key for 3s and the system will turn on or off the laser light. b) The laser light turning on/off also can be operated in standby mode. c) The wireless remote control can turn on or off the laser light by pressing the “Shutter” key for 3s.
Note:
Turning on/off the laser light does not affect the parameter setting of turning on “Laser Synchronous
Shooting”.
15. Turning On/Off the TFT Display
a) Pressing the “Shutter” key on the device for 3 seconds will turn on or off the TFT display. b) The TFT display can’t be turned on or off by pressing “Shutter” key on remote control.
29
11. File Storage and Playback
1. Storage
Via the provided USB cable you can copy or move the recorded video files to your computer.
Otherwise you can remove the Micro SD card and insert it into a card reader. Then you can select software like Media Player or VLC Media Player to playback the videos.
It’s even possible to playback the video directly with FANTEC’s Full HD media players like e.g. FANTEC 3DFHL, FANTEC AluMovie
HD, FANTEC P3700, FANTEC P2700, FANTEC 3DS4600, FANTEC MM-FHDL, etc.
Note: a) Please turn off the device before inserting or unplugging the USB cable. b)
Turn the power switch to “OFF” before charging device. The red indicator will twinkle slowly in charging. c) You can directly copy or move the recorded files to your computer when the power switch is turned to “ON”.
30
2. Playback
You can use a Mini-HDMI cable or an AV cable (optional available) to connect the device to a TV or monitor with HDMI or AV interface.
Note: a) After connecting the device via Mini-
HDMI cable, please select the HDMI input source of the TV. If you select the AV cable, please plug all colored connectors to the corresponding interfaces of the TV.
12. Additional Backup Battery Installation
1. Installation
The provided additional external battery can be installed as shown at the below figure. It will extend the working time of the device.
31
2. Check battery power status
Press the left side button to view the state of charge of the backup battery. One of the LED lights will flash for 3 seconds and will indicate the following status.
Green LED:
Fully charged
Button
Blue LED:
Medium charged
Red LED:
Low power
3. Battery charging
Please connect the device including attached backup battery to an USB port in order to charge the battery. Otherwise you can connect the backup battery separately via USB cable to charge it as shown on the picture below. If you are in possession of the USB power adapter, you can use this instead.
Note: a) If the device is not used frequently, it is suggested to charge the battery once within six month to extend the life time of the battery. b) The backup battery has automatic protection against overcharging and short circuit. The red LED light keeps flashing when the battery is charged and the green LED light is on when the battery is fully charged. (The battery can be charged for 500 times.) c) If you are going to charge the device by the additional USB power adapter, please turn the power switch to OFF, otherwise the unit will try to make up a USB data connection.
32
13. Specifications & Parameters
Optics 170° view angle, 6m -
∞ fixed focus, f/2.8 aperture (high performance in low light), 1/3
”
HD CMOS sensor, pixel size
2,2
μ m, glass lens
Pixel
Battery
8 MP CMOS Sensor
(3200x2400)
1000mAh Lithium Ion
Backup Battery : 1100mAh
Power Consumption 500mA/ 3.7V (max)
Video Recording
Voice Recording
Voice Control
Standby
4h (max)
7h (max)
200h (max)
Charging
Micro SD Card
Operating
Humidity
Storage
Temperature
3h
64GB SDHC (max)
15-85% RH
-20°C - 60°C
-10°C
– 50°C
Operating
Temperature
File Storage Normal: 30 Minutes/Segment
Loop: 15 Minutes/Segment
Video
Recording
1080P
1080I
960P
720p
720p
WVGA
WVGA
Video Format MOV
Voice Format WAV
Photo
USB Port
Remote control range
Operating
System
Weight
Dimension
(WxDxH)
Note:
Specifications are subject to change with upgrade and update.
1920×1080P@30fps
1920× 1080I@60fps
1280×960P@30fps
1280×720P@60fps
1280×720P@30fps
848×480P@120fps
848×480P@60fps
3MP, 5MP, 8MP
USB 2.0
15m
MS Windows XP/ Vista/ 7, MAC OS,
Linux
91g without TFT screen
117g incl. TFT screen
60mm x 41mm x 42mm w/o. TFT
60mm x 51mm x 42mm incl. TFT
33
14. Appendix
1. Instructions for the waterproof casing
The waterproof casing shall be installed precisely. Please take care on following items during operation. a) Do not disassemble and re-fix the sealing ring, keys and lens cover by yourself. Otherwise the sealing of the waterproof casing may be affected. b) Do not take the casing into environments of corrosive gas such as strong acid or alkali and keep it away from chemicals and other corrosives. c) Do not expose the waterproof casing in to high (above 50°C) or low (-10°C) temperatures for long period of time to avoid casing deformation. d) Do not expose the casing to direct sunlight for a long time to avoid damages of the water tightness. e) Before using the casing, it's recommended to check whether the seal rings are in good condition, whether there are foreign objects at the sealing joints, whether the casing is well sealed and tightly fixed. f) After the usage in water, please clean and flush the casing by fresh water and then use a dry cloth to wipe the surface and put the device in a dry and ventilated place.
34
2. Instructions for using the double-sided foam sticker
a) Please choose a suitable curved surface or flat surface to make sure the double-sided foam sticker can be fixed properly. b) Please make sure the surface is clean and smooth before affixing the double-sided foam sticker. c) Under low temperature (under 20°C), it is suggested to heat up the surface (maybe use a hairdryer or something else) before sticking.
3. General Tips
a) The surface of the camcorder might get warm up after a long working time. b) If the camcorder will not be used for a long time, it
’s advised to take out battery and charge it every six months to keep it in a good condition. c) The use of the digital zoom may slightly reduce the image quality.
15. Copyrights
All rights reserved. No part of this manual may be reproduced, or transmitted in any form or by any means, whether by electronically or mechanically, without the express written permission from the copyright holder.
35
16. Warranty
What your warranty does not cover:
1. Acts of nature, such as fire, static discharge.
2. Damage from unauthorized repair, alteration or accident.
3. Damage from misuse or neglect.
4. A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes.
5. Loss of customer’s software, firmware, information, or memory data.
36
37

Public link updated
The public link to your chat has been updated.
Advertisement
Related
