Hyundai R200W-7A Owner Manual
Hyundai R200W-7A is a wheeled excavator designed for maximum power, performance, and reliability. It features a spacious cab with excellent visibility, low noise design, and a comfortable operator environment. The advanced CAPO system optimizes engine and pump power, while the self-diagnosis system monitors and displays any malfunctions. The Cummins QSB6.7 engine meets Tier III emission regulations and provides increased power and improved fuel efficiency. Reinforced components, such as the bucket, bucket linkage, and lower frame, ensure durability and resistance to wear and impact.
Advertisement
Advertisement
R200W-7A_new_en 10-01-2008 10:33 Pagina 1
NEW 7A SERIES
WHEELED EXCAVATOR Applied Tier III Engine
I Photo may include optional equipment.
R200W-7A_new_en 10-01-2008 10:33 Pagina 2
Robex 200 W-7A
Built for Maximum Power,
Performance and Reliability.
A new chapter in construction equipment has now begun.
Making the dream a reality.
I Photo may include optional equipment.
R200W-7A_new_en 10-01-2008 10:33 Pagina 3
HYUNDAI CONSTRUCTION EQUIPMENT 02 /
03
R200W-7A_new_en 10-01-2008 10:33 Pagina 4
Robex 200 W-7A
Operator’s Comfort is Our Main Concern.
Wide Cab Exceeds Industry Standards.
Technology in Cab Design
Visibility
. Even more visibility than before, for safer, more efficient operation.
Excellent Ventilation
. Ventilation has been improved by the addition of a larger fresh air intake system and by providing additional air flow throughout the cab.
. Sliding front and side windows provide improved ventilation.
. A large sunroof offers upward visibility and additional ventilation.
Comfortable Operator Environment
. The control levers and seat can be adjusted to provide maximum operator comfort.
. The seat is fully adjustable for optimum operating position, reducing operator fatigue.
. Console boxes slide forward and backward for improved accessibility.
. The proportional pressure controls reduce unnecessary exertion while ensuring precise operation.
. Large windows allow excellent visibility in all directions.
Low noise design
. The Robex new 7A series is designed with low operation noise in mind.
. Hyundai engineering made efforts to keep interior and exterior noise levels to a minimum.
. The cab's noise levels have been additionally reduced by improving the door seals for the cab and engine compartments.
. An insulated diesel engine compartment with sound-damping material also reduces noise.
1
2 3
1
Wide, Comfortable Operating Space
2
Steel Cover Sunroof
3 Dial Type Engine Speed Switch and / Key Switch
Radio CD Control
R200W-7A_new_en 10-01-2008 10:33 Pagina 5
HYUNDAI CONSTRUCTION EQUIPMENT 04 /
05
R200W-7A_new_en 10-01-2008 10:33 Pagina 6
Robex 200 W-7A
Improved Intelligent Display
Instrument Panel is installed in front of
RH console box.
It is easy to check all critical systems with easy-to-read indicators.
Operating Environment
Minimization of Shock and Vibration through a Cab Mounting System
The application of the Viscous Mounting System to the cabin support provides the operator with a smoother ride. The operator work efficiency will increase as the shock and noise level in the cabin decreases.
Storage box and Cup Holder
An additional storage box and cup holder are located behind the operator’s seat so to keep food and beverages cool or hot.
Wide Cab with Excellent Visibility
The cab is roomy and ergonomically designed with low noise level and a good visibility. A full view front window and large rear and side windows provide excellent visibility in all directions.
Wide, Comfortable Operating Space
All the controls are designed and positioned according to the latest ergonomic research.
Reinforced pillars have also been added for greater cab rigidity.
Adjustable Steering Column
3 0
60mm
R200W-7A_new_en 10-01-2008 10:33 Pagina 7
Maximum Protection
Highly Sensitive Joystick and Easy Entrance
New joystick grips for precise control have been equipped with multiple switches.
Left
Right
• Power boost
• One touch deceleration
• Optional (2)
• Horn
• Optional (3)
Easy-to-Reach Control
Panels
Switches and other essential controls are located near the operator.
This helps to keep operator movements to a minimum, enhancing control with less operator’s fatigue.
The better working conditions in a pleasant environment
Rear Emergency Exit
Window
Rear Exit Window is designed to provide an easy exit in emergency cases.
Raise-up Wiper and
Cabin Lights
Raise-up wiper installed to enhance a better front view.
Cabin Lights enhance safety by brightly lighting the surroundings in dark environments. (optional)
쐉
씈
씉
씊
씋
씌
씍
씎
�
�
쐅
쐈
�
�
�
�
�
�
�
Switch panel(R.H)
Horn button
Option button(breaker operation)
Remote radio control
Cluster
Hour meter
Accel pedal
Brake pedal
Multi function switch(R.H)
Steering
Switch panel(Front)
Multi function switch(L.H)
Safety lever
Joystick control lever
Power Max. button
One touch decel button
Dozer blade lever
Air conditioner and heater controller
Fully adjustable suspension seat
HYUNDAI CONSTRUCTION EQUIPMENT 06 /
07
R200W-7A_new_en 10-01-2008 10:33 Pagina 8
Automatic Engine
Overheat Prevention
If the engine coolant temperature gets too high, the CPU controller lowers the engine speed and cools the engine.
Anti Restart System
The new system protects the starter from re-starting during engine operation, even if the operator accidentally turns the start key again.
Power boost control System
When the power boost system is activated, digging power increases about 10%.
It is especially useful when extra power is temporarily needed, for instance, when digging hard earth and rock or if the bucket teeth are stopped by a stubborn tree root.
Automatic
Warming-up System
After the engine is started, if the engine coolant temperature is low, the CPU controller increases the engine speed and automatically increases the pump flow rate so to warm up the engine more effectively.
Advanced Hydraulic System
ADVANCED CAPO SYSTEM
NEW MODE CONTROL SYSTEM
2
3
1
11
2
POWER MODE
H mode: High power
S mode: Standard power
WORK MODE
: Heavy duty work
: General work
: Breaker
3 USER MODE
M mode: Maximum Power
U mode: Memorizing Operator’s Preferable Power Setting
The advanced CAPO (Computer
Aided Power Optimization) system maintains engine and mutual pump power at optimum levels. Mode selections are designed for various work loads, maintaining high performance while reducing fuel consumption.
Features such as auto deceleration and power boost are included in the system. The system monitors engine speed, coolant temperature, and hydraulic oil temperature.
Contained within the system are self diagnostic capabilities which are displayed by error codes on the cluster.
Auto Deceleration System
When remote-control valves are in neutral position more than
4 seconds, the CPU controller instructs the accelerator actuator to reduce engine speed to
1,000 rpm. This decreases fuel consumption and reduces cab noise levels.
Max. Flow Cut-off System
For precise control and finishing work, the Max.
Flow Cut-off System reduces pump flow, thus allowing smooth operation.
Self Diagnosis System
The CPU controller diagnoses problems in the
CAPO system caused by electric and hydraulic malfunctions and displays them on the LCD monitor of the cluster through error codes. This controller has the capacity to identify 48 distinct types of errors. The information from this device, such as engine rpm, main pump delivery pressure, battery voltage, hyd. temperature, and the state of all types of electric switches, provides the operator with an exact condition of the machine. This instrument makes it easier to troubleshoot the machine in case of failure.
One Touch Deceleration System
When the one touch deceleration switch is pressed, the CPU controller controls the accelerator actuator to reduce engine speed to
850 rpm. Once this switch is pressed again, the engine speed recovers to its preset RPM.
Pump Flow Control System
In neutral position: Pump flow is reduced to a minimum to eliminate power loss.
In operation: Maximum pump flow is delivered to the actuator to increase the speed. With movement of the control lever, pump flow is automatically adjusted and the actuator speed can be proportionally controlled.
Boom & Arm Holding System
The holding valves in the main control valve prevent the boom & arm from dropping over an extended period in neutral position.
Arm Flow Regeneration System
Arm flow regeneration valve provides smooth arm-in operation without cylinder cavitation.
Hydraulic Damper in Travel Pedal
Improved travel controllability & feeling during movement of the machine by use of shock reducing material.
R200W-7A_new_en 10-01-2008 10:33 Pagina 9
CUMMINS
QSB6.7 Engine
The six cylinder 4 cycle Turbo
Charged Engine with Charged
Air Cooling, Has High Power output, Reliability, economical, and low emission. This engine meets Tier III emissions regulations.
The Definition of Progress
The Quantum System B Series 6.7-liter engine combines full-authority electronic controls with the reliable performance.
The electronics with the QSB6.7 have been proven with our high-horsepower productsworking in the harshest, most demanding environments-search as dusty, non-stop mining operations while meeting emissions regulations worldwide.
The QSB6.7 features 24 valve designed with centered injectors and symmetrical piston bowl.
The combination of improved airflow and evenly dispersed fuel results in increased power, improved transient reponse and reduced fuel consumption.
Increased Higher Performance
Reinforced Bucket and Bucket Linkage
To prevent excessive wear of pins and bushes, sealed joints have been applied. Bucket link design incorporates high durability and anti wear characteristics. Additional reinforcement plates on cutting edge section are welded. Thicker steel and an additional lateral plate are put in place to reinforce the bucket.
Strong and Stable Lower Frame
Reinforced box-section frame is all welded, lowstress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground and working on wet sites through high tensile strength steel panels, with protection cover for transmission.
Powerful and Precise Swing Control
Improved shock absorbing characteristics make stopping swing movement a precise and smooth action.
Large Toolbox & Safe Footholds
Anti-slip footholds and wide toolbox improved safety and convenience.
HYUNDAI CONSTRUCTION EQUIPMENT 08 /
09
R200W-7A_new_en 10-01-2008 10:33 Pagina 10
Robex 200 W-7A
Full open doors and the use of one master key system provide easy access during servicing.
Reliability & Serviceability
Side Cover with Left & Right Swing Open Type
Easy access to vital components gives unrestricted view of components allowing easy maintenance and repair.
Easy to maintain engine components
A cooling and preheating system are provided for optimum and immediate operation, guaranteeing longer life for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility.
Centralized Electric Control
Box and Easy Change Air
Cleaner Assembly
Electric control box and air cleaner are centralized in one and the same compartment for easy service.
Highly efficient Hydraulic Pump
Pump output capacity has been increased.
Large tool box for extra storage
R200W-7A_new_en 10-01-2008 10:33 Pagina 11
Durability of structure proven through FEM (Finite
Element Method) analysis and long term durability test.
I Photo may include optional equipment.
HYUNDAI CONSTRUCTION EQUIPMENT 10 /
11
R200W-7A_new_en 10-01-2008 10:33 Pagina 12
S
pecifications
Engine
Model
Type
Rated flywheel horse power
SAE
DIN
J1995 (gross)
J1349 (net)
6271/1 (gross)
6271/1 (net)
Max. torque
Bore x stroke
Piston
Batteries
Starting motor
Alternator
Cummins QSB6.7
Water cooled, 4 cycle Diesel,
6-Cylinders in line, direct injection, turbocharged, charge air cooled and low emission
122 kW (164 HP) / 1,900 rpm
114 kW (153 HP) / 1,900 rpm
122 kW (166 PS) / 1,900 rpm
114 kW (155 PS) / 1,900 rpm
669 Nm (484 lbf.ft) / 1,400 rpm
107 x 124 mm (4.21” x 4.88”)
6,700 cc (409 cu in)
2 x 12 V x 100 AH
24 V - 4.5 kW
24 V - 50 A
Hydraulic system
Main pump
Type
Max. flow
Two variable displacement piston pumps
2 x 222 l/min (58.1 US gpm / 48.4 UKgpm)
Sub-pump for pilot circuit Gear pump
Cross-sensing and fuel saving pump system
Hydraulic motors
Travel
Swing
Relief valve setting
Implement circuits
Travel
Power boost
(boom, arm, bucket)
Swing circuit
Pilot circuit
Service valve
Hydraulic cylinders
No. of cylinderbore x rod x stroke
Two speed axial piston motor with brake valve
Axial piston motor with automatic brake
32,4 MPa (4,690 psi)
35,3 MPa (5,120 psi)
35,3 MPa (5,120 psi)
23,5 MPa (3,410 psi)
3,5 MPa (570 psi)
Installed
Boom : 2-120 x 85 x 1,290 mm (4.7” x 3.3” x 50.8”)
Arm : 1-140 x 100 x 1,510 mm (5.5” x 3.9” x 59.4”)
Bucket : 1-125 x 85 x 1,055 mm (4.9” x 3.3” x 41.5”)
Blade : 2-120 x 85 x 226 mm (4.7” x 3.3” x 8.9”)
Outrigger : 2-130 x 80 x 427 mm (5.1” x 3.1” x 16.8”)
Drives & Brakes
Drive method
Drive motor
Max. drawbar pull
Max. travel speed(high) / (low)
Gradeability
Parking brake
Fully hydrostatic type
Two speed axial piston motor
108 kN (23,800 lbf)
33 km/hr (20.5 mph) / 8.5 km/hr (5.3 mph)
31.5° (61%)
Multi wet disc
Axles & Wheels
Full floating front axles supported by center pin for oscillation.
It can be locked by oscillation lock cylinders.
Rear axle is fixed on the lower chassis
Tires : 10.00-20-14PR, Dual (tube type),
Option : 10.00-20, Dual (solid type)
Swing system
Swing motor
Swing reduction
Swing bearing lubrication
Swing brake
Swing speed
Axial piston motor
2-stage planetary
Grease-bathed
Automatic, spring applied hydraulic released
11 rpm
Steering System
Hydraulically actuated, orbitrol type steering system actuates on front wheels through the steering cylinders.
Min. turning radius 6,690 mm (21’ 11”)
Control
Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation.
Pilot control
Engine throttle
External lights
Two joysticks with one safety lever
(LH): Swing and arm, (RH): Boom and bucket(ISO)
Electric, Dial type
Two lights mounted on the boom and two under the cabin
Coolant & Lubricant capacity
(refilling)
Fuel tank
Engine coolant
Engine oil
Swing device
Axle (Front/Rear)
Hydraulic system(including tank)
Hydraulic tank
Transmission liter
3 1 0 .
0
3 5 .
0
5
16.0/16.0
270.0
1 8 0 .
0
3 .
8
US gal
8 1 .
9
9 .
2
6.3
1 .
3
4.2/4.2
71.3
4 7 .
6
1 .
0
UK gal
6 8 .
2
7 .
7
5 .
3
1 .
1
3.5/3.5
59.4
3 9 .
6
0 .
8
Undercarriage
Reinforced box-section frame is all-welded, low-stress. Rear dozer blade and outrigger are available. A bolt-on design. Front outrigger lug is welded-on.
Dozer blade
Outrigger
A very useful addition for leveling and back filling or clean-up work. Can be mounted on the rear.
Indicated for max. operation stability when digging and lifting. Can be mounted on the rear.
Operating weight (approximate)
Operating weight, including 5.65 m (18’ 6”) boom, 2.90 m (9’ 6”) arm, SAE heaped 0.80 m 3 (1.05 yd 3 ) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment.
Major component weight
Upperstructure
Counterweight
Boom (with arm cylinder)
8,950 kg (19,730 lb)
3,400 kg ( 7,500 lb)
1,480 kg ( 3,260 lb)
Operating weight
Undercarriage
Front - outrigger+Rear-blade
Four outrigger
Standard equipment
Operating Weight kg (lb)
20,500 (45,200)
20,600 (45,400)
R200W-7A_new_en 10-01-2008 10:33 Pagina 13
B
ackhoe attachment
Buckets
0.51 (0.67)
SAE heaped m 3 (yd 3 )
Capacity m 3 (yd 3 )
SAE heaped CECE heaped
0.51 (0.67)
0.80 (1.05)
0.87 (1.14)
0.92 (1.20)
1.10 (1.44)
1.20 (1.57)
1.34 (1.75)
0.74 (0.97)
0.90 (1.18)
1.05 (1.37)
0.87 (1.14)
0.75 (0.98)
: Standard backhoe bucket
: Heavy duty bucket
0.45 (0.59)
0.70 (0.92)
0.75 (0.98)
0.80 (1.05)
0.96 (1.26)
1.00 (1.31)
1.15 (1.50)
0.65 (0.85)
0.80 (1.05)
0.92 (1.20)
0.75 (0.98)
0.65 (0.85)
0.80 (1.05)
0.87 (1.14)
0.92 (1.20)
1.10 (1.44)
1.20 (1.57)
1.34 (1.75)
Width mm (in)
Without side cutters
700 (27.6)
1,000 ( 3 9.4)
1,090 (42.9)
1,150 (45.3)
1,320 (52.0)
1,400 (55.1)
1,550 (61.0)
985 (38.8)
1,070 (42.1)
1,290 (50.8)
1,140 (44.9)
1,790 (70.5)
: Rock bucket-Heavy
: Slope finishing bucket
With side cutters
820 (32.3)
1,120 (44.1)
1,210 (47.6)
1,270 (50.0)
1,440 (56.7)
1,520 (59.8)
1,670 (65.7)
-
-
-
-
-
0.74 (0.97)
0.90 (1.18)
1.05 (1.37)
0.87 (1.14)
Weight kg (lb)
Boom
Arm
Recommendation mm (ft.in)
2,000
(6 ’ 7 ” )
5,650 (18 ’ 6 ” )
2,400
(7 ’ 10 ” )
570 (1,260)
700 (1,540)
740 (1,630)
770 (1,700)
830 (1,830)
850 (1,870)
920 (2,030)
770 (1,700)
810 (1,790)
890 (1,960)
900 (1,980)
880 (1,940)
: Applicable for materials with density of 2,000 kg/m 3
: Applicable for materials with density of 1,600 kg/m 3
(3,370 lb/yd 3 ) or less
(2,700 lb/yd 3 ) or less
: Applicable for materials with density of 1,100 kg/m 3 (1,850 lb/yd 3 ) or less
0.75 (0.98)
2,900
(9’ 6”)
-
-
-
Arms
Boom and arms are of all-welded, low-stress, full-box section design. 5,650 mm (18’ 6”) mono boom and 2,000 mm (6’ 7”); 2,400 mm (7’ 10”) and 2,900 mm (9’ 6”) arms are available. Buckets are all-welded, high-strength steel implements.
2,000 mm (6’ 7”)
Digging force
Arm
Bucket digging force
Arm crowd force
Length
Weight
I
I
S
S
AE
S
AE
S
O
O mm(ft.in) kg(lb) kN kgf lbf kN kgf lbf kN kgf lbf kN kgf lbf
Note: Arm weight including bucket cylinder and linkage.
2,000 (6
’
7
”
)
860 (1,890)
133.4 [145.5]
13,600 [14,840]
29,980 [32,710]
152.0 [165.8]
15,500 [16,910]
34,170 [37,280]
135.3 [147.6]
13,800 [15,050]
30,420 [33,190]
142.2 [155.1]
14,500 [15,820]
31,970 [34,880]
2,400 mm (7’ 10”)
2,400 (7
’
10
”
)
950 (2,090)
133.4 [145.5]
13,600 [14,840]
29,980 [32,710]
152.0 [165.8]
15,500 [16,910]
34,170 [37,280]
112.8 [123.1]
11,500 [12,550]
25,350 [27,650]
117.7 [128.4]
12,000 [13,090]
26,460 [28,870]
2,900 mm (9 ’ 6 ” )
2,900 (9’ 6”)
990 (2,180)
1 33 .4 [145.5]
1 3 ,600 [14,840]
29,980 [ 3 2,710]
152.0 [165.8]
15,500 [16,910]
3 4,170 [ 3 7,280]
97.1 [105.9]
9,900 [10,800]
21,8 3 0 [2 3 ,810]
101.0 [110.2]
10, 3 00 [11,240]
22,710 [24,770]
Standard arm
Remark
[ ]:
Power Boost
HYUNDAI CONSTRUCTION EQUIPMENT 12 /
13
R200W-7A_new_en 10-01-2008 10:33 Pagina 14
D
imensions & Working ranges
Dimensions
P
A
D,D'
200 w
-7A
A
B
C
D
D’
E
H
I
F
G
J
K
L
M
Wheel base
Tread
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cap
Min. ground clearance
Overall width of lower structure
Ground clearance of blade up
Depth of blade down
Height of blade
Width of blade
Ground clearance of outrigger up
Depth of outrigger down
Overall width of outrigger
Working ranges
A
A'
F mm (ft in)
2,800(9’ 2”)
1,874(6’ 2”)
1,305(4’ 3”)
2,800(9’ 2”)
2,765(9’ 1”)
2,530(8’ 4”)
3,180(10’ 5”)
345(1’ 2”)
2,490(8’ 2”)
445(1’ 6”)
125(4.9”)
610(2’ 0”)
2,490(8’ 2”)
1,220(4’ 0”)
120(4.7”)
3,770(12’ 4”)
200w-
7A
E
200 w
-7A
N
B
H
M
Boom length
Arm length
N
O
P
Q
Shipping length of boom
Shipping height of boom
Traveling length of boom
Traveling height of boom
Standard Equipment
2,000
(6’ 7”)
9,610
(31’ 6”)
3,360
(11’ 10”)
9,620
(31’ 7”)
3,540
(11’ 7”)
5,650 (18’ 6”)
2,400
(7’ 10”)
9,510
(31’ 2”)
3,250
(10’ 8”)
9,540
(31’ 4”)
3,540
(11’ 7”) mm (ft in)
2,900
(9’ 6”)
9,490
( 3 1’ 2”)
3 ,100
(10’ 2”)
9,520
( 3 1’ 3 ”)
3 ,410
(11’ 2”)
Boom length
Arm length
A
A ’
B
Max. digging reach
Max. digging reach on ground
Max. digging depth
B ’
C
D
Max. digging depth (8' level)
Max. vertical wall digging depth
Max. digging height
E
Max. dumping height
F Min. swing radius
Standard Equipment
2,000
(6’ 7”)
9,110
(6’ 7”)
8,870
(29’ 1”)
5,480
(18’ 0”)
5,240
(17’ 2”)
4,970
(16’ 4”)
9,500
(31’ 2”)
6,670
(21’ 11”)
3,700
(12’ 2”)
5,650 (18’ 6”)
2,400
(7’ 10”)
9,480
(31’ 1”)
9,260
(30’ 5”)
5,880
(19’ 3”)
5,670
(18’ 7”)
5,440
(17’ 10”)
9,730
(31’ 11”)
6,900
(22’ 8”)
3,620
(11’ 11”) mm (ft in)
2,900
(9’ 6”)
9,900
(32’ 6”)
9,690
(31’ 9”)
6, 3 80
(20’ 11”)
6,210
(20’ 4”)
5,810
(19’ 1”)
9,870
(32’ 5”)
7,050
(23’ 2”)
3 ,540
(11’ 7”)
R200W-7A_new_en 10-01-2008 10:50 Pagina 15
L
ifting Capacities
Lifting capacities
Rating over-front
• Boom : 5.65 m (18’ 6”) • Arm : 2.00 m (6’ 7”) • Bucket : 0.80 m 3 (1.05 yd 3 ) SAE heaped • With 4 outrigger down
Load radius
Load point height m (ft)
3 .
0 m ( 1 0 .
0 f t ) 4.5 m(15.0 ft) 6 .
0 m ( 2 0 .
0 f t ) 7 .
5 m ( 2 5 .
0 f t )
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*8260
*18210
*13240
*29190
*11640
*25660
*8260
*18210
*13240
*29190
*11640
*25660
*5650
*12460
*7340
*16180
*8700
*19180
*9260
*20410
*9110
*20080
*8210
*18100
*5650
*12460
*7340
*16180
*8700
*19180
8680
19140
8680
19140
*8210
*18100
*4230
*9330
*4710
*10380
*5450
*12020
*6180
*13620
*6620
*14590
*6630
*14620
*4230
*9330
*4710
*10380
*5450
*12020
5580
12300
5440
11990
5420
11950
*4650
*10250
*4980
*10980
4020
8860
3920
8640
Rating over-side or 360 degree
*4370
*9630
*4570
*10080
*4710
*10380
*4620
*10190
*3810
*8400
*3890
*8580
*4020
*8860
*4190
*9240
At max. reach
Capacity
*3810
*8400
*3890
*8580
3370
7430
3150
6940
3140
6920
3350
7390
3920
8640
*4620
*10190
Reach m
(ft)
6.85
(22.5)
7.89
(25.9)
8.48
(27.8)
8.73
(28.6)
8.67
(28.4)
8.30
(27.2)
7.57
(24.8)
6.30
(20.7)
• Boom : 5.65 m (18’ 6”) • Arm : 2.00 m (6’ 7”) • Bucket : 0.80 m 3 (1.05 yd 3 ) SAE heaped • With front outrigger and rear dozer blade down
Load radius
Load point height m (ft)
3 .
0 m ( 1 0 .
0 f t ) 4.5 m(15.0 ft) 6 .
0 m ( 2 0 .
0 f t ) 7 .
5 m ( 2 5 .
0 f t )
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line kg lb kg lb kg lb kg lb kg lb kg lb
*8320
*18340
*8320
*18340
*5680
*12520
*7370
*16250
*8720
*19220
*9260
*20410
*5680
*12520
*7370
*16250
7060
15560
6880
15170
*4260
*9390
*4730
*10430
*5480
*12080
*6190
*13650
*6630
*14620
NOTES
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft kg lb kg lb
*13190
*29080
*11570
*25510
*13190
*29080
*11570
*25510
*9100
*20060
*8170
*18010
6880
15170
7020
15480
*6620
*14590
1. Lifting capacity is based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
*4260
*9390
*4730
*10430
4760
10490
4540
10010
4400
9700
4380
9660
*4670
*10300
*4990
*11000
3300
7280
3200
7050
*3830
*8440
*3910
*8620
*4030
*8880
*4190
*9240
*4380
*9660
*4560
*10050
*4700
*10360
*3830
*8440
3230
7120
2770
6110
2570
5670
2550
5620
2730
6020
3200
7050
*4580
*10100
4390
9680
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
8.48
(27.8)
8.73
(28.6)
8.67
(28.4)
8.30
(27.2)
7.57
(24.8)
Reach m
(ft)
6.85
(22.5)
7.89
(25.9)
6.30
(20.7)
HYUNDAI CONSTRUCTION EQUIPMENT 14 /
15
R200W-7A_new_en 10-01-2008 10:33 Pagina 16
L
ifting Capacities
Lifting capacities
Rating over-front Rating over-side or 360 degree
• Boom : 5.65 m (18’ 6”) • Arm : 2.40 m (7’ 10”) • Bucket : 0.80 m 3 (1.05 yd 3 ) SAE heaped • With 4 outrigger down
Load point height m (ft)
1 .
5 m ( 5 .
0 f t ) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6 .
0 m ( 2 0 .
0 f t ) 7 .
5 m ( 2 5 .
0 f t )
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*5090
*11220
*6790
*14970
*5090
*11220
*6790
*14970
*3830
*8440
*4350
*9590
*5130
*11310
*3830
*8440
*4350
*9590
*5130
*11310
*8290
*18280
*8290
*18280
*5920
*13050
*9300
*20500
*9300
*20500
*9080
*20020
8630
19030
*6460
*14240
*10060
*22180
*10060
*22180
*13750
*30310
*13750
*30310
*9140
*20150
8580
18920
*6610
*14570
*14300
*31530
*14300
*31530
*12340
*27210
*12340
*27210
*8490
*18720
*9540
*21030
*9540
*21030
*6550
*14440
*8490
*18720
*6120
*13490
*6550
*14440
*4050
*8930
*4390
*9680
5580
12300
*4790
*10560
5410
11930
*5070
*11180
5350
11790
5420
11950
*4050
*8930
4020
8860
3900
8600
3810
8400
*4090
*9020
*4290
*9460
*4460
*9830
*4500
*9920
At max. reach
Capacity Reach m
(ft)
*3520
*7760
*3520
*7760
7.34
(24.1)
*3610
*7960
3570
7870
8.31
(27.3)
*3740
*8250
*3900
*8600
3110
6860
2910
6420
8.87
(29.1)
9.10
(29.9)
2900
6390
9.05
(29.7)
3070
6770
3530
7780
*4500
*9920
8.70
(28.5)
8.00
(26.2)
6.84
(22.4)
• Boom : 5.65 m (18’ 6”) • Arm : 2.40 m (7’ 10”) • Bucket : 0.80 m 3 (1.05 yd 3 ) SAE heaped • With front outrigger and rear dozer blade down
Load point height m (ft)
1 .
5 m ( 5 .
0 f t ) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6 .
0 m ( 2 0 .
0 f t ) 7 .
5 m ( 2 5 .
0 f t )
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
NOTES
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*10060
*22180
*14300
*31530
*10060
*22180
*14300
*31530
*9300
*20500
*13750
*30310
*12340
*27210
*9540
*21030
*9300
*20500
*13750
*30310
*12340
*27210
*9450
*21030
*5090
*11220
*6790
*14970
*8290
*18280
*9080
*20020
*9140
*20150
*8490
*18720
*6550
*14440
1. Lifting capacity is based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
*5090
*11220
*6790
*14970
7080
15610
6830
15060
6790
14970
*6550
*14440
*3830
*8440
*4350
*9590
*5130
*11310
*5920
*13050
*6460
*14240
*6610
*14570
6890
15190
*6120
*13490
*3830
*8440
*4350
*9590
4780
10540
4530
9990
4370
9630
4310
9500
4380
9660
*4050
*8930
*4390
*9680
*4790
*10560
*5070
*11180
3410
7520
3290
7250
3170
6990
3090
6810
*3520
*7760
*3610
*7960
*3740
*8250
*3900
*8600
*4090
*9020
*4290
*9460
*4460
*9830
*4500
*9920
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
*3520
*7760
2940
6480
2550
5620
2370
5220
2350
5180
2490
5490
2880
6350
3790
8360
Reach m
(ft)
7.34
(24.1)
8.31
(27.3)
8.87
(29.1)
9.10
(29.9)
9.05
(29.7)
8.70
(28.5)
8.00
(26.2)
6.84
(22.4)
R200W-7A_new_en 10-01-2008 10:50 Pagina 17
Lifting capacities
Rating over-front Rating over-side or 360 degree
• Boom : 5.65 m (18’ 6”) • Arm : 2.90 m (9’ 6”) • Bucket : 0.80 m 3 (1.05 yd 3 ) SAE heaped • With 4 outrigger down
Load point height m (ft)
1 .
5 m ( 5 .
0 f t ) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6 .
0 m ( 2 0 .
0 f t ) 7 .
5 m ( 2 5 .
0 f t )
9.0 m
30 ft
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*9190
*20260
*12400
*27340
*9190
*20260
*12400
*27340
*10160
*22400
*8440
*18610
*9800
*21610
*12890
*28420
*10160
*22400
*8440
*18610
*9800
*21610
*12890
*28420
*13070
*28810
*10830
*23880
*13070
*28810
*10830
*23880
*6150
*13560
*7810
*17220
*8830
*19470
*9140
*20150
*8760
*19310
*7410
*16340
*6150
*13560
*7810
*17220
8640
19050
8520
18780
8570
18890
*7410
*16340
*3370
*7430
*3920
*8640
*4750
*10470
*5610
*12370
*6260
*13800
*6560
*14460
*6340
*13980
*3370
*7430
*3920
*8640
*4750
*10470
5610
12370
5400
11900
5300
11680
*2400
*5290
*3690
*8140
*4090
*9020
*4550
*10030
*4920
*10850
*5050
*11130
5320
11730
*2400
*5290
*3690
*8140
4050
8930
3900
8600
3790
8360
3740
8250
*3430
*7560
*3600
*7940
*3790
*8360
*3990
*8800
*3120
*6880
*3180
*7010
*3290
*7250
At max. reach
Capacity Reach m
(ft)
*3120
*6880
*3180
*7010
3240
7140
6.47
(21.2)
7.92
(26.0)
8.81
(28.9)
*4200
*9260
2850
6280
2680
5910
2650
5840
2790
6150
3150
6940
9.34
(30.6)
9.56
(31.4)
9.51
(31.2)
9.18
(30.1)
8.53
(28.0)
*4360
*9610
3960
8730
7.46
(24.5)
• Boom : 5.65 m (18’ 6”) • Arm : 2.90 m (9’ 6”) • Bucket : 0.80 m 3 (1.05 yd 3 ) SAE heaped • With front outrigger and rear dozer blade down
Load point height m (ft)
1 .
5 m ( 5 .
0 f t ) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6 .
0 m ( 2 0 .
0 f t ) 7 .
5 m ( 2 5 .
0 f t )
At max. reach
Capacity Reach m
(ft)
9.0 m
30 ft kg lb
*3130
*6900
*3130
*6900
6.42
(21.1)
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft kg lb kg lb kg lb
*3370
*7430
*3920
*8640
*3370
*7430
*3920
*8640
*2290
*5050
*3700
*8160
*2290
*5050
3460
7630
*3200
*7050
*3310
*7300
*3450
*7610
3.0 m
10.0 ft
1.5 m
5.0 ft kg lb kg lb
*10070
*22200
*8690
*19160
*10070
*22200
*8690
*19160
*6130
*13510
*7800
*17200
*6130
*13510
7180
15830
6850
15100
*4750
*10470
*5610
*12370
*4750
*10470
4560
10050
*4100
*9040
*4560
*10050
3320
7320
3180
7010
*3610
*7960
*3800
*8380
Ground Line kg lb
*9950
*21940
*9950
*21940
*8830
*19470
*6270
*13820
4360
9610
*4930
*10870
3070
6770
*4010
*8840
-1.5 m
-5.0 ft kg lb
*9250
*20390
*9250
*20390
*13040
*28750
*13040
*28750
*9150
*20170
6740
14860
*6560
*14460
4270
9410
*5050
*11130
3030
6680
*4230
*9330
2580
5690
NOTES
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb
*12490
*27540
*12490
*27540
*13090
*28860
*10820
*23850
*13090
*28860
*10820
*23850
*8770
*19330
*7400
*16310
1. Lifting capacity is based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
6780
14950
7000
15430
*6340
*13980
4290
9460
*4390
*9680
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
3260
7190
2180
4810
2160
4760
2270
5000
*3200
*7050
2680
5910
2340
5160
8.49
(27.9)
7.42
(24.3)
7.88
(25.9)
8.78
(28.8)
9.30
(30.5)
9.53
(31.3)
9.48
(31.1)
9.15
(30.0)
HYUNDAI CONSTRUCTION EQUIPMENT 16 /
17
R200W-7A_new_en 10-01-2008 10:33 Pagina 18
N
otes
R200W-7A_new_en 10-01-2008 10:33 Pagina 19
HYUNDAI CONSTRUCTION EQUIPMENT 18 /
19
R200W-7A_new_en 10-01-2008 10:34 Pagina 20
Robex 200 W-7A
Standard Equipment
ISO standard cab
•
All-weather steel cab with all-around visibility
•
•
•
•
Safety glass windows
Rise-up type windshield wiper
Sliding fold-in front window
Sliding side window
•
•
•
Lockable door
Hot & cool box
Accessory box & Ash-tray
Computer Aided Power Optimization
(New CAPO) system
•
•
2-power mode, 3-work mode, 2-user mode
Auto deceleration & one touch
•
• deceleration system
Auto warm up system
Auto overheat prevention system
Air-conditioner (5,000 kcal/hr; 20,000 BTU/hr)
FATC (Full Automatic Temperature Control)
Self diagnostic system
Centralized monitoring
•
•
LCD display
Engine speed
Clock & Error code
Gauges
•
Fuel level gauge
Engine coolant temperature gauge
Hyd. oil temperature gauge
Warning
Fuel level
Check Engine & CPU
Engine oil pressure
Engine coolant temperature
•
Hyd. oil temperature
Low battery
Air cleaner clogging
Indicator
Power max.
Preheat & Engine warming-up
One touch decel
Removable clean out screen for oil cooler
Door and cab locks, one key
Two outside rearview mirrors
Fully adjustable suspension seat with seat belt
Slidable joystick, pilot-operated
Automatic swing brake
Removable reservoir tank
Water separator & Fuel pre-filter, fuel line
Boom holding system
Arm holding system
Counterweight (3,400 kg; 7,500 lb)
Mono boom (5.65 m; 18’ 8”)
Arm (2.9 m; 9’ 6”)
Safety lock valve for boom cylinder with overload warning device
Single acting piping kit (breaker, etc)
Double acting piping kit (cramshell, etc)
Am/Fm radio and CD
• Radio remote switch
Console box tilting system (LH.)
Three front working light
Electric horn
Batteries (2 x 12 V x 100 AH)
Battery master switch
Starting Aid (air grid heater) cold weather
Standard bucket (0.80 m 3 ; 1.05 yd 3 )
Rear - blade (610 mm x 2,490 mm)
Tires - dual (10.00 - 20 - 14PR)
Travel alarm
Fuel filler pump (36 l/min; 9.5 USgpm)
Optional Equipment
Heater (7,500 kcal/hr; 30,000 BTU/hr) & Defroster
Sun visor for cabin inside
Beacon lamp
Safety lock valve for arm cylinder
Accumulator, work equipment lowering
12 volt power supply (DC-DC converter)
Electric. transducer
Various optional Arms
•
Short arm (2.0 m; 6’ 7”)
• Semi long arm (2.4 m; 7’ 10”)
Various optional Buckets (SAE heaped)
•
•
Narrow bucket (0.51 m 3 ; 0.67 yd 3 )
Light duty bucket (0.87 m 3 ; 1.14 yd 3 )
•
•
•
•
Light duty bucket (0.92 m 3 ; 1.20 yd 3 )
Light duty bucket (1.10 m 3 ; 1.44 yd 3 )
Light duty bucket (1.20 m 3 ; 1.57 yd 3 )
Light duty bucket (1.34 m 3 ; 1.75 yd 3 )
•
•
•
•
•
Heavy duty bucket (0.74 m 3 ; 0.97 yd 3 )
Heavy duty bucket (0.90 m 3 ; 1.18 yd 3 )
Heavy duty bucket (1.05 m 3 ; 1.37 yd 3 )
Slope finishing bucket (0.75 m 3 ; 0.98 yd 3 )
Rock bucket (0.87 m 3 ; 1.14 yd 3 )
Cabin lights
Cabin FOPS/FOG (ISO 10262)
•
FOPS (Falling Object Protective Structure)
• FOG (Falling Object Guard)
Lower frame under cover
Tool kit
Operator suit
Special cowling
• Air vent type side door
Engine emergency control
Undercarriage
• Rear dozer and front outrigger
• Rear and front outrigger
Tiers - dual (10.00 - 20 solid)
Seat
• Adjustable air suspension seat
•
Mechanical suspension seat with heater
• Adjustable air suspension seat with heater
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.
All US measurement rounded off to nearest pounds or inches. Materials and specifications are subject to change without notice.
PLEASE CONTACT
www.hyundai-ce.com
EN - 2007. 07 Rev 0.

Public link updated
The public link to your chat has been updated.
Advertisement