- Computers & electronics
- Telecom & navigation
- Mobile phones
- Motorola
- Mike i410 H76XAH6JR7AN
- User manual
Motorola Mike i410 H76XAH6JR7AN, Mike i410 NNTN7966A User Manual 102 Pages
Motorola Mike i410 H76XAH6JR7AN is the device with a 4-Way Navigation Key for easy menu navigation, a Ready key for one-touch access to essential features, a PTT button with customizable settings, and a dedicated end key for convenience. It has a speakerphone for hands-free use, a built-in media center for entertainment, and a flashlight for added utility.
advertisement
TELUS i410 Mike Phone
User’s Guide
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i410
Model Number: H76XAH6JR7AN
FCC-ID: IHDP56KR1
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
FCC Notice to Users
The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID: IHDP56KR2 on the product label.
Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.
Class B Digital Device
As a personal computer peripheral, this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3).
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Notice to Users
Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
See RSS-GEN 7.1.5.
Motorola, Inc.
Consumer Advocacy Office
600 North US Highway 45
Libertyville, IL 60048 www.hellomoto.com
Note: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement, or warranty service, please contact the Motorola Customer Support Center at:
1-800-453-0920 (United States)
1-877-483-2840 (TTY/TDD United States for hearing impaired)
Certain mobile phone features are dependent on the capabilities and settings of your service provider’s network. Additionally, certain features may not be activated by your service provider, and/or the provider's network settings may limit the feature’s functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this user's guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are the property of their respective owners. Java and all other
Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
© Motorola, Inc., 2009.
Manual Number: NNTN7966A
HELLOMOTO
Introducing your new Motorola i410 phone. Here’s a quick anatomy lesson.
Volume Keys
PTT Button
Speaker
On/Off Key Smart Key
Audio Jack
Micro USB
Connector
Connects charger and accessories.
Left Soft Key
Perform function in lower left display.
Menu Key
From home screen, open main menu.
Talk Key
Make & answer calls.
4-Way Navigation
Key
Ready
10:05pm 10/23
Right Soft Key
Perform function in lower right display.
Web Key
OK Key
End/Power Key
End calls, exit menu system, turns phone on/off.
1
check it out
2
Ready
10:05pm 10/23
2 Customizable r key that can be used to open the
Settings screen
Ready
10:05pm 10/23
3 Press the Navigation Key up, down, left or right to highlight a m enu feature.
1 Press and hold the
Power Key
@ for a few seconds, or until the screen lights up, to turn on your phone.
4 Press the to select.
r
contents
check it out . . . . . . . . . . . . 2 menu map . . . . . . . . . . . . . 5 use and care . . . . . . . . . . . 7 essentials . . . . . . . . . . . . . 8 about this guide . . . . . . 8
SIM card . . . . . . . . . . . . 9 battery . . . . . . . . . . . . . . 9 turn it on & off . . . . . . 13 enable security . . . . . 13 make a phone call . . . 13 answer a phone call . 13 make a private call . . 14 answer a private call 14 store a phone number or private ID. 15 call a stored phone number or private ID. 15 your phone number and Private ID . . . . . . 16 text messages . . . . . . 16 using your handset as a modem . . . . . . . . 21 main attractions . . . . . . 22 media center . . . . . . . 22
PTX features . . . . . . . 23 one touch PTT . . . . . . 30
PT manager . . . . . . . . 30
MMS . . . . . . . . . . . . . . 31
Mike wireless web services . . . . . . . . . . . 46
Bluetooth ® . . . . . . . . 48 basics . . . . . . . . . . . . . . . 52 display . . . . . . . . . . . . 52 text entry . . . . . . . . . . 53 volume . . . . . . . . . . . . 55 navigation key . . . . . . 56 handsfree speaker . . 56 transmitters . . . . . . . . 56 use GPS with map software . . . . . . . . . . . 56 features for the hearing impaired . . . . 57 calls . . . . . . . . . . . . . . . . . 59 recent calls. . . . . . . . . 59 redial . . . . . . . . . . . . . . 60 voice names . . . . . . . . 60 caller ID. . . . . . . . . . . . 61 call forward . . . . . . . . 61 emergency calls . . . . 62 international calls . . . 62 speed dial . . . . . . . . . . 63 turbo dial . . . . . . . . . . . 63 voice mail . . . . . . . . . . 64 net alerts . . . . . . . . . . . 65 customize. . . . . . . . . . . . . 66 ring tones . . . . . . . . . . 66 wallpaper . . . . . . . . . . 67 backlight . . . . . . . . . . . 68 datebook . . . . . . . . . . . 68 hide or show location information . . . . . . . . . 69 contents 3
other features . . . . . . . . . 70 advanced calling . . . . 70 contacts . . . . . . . . . . . 71 datebook . . . . . . . . . . . 72
GPS . . . . . . . . . . . . . . . 73 handsfree . . . . . . . . . . 74 personalize . . . . . . . . . 74 pc applications . . . . . 75
TTY . . . . . . . . . . . . . . . . 75 security . . . . . . . . . . . . 75
Legal and Safety. . . . . . . 77
Safety and General
Information . . . . . . . . . 77
Operational
Precautions . . . . . . . . 78
RF Energy
Interference/
Compatibility. . . . . . . . 78
Caring for the
Environment by
Recycling . . . . . . . . . . 79
Driving Precautions . 80
Operational
Warnings. . . . . . . . . . . 80
Service and Repairs . 82
4 contents
Export Law
Assurances . . . . . . . . 82
Battery Use and Safety . . . . . . . . . 83
Battery Charging. . . . 84
Specific Absorption
Rate. . . . . . . . . . . . . . . 85
AGPS and
Emergency Calls . . . . 86
Motorola Limited
Warranty for the
United States and Canada . . . . . . . . 86
Hearing Aid
Compatibility With
Mobile Phones . . . . . 90
Information From the World Health
Organization . . . . . . . 91
Product Registration 91
Wireless: The New
Recyclable . . . . . . . . . 91
California
Perchlorate Label . . . 92
Patent and
Trademark
Information . . . . . . . . . 92
Software Copyright
Notice . . . . . . . . . . . . . 92
Privacy and Data
Security . . . . . . . . . . . . 92
Smart Practices
While Driving . . . . . . . 93 index. . . . . . . . . . . . . . . . . 95
ma i n menu p
Call Alert
L
Java A pp s
• Java System u
Sett i n g s
• (see next page) t
R i n g Tones
• Vibrate All: On/Off
• Ringer
• Vibrate
• Silent c
GPS
• Position
• Privacy
• Interface
P Call Forward
D
Datebook l
Memo
1
Browser
J
My Info
• My Name
• Line 1
• Line 2
• Private ID
• Group ID
• Carrier IP
• IP1 Address
• IP2 Address
menu map
0
Vo i ceRecord
• [New VoiceRec]
B
Recent Calls j
Med i a Center
K
Shortcuts
• [New Entry]
• 1)Shortcuts
• 2)Cntcs[New Contact]
• 3)Recent Calls
• 4)Contacts
• 5)Datebook
• 6)Messages
• 7)VoiceRecord
• 8)Browser
• 9)Call Forward
A
Contacts
• [New Contact] o
Prof i les
M
Call T i mers
• Last Call
• Phone Reset
• Phone Lifetime
• Prvt/Grp Reset
• Prvt/Grp Life
• Circuit Reset
• Circuit Lifetime
• Kbytes Reset
N
PT Mana g er
• Send Message
• Send Picture
• Send Event
• Send My Info
• Send Contact
• Configure
E
Messa g es
• [Create Mesg]
• [Create Txt Msg]
• [Create MMS Msg]
• Voice Mail
• Inbox
• Drafts
• Outbox
• Net Alert
Q
Sho p
P
Talk Around c
Bluetooth
• Hands Free
• Link to Devices
• Device History
• Setup
• Find Me
This is the standard Main Menu layout.
Your phone’s menu may be a little different.
menu map 5
sett i n g s menu
D i s p lay/Info
• Wallpaper
• Text Size
• Theme
• Home Icons
• Backlight
• Clock
• Menu View
• Large Dialing
• Language
Phone Calls
• Set Line
• Any Key Ans
• Auto Redial
• Call Waiting
• Auto Ans
• Flip Activation
• Minute Beep
• Call Duration
• TTY
• Hearing Aid
• Notifications
• DTMF Dialing
• Prepend
2-Way Rad i o
• Tkgrp Silent
• Tkgrp Area
• One Touch PTT
• Alert Type
• PTT Quick Notes
• On/Off PTT
• Store Rcvd Info
Personal i ze
• Menu Options
• Up Key
• Down Key
• Left Key
• Right Key
• Center Key
• Left Sftkey
• Right Sftkey
• Power Up
Volume
• Line 1
• Line 2
• Messages
• Earpiece
• Speaker
• Keypad
• Java Earpiece
• Java Spkr
• Data
Secur i ty
• Phone Lock
• Keypad Lock
• SIM PIN
• GPS PIN
• Change Passwds
Advanced
• Alert Timeout
• Headset/Spkr
• Connectivity
• Reset Defaults
• Return to Home
• Transmitters
• Phone Only
• Baud Rate
6 menu map
use and care
Use and Care
To care for your Motorola phone, please keep it away from: l i qu i ds of any k i nd
Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture. If it does get wet, don’t try to accelerate drying with the use of an oven or dryer, as this may damage the phone.
extreme heat or cold
Avoid temperatures below 0°C/32°F or above 45°C/113°F .
dust and d i rt
Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials.
clean i n g solut i ons
To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.
m i crowaves
Don’t try to dry your phone in a microwave oven.
the g round
Don’t drop your phone.
7
essentials
Caut i on: Before using the phone for the first time, read the Important Safety and Legal information included in the gray edged pages at the back of this guide.
about this guide
This guide shows how to locate a menu feature as follows:
F i nd i t: / > Settings
This means that, from the home screen:
1 Press the menu button / to open the
Main Menu .
2 Press the navigation key to scroll to
Settings .
3 Press r to select it.
symbols
This means a feature is network/ subscription dependent and may not be available in all areas. Contact your service provider for more information.
This means a feature requires an optional accessory.
8 essentials
SIM card
insert the SIM card
Turn off your phone and remove your battery before you install or remove a SIM card.
Carefully slide the SIM card into your phone, until it lies flat in the SIM card holder.
Warn i n g : To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary.
battery
battery installation
1 Open the micro-USB and headphone jack connector covers. Slide the battery door down until it is released.
essentials 9
2 Remove battery door.
4 Replace the battery door.
3 Insert battery as shown below. Push the battery down until it snaps in place.
5 Close the micro-USB and headphone jack connector covers.
10 essentials
battery charging
New batteries are not fully charged.
See “Battery Use and Safety” on page 83.
charge using the charger
1 Pull out the connector cover, and insert the charger into the accessory connector on your phone as shown.
2 Plug the other end of the charger into the appropriate electrical outlet.
When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one segment of the indicator must be visible to ensure full phone functionality while charging.
charge from your computer
You can partially charge your phone’s battery by connecting a Motorola-approved
USB cable from your phone’s micro-USB port to a high power USB connector on a computer (not a low-power one, such as the
USB connector on your keyboard or bus-powered USB hub). Typically, USB high-power connectors are located directly on your computer.
Note: The phone will be charged at a slower rate than it is charged with the rapid charger.
Your computer must be turned on, and you must have correct software drivers installed on your computer. If the Phone is off when the USB cable is connected between the computer and the phone, the phone will essentials 11
power up in charging mode. This mode allows the phone to charge fastest and quickest.
Note: If the battery is very low, the phone will not turn On, but it will continue to charge at a low rate. The phone will power up in charging mode when the battery has been charged to approximately 5% of its capacity. For faster charging under a very low battery condition, it is recommended to use the rapid charger supplied with the handset.
If the phone is turned on while charging from a computer, it will not fully charge the battery.
In this case, the battery charge will be maintained approximately between 80% and
95% of the battery's capacity. Cables and software drivers are available in Motorola
Original
TM
data kits, sold separately.
T ip : Motorola batteries have circuitry that protects the battery from damage from overcharging. Of course, unplugging the charger from the wall will prevent the battery from overcharging.
battery indicators d The battery is at approximately 100% to 90% capacity when the indicator is blue and displaying three bars.
e The battery is at approximately 65% capacity when the indicator is green and displaying two bars.
f The battery is at approximately 10% capacity when the indicator is yellow and displaying one bar.
g The battery is at approximately 5% capacity when the indicator is red and has a flashing red bar.
h The battery is charging.
12 essentials
turn it on & off
To turn on your phone, press and hold @ for a few seconds or until the display turns on.
To turn off your phone, press and hold @ for two seconds.
Note: If you press @ for more than four seconds, the handset will power “On” on
“Transmitter Off” mode. See “transmitters” on page 56.
enable security
You must enable security the first time you power on you phone or within 10 days of first activation.
1 Press
- under Ok .
2 You are prompted to enable security.
Press under Yes . A series of screens followed by the default home page displays.
3 Press @ to return to the home screen.
make a phone call
Enter a phone number and press ` to make a call or use a voice name. See “voice names” on page 60.
Note: For best call quality avoid covering the antenna with your hand.
To hang up press @ .
answer a phone call
When your phone rings and/or vibrates, you have the following options to answer: essentials 13
1 If you want to answer the call on the handsfree speaker phone, press the speaker key s with the flip closed. To hang up press the smart key ( .
2 If you want to answer the call using the handset, just open the flip and press ` .
To hang up press @ or close the flip.
Note: You must have the Flip Activation feature
On. See “advanced calling” on page 70.
make a private call
With Private calls service, you use your phone as a long-range, digital 2-way radio using oneto-one Private calls or one-to-many group calls.
Your Private ID is the number at which you receive one-to-one Private calls.
Talkgroup numbers are numbers through which you receive one-to-many group calls.
1 4 essentials
To make a private call
1 Enter the Private ID you want to call.
2 Press and hold the PTT button. Begin talking after your phone emits a chirping sound.
3 Release the PTT button to listen.
To end the call press @ .
Note: A Private call ends automatically if there is no activity on the call for a few seconds.
T ip : To let someone know you want to talk to them on a Private call, press under Alert .
answer a private call
1 When your phone emits a chirping sound or vibrates to indicate you are receiving a
Private call, wait for the caller to finish speaking.
2 Press and hold the PTT button and begin talking after your phone emits a chirping sound.
3 Release the PTT button to listen.
To end the call press
under Exit .
store a phone number or private ID
You can store a phone number or Private ID in
Contacts :
1 Press / > Contacts > [New Contact] .
2 Enter a name for the new entry. Each entry’s name can contain up to 20 characters.
3 Select Ringer if you wish to assign a specific ring tone to that phone number.
4 Select a type for the entry ( Mobile , Private ,
Work1 , Work2 , Home , Email , Fax , Pager , Talkgroup ,
SDG , IP or Other ). To store a Private ID, choose Private .
5 Enter the number for the entry and press
-
under Done to save the entry.
T ip : Before saving the entry, you can save more information. You can store E-mail addresses, IP addresses, or Talkgroup IDs.
You can assign each number a speed dial number and voice name. You can also create
Contact entries that are groups of Private IDs called Group IDs and/or SDG lists.
After you have saved the number, the new
Contacts entry is displayed.
call a stored phone number or private ID
Shortcut: From the home screen press
under Contcs or essentials 15
F i nd i t: / > Contacts
1 Scroll to the Contacts entry.
T ip : By pressing the first letter of the name of the Contacts you want, you will be taken to all the contact names starting with the letter you pressed.
2 If the Contacts entry contains more than one number, scroll left or right until the type of the number you want to call is displayed ( Mobile , Private , Work1 , Work2 , Home , etc.).
3 If you choose a phone number, press ` to call the entry.
or
If you choose a Private ID, Talkgroup ID, or
SDG List, press and hold the PTT button to call the number.
T ip : If the Contacts entry you scrolled to contains a Private ID, you can make an instant
16 essentials
Private call to that Private ID by pressing and holding the PTT button, even if the Private ID is not the type of number displayed.
your phone number and
Private ID
F i nd i t: / > My Info
T ip : Want to see your phone number or
Private ID while you’re on a call? Press / >
My Info .
text messages
If your service provider offers text messaging, your phone sends text messages using
Mobile Originated Short Messaging Services
(MOSMS) and receives text messages from other phones that are using MOSMS.
Note: The messaging menus may look slightly different, depending on the messaging setup of your phone.
set it up
Before you begin using text messaging, you may need to set up your signature, service center number, and expiration information.
Shortcut: From the home screen press under Mesg > / > Text Msg Setup .
or
F i nd i t: / > Messages > / > Text Msg Setup
The following options become available: o p t i on
Signature: Enter your signature (up to 11 characters long).
Delivery Rpt: Set this option to On if you want your phone to show you when the message has been delivered.
o p t i on
Srvc Cntr No: Enter the phone number of your service center. If you do not know this number, contact your service provider.
Expire After: This is the amount of time messages you send are saved at the service center if they cannot be delivered.
After this period, they are discarded.
Scroll to select the number of days you want your messages to be saved.
Cleanup: Controls how long messages remain in the Inbox and Outbox before they are deleted. See “cleanup” on page 44.
Quick Notes : Quick notes are short, pre-written text messages that you can create, edit, and send in your text messages. You can store up to 20 quick notes. A quick note may be up to 30 characters long.
You can create a [New Note] or press under
Edit to change the pre-written quick notes.
essentials 17
Press under Done to save the information you entered.
receive a text message
1 To view the message press
-
under Read .
2 To dismiss the message notification press
under Exit .
Note: If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area.
T ip : While reading a text and numeric message that contains a phone number, you can press ` to call that number.
read from the message center
1 From the home screen press
-
under
Mesg > Inbox > Text Inbox.
2 Select the message you want to read or press the number of the message you want to read. If the message fills more than one screen, scroll to read it.
T ip : Scrolling through one message lets you view the next message.
3 To reply to the message, press under
Reply or to see all other choices, including forwarding and deleting the message, calling the sender, or storing the sender’s number in Contacts , press / .
create and send text messages
1 From the home screen press under
Mesg > [Create Mesg] > [Create Txt Msg] .
or
Select Inbox > Text Inbox , or Outbox > Text Outbox , or Drafts > Text Draft .
2 To address the message use the keypad to enter the phone number of the person
18 essentials
you want to send the message to and press r .
or
Press under Browse , and select Recent
Calls , Contacts or Memo to find the number you want.
3 Select Msg and enter the text of the message or to use a quick note press under Browse and scroll to the quick note you want.
4 Press / > Set Send Method and select Text ,
Fax , x400 , Paging , Email , ERMES , or Voice .
5 If you want to send the message, press
under Send or to delete the message without sending it, press under Cancel .
Note: If you want to request confirmation of delivery press / > Delivery Report > On .
use drafts
When you save a message as a draft, it is saved in the drafts folder.
Shortcut: From the home screen press under Mesg > Drafts > Text Draft .
1 Select the draft you want to edit. You also have the choice to create new text messages from this menu.
2 To edit the fields you want to change, follow step 2 through step 5 in “create and send text messages” above.
resend text messages
Shortcut: From the home screen press under Mesg > Outbox > Text Outbox .
1 Scroll to the message you want to resend or press the number of the message you want to resend.
2 Press
-
under Resend .
essentials 19
delete sent text messages
Shortcut: From the home screen press under Mesg > Outbox > Text Outbox .
1 Scroll to the message you want to delete.
2 Press under Delete .
3 Press under Yes to confirm.
delete all unlocked sent messages
Shortcut: From the home screen press under Mesg > Outbox > Text Outbox .
1 Press / > Delete All .
2 Press under Yes to confirm.
go to a website
If a message contains one or more website
URLs, you can go to that website. See “go to a website” on page 40.
manage memory
Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages.
The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some.
The outbox and drafts folder share memory space. Together they can hold 30 messages.
If the outbox and drafts folder memory is full, you cannot send messages or save drafts until you delete some.
To view the amount of memory available in your text inbox:
Shortcut: From the home screen press under Mesg > / > Text Msg Setup > Mem Mtr-Inbox .
To view the amount of memory available in your outbox and drafts folder:
20 essentials
Shortcut: From the home screen press under Mesg > / > Text Msg Setup > Mem Mtr-Other .
using your handset as a modem
Your phone can be connected to a computer via USB for use as a modem. For more specific information on how to setup your phone for use with your computer please visit www.motorola.com/support and look under the FAQ section.
essentials 21
main attractions media center
The media center lets you access pictures and audio recordings stored in your phone’s memory.
The following audio recordings can be accessed through the media center:
• Voice records
• Musical ring tones in the list of ring tones
• Audio recordings saved from MMS messages received
• Audio recordings downloaded to your phone
Items in the media center can be sent in
MMS messages. See “MMS” on page 31.
Pictures in the media center can be sent in
Private calls using Send via PTT.
Audio files supported by the Media Center include:
Format
.au
.midi
.mp3
.wav
Sam p l i n g Rates/B i t Rates
8 KHz/8 kbps
8 KHz, Type 0
8 KHz/192 kbps
8 KHz/64 kbps
Note: Stereo audio files are not supported by the Media Center.
22 main attractions
Image files supported by the Media Center include:
Format
.png
.gif
.jpg
.wbmp
Max. Ima g e S i ze ( i n pi xels)
640 x 480
640 x 480
640 x 480
127 x 127
PTX features
With Push To View features, your phone can send and receive the following items through Private calls with other phones that have this capability:
• Short text messages 1
• Pictures 1
• Datebook events
• My Info
• Contact information
You can choose to send My Info and contact information to any Private ID.
You can choose to send pictures, messages, events to the Private ID you are engaged in a a Private call with, Private IDs on the Recent Calls list, and Private IDs stored in Contacts .
When you make or receive a Private call, your phone automatically determines whether the phone you are engaged in a Private call with is able to receive each of these items. Your phone saves this information for as long as the Private ID is on your Recent Calls list or is saved in your Contacts . Your phone updates the saved information each time you make or receive a call to or from that Private ID.
1. Additional charges may apply.
main attractions 23
You can turn your phone’s ability to send and receive messages, pictures, events on and off.
Note: You cannot send PTT feature items during Talkgroup calls or SDG calls. send messages
The Push to Send Messages feature lets you send short text messages through Private calls.
When you send a message, it appears on the display of the phone you are engaged in the
Private call with. The message won’t be stored in the recent calls list.
begin a message and choose a recipient
You can begin a message during a Private call, from the Contacts list, the Recent Calls list, or from the PT Manager .
2 4 main attractions begin a message during a Private call:
While in a Private call, press / >
Use PTT Feature > Send Message .
begin a message from the Contact or the Recent Calls list
1 From the Contacts or the Recent Calls list, select the entry containing the Private ID you want to send the message to.
2 Press / > Use PTT Feature > Send Message .
begin a message from the PT Manager
The PT Manager lets you select the Private ID you want to send the message to from Contacts or the Recent Calls list.
F i nd i t: / > PT Manager > Send Message
Then select A Contact or A Recent Call to see a list of entries from the Contacts or the Recent Calls list that can receive messages.
create messages
After you have begun a message and chosen a recipient, a screen appears that lets you create the text of the message you want to send. Your message may be up to 400 characters long.
You can choose from a list of ready-made words or short phrases called Quick Notes.
You can use a Quick Note as it is or edit it before you send it. Editing a Quick Note changes the Quick Note for this message only and will not change the Quick Note on the list.
send a completed message
After you have completed your message, press the PTT button to send it.
receive messages
When you receive a message, a message notification appears on the display. To view the message press r .
To dismiss the message press
-
under
Dismiss .
reply to a message
1 View the message.
2 Press under Reply .
3 Create the message and press the PTT button to send it.
send pictures
You can send pictures stored in Media
Center through Private calls. The picture you send appears on the Private call recipient’s display. main attractions 25
If the recipient accepts the picture, their phone saves the picture.
The first time you send a stored picture after turning the phone on, Picture Fees May Apply.
Continue?
appears and you are prompted to respond.
Note: You cannot make or receive Private calls while transmitting or receiving a picture.
send a picture during a call
1 While in a Private call, press
-
under
Picture or press / > Use PTT Feature >
Send Picture .
A list of pictures that can be included in a
Private call appears.
2 Select the picture you want to send.
3 Press the PTT button to send the picture.
4 Wait while the picture is transmitted. The
Private call is temporarily interrupted while a picture is transmitted.
5 When prompted, press the PTT button to resume the Private call. start a call by sending a picture from Media Center
F i nd i t: / > Media Center
1 Select the picture you want to send.
2 Press / > Send Via...
> Send via PTT .
A list of contacts that have Private IDs and are able to receive pictures appears.
3 Select the name of the person you want to send the picture to.
4 Press the PTT button to send the picture.
5 When prompted, press the PTT button to resume the Private call.
26 main attractions
from the PT Manager:
F i nd i t: / > PT Manager > Send Picture
1 Select A Contact , or A Recent Call to see a list of entries that can receive pictures.
2 Select the entry containing the Private ID you want to send the message to.
3 Select the picture you want to send.
4 Press the PTT button to send the picture.
5 Once picture has been sent, when prompted press the PTT button to resume the call.
receive a picture
When someone sends you a picture, your phone emits a tone or vibrates and a message appears asking if you want to accept the picture.
Pictures you receive are saved to your phone’s memory. They are accessible through Media
Center .
When you see a message asking if you want to accept the picture, press Yes to accept or No to decline.
T ip : If you want to stop the transmission before it is finished, press @ .
Note: The first time you accept a stored picture after turning the phone on, Picture Fees
May Apply. Continue?
appears and you are prompted to respond. Press under Yes to accept the picture.
clear a picture from the display
If you want to clear a picture from your phone’s display while still on a call, press
/ > Clear Screen .
The picture will not appear on the display again the next time you receive a call from main attractions 27
person who sent it. This does not delete the picture from Media Center .
send My Info
1 While in a Private Call press / >
Send via PTT , and push the PTT button to send.
or
2 From the home screen press / >
My Info > / > Send via PTT and push the PTT button to send.
set my info sending option
You can control what portion of the information in My Info is sent and whether it is sent automatically in every call or only when you choose to send it.
F i nd i t: / > PT Manager > Configure > PTT My Info >
Info to Send
1 Select or remove the fields you want to send.
2 Press under Done .
The information your phone sends always includes My Name and Private . You may also send
Line 1 , Line 2 , Carrier IP , and Circuit Data depending on your sending options. automatic sending
To control whether you send your information automatically:
F i nd i t: / > PT Manager > Configure > PTT My Info >
Auto Send
1 Select On or Off .
When you make a call in which your information is sent automatically, the name you entered in the My Name field of My Info appears on the display of the recipient’s phone, even if your name and Private ID are not stored in the recipient’s Contacts.
28 main attractions
send contact information
1 While in a Private Call press / >
Use PTT Feature .
2 Select Send Contact and select the contact information you want to send.
3 Push the PTT button to send.
or
1 From the home screen press / >
PT Manager > Send Contact .
2 Enter the Private ID number of the person you want to send the Contact information to or press under Browse .
3 Select from Recent Calls , Contacts , or Memo .
4 Select the contact information you want to send and push the PTT button.
turn PTT features on and off
You can turn your phone’s ability to send and receive messages, pictures, and Datebook events on and off.
You cannot turn your phone’s ability to send and receive My Info and contact information on and off.
F i nd i t: / > PT Manager > Configure
1 Select On/Off PTT .
2 Check or uncheck Messages , Pictures and/or
Events .
main attractions 29
one touch PTT
F i nd i t: / > PT Manager > Configure > One Touch PTT
One Touch PTT sets your phone to do any of the following each time you press the PTT button from the home screen: o p t i on
Off : Nothing happens when you press the
PTT button from the home screen.
Last Call : Call the most recent Private ID or
Group on the recent calls list.
Assigned No.
: Call a Private ID you assign.
Enter the number using your keypad, or press under Search . Select Contacts , Recent
Calls , or Memo .
Note: If you are entering a Talkgroup number, enter # before the number.
PT Manager : Go to PT Manager. See “PT manager” on page 30.
o p t i on
Send Message : Go to the first screen to send a message.
Send Picture : Go to the first screen to send pictures. See “send pictures” on page 25.
Send Event : Go to the first screen to send a
Datebook event.
Send My Info : Go to the first screen to send My
Info. See “send My Info” on page 28.
Send Contact : Go to the first screen to send a contact. See “send contact information” on page 29.
PT manager
The PT Manager lets you quickly access PTT features, and other Private call features, from the main menu.
You can also access the Quick PTT feature and set the One Touch PTT feature.
30 main attractions
F i nd i t: / > PT Manager
1 Select Quick PTT to quickly find a contact that has a Private ID.
or
2 Select Send Message , Send Picture , Send Event , Send
My Info , or Send Contact . After choosing what
PTT item you are sending, select a contact and press the PTT button to send.
or
3 Select Configure to configure your PTT Quick
Notes , PTT My Info , One Touch PTT , or On/Off PTT .
MMS
Multi-Media Messaging Service (MMS) lets you send and receive messages that may include text, pictures and audio recordings. create a message
Shortcut: From the home screen press under Mesg > [Create Mesg] > [Creat MMS Msg] .
or
F i nd i t: / > Messages > [Create Mesg] >
[Creat MMS Msg]
1 Select To and add the phone number or email address or select from Contacts or
Recent Calls and press under Done .
T ip : To remove a phone number or email address from the list of message recipients, scroll to the phone number or email address and press under Remove .
When you are finished addressing the message, press under Back .
To enter or edit the body of the message:
2 Select Mesg and enter text or press under QNotes to select a pre-written quick note. main attractions 31
3 When you have finished entering text, press r .
4 Press under Send .
more message options
To view more message fields in a message you are creating, select .....MORE.....
or press under More .
o p t i on
Subject : Create or edit the subject line.
Attach : Attach a picture, audio file or voice record.
Cc : Send a copy of this message to someone else.
Auto Replies : Allows you to create a list of possible short answers for the recipient to choose when replying to your message.
Priority : Set priority Normal or High .
Report : Set receipt confirmation On Delivery .
32 main attractions o p t i on
Valid Until: Set a date after which attempts to deliver the message end, or press under
No Date .
reply to a message
You can reply to a message while you are viewing it, or while a previously viewed message is highlighted in the message center. You cannot reply to unread messages.
To reply to a message:
1 View the message you want to reply to.
2 To reply to the sender only, press under Reply or if you wish to include all the people copied in the message, press under Reply All .
A list of short phrases appears. Select any of these phrases to add it to your messages or select [Create Reply] .
3 Edit any message fields you want to change.
4 Press under Send . quick notes
When you are filling in the Message and Subject message fields, you can add ready-made words or short phrases called Quick Notes.
After you add these words or phrases, you can edit them as you would any other text.
1 While you are creating a message, scroll to or select Message or Subject .
2 Press under QNotes .
Select the Quick Note you want to insert into the message.
3 Press under Send .
attach a picture, audio and voice recording
You can attach one or more pictures, audio or voice recordings from your phone into the body of the message. You can include text in the body of your message in addition to these items.
While you are filling in the Attach field, press
[New] > Browse Pictures or Browse Audio .
A list of available pictures, audio and voice recordings appears.
Select the picture, audio or voice record you want to attach.
T ip : To view or listen to the item before attaching it, highlight it and press Preview .
Note: You can only attach audio files and pictures if they are not forward locked and if their DRM settings do not prevent you from sending.
main attractions 33
Forward locked items are usually copyright protected, and you cannot share them with anyone, such as in Private calls or by uploading them from your phone.
create a new voice record
You can create a new voice record to send with a message:
1 Press / or press under Attach > [New] .
2 Select Record Voice .
3 Say the message you want to record into the microphone.
4 When you are finished recording, press r
.
5 When you are finished, press under
Done .
The voice record is attached to the message and saved to the list of voice records. remove an attachment
To remove an attachment in a message you are creating:
1 Select Attach .
2 Scroll to the attachment you want to remove.
3 Press / > Unattach . drafts
While you are creating a message, you can save it in the MMS drafts folder before you send it.
You can view, edit, send, or delete saved drafts. save a message in the MMS drafts folder
From the Message center press / > Save .
3 4 main attractions
You can continue to create the message. The version you saved in the MMS drafts folder will not change.
send a draft
Shortcut: From the home screen press under Mesg > Drafts > MMS Drafts .
1 Select the draft you want to send.
2 Press under Send .
edit a draft
Shortcut: From the home screen press under Mesg > Drafts > MMS Drafts .
Select the draft you want to edit and press r .
delete a draft
When you send a draft, it is removed from the
MMS drafts folder.
To delete a message in the MMS drafts folder without sending it, scroll to the message you want to delete and press
-
under Delete and
-
under Yes .
MMS outbox
MMS messages you have sent or tried to send are stored in the MMS Outbox.
forward items from the outbox
Shortcut: From the home screen press
under Mesg > Outbox > MMS Outbox .
1 Scroll to the message you want to forward.
2 Press / > Forward .
3 Edit and send your message.
main attractions 35
resend
If a message was not sent from your handset, you can resend it.
Shortcut: From the home screen press under Mesg > Outbox > MMS Outbox .
1 Scroll to the message you want to resend.
2 Press Resend .
Note: If your message was sent successfully,
Resend will not appear as an option.
check delivery status
If a message was successfully sent and you set the message to give a report confirming delivery, you can check the delivery status:
Shortcut: From the home screen press
under Mesg > Outbox > MMS Outbox .
1 Scroll to the message you want to view.
2 Press / > Delivery Status .
36 main attractions delete a message
1 Scroll to the message you want to delete.
2 Press under Delete .
or
3 Press / > Delete Multiple .
4 Select the message or messages you want to delete.
5 Press under Delete to confirm. receive a message
When you receive an MMS message, a message notification appears on the display.
1 To view the message press r .
2 If the message fills more than one screen, use the navigation key to scroll down and read the remaining text.
message notifications
When you receive a message, your phone notifies you with text on the display, a notification tone or vibration.
You can access the message or dismiss the notification.
If you dismiss the notification, the message is not deleted. It can be accessed through the message center.
If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message or dismiss the alert.
If you are on a call when you receive a message, your phone may sound a notification tone during the call or after you end the call, depending on how you set your notification options.
set notification options
To control whether your phone sounds message notification tones while you are on a phone call:
F i nd i t: / > Settings > Phone Calls > Notifications .
Select from the following options: o p t i on
Receive All : Tones sound during calls for all types of messages.
Msg Mail Only : Tones sound during calls for mail messages; tones for all other types of messages are held until you end calls.
Delay All : Tones for all types of messages are held until you end calls.
Note: Delay All is the default setting.
T ip : To set notification options during a call press / > Call Setup > Notifications .
main attractions 37
embedded objects and attachments
Messages may contain pictures or audio recordings as part of the body of the message or as attachments.
If a message contains pictures or audio recordings in the body of the message, highlight each picture or audio recording to view or play it.
If a message contains a picture or audio recording as an attachment, open the attachment to view the picture or play the audio recording. open attachments
1 View the message.
2 Highlight the attachment you want to open and press r . Attachments appear at the end of a message.
Note: Attachments that are of an unknown type cannot be opened, but they can be deleted.
view received messages from the message center
Shortcut: From the home screen press
under Mesg > Inbox > MMS Inbox .
use auto replies
If the message you are replying to was sent with auto replies, it contains a numbered list of possible replies for you to send. Press the number of the reply you want to send. The reply is sent immediately without further action.
delete unread messages
1 Scroll to the message you want to delete.
2 Press under Delete .
38 main attractions
3 Press under Yes to confirm. forward a message
1 Press / > Forward .
2 Create and send your message.
Embedded objects and attachments are included when you forward a message. lock and unlock messages
Locked messages cannot be deleted until you unlock them.
1 View the message you want to lock or unlock.
2 Press / > Lock Message or / >
Unlock Message . call a number in a message
If a message you receive contains a phone number, Private number, or Talkgroup ID in the From field, the To field, the Cc field, the subject line, or the body of the message, you can call or send a call alert to that number. send a call alert
1 View the message.
2 Highlight the Private number or Talkgroup
ID you want to alert.
3 Press / > Alert .
4 Push the PTT button.
make a group call
1 View the message.
2 Press / .
3 Highlight the Talkgroup ID you want to call.
4 Select Talkgroup .
5 Push the PTT button.
main attractions 39
store message information to contacts
If a message you receive contains a phone number, Private number, Talkgroup ID, or an email address in the From field, the To field, the Cc field, the subject line, or the body of the message, you can store this information to Contacts.
1 View the message.
2 Highlight the number or email address you want to save.
3 Press / > Save Number or / > Save Email .
4 To store the number or email address as a new entry, select [New Contact] .
To store the number or email address to an existing entry, select the entry.
5 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number or email address.
6 Press under Done .
go to a website
If a message contains one or more website
URLs, you can go to that website.
1 View the message.
2 Highlight the website URL you want to go to.
3 Press / > Go To Website .
Note: The entire URL must appear in the message to allow you to open the website. save an embedded picture or audio recording
To save a picture or audio recording that is part of the body of a message you receive:
4 0 main attractions
1 View the message.
2 Highlight the picture or audio recording you want to save.
3 Press / > Save Picture or / > Save Audio .
The item will save in the default storage location.
Note: Some types of pictures and audio recordings can be viewed or played, but not saved. delete an embedded picture or audio recording
To delete a picture or audio recording that is part of the body of a message you receive:
1 View the message.
2 Highlight the picture or audio recording you want to delete.
3 Press / > Delete Picture or / > Delete Audio . save attachments
1 View the message.
2 Highlight the attachment you want to save.
3 Press / > Save Attachment .
Selected items save to the default storage location.
Note: Some types of pictures and audio recordings can be viewed or played, but not saved. You may save pictures and audio recordings from slide shows individually as you view or listen to them.
save a picture
1 View the slide show.
2 When the picture you want to save appears, press / > Save Picture .
main attractions 4 1
save audio
1 View the slide show.
2 Press / > Save Audio .
3 If the slide show contains more than one audio recording, a list of the audio recordings appears. Select the audio recording you want to save. message transmission
After you start to send a message you have created or start to download a message you have been sent, you can still stop the message transmission from being completed.
With the flip closed, press the smart key on the top ( . Opening or closing the flip does not interrupt message transmission.
customize MMS
F i nd i t: / > Messages > / > MMS Setup
4 2 main attractions
This option is available from many contextsensitive menus when you are using MMS.
The MMS Setup menu lets you customize
MMS for your handset with the following options: o p t i on
Friendly Name : Enter text here to create a friendly name. Your friendly name is the name displayed in the From field on other iDEN handsets when they receive messages from you.
Signature : Enter text here to create a signature. Your signature is text that is automatically inserted at the end of all messages you create. You can edit the text before sending the message.
Quick Notes : Lets you create new Quick Notes and edit or delete Quick Notes you have created.
o p t i on
Replies : Lets you create new reply phrases and edit or delete reply phrases you have created.
Cleanup : Controls how long messages remain in the Inbox and Outbox before they are deleted.
Downloads : Controls whether your phone automatically downloads new messages when they arrive, or only after you respond to a prompt or read the message from the
Inbox. Set this option to Automatic if you want your phone to download new messages automatically; set the option to Manual if you want your phone to prompt you before downloading new messages.
Memory Size : Shows the total amount of Used ,
Free , and total Capacity of the phone’s memory.
new quick notes and reply phrases create quick notes
1 From the MMS Setup menu, select Quick
Notes or Replies .
2 Select [New Quicknote] or [New Reply] .
3 Enter text from the keypad. edit quick notes
You can edit only Quick Notes and reply phrases you have created.
1 From the MMS Setup menu, select Quick
Notes or Replies .
2 Select the Quick Note or reply phrase you want to edit.
3 Edit the text. main attractions 4 3
delete only Quick Notes and reply phrases you have created
1 From the MMS Setup menu, select Quick Notes or Replies .
2 Scroll to the Quick Note or reply phrase you want to delete.
3 Press
-
under Delete .
4 Press
-
under Yes to confirm. cleanup
The Cleanup option controls how long messages remain in the MMS Inbox and MMS
Outbox before they are deleted. You set the cleanup option for the Inbox and Outbox separately.
The cleanup option only deletes unlocked read messages from the Inbox, and sent messages from the Outbox for MMS.
F i nd i t: / > Messages > / > MMS Setup >
Cleanup
1 Select Inbox or Outbox .
2 Choose a cleanup option from the following list: o p t i on
Off : Messages are never automatically deleted.
5 Messages : If you have more than 5 messages, messages are deleted in the order they were received, starting with the oldest, until 5 are left.
44 main attractions
o p t i on
10 Messages : If you have more than 10 messages, messages are deleted in the order they were received, starting with the oldest, until 10 are left.
With these options, messages are deleted in the order they were received, starting with the oldest, until the selected number are left.
1 Day : Messages are deleted if they are older than 1 day.
3 Days : Messages are deleted if they are older than 3 days.
With these options, messages are deleted when you exit the message center after setting the option.
F-In F-Out : The earliest message added to the queue will be the first to be deleted (First in/ first out). (MOSMS only) o p t i on
Custom : Lets you create a clean-up option of up to 99 messages or 99 days.
3 Press
-
under Yes to automatically delete messages now or press under No to delete messages later.
delete multiple or all messages
To delete multiple messages, all read and unread unlocked messages from the MMS
Inbox, all messages in the MMS Drafts folder, or all successfully sent messages in the MMS
Outbox:
F i nd i t: / > Messages
1 Select Inbox , Drafts , or Outbox .
2 Press / > MMS Inbox , MMS Drafts , or MMS
Outbox > / > Delete Multiple , and check the messages you want to delete.
main attractions 4 5
or
3 Select Delete All and press under Yes to confirm.
Note: Locked messages cannot be deleted from the Inbox.
Mike wireless web services
Your handset is equipped with a microbrowser that can be used to access
Mike's Wireless Web Services and other upto-the-minute information. You can view specially designed text versions of popular
Internet sites that provide news, sports, weather, entertainment, stock quote sites, and other useful information. access the microbrowser
The first time you use the microbrowser, you will be required to go through a security setup process that takes approximately one to three minutes. Please follow the on-screen prompts to complete the security setup process. This setup process will only occur the first time you use the service.
F i nd i t: / > Browser
1 Once connected, the Homepage (or the last page visited) will be displayed. To access the Home menu page from any other menu in the microbrowser, press
@ .
2 To view additional text while visiting a site, use the navigation key to scroll to read it.
navigate the microbrowser
When you use the microbrowser, some keys on your handset operate differently than
4 6 main attractions
during a normal phone call. These keys are explained below:
@
*
Home key - press to return to the default Home page (the page first seen when you launch the browser). Press and hold for two seconds to exit the browser.
Asterisk/Back key - press to return to the previous page viewed before the current page.
access the browser menu
1 Press and hold / to access the browser menu.
2 Scroll to select the desired option.
3 Press under Ok to initiate the option. o p t i on
Exit Browser - closes the browser and returns you to the idle screen. Use this option when you want to return to the page currently viewed at a later time, without navigating through the entire menu structure again.
Reload - reloads the current Wireless Web page viewed, refreshing the information with the most current from the information provider.
Home - returns you to your default Home page, the first page you see when launching the microbrowser.
Bookmarks - allows you to access bookmarks you have created using the Bookmark option.
main attractions 4 7
o p t i on
Mark Site - identifies sites you would like to visit easily and quickly from your microbrowser.
About Phone.com
- contains information about the version of the Phone.com browser loaded on your handset.
Advanced Options - helps troubleshoot any service issues you may have with your browser.
end the microbrowser session
At any point in the session, press and hold @ for two seconds to exit the microbrowser.
Bluetooth
®
Your phone supports the use of wireless
Bluetooth headsets.
F i nd i t: / > Bluetooth
4 8 main attractions
The Bluetooth connection menu contains an option to search for audio devices.
turn Bluetooth On or Off
You can turn your phone’s Bluetooth feature on or off. While Bluetooth power is on, your phone can communicate with other devices.
F i nd i t: / > Bluetooth > Setup > Power > On
1 Select Name if you wish to assign a name to your handset.
2 Select Find Me Time to determine the amount of time in which your handset can be found by other Bluetooth devices.
T ip : You can turn off Bluetooth if you want to prolong battery life or if you enter an area where Bluetooth is prohibited.
make a Bluetooth connection connect your phone with a Bluetooth headset
F i nd i t: / > Bluetooth > Hands Free > [Find Devices]
1 Follow the instructions on your Bluetooth headset to set it up to be found.
2 Once your Bluetooth headset is set to be found press r on your handset. Your phone will scan the Bluetooth headset until it finds it. Press r when you see the name of the Bluetooth headset on your screen.
3 Your phone requires that you create a bond in order to connect with a Bluetooth headset. Press
-
under Yes when you are prompted to bond with the headset.
4 Enter the Bluetooth pass key.
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
Bluetooth device’s user guide to locate this information.
If a device ships without a Bluetooth PIN, then refer to its user guide to set the PIN on that device. To establish a connection to that device, enter the same PIN for both your phone and the device. For example, if you enter 1234 as the device’s
PIN, then enter 1234 as your phone’s PIN.
5 Press
-
under Ok .
Note: This handset offers a Bluetooth auto pair feature with auto pair compatible
Motorola devices. When bonded via
Bluetooth with a certain device, the pin will not be required.
connect your phone with another device
F i nd i t: / > Bluetooth > Link To Devices main attractions 4 9
1 Select the device you want from the list of found devices on your screen.
2 Create a bond if you are prompted to do so.
T ip : If you have previously connected to a device, the device will be stored on your phone so you can connect with it easily.
use Bluetooth during a call
You can connect with available Bluetooth devices during a call.
Note: If the Handsfree Devices list contains only one device, then your phone will automatically try to connect to that device.
1 While in a call, press / > Use Bluetooth .
2 Press under Yes to power On
Bluetooth.
3 Select the audio device you want to connect to from the list of Handsfree Devices .
50 main attractions send information via Bluetooth
You can use your phone to send Contacts entries, or Datebook events to another
Bluetooth device.
The receiving device must be within 32 feet
(10 meters) of your phone in order to connect with yours.
Note: Files sent or received may be up to 200 kb, depending on your service provider.
send Contacts
Shortcut: From the home screen press under Contcs .
1 Select the contact you want to send.
2 Press / > Send Via...
> Bluetooth .
3 Press
-
under Yes to power On
Bluetooth.
4 Select the device you want to transfer the contact information to.
or
Search for the device by selecting [Find
Devices] .
5 If prompted, bond with the device.
Your phone connects with the device and transfers the contact.
send a Datebook event
F i nd i t: / > Datebook
1 Select the datebook event you want to send.
2 Press / > Send Via...
> Bluetooth .
If the event you select repeats, then you will be prompted to choose whether to send the selected instance of the event or all instances of the event.
To send only the selected instance of the event, select This Event Only .
or
To send all instances of the event, select
Repeat Events .
3 Press
-
under Yes to power On
Bluetooth.
4 Select the device you want to transfer the contact information to.
or
Search for the device by selecting [Find
Devices] .
5 If prompted, bond with the device.
Your phone connects with the device and sends the datebook event.
main attractions 51
basics
See page 1 for a basic phone diagram.
display
The home screen shows when you turn on the phone. To dial a number from the home screen, press number keys and ` .
Note: Your home screen may look different.
Date and
Time
Ready
10:05pm 10/23
status indicators
Status indicators are shown at the top of the home screen:
1. 2. 3. 4.
5. 6. 7.
Ready
10:05pm 10/23
Left
Soft Key Label
Right
Soft Key Label
Soft key labels show the current soft key functions. For soft key
-
locations, see page 1.
52 basics
1 Signal Strength Indicator: Vertical bars show the strength of the network connection. You can’t make or receive calls when 1 or 0 shows.
2 Active Phone Line: 1 indicates phone line 1 is ready to make calls.
3 Speaker Off: Sounds associated with Private calls and group calls are set to come through the earpiece rather than through the speaker.
4 Ringer Off: Your phone is set to not ring.
5 Message Indicator: Shows when you receive a text message.
6 Packet Data: Your handset is ready to transfer packet data or is transferring packet data.
7 Battery Charge Indicator: A fuller battery indicates a greater charge. Recharge the battery when your phone shows Low Battery .
text entry
Some features let you enter text.
Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when text messaging).
change the character input mode:
1 When you see a screen where you can enter text, press / to change the character input mode.
2 Select one of the following options: entry modes
Alpha Press a key several times for each character.
Word Enter words using a predictive text entering system that lets you enter a word with fewer keypresses.
Symbols Enter symbols.
Numeric Enter numbers by pressing the numbers on the keypad.
Languages Lets you select the input language.
basics 53
T ip : When entering text, press and hold
#
to change letter capitalization ( Abc > ABC > abc ).
word mode
Word English Text Input lets you enter text into your phone by pressing keys just once per letter.
Word English Text Input analyzes the letters you enter using an intuitive word database and creates a suitable word. (The word may change as you type.) enter a word using Word Character
Input:
1 Select the Word character input mode.
2 Press the corresponding keys once per letter to enter a word (for example, to enter the word Jeff , press
5 3 3 3
). (If you make a mistake, press
-
under Delete or
* to erase a single character. Press and hold
-
under Delete or
*
to delete an entire entry.)
3 To accept a word and insert a space, press
#
.
alpha mode
enter characters by tapping the keypad:
1 Select the Alpha mode.
2 Press the corresponding keys repeatedly until the desired letter appears. (For example, to enter the word Jeff , press
5 once,
3
two times,
3
three times, and
3
three times again. If you make a mistake, press
-
under Delete to erase a single character. Press and hold
-
under
Delete to erase an entire entry.)
By default, the first letter of an entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next
5 4 basics
space after two seconds or when you enter a character on a different key.
Characters scroll in the following order:
7
8
9
0
#
*
2
3
4
5
6 characters
1
Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ %
£ $ ¥
A B C 2 Á Ã Â À Ç
D E F 3 É Ê È
G H I 4 Í Ì
J K L 5
M N O 6 Ó Õ Ô Ò
P Q R S 7 ß
T U V 8 Ú Ü Û Ù
W X Y Z 9
+ - 0 * / \ [ ] = > < # §
Space
Back
volume
Press the volume keys up or down to:
• turn off an incoming call alert
• change the earpiece volume during calls
• change the ringer volume from the home screen
T ip : You can quickly set your ringer to
Vibrate All by holding the down volume key in the home screen.
basics 55
navigation key
Press the navigation key up, down, left, or right to scroll to items in the display. When you scroll to something, press r .
handsfree speaker
You can use your phone’s hands-free speaker to make calls without holding the phone to your ear.
During a call press the speaker key s to turn the hands-free speaker on.
The hands-free speaker stays on until you press the speaker key or end the call. The next phone call will redirect the audio back to the earpiece.
56 basics
transmitters
Note: Consult airline staff about the use of the Transmitters feature during flight. Turn off your phone whenever instructed to do so by airline staff.
Transmitters turns off your phone’s calling features in situations where wireless phone use is prohibited, but you can use the phone’s other non-calling features when Transmitters turned Off.
F i nd i t: / > u > Advanced > Transmitters > Off
use GPS with map software
Your phone can be connected to a PC, laptop, or PDA via USB for use as a GPS receiver. For more specific information on how to setup your phone for use with your computer please
visit www.motorola.com/support and look under the
FAQ section.
features for the hearing impaired using your phone with a hearing aid
For best results use the following optimization procedures and handset setting. They generally apply as well for users with cochlear implants: optimize your handset position and orientation
While in a phone call slide your phone up and down, then left and right until best microphone coupling is obtained. You also may need to adjust your hearing aid (HA) volume setting .
If your HA has a telecoil, activate its switch, then also rotate the handset as illustrated to align the telecoils.
Note: Some automatically switched hearing aids may need an auxiliary switching magnet.
If you are unsure whether your HA is telecoil equipped or needs an auxiliary magnet, please refer to your HA user guide or contact a hearing aid professional or supplier.
basics 57
Approximate telecoil location is within
6-13 mm of this location.
Off - Shut off
M - Microphone
T - Telecoil
3 Set this option to Off (factory default). This is the setting for non HA users.
Approximate telecoil location is just above the battery.
choose your hearing aid setting
F i nd i t: / > Settings > Phone Calls > Hearing Aid .
1 Set this option to Microphone . Microphone coupling is now optimized. or
2 Set this option to Telecoil . Handset meets
US federal requirements for telecoil coupling sound.
or
58 basics
calls
To make and answer calls, see page 13.
recent calls
The Recent Calls list contains information associated with calls you have made and received and call alerts you have received.
When you send or receive Private calls, the
Recent Call list contains the following PTT items with those calls:
• Messages
• Pictures
• Events
• My Info
• Contacts
The recent calls list displays up to 20 of the most recent calls and call alerts.
F i nd i t: / > Recent Calls
T ip : You can also access the Recent Calls list by pressing the navigation key down.
1 Scroll through the list.
2 Highlight the item you want to view or perform some action on.
3 To view more details of the item press r .
store an item to contacts from recent calls
Phone calls, Private calls, My Info received from other phones, or Contacts entries received from other phones can be stored to the Contacts list from the Recent Calls list.
calls 59
F i nd i t: / > Recent Calls
1 Scroll to or select the item you want to store.
2 Press
-
under Save to store the information as a new entry in the
Contacts list.
or
3 If Save is not one or you options, press
/ > Update Contacts . And select the contact you want to update.
4 Press
-
under Done to save your changes.
redial
To redial your last outgoing phone call, press and hold ` or push the PTT button if it was a private call.
voice names
You can place calls by speaking commands to your phone if you have previously assigned a voice name to your contacts.
assign voice names to contacts
1 Press
-
under Contcs and select [New
Contact] .
2 Assign a name, phone number and select
[Options] .
3 Select Voice Name and follow the prompt to record the voice name.
4 Press
-
under Back and
-
under Done to save the entry.
place a call using voice command
1 From the home screen press and hold the speaker key s
until you are prompted to say the voice name.
The handset will automatically place the call.
60 calls
caller ID
Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps.
To block your phone number from being displayed for a specific outgoing call:
1 Press
* 6 7
..
2 Enter the number you want to call.
3 Press ` .
To permanently block your number, call your service provider’s Customer Care.
call forward
Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently.
F i nd i t: / > Call Forward
1 To forward all calls select All Calls and select
To to enter the phone number you want all your calls forwarded to.
or
2 You can specify a forwarding number for each type of missed call by selecting
Detailed and choosing the following options:
If Busy : When your handset is on a call or transferring data.
If No Answer : When you do not answer on the first 4 rings.
If Unreachable : When your handset is out of coverage or powered off.
calls 61
emergency calls
Your service provider programs one or more emergency phone numbers that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted.
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.
Your phone supports emergency calling.
Emergency phone calls can be made even when your SIM card is blocked or not in your phone.
Dial 911 or your local emergency number to be connected to an emergency response center. If you are on an active call, you must end it before making an emergency call.
62 calls
When you make an emergency call, your phone’s GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. Because of the limitations of this feature, always provide your best knowledge of your location to the emergency response center when you make an emergency call.
Note: Emergency calls cannot be placed while the keypad is locked.
Note: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.
international calls
If your phone service includes international dialing, press and hold 0 to insert your local
international access code (indicated by +).
Then, press the keypad keys to dial the country code and phone number.
You can additionally enable a predefined prefix to the dialing number by using Prepend dialing.
F i nd i t: / > Settings > Phone Calls > Prepend
1 Select Prepend and set it to On .
2 Select Number and add the prefix number of your choice.
When the Prepend feature is set to On , the predefined prefix is inserted to the front of the number that you are dialing.
Except that the number is led by "*", "00",
"011" or the number contains "+".
Note: You can also use Prepend temporarily when the feature is set to Off . For example, enter the phone number from the home screen and press / > Add Prepend . The temporary prepend will be inserted to the number you are dialing.
speed dial
Each phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number.
1 From the home screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call.
2 Press
#
.
3 Press ` .
turbo dial
The first nine entries in your contacts are set for turbo dial. They can be called by pressing and holding the speed dial number
(1 through 9).
calls 63
voice mail
Note: To receive voice mail messages, you must first set up a voice mail account with your service provider.
receive a message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
To check voicemail messages press
-
under
Call .
To dismiss the message notification:
If the flip is closed, press the smart key ( on the top.
If the flip is open, press r , Back , or close the flip.
If the caller leaves a message, this icon 3 appears on the display, reminding you that you have a new message.
advanced voice mail with fax
Mike's Advanced Voice Mail with Fax allows you to receive faxes directly to your handset and store them along with your voice messages until you are ready to print. Follow the voice mail prompts to print the fax to a fax machine. It ensures privacy, convenience and eliminates the need for a separate fax line.
When you subscribe to Mike's
Advanced Voice Mail with Fax, you will receive a fax number from your point of feature activation. If you have not received a fax number, please contact the nearest
TELUS dealer or call TELUS client care.
Please see www.telusmob
i l i ty.com
for more details of TELUS Voice Messaging services.
6 4 calls
fax mail Indicator
Your handset is equipped with a Fax Mail indicator to notify you when you have received a fax through Mike's Advanced Voice
Mail with Fax.
Shortcut: From the home screen press
under Mesg > Fax Mail .
When you receive a new fax, New FaxMail
Message appears on the display.
Your handset will alert you audibly until you press
-
under Call or
-
under Exit .
net alerts
When you receive a Net Alert , a notification appears on the display.
If you dismiss the notification, this icon w appears on the display, reminding you that you have a new message.
calls 65
customize
ring tones
To set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using Send via PTT or Datebook reminders:
Note: Only ring tones stored in your phone’s memory are available in the ring tones list.
Not all audio files can be assigned as ring tones.
F i nd i t: / > Ring Tones
1 Make sure Vibrate All is set to Off .
2 Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound. Silent sets your phone to neither vibrate nor make a sound.
T ip : Highlighting a ring tone lets you hear it.
3 Select the features you want to assign the ring tone to.
4 When you are finished, press Done .
Note: This icon , appears on the display if you set your phone to Silent . This icon 5 appears on the display if you set the phone to
Vibrate All .
set your phone to vibrate
You can set your phone to vibrate instead of making a sound when you receive all phone calls, Private calls, group calls, call alerts,
66 customize
messages notifications, pictures sent using
Send via PTT, and Datebook reminders.
F i nd i t: / > Ring Tones > Vibrate All
1 Set this option to On or Locked .
Setting this option to On lets you turn Vibrate
All off by pressing the up volume control.
Setting this option to Locked requires you to press and hold the up volume control to turn Vibrate All off. The Locked option helps prevent you from accidentally turning
Vibrate All off.
To set Vibrate All to On or Locked using the volume controls: Press the volume controls to turn down the volume as far as possible to set
Vibrate All to On . Continue to hold the down volume control to set Vibrate All to Locked .
To set your phone to vibrate instead of making a sound for some features but not others:
F i nd i t: / > Ring Tones
1 Make sure Vibrate All is set to Off .
2 Select Vibrate from the list of ring tones.
3 Select the features you want to set to make no sound.
4 When you are finished, press
-
under
Done .
wallpaper
Set a photo or picture as a wallpaper
(background) image in your phone’s home screen or throughout all menu screens.
F i nd i t: / > Settings > Display/Info > Wallpaper >
Wallpaper .
To select a wallpaper image scroll through the list of pictures and press r to select the picture of your choice.
Note: You can set the wallpaper to change automatically after a certain period of time by customize 67
turning on the Auto Cycle feature located in the
Wallpaper menu.
backlight
Set the amount of time that the display and java apps. backlights remain on, or turn off the backlight feature to extend battery life.
F i nd i t: / > Settings > Display/Info > Backlight
datebook
F i nd i t: / > Datebook > / > Setup
You can view or change these options: o p t i on
Start View : Sets Datebook to start in day view, week view, or month view when you access Datebook.
o p t i on
Daily Begin : Sets the beginning of your day.
This is the earliest time of day displayed in week view, if you have a 12-hour day view.
Delete After : Sets the amount of time
Datebook waits to delete an event after it occurs.
Time Shift : Lets you shift the times of all
Datebook events. This is useful if you are traveling to a different time zone.
Alert Timeout : Sets the amount of time a tone continues to sound when you receive a
Datebook reminder.
Clock : Controls whether the time and date appear on the home screen; sets time and date format.
68 customize
hide or show location information
Your phone is equipped with a Location feature for use in connection with locationbased services that may be available in the future.
The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except for your local emergency response center.
Note: Turning Location on will allow the network to detect your position using GPS technology, making some applications and services easier to use. Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location without your request or permission. GPS-enhanced 911 is not available in all areas.
set your privacy options
F i nd i t: / > GPS > Privacy
Select Restricted , Unrestricted , or Ask Access .
customize 69
other features
advanced calling
feature call waiting F i nd i t: To accept the second call and put the active call on hold press
-
under Yes .
To accept the second call and end the active call press
` .
Your phone rings with the second call for you to answer.
feature
3-way call Make or receive a phone call and press
/ > 3 Way . Enter the second phone number, press ` and
-
under Join .
T ip : For quick ways to enter the number, press / to see the dialing menu.
You cannot make any other calls after you have joined a
3-way call, even if one party disconnects.
70 other features - advanced calling
feature fl ip act i vat i on any key answer
To make your handset to answer and end calls by opening and closing the flip press / > u >
Phone Calls > Flip Activation .
Select Flip To Ans > On and
Flip to End > On .
To answer phone calls by pressing any key on the keypad press / > u >
Phone Calls > Any Key Ans > On .
contacts
feature edit/delete contact entry
Press
-
under Contacts .
Select a contact and press
/ > Edit . Change the desired content and press
-
under Done .
set ringer ID Press
-
under Contacts .
Select a contact and press
/ > Edit > Ringer . Select desired ringer, press
under Back , and
-
under
Done .
other features - contacts 71
datebook
feature create datebook events see datebook event event reminder
To create a new Datebook event press / > D >
[ New Event] .
To see a calendar event press / > D > use the navigation key to scroll left or right to see the day and up or down to see the events.
When an event reminder occurs press
-
under View .
Press
-
under Back to close the reminder.
feature rece i ve datebook events v i a
PTT
To view the information while still in the Private call press r .
The 5 most recent events received from a Private ID are stored with the that
Private ID on the recent calls list.
To store events to the
Datebook press
-
under
Save while viewing the event you want to store.
72 other features - datebook
GPS
To improve GPS performance:
• Stay in the open,
• Move away from other electrical or electronic devices
• Remain stationary.
feature view approximate location
To see your approximate location press / > GPS >
Position . Scroll to view the entire screen.
To recalculate position press
Rfrsh . This may take several minutes.
feature set GPS privacy options change GPS
PIN
To set the level of privacy for your GPS system press / >
GPS > Privacy .
If your GPS PIN security feature is enabled, enter your
GPS PIN and select the privacy option you want.
Note: Your default GPS PIN is
0000.
To change your GPS PIN press
/ > Settings > Security > Change
Passwds > GPS PIN .
Enter the current GPS PIN and enter the new 4- to 8-digit
GPS PIN. Re-enter the new
4- to 8-digit GPS PIN to confirm.
other features - GPS 73
handsfree
Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you can't concentrate on driving.
Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products feature speakerphone
To activate the speakerphone while driving press and hold the speakerphone key s
.
auto answer To automatically answer calls when connected to a car kit or headset press
/ > Settings > Phone Calls >
Auto Ans . Select the amount of rings before answering.
7 4 other features - handsfree
personalize
feature language backlight time length
To set the language of your menu press / > Settings >
Display/Info > Language .
To select how long the display screen and keypad are backlit press / >
Settings > Display/Info > Backlight .
menu style To show the Main Menu as graphic icons or a text-based list press / > Settings >
Display/Info > Menu View .
clock display To display the clock on your home screen press / >
Settings > Display/Info > Clock >
Display > On .
pc applications
feature other PC a pp l i cat i ons
For a list of complete PC applications visit www.motorola.com/support
TTY
feature turn On TTY feature choose TTY mode
From the home screen press / > Settings >
Phone Calls > TTY > Use TTY > On .
From the home screen press / > Settings >
Phone Calls > TTY > Type .
Select from TTY , VCO or HCO .
feature chan g e the
TTY baud rate chan g e TTY mode dur i n g a call
From the home screen press / > Settings >
Phone Calls > TTY > Baud .
Select 45.45
or 50.00
.
While in the TTY call, press
/ > In Call Setup > TTY > Type .
Select from TTY , VCO or HCO .
security
feature p hone lock To lock the phone press
/ > Settings > Security >
Phone Lock > Lock Now or
Auto Lock .
other features - pc applications 75
feature key p ad lock To lock the keypad press
/ > Settings > Security >
Keypad Lock > Lock Now or
Auto Lock .
enable SIM
PIN chan
PIN g e SIM
Shortcut: To lock the keypad press / > * .
To enable SIM PIN, press
/ > Settings > Security >
SIM PIN > On .
To change the SIM PIN, press / > Settings > Security >
Change Passwds > SIM PIN .
Note: You can make emergency calls on a locked phone (see page 62).
76 other features - security
Legal and Safety
Safety and General Information
This section contains important information on the safe and efficient operation of your mobile device. Read this information before using your integrated multi-service portable radio.*
Exposure to Radio Frequency (RF) Energy
Your mobile device contains a transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.
Your mobile device is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.
Portable Radio Product Operation and EME
Exposure
Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):
• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J.
• American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
• Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition.
*
• International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
• Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
• Australian Communications Authority Radio communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
• ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) “Regulation of the limitation of exposure to
* The information provided in this document supersedes the general safety information in user’s guides published prior to May 1, 2006
Legal and Safety 77
electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz.”
“Attachment to Resolution 303 from July 2, 2002."
Operational Precautions
For optimal mobile device performance, and to be sure that human exposure to RF energy does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions.
Phone Operation
When placing or receiving a phone call, hold your mobile phone as you would a landline telephone. Speak directly into the microphone .
Two-way radio operation
Your radio product has been designed and tested to comply with national and international standards and guidelines regarding human exposure to RF electromagnetic energy, when operated in the two-way mode (at the face, or at the abdomen when using an audio accessory) at usage factors of up to 50% talk/50% listen.
Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).
78 Legal and Safety
When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips .
If you wear the mobile device on your body, always place the mobile device in a Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the mobile device in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode, or if you hang your device from a lanyard around your neck, keep the device at least 2.5 centimeters (1 inch) from your body when transmitting.
Approved Accessories
For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/phoneaccessories.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed or otherwise configured for RF energy compatibility. In some circumstances your mobile device may cause interference with other devices.
Follow Instructions to Avoid Interference
Problems
Turn OFF your mobile device in any location where posted notices instruct you to do so.
In an aircraft, turn off your mobile device whenever instructed to do so by airline staff. If your mobile device offers an airplane mode or similar feature, consult airline staff about using it in flight.
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker or defibrillator, consult your physician before using this mobile device.
Persons with implantable medical devices should observe the following precautions:
• ALWAYS keep the mobile device more than 20 centimeters (8 inches) from the implantable medical device when the phone is turned ON.
• DO NOT carry the mobile device in the breast pocket;
• Use the ear opposite the implantable medical device to minimize the potential for interference.
• Turn OFF the mobile device immediately if you have any reason to suspect that interference is taking place.
Read and follow the directions from the manufacturer of your implantable medical device. If you have any questions about using your mobile device with your implantable medical device, consult your health care provider.
Hearing Aids
Some phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives.
Other Medical Devices and Health Care Facilities
If you use any other personal medical devices, consult your physician or the manufacturer or your device to determine if it is adequately shielded from RF energy. Turn off your radio product when instructed to do so in hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.
Caring for the Environment by
Recycling
This symbol on a Motorola product means the product should not be disposed of with household waste.
Disposal of your Mobile Device and Accessories
Please do not dispose of mobile devices or electrical accessories
(such as chargers, headsets, or batteries) with your household waste. These items should be disposed of in accordance with the national collection and recycling schemes operated by your local or
Legal and Safety 79
regional authority. Alternatively, you may return unwanted mobile devices and electrical accessories to any Motorola Approved
Service Center in your region. Details of Motorola approved national recycling schemes, and further information on Motorola recycling activities can be found at: www.motorola.com/recycling
Disposal of your Mobile Device Packaging and
User’s Guide
Product packaging and user’s guides should only be disposed of in accordance with national collection and recycling requirements.
Please contact your regional authorities for more details.
Driving Precautions
The use of wireless phones while driving may cause distraction.
Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.
Responsible driving practices can be found in the “Smart Practices
While Driving” section (see page 93).
Operational Warnings
Obey all posted signs when using Mobile devices in public areas.
Potentially Explosive Atmospheres
Areas with potentially explosive atmospheres are often but not always posted, and can include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain, dust or metal powders.
When you are in such area, turn off your handset, and do not remove, install, or charge batteries unless it is a radio product type especially qualified for use in such areas as “Intrinsically Safe” (for example, Factory Mutual, CSA, or UL approved). In such areas, sparks can occur and cause an explosion or fire.
Symbol Key
Your battery, charger, or portable radio may contain symbols, defined as follows:
Symbol Definition
Important safety information follows.
Do not dispose of your battery or phone in a fire.
80 Legal and Safety
Symbol Definition
Your battery or phone may require recycling in accordance with local laws.
Contact your local regulatory authorities for more information.
Do not throw your battery or phone in the trash.
Your phone contains an internal lithium ion battery.
Do not let your battery, charger, or phone get wet.
Listening at full volume to music or voice through a headset may damage your hearing.
Batteries and Chargers
Caution: Improper treatment or use of batteries may present a danger of fire, explosion, leakage, or other hazard. For more information, see the “Battery Use and Battery Safety” section in this user’s guide.
Keep Your Mobile Device and Its Accessories
Away from Small Children
These products are not toys and may be hazardous to small children. For example:
• A choking hazard may exist for small, detachable parts.
• Improper use could result in loud sounds, possibly causing hearing injury.
• Improperly handled batteries could overheat and cause a burn.
Glass Parts
Some parts of your mobile device may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service center.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout.
If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your physician before playing video games or enabling a flashing-lights feature (if available) on your mobile device.
Legal and Safety 81
Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired.
Caution About High Volume Usage
Warning: Warning: Exposure to loud noise from any source for extended periods of time may affect your hearing. The louder the volume sound level, the less time is required before your hearing could be affected. To protect your hearing:
• Limit the amount of time you use headsets or headphones at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.
If you experience hearing discomfort, including the sensation of pressure or fullness in your ears, ringing in your ears, or muffled speech, you should stop listening to the device through your headset or headphones and have your hearing checked.
For more information about hearing, see our Web site at www.motorola.com/hearingsafety (in English only).
Repetitive Motion
When you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician.
Service and Repairs
If you have questions or need assistance, we’re here to help.
Go to www.motorola.com/support , where you can select from a number of customer care options. You can also contact the
Motorola Customer Support Center at 1 (800) 453-0920 (United
States), 1 (877) 483-2840 (TTY, TDD United States for hearing impaired).
Export Law Assurances
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
82 Legal and Safety
Battery Use and Safety
• Motorola recommends you always use
Motorola-branded batteries and chargers.
The warranty does not cover damage caused by non-Motorola batteries and/or chargers.
Caution: Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.
Improper battery use, or use of a damaged battery, may result in a fire, explosion, or other hazard.
• Battery usage by children should be supervised.
• Important : Motorola mobile devices are designed to work best with qualified batteries. If you see a message on your display such as Invalid Battery or Unable to Charge , take the following steps:
• Remove the battery and inspect it to confirm it bears a
Motorola “Original Equipment” hologram;
• If there is no hologram, the battery is not a qualified battery;
• If there is a hologram, replace the battery and retry charging it;
• If the message remains, contact a Motorola Authorized
Service Center.
• When storing your battery, keep it in a cool, dry place.
• It is normal over time for battery life to decrease, and for the battery to exhibit shorter runtime between charges or require more frequent or longer charging times.
Important: Handle and store batteries properly to avoid injury or damage.
Most battery issues arise from improper handling of batteries, and particularly from the continued use of damaged batteries.
DON’Ts
• Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.
• Don’t let the phone or battery come in contact with water.
Water can get into the phone’s circuits, leading to corrosion. If the phone and/or battery get wet, have them checked by your carrier or contact Motorola, even if they appear to be working properly.
• Don’t allow the battery to touch metal objects.
If metal objects, such as jewelry, stay in prolonged contact with the battery contact points, the battery could become very hot.
• Don’t place your battery near a heat source.
Excessive heat can damage the phone or the battery. High temperatures can cause the battery to swell, leak, or malfunction. Therefore:
• Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven.
Legal and Safety 83
• Avoid leaving your phone in your car in high temperatures.
DOs
• Do avoid dropping the battery or phone.
Dropping these items, especially on a hard surface, can potentially cause damage.
• Do contact your service provider or Motorola if your phone or battery has been damaged from dropping or high temperatures.
Important: Use Motorola Original products for quality assurance and safeguards. To aid consumers in identifying authentic Motorola batteries from non-original or counterfeit batteries (that may not have adequate safety protection), Motorola provides holograms on its batteries. Consumers should confirm that any battery they purchase has a “Motorola Original” hologram.
Motorola recommends you always use Motorola-branded batteries and chargers.
Motorola mobile devices are designed to work with Motorola batteries. If you see a message on your display such as I nvalid Battery or Unable to Charge , take the following steps:
• Remove the battery and inspect it to confirm that it has a
“Motorola Original” hologram;
• If there is no hologram, the battery is not a Motorola battery;
• If there is a hologram, replace the battery and retry charging it;
8 4 Legal and Safety
• If the message remains, contact a Motorola authorized service center.
Important: Motorola’s warranty does not cover damage to the phone caused by non-Motorola batteries and/or chargers.
Warning: Use of a non-Motorola battery or charger may present a risk of fire, explosion, leakage, or other hazard.
Proper and safe battery disposal and recycling: Proper battery disposal is not only important for safety, it benefits the environment. Consumers may recycle their used batteries in many retail or service provider locations. Additional information on proper disposal and recycling may be found on the Web:
• www.motorola.com/recycling
• www.rbrc.org/call2recycle/ (in English only)
Disposal: Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center or national recycling organizations for more information on how to dispose of batteries.
Warning: Never dispose of batteries in a fire because they may explode.
Battery Charging
Notes for charging your phone’s battery:
• When charging your battery, keep it near room temperature. Never expose batteries to temperatures below 0°C (32°F) or above 45°C (113°F) when charging.
• New batteries are not fully charged.
• New batteries or batteries stored for a long time may take more time to charge.
• Motorola batteries and charging systems have circuitry that protects the battery from damage from overcharging.
Specific Absorption Rate
Your model wireless phone meets the governmental requirements for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed and manufactured to not exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed for the safety of all persons, regardless of age or health, and to account for any variations in measurements.
The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The
SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 watts per kilogram (W/kg), averaged over one gram of tissue. Tests for SAR are conducted using procedures accepted by the FCC and by Industry Canada with the mobile device transmitting at its highest certified power level in all tested frequencies. Although the SAR is determined at the highest certified power level, the actual SAR level of the mobile device while operating can be below the maximum value. This is because the mobile device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output.
Before a mobile device is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry
Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) submitted to the FCC and available for review by Industry Canada.
The highest SAR value for this mobile device when tested for use at the ear is 0.72 W/kg, and when worn on the body, as described in this guide, is 1.03 W/kg. Body-worn measurements can differ, depending upon available accessories and regulatory requirements. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
While there may be differences between the SAR levels of various mobile devices and at various positions, they meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the
SAR value for later products; in all cases, products are designed to be within the guidelines.
Legal and Safety 85
Additional information on SAR can be found on the Cellular
Telecommunications & Internet Association (CTIA) Web site: http://www.phonefacts.net
or the Canadian Wireless Telecommunications Association (CWTA)
Web site: http://www.cwta.ca
AGPS and Emergency Calls
When you make an emergency call, your mobile device can use
Assisted Global Positioning System (AGPS) satellite signals to tell the emergency response center your approximate location.
The AGPS feature has limitations, so always tell the emergency response center your best knowledge of your location. Remain on the phone for as long as the emergency response center instructs you.
AGPS might not work for emergency calls, if your local emergency response center does not process AGPS location information. For details, contact your local authorities.
If your mobile device cannot find strong AGPS satellite signals, the location of the nearest cell tower in contact with your mobile device is automatically provided to the emergency response center.
AGPS Performance Tips
• Go outside and away from underground locations, covered vehicles, structures with metal or concrete roofs, tall buildings, and foliage. Indoor performance might improve if you move closer to windows, but some window sun shielding films can block satellite signals.
• Move away from radios, entertainment equipment, and other electronic devices that might interfere with or block
AGPS satellite signals.
AGPS uses satellites controlled by the U.S. government and subject to changes implemented in accordance with the
Department of Defense AGPS user policy and the Federal Radio
Navigation Plan. These changes might affect AGPS performance.
Motorola Limited Warranty for the
United States and Canada
What Does this Warranty Cover?
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES
AND SOFTWARE PURCHASED IN THE UNITED STATES OR
CANADA
Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets
("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and Motorola software
86 Legal and Safety
contained on CD-Roms or other tangible media and sold for use with these Products ("Software") to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:
Products Covered Length of Coverage
Products as defined above.
One (1) year from the date of purchase by the first consumer purchaser of the product.
Accessories as defined above.
One (1) year from the date of purchase by the first consumer purchaser of the product.
Products or
Accessories that are
Repaired or
Replaced.
Software as defined above. Applies only to physical defects in the media that embodies the copy of the software
(e.g. CD-ROM, or floppy disk).
The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer.
Ninety (90) days from the date of purchase.
What is not covered? (Exclusions)
Normal Wear and Tear . Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.
Ornamental Decorations . Ornamental decorations such as emblems, graphics, rhinestones, jewels, gemstones and their settings, and other decorative elements, are excluded from coverage.
Batteries . Only batteries whose fully charged capacity falls below
80% of their rated capacity and batteries that leak are covered by this limited warranty.
Abuse & Misuse . Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.
Use of Non-Motorola Products and Accessories . Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification . Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software
Legal and Safety 87
changes, or modification in any way by someone other than
Motorola, or its authorized service centers, are excluded from coverage.
Altered Products . Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering;
(c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, antennas, or parts, are excluded from coverage.
Communication Services . Defects, damages, or the failure of
Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products,
Accessories or Software is excluded from coverage.
Software Embodied in Physical Media.
No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.
Software NOT Embodied in Physical Media . Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided "as is" and without warranty.
Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable.
What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products,
Accessories or Software that does not conform to this warranty.
88 Legal and Safety
We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products,
Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
Motorola iDEN Customer Services 1-800-453-0920 or
954-723-4910
TTY-877-483-2840
Or visit us online at http://www.motorola.com/iden
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.
What Other Limitations Are There?
ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS,
ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.
Patent and Software Provisions:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
• That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;
• That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and
• Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by
MOTOROLA.
Legal and Safety 89
MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the
Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall
MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.
Hearing Aid Compatibility With Mobile
Phones
Some Motorola phones are measured for compatibility with hearing aids. If the box for your particular model has “Rated for
Hearing Aids” printed on it, the following explanation applies.
When some mobile phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.
90 Legal and Safety
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.
Information From the World Health
Organization
Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your children’s RF exposure by limiting the length of calls or by using hands-free devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
Further information: http://www.who.int./peh-emf .
Product Registration
Online Product Registration: www.motorola.com/us/productregistration
Product registration is an important step toward enjoying your new
Motorola product. Registering permits us to contact you for product or software updates and allows you to subscribe to updates on new products or special promotions. Registration is not required for warranty coverage.
Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt to confirm warranty status.
Thank you for choosing a Motorola product.
Wireless: The New Recyclable
Your wireless phone can be recycled. Recycling your phone reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and its members encourage consumers to recycle their phones and have taken steps to promote the collection and environmentally sound recycling of end-of-life devices.
As a phone user, you have an important role in ensuring that this device is recycled properly. When it comes time to give this phone up or trade it in for a new one, please remember that the phone, the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at: http://recycling.motorola.young-america.com/ index.html
Legal and Safety 91
California Perchlorate Label
Some mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label:
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate .
There is no special handling required by consumers.
Patent and Trademark Information
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2009 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9
®
Text Input Patent and Trademark Information.
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
All other product names or services mentioned in this manual are the property of their respective trademark owners.
92 Legal and Safety
Software Copyright Notice
Motorola products may include copyrighted Motorola and third party software stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for
Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of
Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.
Privacy and Data Security
Motorola understands that privacy and data security are important to everyone. Because some features of your mobile device may affect your privacy or data security, please follow these recommendations to enhance protection of your information:
• Monitor access— Keep your mobile device with you and do not leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.
• Keep software up to date— If Motorola or a software/application vendor releases a patch or software fix for your mobile device that updates the device’s security, install it as soon as possible.
• Erase before recycling— Delete personal information or data from your mobile device prior to disposing of it or turning it in for recycling. For instructions on how to delete all personal information from your device, please contact your local service provider.
• Understanding AGPS— To provide location information for emergency calls, certain Motorola mobile devices incorporate Assisted Global Positioning System (AGPS) technology. AGPS technology also can be used in non-emergency applications to track and monitor a user’s location—for example, to provide driving directions. Users who prefer not to permit such tracking and monitoring should avoid using such applications.
If you have further questions regarding how the use of your mobile device may impact your privacy or data security, please contact
Motorola at [email protected]
, or contact your service provider.
Smart Practices While Driving
Drive Safe, Call Smart
SM
Check the laws and regulations on the use of phones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas—for example handsfree use only. Go to www.motorola.com/callsmart (in English only) for more information.
Your mobile device lets you communicate by voice and data—almost anywhere, anytime, wherever wireless service is available and safe conditions allow. When driving a car, driving is your first responsibility. If you choose to use your phone while driving, remember the following tips:
• Get to know your Motorola mobile device and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
• When available, use a handsfree device. If possible, add an additional layer of convenience to your phone with one of the many Motorola Original handsfree accessories available today.
• Position your mobile device within easy reach. Be able to access your phone without removing your eyes from the road. If you receive an incoming call at an
Legal and Safety 93
inconvenient time, if possible, let your voice mail answer it for you.
• Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.
• Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility, driving safely.
• Dial sensibly and assess the traffic; if possible, place calls when your car is not moving or before pulling into traffic. If you must make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.
• Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that can divert your attention away from the road.
• Use your mobile device to call for help. Dial 911 or other local emergency number in the case of fire, traffic accident, or medical emergencies (wherever wireless phone service is available).
• Use your mobile device to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in
9 4 Legal and Safety danger, call 911 or other local emergency number
(wherever wireless phone service is available), as you would want others to do for you.
• Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number (wherever wireless phone service is available).
index
A accessories 8, 74 active phone line 52 advanced calling 70
3-way calls 70 alert set 55, 66 turn off 55 answer a call 13 audio formats 22 auto replies 38
B backlight 68, 74 battery 9, 11 battery charging indicators
12 battery indicator 53
Bluetooth connect 49 send information 50 setting your phone 48 turning on or off 48
C call answer 13 end 13, 14 make 13 call forward 61 caller ID 61 calls 59 center key 56 center select key 8 clock 74 combined power/end/home key 13, 14 contacts 71
D datebook 72 receive events via PTT 72 setup 68 dial a phone number 13 dialed calls 59 display 52 drafts 19
E earpiece volume 55 emergency number 62 end a call 13, 14 index 95
F frequently asked questions service and repairs 82
G
GPS 73
GPS enabled emergency calls 62
GPS, see GPS enabled
H handsfree 74 handsfree speaker 56 hearing aid 57
Hearing Aid Compatibility 90 home screen 52
I image formats 23 incoming call message 61 international calls 62, 64
96 index iTAP text entry mode 54
L language 74 low battery message 53
M make a call 13 media center 22 memory text messages 20 message center text messages 18 message indicator 53 messages 74, 75 fax mail indicator 65
MMS 31 modem using your handset as a
21
N navigation key 8, 56 net alerts 65
O one touch PTT 30 optional accessory 8, 74 optional feature 8
P packet data 53
PC applications 75 personalize 74 phone number 16 private calls answer 14 make 14
PT manager 30
Q quick notes create, edit 17, 19
R radio frequency 77 received calls 59 recent calls 59 recycling 91 redial 60 ring style indicator 53 ring style, setting 55 ring tones off 66 setting 66 vibrate 66, 67 ringer volume 55
S safety radio frequency 77
RF energy interference 78 safety information 77 safety tips 93 security 75 send key 13
SIM card 9 change SIM PIN 76 enable SIM PIN 76 soft keys 52 speaker 53, 73 speed dial 63 store your number 16
T tap text entry mode 54 text entry 53 text messages 16, 21 creating 18 deleting 20 drafts 19 memory 20 message center 18 receiving 18 resend messages 19 sending 18 sent messages 20 setting up 17 transmitters 56
TTY calls 75 turn on/off 13
V voice mail receiving 64 setting up 64 voice names 60 voicemail 64 volume 55
W wallpaper 67
WHO information 91 index 97
wireless web 46 microbrowser navigation
46
Y your phone number 16
98 index
advertisement
Key Features
- 4-Way Navigation Key for easy menu navigation
- Ready key for one-touch access to essential features
- PTT button with customizable settings
- Dedicated end key for convenience
- Speakerphone for hands-free use
- Built-in media center for entertainment
- Flashlight for added utility
Frequently Answers and Questions
Can I use my handset as a modem?
Does the phone support Bluetooth?
Related manuals
advertisement
Table of contents
- 6 check it out
- 9 menu map
- 11 use and care
- 12 essentials
- 12 about this guide
- 13 SIM card
- 13 battery
- 17 turn it on & off
- 17 enable security
- 17 make a phone call
- 18 make a private call
- 20 and Private ID
- 20 text messages
- 25 as a modem
- 26 main attractions
- 26 media center
- 27 PTX features
- 34 one touch PTT
- 34 PT manager
- 50 services
- 56 basics
- 56 display
- 57 text entry
- 59 volume
- 60 navigation key
- 60 handsfree speaker
- 60 transmitters
- 60 software
- 61 hearing impaired
- 63 calls
- 63 recent calls
- 64 redial
- 64 voice names
- 65 caller ID
- 65 call forward
- 66 emergency calls
- 66 international calls
- 67 speed dial
- 67 turbo dial
- 68 voice mail
- 69 net alerts
- 70 customize
- 70 ring tones
- 71 wallpaper
- 72 backlight
- 72 datebook
- 73 information
- 74 other features
- 74 advanced calling
- 75 contacts
- 76 datebook
- 78 handsfree
- 78 personalize
- 79 pc applications
- 79 security
- 81 Legal and Safety
- 81 Information
- 82 Precautions
- 82 Compatibility
- 83 Recycling
- 84 Driving Precautions
- 84 Warnings
- 86 Assurances
- 87 and Safety
- 88 Battery Charging
- 90 Emergency Calls
- 90 and Canada
- 94 Mobile Phones
- 95 Organization
- 95 Recyclable
- 96 Perchlorate Label
- 96 Information
- 96 Notice
- 96 Security
- 97 While Driving
- 99 index