Advertisement
Advertisement
TBC-2010
User Guide
High Definition
Digital Terrestrial Receiver
USB PVR-Ready
Common Interface
CONAX CAS 7 Embedded
TOPFIELD
ii
The lightning flash with arrowhead symbol, in an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person.
Precautions
• Read, keep and follow these instructions.
• Heed all warnings.
• Clean only with a dry cloth.
• Do not block any of the ventilation openings.
• Do not install near any heat sources or in direct sunlight as this will impair cooling.
• Do not operate this product near water. Do not place any of the objects filled with liquids, such as vases on this unit.
• Do not try to change the plug or defeat its safety purpose. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• This product is designed for indoor use only.
• Place the digital receiver on a firm and level surface.
• Do not lay any objects such as magazines on this unit.
• Do not overload power outlets. Doing so may result in a risk of fire or electrical shock.
• Never open this unit’s casing under any circumstances, or the warranty will be void.
• Unplug this unit during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit became wet from rain or moisture, does not operate normally, or has been dropped.
• Batteries, including those which contain no heavy metals, may not be disposed with other household wastes.
Please dispose of used batteries in an environmentally sound manner.
Find out the legal regulations which apply in your area.
The exclamation point, in an equilateral triangle, is intended to alert the user to the presence of important operation and maintenance instructions in the literature accompanying the product.
About this user guide
Thank you for purchasing our digital receiver.
Please read this user guide carefully before you use the digital receiver and keep it handy for future reference.
This User Guide covers the model TBC-2010 .
• Illustrations pictured in this manual may not be exactly the same as the actual product.
• The screenshots used in this manual may not be exactly the same as those you see on the actual on-screen displays.
• Designs and specifications of the digital receiver and other accessories are subject to change without any notice in order to introduce new features or improve the functionality of the product.
CONTENTS iii
Contents
Contents iii
1 Introduction 1
1.1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
1.2
Controlling the digital receiver . . . . . . . . . . . . . . . . . .
2
1.2.1
Front panel . . . . . . . . . . . . . . . . . . . . . . . .
2
1.2.2
Remote control . . . . . . . . . . . . . . . . . . . . . .
5
1.3
Subscription card information . . . . . . . . . . . . . . . . . .
7
1.4
Common Interface . . . . . . . . . . . . . . . . . . . . . . . . .
7
2 Setup 9
2.1
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
2.2
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . .
9
2.3
Rear panel connections . . . . . . . . . . . . . . . . . . . . . .
10
2.4
Connecting up your digital receiver . . . . . . . . . . . . . . .
12
2.4.1
Connecting to the antenna . . . . . . . . . . . . . . . .
12
2.4.2
Connecting to your television set . . . . . . . . . . . .
13
2.5
Switching on for the first time . . . . . . . . . . . . . . . . . .
15
3 Service Search 17
3.1
Searching for broadcasting services . . . . . . . . . . . . . . .
17
3.2
Resetting to factory settings . . . . . . . . . . . . . . . . . . .
18
3.3
Resetting to user settings . . . . . . . . . . . . . . . . . . . . .
19
3.4
Clearing the services list . . . . . . . . . . . . . . . . . . . . .
19
iv CONTENTS
4 Preference Settings 20
4.1
Language settings . . . . . . . . . . . . . . . . . . . . . . . . .
20
4.1.1
Menu language . . . . . . . . . . . . . . . . . . . . . .
20
4.1.2
Subtitle language . . . . . . . . . . . . . . . . . . . . .
21
4.1.3
Audio language . . . . . . . . . . . . . . . . . . . . . .
21
4.2
Video and audio settings . . . . . . . . . . . . . . . . . . . . .
21
4.2.1
High definition television . . . . . . . . . . . . . . . .
22
4.2.2
Television aspect ratio . . . . . . . . . . . . . . . . . .
22
4.2.3
Audio mode . . . . . . . . . . . . . . . . . . . . . . . .
24
4.3
Local time setting . . . . . . . . . . . . . . . . . . . . . . . . .
24
4.4
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . .
26
4.5
Options for recording . . . . . . . . . . . . . . . . . . . . . . .
28
4.6
Options for playback . . . . . . . . . . . . . . . . . . . . . . .
29
4.7
Options for on-screen display . . . . . . . . . . . . . . . . . .
30
4.8
Options for standby mode . . . . . . . . . . . . . . . . . . . .
31
5 Every Day Use 32
5.1
Volume control . . . . . . . . . . . . . . . . . . . . . . . . . .
32
5.2
Watching television . . . . . . . . . . . . . . . . . . . . . . . .
32
5.2.1
The services list . . . . . . . . . . . . . . . . . . . . . .
32
5.2.2
The favourite service lists . . . . . . . . . . . . . . . .
33
5.2.3
Viewing programme information . . . . . . . . . . . .
34
5.2.4
Selecting audio tracks . . . . . . . . . . . . . . . . . .
35
5.2.5
Selecting subtitle tracks . . . . . . . . . . . . . . . . .
35
5.2.6
Viewing teletext . . . . . . . . . . . . . . . . . . . . . .
36
5.3
Viewing electronic programme guide . . . . . . . . . . . . . .
36
5.4
Using time-shift . . . . . . . . . . . . . . . . . . . . . . . . . .
37
6 Organising Services 39
6.1
Editing the services list . . . . . . . . . . . . . . . . . . . . . .
39
6.2
Editing the favourite lists . . . . . . . . . . . . . . . . . . . . .
41
6.3
How to use on-screen keyboard . . . . . . . . . . . . . . . . .
42
7 Recording and Playback 44
7.1
Recording a programme . . . . . . . . . . . . . . . . . . . . .
44
7.1.1
Instant recording . . . . . . . . . . . . . . . . . . . . .
45
CONTENTS v
7.1.2
Timer recording . . . . . . . . . . . . . . . . . . . . . .
46
7.1.3
Scheduling recordings using the programme guide . .
49
7.1.4
Recording a pay service programme . . . . . . . . . .
49
7.2
File archive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
7.2.1
To delete a recording . . . . . . . . . . . . . . . . . . .
51
7.2.2
To sort recordings . . . . . . . . . . . . . . . . . . . . .
51
7.2.3
To lock a recording . . . . . . . . . . . . . . . . . . . .
51
7.2.4
To rename a recording . . . . . . . . . . . . . . . . . .
51
7.2.5
To make a new folder . . . . . . . . . . . . . . . . . . .
52
7.2.6
To move a recording to another folder . . . . . . . . .
52
7.3
Playing back a recording . . . . . . . . . . . . . . . . . . . . .
52
7.3.1
To navigate using the progress bar . . . . . . . . . . .
53
7.3.2
To play in slow motion . . . . . . . . . . . . . . . . . .
53
7.3.3
To play in fast motion . . . . . . . . . . . . . . . . . . .
53
7.3.4
To make a bookmark . . . . . . . . . . . . . . . . . . .
54
7.3.5
To play back a recording repeatedly . . . . . . . . . .
54
7.3.6
To play back recordings in sequence . . . . . . . . . .
55
7.3.7
To play back a scrambled recording . . . . . . . . . . .
55
7.4
Copying a recording . . . . . . . . . . . . . . . . . . . . . . .
56
7.5
Playing back a video file . . . . . . . . . . . . . . . . . . . . .
56
7.6
Formatting the hard disk . . . . . . . . . . . . . . . . . . . . .
57
8 Firmware Update 58
8.1
From a memory stick . . . . . . . . . . . . . . . . . . . . . . .
58
Chapter 1
Introduction
The TBC-2010 digital receiver is fully compliant with the international Digital Video Broadcasting (DVB) standard, and thus is able to receive digital broadcasts of that standard. For its operation you need an antenna, which must be installed appropriately.
NOTE
In general we equate a channel with a frequency. However, unlike analogue broadcasts, digital broadcasts are not all assigned to their own frequencies; instead, multiple television broadcasts are transmitted through a single frequency.
The frequency in digital broadcasting is usually called transponder or multiplex. To reduce confusion in this manual, the word service is preferably used than channel as a term to indicate one television or radio broadcast.
1.1
Features
This digital receiver has the following features:
• Can store up to 2 , 000 television and radio services.
1
2 Introduction
• You can edit the services list.
• Can create lists of your favourite services.
• Can view information about the current television or radio programme.
• Has an electronic programme guide that provides an overview of scheduled programmes.
• Time-shift is a special technical feature available on this digital receiver. You can pause a programme you are watching and resume it again at a later time. Then you can quickly go to any part of the current programme by fast forward or rewind search.
• If you have an external hard drive connected to the digital receiver via the USB port, you can record television programmes into it.
• You can play back video files of various formats including DivX.
1.2
Controlling the digital receiver
You can operate the digital receiver with the remote control or the buttons on the front panel.
NOTE
When the digital receiver is off but plugged into a wall socket, we say that it is in standby mode; on the other hand, when it is on, it is in active mode. Even when you are not using the digital receiver, you should keep it plugged into a wall socket to be in standby mode so that it can run timer events at any time.
1.2.1
Front panel
The front panel of the digital receiver has buttons to control the digital receiver, specific lights and a display to indicate its status. The following indicates what they mean.
1.2 Controlling the digital receiver 3 button switches the digital receiver between standby mode and active mode.
light blinks every time you press a button on the remote control.
STANDBY light lights up while the digital receiver is in standby mode.
Front display shows the current time in standby mode, and displays the current service in active mode.
CHANNEL c , a buttons switch to the previous or next service. They are also used to navigate in menus and interactive screens.
There is a USB port on the front panel for firmware update and data transfer. If you have an external hard drive connected to the digital receiver via the USB port, you can record television programmes into it.
If you want to watch pay services, pull the right edge of the front panel to open the flap, then insert your subscription card into the front slot.When you insert the subscription card, the side on which the chip is mounted must face upward.
3
8
21
33
32
27
26
22
23
36
30
6
11
13
20
5
4 Introduction
1.2.2 Remote control
1
14
15
7
5
9
34
35
25
28
29
24
31
19
4
18
16
10
12
2
17
3
.
1
.
.
button switches the digital receiver between standby mode and active mode.
.
2
.
.
is used to set a sleep timer in
10 minute increments.
.
3
.
.
V − , + buttons decrease or increase the volume. They are also used to change values for menu options.
.
4
.
.
mutes the sound. Press again to switch it back on.
.
5
.
.
P − , P + buttons switch to the previous or next service. They are also used to navigate in menus and interactive screens.
.
6
.
.
switches over between the current service and the previously viewed one.
.
.
7
.
Numeric buttons are used to enter a service number for service change or to specify values for menu options.
.
8
.
.
OK displays the services list. See
§ 5.2.1
for more details. It is also used to select a menu item.
.
.
9
.
.
FAV displays the favourite lists.
displays the service information box. It is also used to display more information about a programme.
1.2 Controlling the digital receiver 5
.
is used to select an audio track and a sound mode.
.
is used to select a subtitle track.
.
.
.
.
.
displays teletext.
.
14 V.Format
changes video resolution. See § 4.2.1
for more de-
.
.
15 tails.
A/R changes aspect ratio. See § 4.2.2
for more details.
switches over between television services and radio
.
.
.
services.
.
17 GUIDE displays the electronic programme guide.
.
.
AUX is not used in this model.
.
.
19 SAT is not used in this model.
.
.
MENU displays the main menu. It is also used to return to
.
.
.
.
.
the previous menu from a submenu.
.
.
.
EXIT is used to exit a menu or to hide on-screen information.
.
.
.
.
is used to start recording.
is used to stop playback, to stop recording, or to jump back to live television from time-shifted television.
is used to display the list of recorded programmes that are stored in the external hard drive. See § 7.2
for more details.
.
.
.
resumes normal playback speed, or displays the progress bar for navigation on playback or time-shift. To play a recorded programme, see button
.
.
.
.
pauses live television or playback of a recorded programme.
is used to start reverse playback. Subsequent presses increase the rewind speed.
is used to start fast forward playback. Subsequent presses increase the playback speed.
is used to start slow motion playback. Subsequent presses change the playback speed.
6 Introduction
.
.
.
.
.
.
.
.
.
.
.
is used to jump back to the beginning of the recording on playback.
is used to jump to the end of the recording on playback.
has different functions per menu.
is used to make a bookmark on playback or time-shift.
is used to jump to next bookmark position.
has different functions per menu.
has different functions per menu.
Functions of the colour buttons will be guided on the screen.
NOTE
When using the remote control, point it at the remote sensor on the front panel of the digital receiver.
1.3
Subscription card information
With this digital receiver, you can view pay services scrambled with the CONAX conditional access system.
Probably you have a subscription card. If you would like to view information in detail about your subscription card, select the Conditional
Access menu. There you can also check the messages from the broadcasting operator.
1.4
Common Interface
There are pay TV services available; these are accessible with the use of a Conditional
Access Module (CAM) and a subscription card. A Common Interface (CI) is the slot into which you can insert a CAM. The front of the digital receiver has two common interface slots. To watch a pay service, you should take the following steps:
1.4 Common Interface 7
1. Purchase a CAM and a subscription card for the pay service you want to watch.
2. Insert the subscription card into the CAM.
3. Insert the CAM into a common interface on the front of the digital receiver.
To view the information about the module and subscription card which is inserted into the digital receiver, select the Information > Common Interface menu.
8 Setup
Chapter 2
Setup
2.1
Unpacking
Before going any further, check that you have received the following items with the digital receiver.
• Remote control
• Two batteries for the remote control (AAA 1.5 V)
• One HDMI cable
• A copy of this user guide
NOTE
Accessories may vary according to your local area.
2.2
Safety precautions
Please read carefully the following safety precautions.
• The mains voltage must range between 90 and 250 volts.
Check it before plugging the digital receiver to the wall socket. For the power consumption of the digital receiver, refer to Table 2.1
.
2.3 Rear panel connections 9
• The wall socket should be near the equipment. Do not run an extension lead to the unit.
• The mains plug shall remain readily operable so that it can be removed easily to disconnect the power.
• When placed in a cabinet, make sure there is a minimum space of 10 centimetres around it. For the physical specification of the digital receiver, refer to Table 2.2
.
• Protect the power cord from being walked on or pinched.
If the cord is damaged, do not use the digital receiver and get the cord replaced.
• Refer all servicing to a qualified service technician.
• To maintain proper ventilation, always leave sufficient space around the digital receiver.
Table 2.1: Power specification
Input voltage 90 to 250 V AC, 50/60 Hz
Power consumption 22 W at maximum in active
Under 1 W in passive standby
Table 2.2: Physical specifications
Size
Weight
Operating temperature
260 × 46 × 190 mm
1.2 kg
0 to 45
◦
C
Storage relative humidity 5 to 90 %
2.3
Rear panel connections
The TBC-2010 has the following connections on the back:
10 Setup
Pb Y Pr
Y Pr
Check what connections your television set has in comparison with the digital receiver.
.
1
.
.
ANT IN Terrestrial broadcasting signal input socket
(5V, Max.100mA)
.
.
2
.
ANT OUT Terrestrial broadcasting signal output socket through the ANT IN socket for another digital receiver
.
.
3
.
S/PDIF Digital audio output socket for the audiovideo receiver
.
4
.
.
VCR Audio and video input/output socket for another device such as a video recorder
.
5
.
.
TV Audio and video output socket for the television set
.
6
.
.
Y/Pb/Pr Component video output socket for the television set
(green/blue/red)
.
.
7
.
AUDIO L/R Stereo audio output socket for the television set or the audio-video receiver (white/red)
.
.
8
.
VIDEO Composite video output socket for the television set (yellow)
.
.
9
.
HDMI Audio and video output socket for the high definition television set
2.4 Connecting up your digital receiver 11
Table 2.3: Connectors specifications
HDMI
TV
VCR
High definition video output
Left & right audio output
Digital audio output
CVBS/S-Video/RGB video output
Left & right audio output
CVBS video output
Left & right audio output
CVBS/S-Video/RGB video input for bypass
Left & right audio input for bypass
YPbPr Component video output
VIDEO Composite video (CVBS) output
AUDIO Left & right audio output
S/PDIF Digital audio output
USB 2.0 Host 5 V DC, 500 mA (on the front)
2.4
Connecting up your digital receiver
There are several ways to set up the digital receiver. Set up the digital receiver suitably to your television and other devices.
If you have any problem with your setup or need help, contact your dealer.
2.4.1
Connecting to the antenna
Whatever sort of connection you have between the digital receiver and the television, you need to connect the digital receiver to the antenna so that it can receive digital television broadcasts. Connect the antenna cable to the ANT IN connector.
If you have another digital receiver, you may link it from the ANT OUT connector.
12 Setup
NOTE
ANT OUT may also be linked to your television, VCR, or
DVD recorder to loop an analogue signal.
2.4.2 Connecting to your television set
For all the following connections of the digital receiver, we recommend you to use the first connector to get the best picture quality. If your television does not have a matching connector, then use the next connector in the following order for a better picture quality.
1. HDMI connector ( HDMI )
2. Component connector ( YPbPr )
3. Composite connector ( VIDEO )
You should configure audio and video settings after connecting up the digital receiver. See § 4.2
for a detailed description.
To use the HDMI output
If you have a high definition television set, you should use an HDMI cable for best results. Plug one end of the cable into the HDMI socket on the digital receiver, and plug the other end into the matching socket on your television.
In this case, you do not have to make audio connection because it can output stereo audio or digital audio as well.
To use the Component video output
You need to obtain a Component video cable
(RCA cable) to use the Component video output. Plug one ends of the cable into the Y
(green), Pb (blue) and Pr (red) sockets on the digital receiver, and plug the other ends into the matching sockets on your television.
2.4 Connecting up your digital receiver 13
NOTE
When connecting with the Component video cable, remember to also plug in the additional white and red audio cables from the digital receiver to the back of your television.
To use the Composite video output
You need to obtain a Composite video cable
(RCA cable) to use the Composite video output. Plug one end of the cable into the VIDEO
(yellow) socket on the digital receiver, and plug the other end into the matching socket on your television.
NOTE
You cannot view high definition video by means of the Composite video output.
To make the audio connection
You need to obtain an audio cable (RCA cable) to link the audio connectors. Plug one ends of the cable into the AUDIO L (white) and AUDIO R (red) sockets on the digital receiver, and plug the other ends into the matching sockets on your television or audio-video receiver.
14 Setup
To enjoy Dolby Digital audio, your television or audio-video receiver must be able to decode Dolby Digital audio, and you need to obtain an S/PDIF cable.
Plug one end of the cable into the S/PDIF socket on the digital receiver, and plug the other end into the matching socket on your audio-video receiver.
2.5
Switching on for the first time
Now that you have your digital receiver connected, you should plug it into a wall socket. Ensure that your television set is turned on and on the correct video channel so that you will be able to see the display from the digital receiver.
Before switching on the digital receiver, you should insert batteries into the remote control. Open the battery compartment by removing the lid, and then insert the batteries observing the polarity, which is marked on the base of the battery compartment.
Press the button on the top left corner on the remote control. In a little time, you may see a picture displaying a menu.
If you do not see a picture, try pressing the V.Format
button on the remote control. If after several tries you still get no picture, check that the television is set to the correct input. If the picture is good, you can skip to § 3.1
to search for available television and radio services. Otherwise, you may need to temporarily connect the Composite video connector ( VIDEO ) to your television set so that you can see the menu in order to configure the video settings.
CAUTION
If the digital receiver no longer reacts properly to the remote control commands, the batteries may be flat. Be sure to re-
2.5 Switching on for the first time 15 place only with 1.5 V AAA size batteries, and observe the following precautions.
• Do not mix different types of batteries, or new and old batteries.
• Do not use rechargeable batteries.
• Do not recharge the old batteries.
• In order to avoid any risk of explosion, observe the polarities indicated inside the battery compartment.
• Do not subject to excessive heat such as the sun and fire.
• If you are not using the remote control for a long period of time, remove the batteries. The manufacturer accepts no liability for the damage resulting from leaking batteries.
• Batteries, including those which contain no heavy metals, may not be disposed with other household wastes. Please dispose of used batteries in an environmentally sound manner. Find out the legal regulations which apply in your area.
16 Service Search
Chapter 3
Service Search
After connecting up the digital receiver, you will need to perform a service search.
NOTE
If there is no service stored, you will be not able to access all menus. A is another name for a .
3.1
Searching for broadcasting services
To perform service search, select the Installation > Searching menu. You should see a screen like the left figure. If you have an antenna booster, you should set the Antenna Supply 5V option to
On to supply power to it.
3.2 Resetting to factory settings 17
You should set the Search Mode option to Auto for the first time after connecting up the digital receiver, then the digital receiver will search for all available services.
You may choose to only search for the services of a specific transponder since more than one service are provided via each transponder. Set the Search Mode option to Manual , then select your desired transponder at the Channel option. The number ranges from 5 to 12 (or D to H) in VHF and 21 to 69 in UHF.
To start service search, move down to the Start Search item, and press the button. The digital receiver will start to search for services and display a list of television and radio services as they are found. It is common for no channels to be found until quite late in the process. When the scan is complete, you will see a message telling you how many services have been found. Press the button to save the list.
3.2
Resetting to factory settings
The digital receiver maintains the following data:
• Services list
• Favourite list
• Timer list
• Preference settings
You can reset all data of the digital receiver. Select the Installation > System Recovery > Factory Setting menu, and then you get asked for confirmation. With the choice of Yes , the services list, favourite list and timer list will all be cleared, and preference options will be reset to the manufacturer’s factory settings.
NOTE
A factory reset will not delete any recorded programmes.
However, you have to search services again after a factory reset.
18 Service Search
3.3
Resetting to user settings
You can store your own data including the following:
• Services list
• Favourite lists
• Preference settings
Also you can restore them at any time.
To store your data, select the Installation > System Recovery >
Store System Data menu, then you get asked for confirmation.
If you select Yes , your data will be stored. Whenever you store your data, they are all overwritten. To restore your data, select the Installation > System Recovery > Recover System Data menu, then you get asked for confirmation. With the choice of
Yes , your data will be restored.
3.4
Clearing the services list
If you only want to clear the services list, select Installation >
System Recovery > Reset Service List , then you get asked for confirmation. With the choice of Yes , the services list will be cleared. After this, you have to do service search again.
19
Chapter 4
Preference Settings
4.1
Language settings
You can select the language in which the menu will be displayed. In addition to that, you can select the language of audio track and of subtitle track. Select the Settings > Language menu.
You should see a screen like the left figure.
4.1.1
Menu language
The digital receiver provides menus in several different languages. Set the Menu Language option to your desired language. Once you select a language, the menu will be immediately displayed in the selected language.
20 Preference Settings
4.1.2 Subtitle language
Set the 1st Subtitle Language option and the 2nd Subtitle Language option to your desired languages. When you watch a programme, if the programme has a subtitle track of the language that is specified for the 1st Subtitle Language , it will be displayed. If the first language is not available but the second language is available, the subtitle of the second language will be displayed. If there is no available language, no subtitle will be displayed.
Apart from this setting, you can select a subtitle track with the button. See § 5.2.5
for a detailed description.
4.1.3 Audio language
Set the 1st Audio Language option and the 2nd Audio Language option to your desired languages. When you watch a programme, if the programme has an audio track of the language that is specified for the 1st Audio Language , it will be output. If the first language is not available but the second language is, the audio of the second language will be output.
Apart from this setting, you can select an audio track with the button. See § 5.2.4
for a detailed description.
4.2
Video and audio settings
You have to configure the video and audio settings appropriately for your television set and other devices. Select the Settings >
A/V Output menu. You should see a screen like the left figure.
4.2 Video and audio settings 21
4.2.1 High definition television
The digital receiver supports various video resolutions from
576 to 1080 . To enjoy high definition pictures, set the HD Output option to Component and select a resolution of 720 or more in the Video Format option. In general, a resolution of 720 or more is considered high definition. The higher the resolution is, the better the quality is.
If you set this option to 576I , the digital receiver will present even high definition programmes in resolution of 576. On the contrary, if you set it to 1080I , the digital receiver will present even standard definition programmes in resolution of 1080.
However, if your television set does not support high definition or a certain resolution, you cannot enjoy your high definition quality picture as desired. Therefore, it is recommended to set it to Auto if you have a high definition television. With that setting the digital receiver will present a programme as it is without any resolution conversion. While watching television you can change the resolution with the V.Format
button. Whenever you press it, the video resolution is changed in turn.
NOTE
If your television supports only standard definition, set the
HD Output option to Scart , then the pictures will be displayed in a resolution of 576I . In addition, note that you can view only standard quality videos with the TV SCART output. It ouputs even high definition pictures in CVBS or S-
Video format, and outputs standard definition pictures in
CVBS, RGB, or S-Video format.
4.2.2
Television aspect ratio
If you have a wide-screen television, set the TV Aspect Ratio option to 16:9 .
22 Preference Settings
You can enjoy both wide-screen programmes and normalscreen programmes with your wide-screen television as the above figures show.
To watch normal-screen programmes in full screen like the left figure, set the Display Format option to Full . Normal-screen pictures then will be inflated to fit to the width of the wide screen. Otherwise, to watch them in the original ratio like the right figure, set it to Center . If you have a normal-screen television, set the TV Aspect Ratio option to
4:3 .
You cannot fully enjoy wide-screen programmes with your normal-screen television as the above figures show. The left figure shows a normal picture displayed in the normal screen.
To watch wide-screen programmes in the shape like the centre figure, set the Display Format option to Letter Box . Widescreen pictures then will be reduced to fit to the width of the normal screen. Otherwise, to watch them in the shape like the right figure, set it to Center extract . Then wide-screen pictures will be cut out on the left and right sides equally to fit to the width of the normal screen.
4.3 Local time setting 23
4.2.3 Audio mode
Basically, there are two audio sources as you can find two audio sockets on the back panel of the digital receiver. You can enjoy only one source or both of them in either stereo or mono. Set the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with the button. See § 5.2.4
for a detailed description.
The digital receiver can output two types of digital audio signals via the S/PDIF output. One is an encoded signal, and the other is a decoded signal. If you have the digital receiver linked to your audio-video receiver via the S/PDIF output, you have to set the Dolby Digital option to Off , which means that the digital receiver will output encoded Dolby Digital audio without decoding so that your audio-video receiver can decode it.
Otherwise, set it to On , then the digital receiver will output decoded Dolby Digital audio, scaling it down to two channels.
NOTE
Only if the service you are currently watching provides a Dolby Digital audio track, you can enjoy Dolby Digital sound.
4.3
Local time setting
You should set your local time for timer events.
24 Preference Settings
Select the Settings > Time menu. You should see a screen like the left figure. You can set the clock manually or use the time signal, Greenwich Mean
Time (GMT), carried as part of the digital television broadcast.
To use Greenwich Mean Time, take the following steps:
1. Set the Mode option to Auto , then the Time Offset option becomes enabled.
2. Set the Time Offset option to the time difference between your time zone and GMT referring to Table 4.1
.
3. Make sure that your local time is correctly displayed on the Local Time item.
To set the local time manually, set the Mode option to Manual and enter your local time to the Local Time option with the numeric buttons. The time format is day/month/year 24hour:minute .
If daylight saving time is observed in your state at the moment, set the Daylight Saving Time option to On .
NOTE
Daylight saving time adds one hour to the time when the option is set to On . When setting the time offset from Greenwich Mean Time, make sure that time offset does not include daylight saving time.
4.4 Parental control 25
Table 4.1: Time offset table
Time offset City
GMT − 12:00 Eniwetok, Kwajalein
GMT − 11:00 Midway Island, Samoa
GMT − 10:00 Hawaii
GMT − 09:00 Alaska
GMT − 08:00 Pacific Time US, Canada
GMT − 07:00 Mountain Time US, Canada
GMT − 06:00 Central Time US, Canada, Mexico City
GMT − 05:00 Eastern Time US, Canada, Bogota, Lima
GMT − 04:00 Atlantic Time Canada, La Paz, Dominican Republic
GMT − 03:30 Newfoundland
GMT − 03:00 Brazil, Georgetown, Buenos Aries
GMT − 02:00 Mid-Atlantic
GMT − 01:00 Azores, Cape Verde Islands
GMT London, Lisbon, Casablanca
GMT + 1:00 Paris, Brussels, Copenhagen, Madrid
GMT + 2:00
GMT + 3:00
GMT + 3:30
South Africa, Kaliningrad
Baghdad, Riyadh, Moscow, St. Petersburg
Tehran
GMT + 4:00
GMT + 4:30
GMT + 5:00
GMT + 5:30
GMT + 6:00
GMT + 7:00
GMT + 8:00
GMT + 9:00
Abu Dhabi, Muscat, Baku, Tbilisi
Kabul
Ekaterinburg, Islamabad, Karachi, Tashkent
Bombay, Calcutta, Madras, New Delhi
Almaty, Dhaka, Colombo
Bangkok, Hanoi, Jakarta
Beijing, Perth, Singapore, Hong Kong
Tokyo, Seoul, Osaka, Sapporo, Yakutsk
GMT + 9:30 Adelaide, Darwin
GMT + 10:00 Eastern Australia, Guam, Vladivostok
GMT + 11:00 Magadan, Solomon Islands, New Caledonia
GMT + 12:00 Fiji, Auckland, Wellington, Kamchatka
4.4
Parental control
In general, television programmes are classified according to the level of violence, nudity and language of their content.
When you are watching a programme, you can check its programme classification on the information box. For the information box, see § 5.2.3
. You can prevent your children from watching specific programmes by specifying a maximum permissible level.
26 Preference Settings
Select the Settings > Parental
Control menu. You should see a screen like the left figure, and you will be asked your
Personal Identification Number
(PIN). The number is initially set to ‘0000’ as default.
If you wish to block programmes for viewers aged 15 or above, set the Censorship option to 15 (age) . Setting it to No block blocks no programme; on the other hand, setting it to Total block blocks every programme.
NOTE
If a programme has no rating information, your censorship setting will not take effect.
If anyone is trying to watch a programme that is of or above the censorship setting, the person has to enter the personal identification number to override. To change the number, select the
Change PIN Code menu, then a box pops up, asking a new
PIN. Enter a desired number twice for confirmation.
You can also restrict uses of some menus. Selecting the Access
Control menu displays a list of menus that you can lock. If the
Time item is set to Locked , you have to enter the PIN when accessing the Time menu. If you enter a wrong number, you cannot use the menu. To release a locked item, set it to Unlocked .
4.5
Options for recording
4.5 Options for recording 27
To set the options for recording, select the Settings > Recording menu. You should see a screen like the left figure.
To enable the time-shift function, you should set the Time Shifting option to anything other than Disable . The available range for this option is 30 minutes to 5 hours. You will have the latest of the current programme as long as the duration specified at this option.
You can set the duration of the timer recording. Set the Timer
Recording Duration option as you desire. Its available range is
10 minutes to 3 hours.
Time padding is the feature of adding extra recording time to the beginning or end of a programme, so that you do not miss any part of the programme. Set the Time Padding of Timer
Recording option as you desire. The [F] and [R] respectively indicate the beginning and the end of a programme to add the time padding. Its available range is 0 to 30 minutes.
You can adjust the duration of the instant recording. Set the
Instant Recording Duration option as you desire. Its available range is 30 minutes to 5 hours.
28 Preference Settings
4.6
Options for playback
To set the options for playback, select the Settings > Playback menu. You should see a screen like the left figure.
If you want to play back a recorded file from beginning, set
Starting Position option to Beginning . To play back a recorded file from the part where you were watching, set this option to
Continuing .
To make a descrambled copy from a scrambled recording, set the Descramble Mode option to Auto Recording ; otherwise, set this option to Normal .
You can adjust the jump interval that is for playback. Set the
Jump Time Interval option as you desire. Its available range is
10 seconds to 3 minutes.
If you want to enjoy more levels of playback speed, set the Trick
Mode Level option to 2x, 4x, 8x, 16x, 32x, 64x ; otherwise, set it to 4x, 16x, 64x .
NOTE
You can enjoy video files such as DivX with the digital receiver. However, the above options might not be effective depending on the video files to be played. For detailed description on how to play back a video file, refer to § 7.3
.
If you have subtitle files such as .smi, .sub, .idx, and .srt, the digital receiver can also display them. The Media Subtitle item provides some options for video subtitle. When you play back
4.7 Options for on-screen display 29 a video file with a subtitle file, if the subtitle does not match the video, then you can synchronise them by adjusting the value of the Sync option. In addition, you can change the colour and size of subtitle by setting the Font Color and Font Size options to one you prefer.
4.7
Options for on-screen display
To set the options for the onscreen display (OSD), select the
Settings > OSD menu.
You should see a screen like the left figure.
To adjust the transparency level of the OSD, set the OSD Transparency option as you desire. Its available range is 0 to 50 percent.
To adjust the display time of the information box, set the Info
Box Display Time option as you desire. Its available range is
1 to 30 seconds. If you set this option to No Info Box , the information box will not be displayed when you switch services.
However, pressing the button will display the information box. If you set this option to Never Hide , the information box will always be displayed. For the information box, see § 5.2.3
.
In addition, you can raise or lower the position of the information box. Set the Info Box Position option as you desire. Its available range is −
10 to +3 lines. The higher you set the option, the lower the information box will be positioned.
If any service’s name is too long to fit the width of the service name column on the services list screen, you can get it to scroll
30 Preference Settings by setting the Text Scroll option to anything other than Disable .
With the choice of Full Scroll , it will be fully scrolled until its end disappears; with the choice of Part Scroll , it will be scrolled only to its end.
4.8
Options for standby mode
You can have the current time displayed on the front display in standby mode. Select the Settings > Others menu and set the Standby Mode option to Active ; otherwise, set it to Passive .
When you set the Standby Mode option to Active , the receiver can also bypass the signal from the antenna. To save power consumption, you might as well set the Automatic Power Down option to Enable . With this option enabled, the receiver will be turned off automatically when there is no manipulation over three hours.
31
Chapter 5
Every Day Use
5.1
Volume control
Use the V
− and V + buttons to alter the volume to a comfortable level. You may need to adjust the volume on your television set too. To temporarily switch off the sound, press the button. Press it again to restore the sound to previous level.
5.2
Watching television
To change services, press the P
− or P + button. Pressing the button switches to the previously viewed service. In addition, you can switch to your desired service by entering its service number with the numeric buttons. You can also select a service to watch in the services list.
5.2.1
The services list
To view the services list, press the button.
32 Every Day Use
On the services list, you can see the service information as follows:
• Service number and name
• Multiplex information
A dollar sign ( $ ) may be marked on some entries, indicating pay service. To watch pay services, you need a subscription card.
To select a desired service, put the highlight bar on its entry with the P + or P − button and press the selected service will be presented.
button, then the
Pressing the V
− or V + button skips over 10 entries up or down. Entering a service number with the numeric buttons puts the highlight bar on its entry.
You can switch between the television services list and the radio services list by pressing the button.
See § 6.1
as to how to edit the services list.
5.2.2
The favourite service lists
You can select a service on a favourite list as well as on the services list.
5.2 Watching television 33
To display the favourite lists, press the button at the services list screen. For the services list, see § 5.2.1
.
To select a favourite list, put the highlight bar on a desired favourite group list and press the button, then the selected favourite group’s services will be listed.
As to how to edit the favourite lists, refer to § 6.2
.
To select a favourite service, put the hightlight bar on a desired service and press the button, the it will be displayed. To select another group, press the button.
After you have selected a favourite service, if you then switch to another service using the P + or P
− button, it will be also another favourite service of the selected group. The digital receiver will remind you what group you have selected by displaying its name at the top right of the screen whenever you switch services.
To return to the services list, press the button. Besides that, you can add or delete a favourite group or service.
To add the service you are currently watching into a favourite group, press the button to display additional options, and then select Add this service item.
To remove the currently highlighted favourite grop or service, select Delete item in the additional option box, then you get asked for confirmation; with the choice of Yes , it will be removed.
5.2.3
Viewing programme information
Pressing the button displays the information box, on which you can see all of the following:
34 Every Day Use
• Service number and name
• Transponder information
• Signal level and quality
• Programme name
• Programme classification sign
• Programme summary
• Broadcasting time
• Current time
In addition, you might see the following symbols:
• Subtitle symbol ( ) if subtitle tracks are provided on the current programme.
• Teletext symbol ( ) if teletext pages are provided on the current service.
• Dolby Digital symbol ( ) if a Dolby Digital audio track is provided on the current programme.
• Lock symbol ( ) if the current service is locked.
• Dollar symbol ( $ ) if the current service is a pay service.
Pressing the button once more displays detailed information about the current programme. To hide the information box, press the EXIT button.
5.2.4
Selecting audio tracks
Some programmes are provided with audio tracks in one or more languages. Pressing the button displays available audio tracks. Once you select an audio track, that track will be heard. In addition, you can enjoy audio tracks in four sound modes: Stereo , Mono , Left or Right .
5.2.5
Selecting subtitle tracks
Some programmes are provided with subtitle tracks in one or more languages. If the current programme provides subtitle
5.3 Viewing electronic programme guide 35 tracks, the subtitle symbol ( ) will be marked on the information box. Pressing the button displays available subtitle tracks. Once you select a subtitle track, it will be displayed.
5.2.6 Viewing teletext
On some services, such information as weather reports, news or stock quotations is provided by means of teletext. If the current service provides teletext, the teletext symbol ( ) will be displayed on the information box. Press the button to view teletext pages.
Select a page to view by entering its page number with the numeric buttons. You can zoom into a teletext page with the button, and adjust its transparency level with the button.
To clear the teletext screen, press the EXIT button.
5.3
Viewing electronic programme guide
The Electronic Programme Guide (EPG) shows the current and scheduled programmes that are or will be available on each service with a short summary for each programme.
Pressing the GUIDE button displays the electronic programme guide, on which you can see the following:
• Scheduled programmes
• programme summary
• Broadcasting date
• Broadcasting time
To see detailed information of a desired programme, put the highlight bar on the programme with the V
− or V + and press the button button. To switch to another service, press the − or + button.
36 Every Day Use
You can travel over previous days with the button, and can travel over next days with the button.
To see the programme guide for radio broadcasts, press the button. To switch it back, press the button again.
Pressing the button will rearrange the form, swapping the columns and rows. To switch it back, press the button again.
You can make a timer recording on the electronic programme guide. See § 7.1.3
for detailed description.
5.4
Using time-shift
You can pause and resume a live television programme, and even rewind and replay it. When you are watching a programme and you miss something, you can rewind and replay it. Or when your attention is needed elsewhere, you can pause a live TV and resume a short time later without losing any of the programme.
When you do this, you are no longer watching the live programme, instead you are watching a delayed presentation. This is called time-shifted television.
You can skip commercials until you catch up to the live broadcast.
In order to use the time-shift feature, set the Time Shifting option to desired duration of time. Then the digital receiver will archive the programme as much time as you set in the option.
See § 4.5
.
The time-shift will be reset each time you change to another service. With the time-shift, the following operations are pos-
5.4 Using time-shift 37 sible:
• To go back in time, hold down the button; to go forward, hold down the button. The progress bar is displayed momentarily with a preview window.
• You can navigate using the progress bar, refer to § 7.3.1
.
• You can jump backward and forward by pressing the and buttons. You can change the jump time at the
Jump Time Interval option. See § 4.6
.
• You can change playback speed. See § 7.3.2
for slow motion. For fast motion, see § 7.3.3
.
• To check your current position in time-shift, press the button. The time difference compared to live programme is displayed momentarily in top right corner of the screen. A value of − 02:00 means two minutes behind the live programme.
• To end time-shift, press the gramme will be displayed.
button. The live pro-
NOTE
You can adjust some options for time-shift. Refer to § 4.5
.
38 Organising Services
Chapter 6
Organising Services
6.1
Editing the services list
You would have got the services list after service search. You can rename, move, lock or delete service entries on the services list.
Select the Edit Services > Edit
Service List menu. You should see a screen like the left figure.
There are editing options on the left column and service entries on the right column.
Once you put the highlight bar on a desired option on the left column and press the button, you can select a desired service to edit on the right column. To go over to the other column, press the button.
To edit the radio services list, press the button, then radio
6.1 Editing the services list 39 service entries will be listed on the right column. To switch back to the television services list, press it again.
To change the name of a service, select the Rename and select a desired service; then the on-screen keyboard appears. See
§ 6.3
as to how to use the on-screen keyboard.
Unlike analogue broadcasts, each service does not have a proper service number in digital broadcasts. Service numbers are just assigned to services in the order that they were found in service search. So you can reassign a service number by moving a service entry. To move a service entry, select the Move option and select a desired service; then the selected service becomes darker. As you move it up or down, it gets renumbered according to the position. Press the button to fix it.
You can lock some services to prevent your children from watching them. To lock a service, select the Lock option and select a desired service; then the selected service gets marked with a lock symbol ( ) on it. If anyone tries to watch a locked service, the person has to enter the personal identification number that is set to the Change PIN Code option. See
§ 4.4
for this option. Pressing the button on a locked service entry turns it back to be unlocked.
To delete a service, select the Delete option and select a desired service with the button, and then press the EXIT button; you get asked for confirmation. If you select Yes , the selected service will be deleted. If you want to undo the deleted service, there is nothing you can do but perform a service search again.
Once you select the Sort option on the left column, sorting options are displayed as follows:
Default by service number
Alphabetic by service name
FTA–CAS from free services to pay services
CAS–FTA from pay services to free services
Provider by broadcaster
40 Organising Services
6.2
Editing the favourite lists
You can make your own favourite service lists. In fact, you can define multiple favourite service lists, each being a ‘group’ of chosen services.
Select the Edit Services > Edit
Favorite List menu. You should see a screen like the left figure.
There are three columns:
• Group name (left)
• Favourites list (centre)
• Services list (right)
The services list contains all available services, whereas the favourites list contains only chosen services that have been added to the highlighted group. As you move the highlight bar up or down on the group list, favourite services belonging to the highlighted group get shown in the favourites list.
You can add up to 30 groups. To add a new group, select the
NEW item in the group list, then the on-screen keyboard appears. See § 6.3
as to how to use the on-screen keyboard.
To rename a group, put the highlight bar on the group entry you want and press the button, then the on-screen keyboard likewise appears.
To delete a group, put the highlight bar on the group entry you want and press the button, then a message box appears, asking you for confirmation. With the choice of Yes , it will be deleted.
You can add a favourite service to a group by taking the following steps:
1. Put the highlight bar on a desired group entry in the group list and press the button to select it. The high-
6.3 How to use on-screen keyboard 41 light bar then moves to the services list.
2. To add a service to the selected group, put the highlight bar on a desired service entry and press the button.
The selected service entry gets added to the favourite list.
Repeat this step to add more entries.
3. Press the button, and the highlight bar gets moved to the favourite list. You can delete a favourite entry with the button.
4. To select another group, press the button again, then the highlight bar gets moved to each column.
Furthermore, you can rearrange a group’s favourites by moving a favourite entry. To move a favourite entry, put the highlight bar on the favourite entry you want and press the button. Press the V
− and V + buttons or + and − buttons to move it to a desired place and press the button. To add radio services, press the button, then radio service entries get listed in the services list. To recall the television services list after adding radio services, press the button again.
As to how to use the favourite service lists you organised, refer to § 5.2.2
.
6.3
How to use on-screen keyboard
You can move the highlight key horizontally with the
V + the P + and P
−
V − and buttons and vertically with buttons. Pressing the button on a key enters its letter in the input line.
42 Organising Services
To type a space, select the Space key or alternatively press the button. To type lower case letters or numerals, select the
Shift key or alternatively press the button. To delete a letter, put the cursor to the right of the desired letter on the input line and then select the Del key or alternatively press button. You must select the Save key or alternatively press the button to complete your typing; otherwise if you press the
EXIT button, it will not be saved.
43
Chapter 7
Recording and Playback
If you want to record TV programmes, you have to link an external hard drive to the USB port of the digital receiver.
NOTE
The external hard drive should be formatted in the NTFS file system. It is also recommended to use an external power socket to have the external hard drive supplied by its own power.
7.1
Recording a programme
Once a recording gets started, a symbol like the left figure will be displayed at the top right of the screen for a few seconds.
CAUTION
Do not move the digital receiver nor pull out the power plug while it is running. It may cause damage to recorded
44 Recording and Playback programmes. Topfield is not responsible for damages inflicted on files that are stored on the hard drive.
7.1.1 Instant recording
To instantly record a programme you are watching at present, press the button.
Pressing the button will not pause the current recording like it does with a video recorder. Instead, pressing the button will pause the live show and begin time-shifting within the current recording even with the Time Shifting option disabled.
In short, it is still possible to pause a recording, but literally recording continues in the digital receiver.
After a recording has started, pressing the button displays a menu like the left figure, in which you can set the recording duration.
To specify an arbitrary recording duration, set the Duration option as you desire with the − and V + buttons and press the
OK button; the recording will end at the specified time.
If the information about the next programme is provided by the electronic programme guide, the After this program and
After next program options will be enabled. Once the After this program option is selected, the current recording will stop at the time when the current programme is scheduled to end.
Likewise, once the After next program option is selected, the current recording will stop at the time when the next programme is scheduled to end.
7.1 Recording a programme 45
To stop recording, press the button; then a box like the left figure appears, which shows the programme currently being recorded.
Select recording by using navigation buttons then press recording.
button to stop the
While a recording is going on, you can play back one of the recorded programmes.
To view the recorded programme list, press the button or alternatively select the Recorded
Program menu. See § 7.2
for detailed description about the recorded programme list.
7.1.2
Timer recording
You can set a programme to be recorded at a specific time.
Even if the digital receiver is in standby mode, it will switch into active mode and start recording at a specified time. When the recording comes to the end, the digital receiver will switch back into standby mode again in one minute. However, if you press any button on the remote control or on the front panel even just one time, the digital receiver will not switch into standby mode.
46 Recording and Playback
To add a timer recording, select the Reservation menu, then the timer list will be displayed. To add a new timer event, press the button, and a box like the left figure appears. Take the following steps:
1. Set the Record option to On to make a recording. If this option is set to Off , the digital receiver will turn on at the specified time but not record; instead, you may record with your video recorder or suchlike in this case.
2. You may have two sources for recording, TV and radio.
Set the Type option to your desired source.
3. Set the Service option to the service which provides the programme you want. Pressing the button on this option displays a services list, from which you can select your desired service.
4. Set the Mode option as you desire. There are five timer modes:
One Time means literally ‘one time’.
Every Day means literally ‘every day’.
Every Weekend means ‘Saturday and Sunday every week’.
Weekly means ‘one day every week’.
Every Weekday means ‘from Monday to Friday every week’.
If your favourite programme is broadcast at weekends and you wish to record every episode of the programme, set the Mode option to Every Weekend .
5. Set the Date option to a desired date, on which the digital
7.1 Recording a programme 47 receiver will turn on. The date format is day/month/yearday of the week .
Set the Start Time option to a desired time, at which the recording will be started. The time format is hour:minute .
6. Set the Duration option to a desired time, in which the recording will be finished.
7. Pressing the button on the File Name option displays the on-screen keyboard, with which you can specify a file name for the timer recording. If you do not specify anything, it will be named after the service name. See
§ 6.3
as to how to use the on-screen keyboard.
8. To set a recording reservation with the above settings, select the OK item; otherwise, it will not be saved and will not occur.
You can also edit or delete timer events in the timer list. To edit a timer entry, put the highlight bar on the entry you want and press button; then appears a box in which you can change its settings in the same manner as making a new one.
To delete a timer event, put the highlight bar on the entry you want to remove and press the button, then you get asked for confirmation. With the choice of Yes , it will be deleted. To delete all timer event, press the button.
You can sort timer events by time with the button.
48 Recording and Playback
7.1.3 Scheduling recordings using the programme guide
If the electronic programme guide is properly provided, you can make timer events on it. The instructions on how to make timer recordings using the electronic programme guide are as follows:
1. Press the GUIDE button to display the electronic programme guide.
2. Select a programme you want to record with the navigation buttons.
3. To make a timer event without recording, press the button; the letter P is displayed. To make a timer event with recording, press it once more or alternatively press the button, then the letter R is displayed.
4. Pressing the button once more will cancel the timer.
7.1.4
Recording a pay service programme
You can record a pay service programme without the subscription card. However, you need the subscription card to play it back because it has not been descrambled. So it is recommended to record pay service programmes with a proper subscription card so that they can be descrambled and recorded.
In that case, you can enjoy them without the subscription card like free services.
To record a programme of a pay service in descrambled form, take the following steps:
1. Select a programme of a pay service you want to record.
7.2 File archive 49
2. Make sure that the subscription card is inserted in the slot on the front of the digital receiver.
3. Start recording.
4. Do not switch to other service nor use time-shift until recording is finished.
NOTE
If you switch to other service or use time-shift in the middle of recording a pay programme, it will be recorded without descrambling from that moment. Even if the recording is only partially descrambled, you need the subscription card to play it back.
7.2
File archive
When a programme is recorded, it is stored as a file on the hard drive of the digital receiver. You can select a recording to play back from the recorded programme list.
Select the Recorded Program menu or alternatively press the button to display the recorded programme list. The file information is comprised of the following elements: file number, file name, recording time, running time, file size and so on.
You can play, move, delete, rename and lock a recording file.
You can also sort the recording files by file name, running time or file size. In addition, you can make a new folder.
50 Recording and Playback
7.2.1 To delete a recording
To delete a recording, put the highlight bar on it and press the button, then you get asked for confirmation. With the choice of Yes , it will be deleted.
7.2.2 To sort recordings
To sort the recordings, take the following steps:
1. Press the button to display additional options.
2. Set the Sorting option to Alphabetic , Time or Size as you want.
3. Press the EXIT button.
4. They will be sorted by the specified option.
7.2.3
To lock a recording
To lock a recording so that other persons cannot play or delete it, take the following steps:
1. Put the highlight bar on a desired recording.
2. Press the button to display additional options.
3. Set the Lock option to Locked .
4. Press the EXIT button.
5. The lock symbol ( ) is displayed on it.
If you select a locked recording to play it back, you will be asked for your personal identification number.
7.2.4
To rename a recording
To change a recording’s name, take the following steps:
1. Put the highlight bar on a desired recording.
2. Press the button to display additional options.
3. Select the Rename option, and the on-screen keyboard appears. Change the name and save it. See § 6.3
as to how to use the on-screen keyboard.
7.3 Playing back a recording 51
7.2.5 To make a new folder
To make a new folder, press the button, then a new folder named GROUP # is created. You can change its name in the same manner as renaming a recording. See above.
7.2.6 To move a recording to another folder
To move a recording to another folder, put the highlight bar on a desired recording and press the button. If an external hard drive is connected to the digital receiver, you get asked to select between the built-in and external hard drive. Select
Internal , then the folders are listed. Once you choose a folder, the recording is moved to it.
7.3
Playing back a recording
When a programme is recorded, its additional contents such as audio track or subtitle track are also recorded together. So you can enjoy them while playing back a recording.
The instructions on how to play a recording are as follows:
1. Select the Recorded Program menu or alternatively press the button to display the list of recorded programmes.
2. Put the highlight bar on a desired recording and press the button, then an option box pops up.
3. To play from beginning, set the Starting Position option to Beginning ; to play from the point that you have stopped at the last time, set it to Continuing . To start playback, select the Play item.
4. To stop playback, press the button.
During playback, you can enjoy the following tricks:
• To see the detailed information about the currently played recording, press the button; then the information box appears and shows its file name, running time, programme information, and so on.
52 Recording and Playback
• To pause playback, press the press the button.
button. To resume it,
• To view the progress bar, press the button; to hide it, press the button again.
• When the progress bar is hidden, you can move to a desired scene by entering a progress percentage with the numeric buttons.
7.3.1 To navigate using the progress bar
First press the button to display the progress bar.
• To go forward, hold down the V + button; to go backward, hold down the V − button.
• If there are no bookmarks, you can jump forward by the minute set to the Jump time Interval option with the button. See § 4.6
for that option. Refer to § 7.3.4
as to how to bookmark a position.
• To jump to the beginning, press the button.
• To jump to the end, press the button.
• To hide the progress bar, press the button again.
7.3.2
To play in slow motion
To watch in slow motion during a playback, press the button. If you press it repeatedly, the playback speed changes in 4 steps: 1/2, 1/4, 1/8 and 1/16 times. To resume normal speed, press the button.
7.3.3
To play in fast motion
To watch in fast motion during a playback, press the button. If you press it repeatedly, the playback speed changes. To resume normal speed, press the button.
You can play not only forward but also backward in fast motion. To play backward, press the button. If you press it
7.3 Playing back a recording 53 repeatedly, the playback speed changes. To resume normal speed, press the button.
You can change the playback speed in 3 steps (4, 16 and 64 times) or in 6 steps (2, 4, 8, 16, 32 and 64 times). See § 4.6
.
7.3.4 To make a bookmark
You can mark favourite parts of a recording by creating bookmarks and then jump to them in sequence. Bookmarks are stored with the recording so that you can use them again afterwards.
To make bookmarks, take the following steps during playback:
1. Press the button to display the progress bar.
2. To add a bookmark, press the button at a desired scene, then you will see a small pointer appear above the progress bar like in the picture above.
3. To jump forward to the next bookmark, press the button.
7.3.5
To play back a recording repeatedly
You can play back a recording repeatedly both in whole and in part.
To play back in whole, press the button when the progress bar is hidden, then the repetition symbol ( ) is displayed on the information box. To cancel it, press the button again.
To play back in part, take the following steps:
1. Press the button to display the progress bar.
54 Recording and Playback
2. Move to the beginning scene of the part you want to play repeatedly by holding down the − or + button.
3. Press the button, then the pointer starts to blink.
4. Move to the end scene; the selected part is marked in black.
5. Press the button again to start repeated playback.
6. To cancel it, press the button when the progress bar is displayed.
7.3.6 To play back recordings in sequence
You can play several recordings continuously in sequence by performing the following steps:
1. Press the button or alternatively select the Recorded
Program menu to display the list of recorded programmes.
2. Select each desired recording with the button. Once a recording is selected, it gets numbered.
3. Press the button to start playback.
4. The selected recordings are played in the sequence that they are numbered.
5. To jump to the beginning of the next recording in the queue, press the button to display the progress bar, then press the button.
7.3.7
To play back a scrambled recording
If you have recorded a programme of a pay service with the subscription card, you can play it as freely like that of a free service. Otherwise you need the subscription card to play it back because it has been recorded without descrambling even though it may have been partially descrambled.
On the recorded programme list, a purely green $ indicates the recording has been wholly descrambled; on the other hand, a
7.4 Copying a recording 55 yellowish green $ indicates it has been partially descrambled, and a purely yellow $ indicates it has not been descrambled at all.
7.4
Copying a recording
You can record the file in whole or in part during a playback by performing the following steps:
1. Start playback of a recording you want.
2. Move to a scene from which you want to start copying by holding down the − or + button.
3. Press the button, then it will be copied in a new file which is named after the original recording with a suffix of ‘COPY’ and a number.
4. To stop copying, press the button.
7.5
Playing back a video file
If you have media files such as photos, videos, and music, you can also enjoy them with the digital receiver by simply selecting a file you want to display or play back. Media file formats that you can play back with the digital receiver are as follows:
• video: DivX, XviD, VOB, MKV, MP4, and AVI
• photo: JPG
• music: MP3
When playing a video file, if it has its own one or more subtitle files, you can select one you prefer with the button to display subtitle.
NOTE
This digital receiver supports only version 3.x, 4.x, 5.x, and
6.x of the DivX format.
56 Recording and Playback
7.6
Formatting the hard disk
If a new hard drive is installed, it must be formatted because you can neither record nor use time-shift with an unformatted hard disk.
You can delete permanently all contents stored in a hard drive by formatting it. Select the Installation > System Recovery >
Format Hard Disk menu, and then select the hard drive you want to format.
NOTE
The hard drive on the digital receiver will be formatted in the NTFS file system.
57
Chapter 8
Firmware Update
8.1
From a memory stick
If you have a USB memory stick, you can update the firmware from it by taking the following steps:
1. Download a new firmware from the Topfield website.
2. Copy the firmware file to your memory stick.
3. Insert the USB memory stick into the USB port on the digital receiver.
4. Select the Installation > Firmware Upgrade > USB
Firmware Upgrade menu, and the files in the USB memory will be listed.
5. Place the highlight bar on the right firmware file and press the button, and a countdown will be displayed on the front display of the digital receiver.
6. When the message of ‘END’ appears, restart the digital receiver.
58 Firmware Update
It is possible to update the firmware to the latest version over the air. If a new version is available at any time, then a message box pops up, asking you whether to start firmware update.
With the choice of Yes , you will be moved to the SSU Software
Upgrade menu, and the firmware update will be started.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Correct disposal of this product
This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can dispose this product for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
At any time during the life of a product Topfield Co., Ltd. may change or modify the hardware or software on any product to introduce new features or improve the functionality of the product.
Copyright © 2010, Topfield Co., Ltd. All rights reserved.
http://www.i-topfield.com
English version
110T-N6A0B-701-0
Public link updated
The public link to your chat has been updated.
Advertisement
