Motorola i205 - Cell Phone - iDEN User Manual

Nextel iDEN

Digital Multi-service Data-capable Phone

i205 Phone User’s Guide

@NNTN4692A@

NNTN4692A

Contents

Getting Started........................................... 1

Removing the Back Phone Cover.................... 2

Locating Your SIM Card .................................. 3

Battery ............................................................. 3

Powering On and Off ....................................... 6

Activating Service ............................................ 6

Enabling Over-the-Air Security ........................ 6

Finding Your Phone Number ........................... 7

Completing Setup ............................................ 8

Phone Basics ................................................... 9

SIM Card Security.......................................... 12

Locking the Keypad ....................................... 15

Accessories ................................................... 16

Nextel Customer Care ................................... 17

Making Calls ............................................. 19

Receiving Calls .............................................. 19

Call Icons ....................................................... 20

Entering the Number to Call .......................... 20

Using Mute..................................................... 22

Making Emergency Phone Calls.................... 22

Call Alerts ................................................ 25

Sending Call Alerts ........................................ 25

Receiving Call Alerts...................................... 25

Using the Call Alert Queue ............................ 25

Recent Calls............................................. 27

Storing Recent Calls to Contacts ................... 27

Deleting Recent Calls .................................... 28

Entering Text ........................................... 29

Using Alpha Mode.......................................... 29

Using Word Mode .......................................... 29

Special Function Keys ................................... 30

Using Numeric Mode .....................................31

Using Symbols Mode .....................................31

Contacts ................................................... 33

Viewing Contacts ........................................... 34

Creating Entries .............................................35

Storing Numbers Faster................................. 36

Editing Entries ................................................ 37

Deleting Entries.............................................. 37

Checking Capacity .........................................38

Creating Pauses and Waits ........................... 38 i

ii

International Numbers ................................... 38

Memo ........................................................ 39

Nextel Voice Mail ..................................... 41

Setting Up Your Voice Mail Box..................... 41

Playing Messages.......................................... 41

Changing Your Password .............................. 42

Recording Your Name ................................... 42

Recording Your Active Greeting .................... 42

Advanced Voice Mail Features ...................... 43

Messages ................................................. 49

Message Notifications.................................... 49

Voice Mail ...................................................... 50

Text and Numeric Messages ......................... 50

Net Alerts ....................................................... 51

Call Forwarding........................................ 53

Forwarding All Calls ....................................... 53

Turning Off Call Forwarding........................... 54

Forwarding Missed Calls ............................... 54

Viewing Call Forwarding Settings .................. 55

Ring Tones............................................... 57

Setting Your Phone to Vibrate ....................... 57

Assigning Ring Tones to Contacts ................. 58

Ring and Vibrate ............................................ 58

Viewing Ring Tone Assignments ................... 58

Downloading More Ring Tones......................59

Managing Memory .........................................59

Deleting Custom Ring Tones ......................... 59

GPS Enabled............................................ 61

IMPORTANT: Things to Keep in Mind ........... 61

Making an Emergency Call ............................ 62

Viewing Your Approximate Location ..............63

Enhancing GPS Performance........................ 64

Updating Satellite Almanac Data ................... 65

Setting Privacy Options.................................. 66

Using GPS with Map Software....................... 67

Nextel Online

®

Services ......................... 71

NOL Services .................................................71

Accessing NOL Services From Your Phone .. 71

Advanced Calling Features .................... 73

Call Waiting.................................................... 73

Call Hold ........................................................ 74

3-Way Calling ................................................ 74

Creating Pauses and Waits While Dialing ..... 75

Making International Calls ............................. 75

Setting One Touch Direct Connect ................ 75

Group Connect

TM

Calls ................................. 76

Call Timers..................................................... 77

Using Your Phone as a Modem ..................... 78

Making TTY Calls .......................................... 79

Special Dialing Codes.................................... 80

Additional Phone Features ............................ 81

Customizing Your Phone ........................ 83

Setting the Volume ........................................ 83

Setting Your Phone to Not Ring..................... 83

Seeing the Display Better .............................. 84

Using a Headset ............................................ 84

Using Settings................................................ 84

Optional Features .......................................... 86

Changing the Phone Covers.......................... 87

Nextel Customer Care ............................. 89

Domestic Customer Care .............................. 89

Nextel Worldwide Customer Care..................90

Understanding Status Messages........... 91

Nextel Terms and

Conditions of Service ............................. 93

Safety and General Information........... 105

RF Operational Characteristics .................... 105

Portable Radio Product Operation and EME

Exposure...................................................... 105

Electro Magnetic Interference/Compatibility 108

Medical Devices ........................................... 108

Operational Warnings .................................. 109

Operational Cautions ................................... 110

Accessory Safety Information ...................... 111

MOTOROLA LIMITED WARRANTY...... 113

Limited Warranty

Motorola Communication Products

(International) ........................................ 117

Patent and Trademark Information...... 121

Index....................................................... 123 iii

iv

DECLARATION OF CONFORMITY

Per FCC CFR 47 Part 2 Section 2.1077(a)

Responsible Party Name: Motorola, Inc.

Address: 8000 West Sunrise Boulevard

Plantation, FL 33322 USA

Phone Number: 1 (800) 453-0920

Hereby declares that the product:

Product Name: i205

Model Number: H62XAH6RR1AN

Conforms to the following regulations:

FCC Part 15, subpart B, section 15.107(a),

15.107(d) and section 15.109(a)

Class B Digital Device

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

v

vi

Getting Started

volume controls

PUSH-TO-TALK

(PTT) button speaker

(in back) back key

Direct Connect

Group Connect speaker on/off antenna audio jack space key microphone accessory connector p

Power button.

Navigation key — press the arrows to scroll through menus and lists.

m

Menu key — accesses context-sensitive menus.

A

Option key — selects the option appearing above it on the display.

s

Send key — places phone calls.

e

End key — ends phone calls; returns to idle screen; in browser mode, returns to Net main menu.

To start using your i205 phone:

• Make sure your SIM card is in place.

• Charge the battery.

• Activate your service.

• Enable over-the-air security.

1

2

Getting Started

Removing the Back Phone

Cover

1 Make sure the phone is powered off. See

“Powering On and Off” on page 6.

2 Slide the release button forward until it releases the back phone cover.

3 Remove the back phone cover from the back of your phone.

Locating Your SIM Card

Your SIM (Subscriber Identity Module) card is a small piece of white plastic located in the SIM card holder in the back of your phone, underneath the battery.

SIM card holder

SIM card

Locating Your SIM Card

Battery

Inserting the Battery

1 With the phone powered off, remove the back phone cover.

2 Insert the top of the battery into the battery area.

Press the bottom of the battery to secure it.

If there is no SIM card in your phone, contact Nextel

Customer Care at 1-800-639-6111.

3 Replace the back phone cover and press it gently until you hear a click.

3

4


Charging the Battery

Your phone comes with a charger.

1 Plug the charger into an electrical outlet.

2 Open the connector cover.

3 Plug the other end of the charger into the accessory connector.

connector cover

Charger Attached appears on the display.

Tip: To remove the charger from the accessory connector: Press the buttons on the sides of the plug. Pull the plug straight out.

4 If you have purchased optional batteries or chargers, see “Charging Times” on page 5.

Note: While the phone is charging, the keypad backlight will not illuminate.

Charging Times

See your Lithium Ion battery and travel charger to determine the appropriate charging time.

Recommended charging times:

Battery Charger

Rapid

High

Performance

2 hours

Maximum

Capacity

3.5 hours

Mid-Rate

4 hours

7.5 hours

For best results, charge the batteries within the temperature range of 50°F to 104°F (10°C to 40°C).

Prolonged charging is not recommended.

Battery

Removing the Battery

1 With the phone powered off, remove the back phone cover.

2 Remove the battery by pushing the battery toward the antenna and lifting it out.

Battery Use and Maintenance

• The Motorola iDEN Approved Lithium Ion chargers provide optimum performance. Other chargers may not fully charge the iDEN Lithium

Ion battery or may yield a reduced number of lifetime charge cycles.

• Extreme temperatures degrade battery performance. Do not store the battery where temperatures exceed 140°F (60°C) or fall below

4°F (-20°C).

• Lithium Ion batteries have a self discharge rate and without use, lose about 1% of their charge per day.

5

6


• The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity.

Powering On and Off

To power your phone on:

1 Extend the antenna.

2 Press p .

As your phone connects to the network, you will see a connecting message. When the idle screen appears, the phone is ready to use.

To power your phone off:

1 Press and hold p

.

2 Push down the antenna.

Activating Service

The first time you power on your phone, your service is activated.

A screen then appears prompting you to select Ok to update your browser information. This screen will only appear during initial activation. See “Enabling

Over-the-Air Security”.

Enabling Over-the-Air Security

To receive Over-the-Air Radio Service Software

(OARSS) Security you must enable security the first time you power on your phone or within 20 days of first activation of your phone.

1 Press

A under Ok.

Note: If you press

A under Later, the idle screen will appear. The next time you select Net from the main menu, you will be prompted to enable security before you can use

Nextel Online ® services.

2 You are prompted to enable security. Press

A under Yes. A series of screens and then the default homepage displays.

3 Press e to return to the idle screen.

Within 24 hours of enabling security, you will receive a Net alert containing your Personal Telephone

Number (PTN), Nextel Customer Care number,

Direct Connect

Group Connect

TM

TM number, and Talkgroup lists for calls.

Note: If you are transferring your phone number to Nextel from your previous carrier, that number will be automatically programmed into the Contacts list for all other handsets that were part of your order.

1 When you receive a Net alert saying New

Browser Message - Receive Programming

Info, press

A under Goto.

2 You are prompted to accept changes to your lists.

Press A under Ok.

3 You are prompted again to accept changes to your lists. Press

A under Ok.

4 A confirmation screen displays. Press

A under

Ok.

5 Press e to return to the idle screen.

Finding Your Phone Number

My Info lets you view your phone number, Direct

Connect number, and other phone information:

1 Press m to access the main menu.

2 Scroll to My Info.

Finding Your Phone Number

3 Press

A under Select.

4 Scroll to see your information:

• Name — Enter your name. See “Entering Text” on page 29.

• Line 1 and Line 2 — your phone numbers for phone lines 1 and 2. These are filled in when you receive your first Net alert after enabling over-the-air security on your phone.

• Direct Connect — Your Direct Connect number is the number that others use to contact you using Direct Connect service. It is filled in when you receive your first Net alert after enabling over-the-air security on your phone.

• Group ID — the number of the Talkgroup you have joined.

• Carrier IP — the IP address assigned to

Nextel. It is filled in when you register for packet data services.

• IP1 Address and IP2 Address — the IP addresses assigned to you for using the

Internet with your phone

• Ckt — Your circuit data number is the number you use if you want to use your phone to transfer circuit data. See “Using Your Phone as a Modem” on page 78. You receive this number from Nextel.

7


8

• Service Status — This information may be used by Nextel Customer Care if there is a problem with your phone’s services.

Completing Setup

Joining a Talkgroup

When you enable over-the-air security, you receive a list of Talkgroups that have been set up for you if you subscribe to this service. The Talkgroup list is saved to Contacts.

To receive Group Connect calls made to any of these Talkgroups, you must join the Talkgroup.

1 Press

A under Contcs. -or-

From the main menu, select Contacts.

2 Scroll to the Talkgroup you want to join.

3 Press

A under Join.

Note: You will now be able to receive Group

Connect communications from this

Talkgroup only. You can only monitor one

Talkgroup at a time.

Setting Up More Talkgroups

You can set up more Talkgroups in three ways:

• Using Group Connect Management on MyNextel at www.nextel.com

• Contacting your Nextel Sales Representative at the time of activation

• Using Wireless Manager to create, manage, and delete Talkgroups

When you create your Talkgroups, you can select your own Talkgroup numbers.

You can join a new Talkgroup by pressing # and entering the number using the keypad. Then press

A under Join.

Nextel Voice Mail

You must set up your voice mail box before you can retrieve messages. See “Setting Up Your Voice Mail

Box” on page 41.

Nextel Worldwide Service

You can use your phone to make calls internationally in select cities using other iDEN ® networks by calling Customer Care to activate international dialing on your account. Countries in which you can use your phone include Argentina,

Brazil, Canada, Philippines, Israel, Mexico and

Peru*.

* credit approval is required.

Customizing Features

You can control many features of your phone, including the volume of incoming sound, rings, and other tones. See “Customizing Your Phone” on page

83.

Phone Basics

Any time your phone is powered on, the display provides you with information and options.

status icons text area menu icon display options

Phone Basics

Display Options

Two display options appear at the bottom of most screens. You select a display option by pressing the option key below it.

Menus and Lists

Your phone’s features are arranged in menus, submenus, and lists.

To access the items in a menu or list, scroll using the navigation key at the top of your keypad. This key lets you scroll up, down, left, or right. Holding down the appropriate part of the navigation key speeds up scrolling.

In this guide, this symbol > tells you to select a menu or list item. For example, Settings > Security means:

1 Scroll to Settings on the main menu.

2 Press

A under Select to see the Settings screen.

3 Scroll to Security and press

A under Select to see the Security screen.

The screen shown above is the idle screen. The idle screen appears when your phone is on, but not engaged in any activity.

Text Area

This area displays menus, messages, names, phone numbers, and other information.

9


Menu Key

Many features provide context-sensitive menus that let you access related features and actions. The m icon appears any time a context-sensitive menu is available. Press m to access the menu.

Main Menu

All your phone’s features can be accessed through the main menu. When you are using a feature, the icon for that feature appears in the upper left corner of the display.

a Net b Settings

Display/Info

Phone Calls

DC/GC Options

Volume

Security

Advanced m Ring Tones list of ring tones

Ring Tones menu

Browse the Web.

Customize your phone.

See page 83.

Assign ring tones and turn ringer off. See page 57.

j n l

My Info

Downloads

GPS

View personal phone information, including phone number and Direct

Connect number. See page 7.

Provides a catalog of downloadable Ring Tones for personalization. Browse through the catalog, download a ring tone of your choice and make that your default ring tone. Ring tones in this catalog will change daily, so check regularly for fresh content.

Find your approximate geographical location. See page 61.

Create, view, store, edit contacts. See page 33.

d Contacts new contact form list of contacts

Contacts menu e Messages

Voice Mail

Text Msgs

Net alert

Access messages. See page 49.

10

f g h

Call Forward

Memo

Call Timers

Set call forwarding options.

See page 53.

Store a number to access later. See page 39.

Phone usage information.

See page 77.

Lists recent calls. See page 27.

i Recent Calls list of calls recent calls menu

Call Setup menu k Call Alert list of call alerts

Call Alert menu

Lists call alerts. See page 25.

Phone Basics

Status Icons

Status icons appear in the two rows at the top of the display. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features.

a b c d e f g d

Battery Strength — More bars on the battery indicate a greater charge.

o p q r s

Signal Strength — More bars next to the antenna indicate a stronger signal.

A Phone In Use — Your phone is active on a phone call.

B Direct Connect In Use — Your phone is active on a Direct Connect call.

C Talkgroup In Use — Your phone is active on a Group Connect call.

1 2 Active Phone Line — 1 indicates phone line 1 is ready to make calls; 2 indicates phone line 2 is ready to make calls.

11


GHI

J KL vM u wy ljik mn

DEF

Call Forward — Your phone is set to forward calls. See “Call

Forwarding” on page 53.

Ringer Off — Your phone is set not to ring. See “Setting Your Phone to

Vibrate” on page 57.

Speaker Off — Sets Direct Connect and Group Connect sound to come through the earpiece rather than through the speaker. Your phone does not ring for Direct Connect and

Group Connect calls if Alert Type is set to Silent or Vibrate.

Messages — You have one or more messages. See “Messages” on page

49.

T9 Text Input — You are using T9

Text Input to enter text. See

“Entering Text” on page 29.

Internet — You are ready to browse the internet or are browsing the internet using a secure connection.

YZ

NO

Packet Data — You are ready to transfer packet data or are transferring packet data. See “Using

Your Phone as a Modem” on page

78.

TTY — You are ready to use your phone to make calls using a teletypewriter device. See “Making

TTY Calls” on page 79.

SIM Card Security

Your SIM card stores all your Contacts and protects your personal information. Since this information is stored on your SIM card, not in your phone, you can remove the information by removing your SIM card.

Note: Except for making emergency calls, your phone will not function without the SIM card.

To prevent unauthorized use of your phone, your

SIM card is protected by a PIN that you enter each time the phone is powered on. You can change the

PIN or turn off the requirement that it be entered.

12

Turning the PIN Requirement On and

Off

When the SIM PIN requirement is off, your phone can be used without entering a PIN.

Important: When the SIM PIN requirement is off, the personal data on your SIM card is not protected. Anyone can use your phone and access your personal data.

When the SIM PIN requirement is on, you are prompted to enter your PIN each time you power on your phone.

Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency calls.

1 From the main menu, select Settings > Security

> SIM PIN.

2 Scroll to On or Off.

3 Press

A under Select.

4 Enter the current SIM PIN.

Note: When you receive your phone, the SIM PIN is 0000. Change your PIN to prevent fraudulent use of the SIM card (see

“Changing the PIN”).

5 Press

A under Ok.

SIM Card Security

Entering the PIN

1 When the Enter SIM PIN Code screen appears after you power on your phone, enter your SIM

PIN.

2 Press

A under Ok.

The message SIM Unlocked displays.

Important: If you enter your PIN incorrectly 3 times, your SIM card is blocked. To unblock your SIM card, you must contact

Nextel Customer Care. See “Unblocking the PIN”.

Changing the PIN

Note: The SIM PIN requirement must be turned on in order to access this feature.


> Change Password > SIM PIN.

2 At the Enter Old SIM PIN Code screen, enter the current SIM PIN.

3 Press

A under Ok.

4 At the Enter New SIM PIN Code screen, enter the new 4- to 8-digit SIM PIN.

5 Press

A under Ok.

6 At the Re-enter New SIM PIN Code screen, re-enter the new SIM PIN to confirm.

7 Press

A under Ok.

13


Changed: SIM PIN displays.

Unblocking the PIN

If you enter your PIN incorrectly three times, your

SIM card is blocked. To unblock your SIM card, you must contact Nextel Customer Care to get a PIN

Unblock Code (PUK).

Important: If you unsuccessfully enter the PUK code

10 times, your SIM card is permanently blocked and must be replaced. If this happens, all data is lost. You will get a message to contact Nextel Customer

Care. Except for making emergency calls, your phone will not function with a blocked SIM card.

To unblock the PIN:

1 Press * # m 1 .

2 At your Nextel Customer Care representative’s request, provide the information needed to give you a PUK code.

3 Select Unblock PIN.

4 Enter the PUK code.

5 Enter a new 4- to 8-digit SIM PIN.

6 Re-enter your SIM PIN.

Note: These steps must be performed in quick succession.

14

If you entered the codes properly, SIM Unlocked appears on the display.

Inserting and Removing Your SIM Card

Important: Do not touch the gold-colored areas of your SIM card.

The SIM card is designed for optimal Contacts storage and feature use. For Nextel SIM card compatibility information, visit www.nextel.com/sim.

If you remove your SIM card and use it with another phone, or use another SIM card with your phone, the following information is erased:

• The recent calls list

• Call forwarding settings

• Net alerts

• Information stored in Memo

• 3 most recent GPS Enabled locations

• Voice records*

• Voice names*

Note: In some cases, Contacts may not be accessible if you move your SIM card to another phone. Contacts entries created with your i205 phone are not readable by an older iDEN SIM-based phone.

* See “Optional Features” on page 86.

Inserting Your SIM Card

1 With your phone powered off, remove the back phone cover and battery.

2 Hold your SIM card as shown.

cut corner

3 Carefully slide your SIM card into your phone, until it lies flat in the SIM card holder.

SIM card holder

Locking the Keypad

Removing Your SIM Card

Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary.

1 With your phone powered off, remove the back phone cover and battery.

2 While holding the tab down, slide your SIM card out of the SIM card holder.

SIM card holder tab

Note: Protect your SIM card as you would any delicate object. Store it carefully.

Locking the Keypad

Locking the phone’s keypad prevents its buttons from being pressed. When the keypad is locked, you can only:

• Power the phone on and off

15


• Unlock the keypad

• Respond to incoming calls, messages, and alerts

Important: Emergency calls cannot be placed while the keypad is locked.

To lock the keypad:

1 From the idle screen, press m

.

2 Press

*

.

If you press a key while the keypad is locked, instructions for unlocking the keypad display briefly.

To unlock the keypad:

1 From the idle screen, press m

.

2 Press

*

.

While the keypad is locked, you can respond to incoming calls, messages, and alerts just as you do when the keypad is not locked. When finished, press e to return to the idle screen. The keypad remains locked.

You also have the option of setting your phone to automatically lock the keypad if there has been no activity for a specified time.


> Keypad Lock.

2 To lock the keypad immediately, select Lock

Now. You will be given the option to press m and

* to lock and unlock the keypad.

16

3 To set a specific time for the keypad to lock if there has been no activity, select Auto Lock and press A under Change.

The keypad can be set to lock in 5, 10, 15 or 20 minutes if the keypad is not touched during the specified time. To turn the auto lock off, repeat step

3 and select Off.

Accessories

Your phone comes with a Lithium Ion Battery and travel charger.

Various accessories are available for use with your

i205 phone, including front and back covers, vehicle battery charger, batteries, Hands-Free accessories and more.

To order additional accessories, go to www.nextel.com or call 1-800-Nextel6. You can also contact your Nextel Authorized Sales

Representative or stop by any Nextel-owned Retail

Store. For information on Nextel retail store locations, go to www.nextel.com.

Nextel Customer Care

Nextel Customer Care: 1-800-639-6111 or dial 611 from your i205 phone.

Nextel Worldwide Customer Care: +1-360-662-5202

(toll-free from your i205 phone).

Nextel Customer Care

17

Getting Started i

205 Phone Menu Tree

Net

Settings

Display/Info

Phone Calls

DC/GC Options

Volume

Security

Advanced

Downloads

GPS

Position

Privacy

Interface

Ring Tones

VibeAll On/Off

Ring Tones

Assign w/vibe

Overview

Memory Usage

Delete

My Info

Name

Line 1

Line 2

Direct Connect

Group ID

Carrier IP

IP1 Address

IP2 Address

CKT

Service Status

Contacts

[New Contact]

New

Search

Capacity

Filter

Call Setup

Delete All

Contacts (if any)

View

New

Search

Edit

Delete Contact

Delete Number

Capacity

Filter

Call Setup

Delete All

Messages

Voice Mail

Text Msgs

Delete All

Memory Meter

Net Alert

Call Forward

All Calls

-

Retrieve Status

Detailed

- If Busy

- If No Answer

- If Unreachable

Retrieve Status

Memo

Store

Cancel

Delete

Call Timers

Last Call

Phone Reset

Phone Lifetime

DC/GC Reset

DC/GC Lifetime

Circuit Reset

Circuit Lifetime

Kbytes Reset

Recent Calls

Recent Calls (if any)

Store

View

Delete

Delete All

Call Alert Queue

Call Setup

Call Alert

Call Alerts (if any)

Store

View

Delete

Delete All

Sort By

Recent Calls

18

Making Calls

Your i205 phone makes two types of calls: digital cellular phone calls and Direct Connect calls. With

Direct Connect calls, you use your phone as a long-range, digital walkie-talkie.

To make a phone call:

1 Enter the number you want to call.

2 Press s to place the call.

3 Press e to end the call.

To make a Direct Connect call:

1 Enter the Direct Connect number you want to call.

2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound.

3 Release the PTT button to listen.

Tip: To let someone know you want to talk to him or her on a Direct Connect call, send a call alert. See “Call Alerts” on page 25.

Dialing Direct Connect Numbers

Every Direct Connect number has 3 parts — an area

ID, a network ID, and a member ID — with an asterisk between each of these parts. For example:

999*999*9999.

When you place a Direct Connect call, you must enter the whole Direct Connect number including the asterisks.

Tip: When you store a Direct Connect number in

Contacts it is good practice to include the whole Direct Connect number including the asterisks in case you travel with your phone, or another Direct Connect user, outside of your network.

Receiving Calls

When you receive a phone call, your phone rings, vibrates, or lights up its backlight.

To answer a phone call:

Press s

. -or-

Press A under Yes. -or-

Press any key on the keypad.

To send a phone call to voice mail instead of answering it:

Press e

. -or-

Press

A under No.

To end a phone call:

Press e

.

19

Making Calls

When you receive a Direct Connect call, your phone emits a chirping sound.

To answer a Direct Connect call:

1 Wait for the caller to finish speaking.

2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound.

3 Release the PTT button to listen.

Call Icons

When you make a call, call icons appear in the text area of the phone’s display.

X Placing a phone call.

W Receiving a phone call.

Y Phone call is active.

Z Phone call is on hold.

U Phone call ended.

When you miss a call, this icon appears in the text area:

V You missed a phone call.

Entering the Number to Call

To enter the number you want to call, you can:

• Use the numbers on the keypad

• Select the number from the recent calls list

• Select the number from Contacts

• Redial the last phone number called

• Use Speed Dial or Turbo Dial ®

• Use One Touch Direct Connect TM

Direct Connect call to make a

• Use a TTY device — see “Making TTY Calls” on page 79

From the Keypad

To enter the number you want to call, press the numbers on the keypad.

If you make a mistake:

• To clear a digit, press

A under Delete.

• To clear all digits, press and hold

A under Delete.

• To insert or delete a digit anywhere in the string of digits you have entered, scroll left or right.

• To cancel, press e

.

20

From the Recent Calls List

The recent calls list stores the last 20 calls you made or received.

To select a number from the recent calls list as the number you want to call:

1 From the idle screen, scroll down. -or-

From the main menu, select Recent Calls.

2 Scroll to the name or number you want to call.

From Contacts

If you have numbers stored in Contacts, you can use these numbers to make calls. For information on entering numbers into Contacts, see “Creating

Entries” on page 35.

Calling from the Contacts List

1 From the main menu, select Contacts.


Tip: To find Contacts entries faster, use the keypad to enter the first letter of the name.

3 Place the call now. -or-

Scroll left or right to display the Contacts type for the number you want to call.

Entering the Number to Call

If you are making a Direct Connect call, your phone places the call to the Direct Connect number stored in the Contacts entry, even if the Direct Connect icon is not displayed.

If you are making a phone call:

• Your phone places the call to the phone number assigned to the Contacts type displayed.

• If the Contacts type displayed is not a phone number, your phone places the call to the phone number stored in the Contacts entry.

• If the Contacts type displayed is not a phone number and you have more than one phone number stored in the Contacts entry, your phone prompts you to select the phone number you want to place the call to.

Calling from a Contacts Entry

1 From the main menu, select Contacts.


3 Press

A under View. -or-

If View is not one of your options: Press m

. Select

View.

4 Place the call now. -or-

Scroll to view more numbers. When you place the call, it is made to the number displayed.

21

Making Calls

Redialing the Last Number

Press and hold s to place a call to the last phone number you called.

Using Speed Dial and Turbo Dial

®

Each phone number stored in Contacts is assigned a Speed Dial number which you can use to enter that number.

Turbo Dial lets you place calls to the phone numbers associated with Speed Dial numbers 1 through 9 without entering the number.

Speed Dial

1 From the idle screen, use the keypad to enter the

Speed Dial number assigned to the phone number you want to call.

2 Press # .

Turbo Dial

From the idle screen, press and hold the Speed

Dial number (1 through 9) assigned to the phone number you want to call.

Using One Touch Direct Connect

TM

One Touch Direct Connect sets your phone to call the most recent Direct Connect number on the recent calls list, or to a Direct Connect number you choose, every time you press the PTT button. See

“Setting One Touch Direct Connect” on page 75.

Using Mute

Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call.

To turn mute on:

Press

A under Mute.

While mute is on, Unmute appears as a display option.

To turn mute off:

Press

A under Unmute.

Making Emergency Phone

Calls

Your phone supports emergency calling.

Emergency phone calls can be made even when your SIM card is blocked or not in your phone.

22

Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.

When you make an emergency call, your phone’s

GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. See “GPS Enabled” on page

61, and particularly “IMPORTANT: Things to Keep in Mind” on page 61 and “Making an Emergency

Call” on page 62, for more information on the limitations of this feature. Because of the limitations of this feature, always provide your best knowledge of your location to the emergency response center when you make an emergency call.

Important: Emergency calls cannot be placed while the keypad is locked.

Important: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.

Making Emergency Phone Calls

23

Making Calls

24

Call Alerts

Sending a call alert lets the recipient know you want to talk to him or her on a Direct Connect call.

When you send a call alert, the recipient’s phone emits a series of beeps and displays your name or

Direct Connect number.

The recipient can:

• Answer — begin a Direct Connect call with the sender

• Queue — store the call alert to the call alert queue, which is a list of call alerts

• Clear — dismiss and delete the call alert

Sending Call Alerts

1 Enter the Direct Connect number you want to send to, as you would when making a Direct

Connect call.

2 Press

A under Alert. Ready to Alert appears on the display.

3 Press the PTT button until Alert Successful appears on the display.

Note: If the alert is not successful, this may mean the person you are trying to reach is on a call or has the phone turned off.

Receiving Call Alerts

When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or

Direct Connect calls until you do.

To answer a call alert, press the PTT button to make a Direct Connect call to the sender.

To queue a call alert, press

A under Queue.

To clear a call alert, press

A under Clear.

Note: The recent calls list also stores call alerts you have received. They appear as Direct

Connect calls. Call alerts remain in your recent calls list until you delete them or until they reach the end of the list.

Using the Call Alert Queue

When you queue a call alert, it remains in the call alert queue until you make a Direct Connect call to the sender or delete it.

Viewing Call Alerts

1 From the main menu, select Call Alert.

2 Scroll through the list.

25

Call Alerts

Viewing Date and Time

To view the date and time a call alert was received:


2 Scroll to the call alert you want information on.

3 Press m

.

4 Select View.

Responding to Call Alerts in the Queue

After you queue a call alert, you can respond to it by making a Direct Connect call to the sender or sending a call alert to the sender.

Making a Direct Connect Call to the Sender


2 Scroll to the call alert you want to respond to.

3 Press the PTT button to begin the call.

This removes the call alert from the queue.

Sending a Call Alert to the Sender


2 Scroll to the call alert you want to respond to.

3 Press

A under Alert. Ready to Alert appears on the display.

4 Press the PTT button until Alert Successful appears on the display.

26

Deleting Call Alerts

To delete a call alert from the queue:

1 From the call alert queue, scroll to the call alert you want to delete.

2 Press m

.

3 Select Delete.

4 Press

A under Yes to confirm.

To delete all call alerts from the queue:

1 From the call alert queue, press m

.

2 From the call alert menu, select Delete All.

3 Press


Sorting Call Alerts

Tip: You must have at least one call alert in the queue to access this feature.

To sort call alerts by the order they were received:


2 Press m .

3 Select Sort By.

4 Scroll to First on Top or Last on Top.

5 Press

A under Select.

Recent Calls

The recent calls list stores the numbers of the 20 most recent calls you have made and received.

To view the recent calls list:

1 From the idle screen, press the down arrow on the navigation key. -or-

From the main menu, select Recent Calls.

2 Scroll through the list.

If the number of a recent call is stored in Contacts, the name associated with the number appears on the recent calls list.

An icon appears beside the name or number indicating the Contacts type of the number used in the call. See “Contacts” on page 33.

For phone calls, an icon appears to the left of the name or number giving more information about the call:

X A call you made.

W A call you received.

V A missed call. Missed calls appear on the recent calls list only if you have Caller ID.

Note: The recent calls list also stores call alerts you have received. They appear as Direct

Connect calls. Call alerts remain in your recent calls list until you delete them or until they reach the end of the list.

To get more information on a recent call:

1 From the recent calls list, scroll to the call you want information on.

2 Press

A under View. -or-


. Select

View.

This displays information such as the name associated with the call, the number, the date, time, and duration of the call.

Storing Recent Calls to

Contacts

1 From the recent calls list, scroll to the number you want to store.

2 Press

A under Store. -or-

If Store is not one of your options: Press m

.

Select Store.

Tip: If Store is not on this menu, the number is already stored in Contacts.

27

Recent Calls

3 To store the number as a new entry, select [New

Contact]. -or-

To store the number to an existing entry, select the entry.

4 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number. For information on Contacts types, see page 33.

5 If you want to add more information to the entry, follow the applicable instructions in “Creating


6 Press

A under Done.

Deleting Recent Calls

To delete a call:

1 From the recent calls list, scroll to the call you want to delete.

2 Press m

.


4 Press


To delete all calls:

1 From the recent calls list, press m

.

2 Select Delete All.

3 Press


28

Entering Text

You can enter text into your phone using the traditional method of pressing a key several times for each character, or by pressing a key once for each letter while words likely to be the one you want are chosen from a database. You can also enter symbols and numbers into a text field.

In screens that require you to enter text, you see the following icons near the top right corner. These icons tell you which text input mode you are using: l Alpha — Press a key several times for each character.

j Word — Press a key once for each letter while words likely to be the one you want are chosen from a database.

i Symbols — Enter punctuation and other symbols.

k Numeric — Enter numbers.

When you access a screen that requires you to enter text, you start in Alpha mode.

To choose a text input mode:

1 At a screen that requires you to enter text, press m

.

2 A checkmark appears next to the current text input mode. Scroll to the text input mode you want to use.

3 Press

A under Select.

Using Alpha Mode

• Press any key on the keypad to enter the letters, numbers, and symbols on that key. For example, to enter the letter Y, press

9 three times.

• Type a letter then scroll up to make that letter uppercase, or type a letter then scroll down to make that letter lowercase.

• See “Special Function Keys” on page 30 for more information on adding spaces, capitalization, and punctuation.

Using Word Mode

In Word mode, T9 Text Input analyzes the letters on the keypad button you press and arranges them to create words. As you type, T9 Text Input matches your keystrokes to words in its database and displays the most commonly used matching word.

You can add you own words to this database.

Entering a Word

1 Select Word as your text input mode.

29

Entering Text

2 Type a word by pressing one key for each letter.

For example, to type “test” press

8 3 7 8

.

The displayed word may change as you type it.

Do not try to correct the word as you go. Type to the end of the word before editing.

3 If the word that appears is not the desired word, press

0 to change the word on the display to the next most likely word in the database.

Repeat until the desired word appears.

If the desired word does not appear, you can add it to the database.

Adding Words to the Database

1 Select Alpha as your text input mode.

2 Type the word using Alpha mode.

3 Select Word as your text input mode.

4 Press

#

.

The word you typed in Alpha text entry mode is now in the database.

Note: You cannot store alphanumeric combinations, such as Y2K.

Choosing a Language

To change the language of the database:

1 At a screen that requires you to enter text, press m

.

2 Select Languages.

3 Scroll to the language you want for your database.

4 Press

A under Select.

Special Function Keys

Some of the phone’s keys assume different functions while in Alpha or Word mode.

Spaces

Press

# for a space.

Capitalization

Press and hold

# to make the next letter typed uppercase (shift), to make all subsequent letters typed uppercase (caps lock), or to go back to lowercase letters.

30

These icons appear in the top row of your display: m Shift is on.

n Caps lock is on.

When neither of these icons appear, letters typed are lowercase.

Note: Your phone automatically makes the first letter of a sentence uppercase.

Punctuation

Press

1 or

0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want.

Note: Additional punctuation symbols are available in Symbols mode.

Using Numeric Mode

1 Select Numeric as your text input mode.

2 Press the number buttons on your keypad to enter numbers.

Using Symbols Mode

1 Select Symbols as your text input mode.

Using Numeric Mode

A row of symbols appears along the bottom of your phone’s display. Scroll right to view the complete row.

2 Scroll left or right to choose the symbol you want to enter.

3 Press

A under Select.

31

Entering Text

32

Contacts

Contacts stores up to 600 numbers or addresses.

Each Contacts entry can store several numbers or addresses.

Information stored in Contacts is saved on your SIM card.

A Contacts entry contains:

• A name — A name is required if your are storing more than one number or address to the entry; otherwise, it is optional. Typically, this is the name of the person whose contact information is stored in the entry.

• A ring tone — You can assign a ring tone to each entry. This is the sound your phone makes when you receive phone calls or call alerts from any of the numbers stored in the entry.

• A Contacts type — Each number or address stored must be assigned a Contacts type:

A

B

Mobile

Direct

Connect # phone number

Direct Connect number

C

D

E

Work1

Work2

Home phone number phone number phone number

F Email

G Fax email address phone number

H Pager

I Talkgroup phone number

Talkgroup number

J

K

IP

Other

IP address phone number

• A number or address — Each Contacts entry must contain a number or address. This may be any type of phone number, Direct Connect number, Talkgroup number, email address, or IP address.

33

Contacts

Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and

Waits” on page 38.

• A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it.

• A voice name — If you create a voice name for a number, you can then dial that number by saying the voice name into your phone. This icon appears P to the left of the Contacts type icon if a voice name is assigned.

Note: This is an optional feature. See “Optional

Features” on page 86.

Viewing Contacts

To access Contacts:

Press

A under Contcs. -or-

From the main menu, select Contacts. -or-

If you are on a call: Press m

. Select Contacts.

To view entries:

1 From the Contacts list, scroll to the entry you want to view.

2 If an entry has more than one number or address stored, <> surrounds the Contacts type icon.

Scroll left or right to view the icon for each number stored in the entry.

3 When the icon for the number or address you want to view is displayed, press

A under View.

-or-


. Select

View.

4 Scroll to view the other numbers and addresses stored for the entry.

Tip: To view more entries, continue scrolling.

Searching for a Name

To search for a name in Contacts:

1 From the Contacts list, press m

.

2 Select Search.

3 Enter the name you want to see. See “Entering

Text” on page 29.

4 Press

A under Ok.

Your phone finds the name you entered or the nearest match.

34

Showing Only Direct Connect numbers and Talkgroups

To set Contacts to show only entries that contain

Direct Connect numbers and Talkgroup entries:


.

2 Select Filter.

3 With Show DC highlighted, press

A under

Select.

To set Contacts to show all entries:


.

2 Select Filter.

3 Scroll to Show All.

4 Press

A under Select.

Creating Entries

A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details.

After you have entered the number or address,

Contacts type, and any other information you want, you can press

A under Done to save the entry to

Contacts.

To cancel a Contacts entry at any time press, e to return to the idle screen.

Creating Entries

Tip: In some fields that require you to enter information, you can begin entering the information from the keypad instead of pressing

A under Change.

To create a Contacts entry:

1 To access the entry details screen:

Select Contacts > [New Contact]. -or-

From the Contacts list, press m

. Scroll to New.

Press

A under Select.

2 If you want to assign a name to the entry:

With the Name field highlighted, press

A under

Change.

Enter the name. See “Entering Text” on page 29.

When you are finished, press

A under Ok.

3 If you want to assign a ring tone to the name:

With the Ringer field highlighted, press

A under

Change.

Scroll to the ring tone you want to assign. Press

A under Select.

4 To assign a Contacts type to the number or address being stored:

With the Contacts type field highlighted, press

A under Change.

35

Contacts

Scroll to the Contacts type you want to assign.

Press

A under Select.

5 To store a number or address:

With the # field (or ID for an email address, or IP for an IP address) highlighted, press

A under

Change.

Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see “Entering Text” on page 29.

Tip: Press

A under Browse to select a number or address from Contacts, the recent calls list, or Memo.


A under Ok.

6 If you want to assign a Speed Dial number to the number, press

A under Change with the

[Options] field highlighted. See “Assigning

Options”.

7 If you want to add more numbers or addresses to the entry:

Scroll past the information you already entered.

Enter the additional information for the entry using step 2 through step 6. You must assign a name to the entry, if you have not already.

8 Press

A under Done.

Assigning Options

1 If you have not already, press

A under Change with the [Options] field highlighted

2 The default Speed Dial number assigned to a phone number is displayed in the Speed # field.

This is always the next available Speed Dial location.

If you want to assign the phone number to a different Speed Dial location:

With the Speed # field highlighted, press

A under

Change.

Press

A under Delete to delete the current Speed

Dial number.

Enter the new Speed Dial number using the keypad.


A under Ok.

3 When you are finished, press

A under Back.

Storing Numbers Faster

To store numbers to Contacts from the recent call list, see “Storing Recent Calls to Contacts” on page

27.

To store numbers to Contacts from Memo, see

“Memo” on page 39.

36

To store numbers to Contacts from the idle screen:

1 Use the keypad to enter the number you want to store.

2 Press m

.

3 Select Store Number.




5 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number.



7 Press

A under Done.

Editing Entries

1 From the Contacts list, scroll to the entry you want to edit.

2 Press m

.

3 Select Edit. The entry details screen displays.

4 Follow the applicable instructions in “Creating

Entries” on page 35 to edit the various fields.

Editing Entries

Deleting Entries

Delete an Entry

1 From the Contacts list, scroll to the entry you want to delete.

2 Press m

.

3 To delete the entire entry, scroll to Delete

Contact.

4 Press

A under Select.

5 Press


Delete a Number or Address

1 From the Contacts list, scroll to the entry that contains the number or address you want to delete.

2 With the Contacts type field highlighted, scroll left or right to display the Contacts type for the number you want to delete.

3 Press m

.

4 Scroll to Delete Number.

5 Press

A under Select.

6 Press


37

Contacts

Checking Capacity

To see how many numbers are stored in Contacts:


.

2 Select Capacity.

Creating Pauses and Waits

When storing a number, you can program your phone to pause or wait between digits while dialing.

A pause makes your phone pause for 3 seconds before dialing further. A wait makes your phone wait for your response before dialing further.

This feature is useful when using voice mail or other automated phone systems that require you to dial a phone number and then enter an access number.

To program a pause:

Press and hold

* until the letter P appears. The

P represents a 3-second pause.

If you store 17035551235P1234, when you select this number and make a call, your phone dials the first 11 digits, pauses for 3 seconds, then dials the last 4 digits.

If you want a pause longer than 3 seconds, press and hold

* more than once. Each P represents a

3-second pause.

To program a wait:

38

Press and hold

* until the letter W appears. The

W means your phone waits before dialing further.

If you store 17035551235W1234, when you select this number and make a call, your phone dials the first 11 digits and then waits. A message appears asking if you want to send the rest of the digits.

Press

A under Yes to dial the last 4 digits.

Tip: You can create pauses and waits while dialing a number from the keypad. See

“Creating Pauses and Waits While Dialing” on page 75.

International Numbers

When storing a number that you plan to use for international calls, use Plus Dialing:

1 Press and hold

0 for two seconds. A “0” appears, then changes to a “+”.

Note: The network translates the “+” into the appropriate international access code needed to place the call.

2 Enter the country code, city code or area code, and phone number.

For information about making international calls, see

“Making International Calls” on page 75.

Memo

Memo lets you store a number, make a call to that number, and save it to Contacts.

To create a memo:

1 From the main menu, select Memo.

2 Enter the number using your keypad.

3 Press

A under Store.

To view the memo later:


To delete the memo:


2 Press and hold

A under Delete.

3 Press

A under Store.

To edit the memo:


2 Enter the new number.

3 Press

A under Store.

To make a call to the memo number:


2 Press s

.

To store the memo number to Contacts:


2 Press m

.

3 Press

A under Select.




5 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number.



7 Press

A under Done.

39

Memo

40

Nextel Voice Mail

Note: To receive voice mail messages, you must first set up your voice mailbox.

Setting Up Your Voice Mail Box

Using your i205 phone, dial your 10-digit Nextel

Personal Telephone Number (PTN). For example:

7035557777. Follow the system instructions to create a new 4- to 7-digit password, record your name, and record a greeting. When the system says, “Thank you for using Nextel Voice Mail,” your mailbox is set up.

If you are calling from a phone other than your i205, dial your 10-digit Nextel PTN. When you hear the greeting, press the star key to access your voice mail box. The system will prompt you to enter your password. Enter the last seven digits of your Nextel

PTN. For example: 5557777. This is your temporary password.

You are in the main voice mail menu when you hear the options listed below.

• To play your messages, press 1. (This option plays only if you have new or saved messages.)

• To record a message, press 2.

• To change your greeting, press 3.

• To access your personal options, press 4.

If you press

* while you are in a sub-menu, you will go to the previous menu. If you press

**

, you will go to the main voice mail menu. From the main voice mail menu, press # to exit voice mail. At any time, you may end the call by pressing e

.

Playing Messages

When you receive a new voice mail message, you can either listen to it immediately by pressing

A under Call, or later by pressing A under Exit.

These are options available while you are listening to your messages:

• Backup — press 1 .

• Rewind to beginning of message — press

11

.

• Pause or continue the current message — press

2

.

• Fast forward — press

3

.

• Fast forward to end of message — press

33

.

• Play the date and time stamp — press

55

.

These options are available while a message is playing or after it has played:

• Forward the message to another subscriber — press

6

.

• Delete the message — press

7

.

41

Nextel Voice Mail

• Reply to a message — press

8

.

• Save the message — press

9

.

• Skip to the next message — press

#

.

Messages that are not saved or deleted remain in your mailbox as new messages. All messages are automatically deleted after 30 days.

To retrieve deleted messages, press

* 3

. This option only applies to the current voice mail session.

If you end the call, the messages will be permanently deleted.

Important: After exiting the voice mail session, you cannot recover deleted messages.

Changing Your Password

1 From the main voice mail menu, press

4 to access personal options.

2 Press

4 to access personal preferences.

3 Press

1 to modify password.

4 Enter your new password. It must be 4 to 7 digits long.

Note: It is important that you choose a number that is easy for you to remember, but hard for someone else to guess. Passwords using all the same digits, for example

4,4,4,4 or a sequential series of digits,

1,2,3,4, will not be accepted.

42

5 Press

** to return to the main menu.

Note: If you forget your password, contact

Customer Care.

Recording Your Name

When you send, reply to, or copy a message, your name response precedes the message. To record or re-record your name at any time:



2 Press


3 Press

3 to access the record your name option.

4 Press

2 to record your name.

5 Press


Recording Your Active Greeting

You may want to include one or all of the following options in your greeting so that callers will know they are available.

• Press 1 to send a numeric message.

• Press 2 to send an operator-assisted message.

(This option is available only if you are a subscriber of Operator Assisted Messaging.

Contact Nextel Customer Care for more information.)

• Press # to skip the greeting and record a message immediately.

To record or alter your greeting at any time:


3 to change your greeting.

2 Press

1 to play, press

2 to record or re-record, or press

7 to delete your active greeting.

3 Record your greeting and press # when you have finished.

4 Press


Advanced Voice Mail Features

Multiple Greetings

You can create up to five different greetings and designate which greeting will be your active greeting at any given time. The greeting that was recorded during your initial voice mail box setup is greeting 1.

This is your default active greeting.

To record additional greetings:


3 to access the greetings menu.

2 Press

4 to modify greetings.

3 Enter the greeting number you wish to create or modify.

4 Press

2 to record a greeting.

Advanced Voice Mail Features

5 Record your greeting and press

# when you have finished.

6 Press


To select your active greeting:



2 Press

3 to select another greeting to be active.

3 Enter the number of the greeting that you would like to be active. The system will confirm your active greeting number.

4 Press

1 to play your active greeting.

5 Press


Greetings Schedule

You can choose to have your greetings automatically activated based on a pre-determined time schedule. By activating the Greeting Schedule,

Greetings 1, 2, and 3 will automatically play according to the time schedule listed below.

Greeting 1 Evenings and

Weekends

5:00 pm – 7:59 am,

Monday – Friday

24-hours, Saturday and Sunday

43


Greeting 2 Weekday

Mornings

Greeting 3 Weekday

Afternoons

8:00 am – 11:59 am

Monday – Friday

Noon – 4:59 pm

Monday – Friday

To activate the greeting schedule:



2 Press

9 to activate your greeting schedule.

3 Press


Note: The greeting schedule, when on, will override any other greeting that you may set as active. If a greeting is not recorded, a system standard greeting will be played.

Automatic Playback

By default, the playback mode of your voice mail service is set to normal. This feature automatically plays and saves new messages when you log in. To activate automatic playback:



2 Press


3 Press

2 to access playback preferences.

4 Press

2 to switch between automatic and normal playback.

44

5 Press


Changing the Playback Order of Messages

You can select the order in which you want unheard messages to be played. You may listen to the last received message first, or you may listen to the first received message first. To select the order in which new messages should be played:



2 Press


3 Press

2 to access playback preferences.

4 Press

1 to switch between the playback orders.

5 Press


Recording, Forwarding, and Replying to

Messages

These functions allow you to record and send, reply to, or forward a message to an assigned destination address or group list number. If you record a complete or partial message, but do not send it,

Nextel Voice Mail service will refer to this message as an “in preparation” message.

To record and send a message:


2 to record a message.

2 Record your message and press

# to end the message.

3 Press

9 at the prompt to indicate that you want to send the message or press

5 for delivery options.

4 Enter the mailbox number and/or group list number(s). (A mailbox number is the 10-digit

Nextel PTN of a Nextel customer. The Nextel customer must be in your local calling area. The name of the recipient plays if it is recorded.)

5 Press

# to send.

6 Press


Note: You can only send messages using this method to Nextel customers in your home market.

Delivery Options

After you have created a message, you can assign the message to a category before you send it. Below is a list of the options that can be applied to a message:

• Urgent — Recipient will hear this message before other messages.

• Private — Recipient cannot copy the message to another mailbox or phone number.


• Notification of Non-Delivery — You will be notified if the recipient has not listened to your message by a certain date and time.

• Future Delivery — You can specify a time and date (up to three months in advance) for the message to be delivered.

Note: All dates must have digits in the MM/DD format (2 digits for the month and 2 digits for the date). For example, January 2nd would be 0102.

Important: Once a message has been sent for future delivery, it cannot be retrieved or deleted.

To set a special delivery option:

1 After recording your message, but before sending it, press

5 for delivery options.

2 Press the number that corresponds with the desired delivery option:

• Press

1 for urgent.

• Press

2 for private.

• Press

3 for notification of non-delivery. At prompt, specify time and date.

• Press

4 for future delivery of messages. At prompt, specify time and date.

• Press

9 to send the message immediately.

45


3 The list of options will be presented again. Select an additional option or press

9 to send the message.

4 Enter the destination mailbox or group list number of the recipient(s).

5 Press

# to send.

6 Press


Working With Group Lists

This feature enables you to create a list and assign it a unique name. Then, you can add mailbox numbers, group lists, or individuals. Once you create a list you can send a voice message to everyone on the list by entering the group list number. You can have up to 40 group lists. Each list can hold up to 50 addresses.

To set up a group list:

1 From the main voice mail menu, press 4 to access personal options.

2 Press

2 to access your Group Lists.

3 Press

2 to create a Group List.

4 Enter the 1- or 2-digit group list number and press

#

.

5 Record a name for the list and press

#

.

6 Select group members by mailbox number, group list, or name.

46

7 Press

# to save all entries added to the list.

8 Press


To modify a group list:



2 Press

2 to access group lists.

3 Press

4 to modify a group list. Enter the number of the group list you want to modify.

4 Press

1 to add a new recipient.

5 Press # to save your changes.

6 Press


Deleting a group list:



2 Press

2 to access group lists.

3 Press

3 to delete a group list.

4 Enter the number of the group list you want to delete. The system will play the name of the group list.

5 Press

# to delete the list.

6 Press ** to return to the main menu.

Message Forwarding

Note: You can only forward messages to Nextel customers in your home market.

This feature allows you to program your phone to automatically forward incoming messages to another mailbox. There are two types of forwarding: notified and silent. Notified forwarding prompts the caller that the message will be forwarded. Silent forwarding does not prompt the caller that the message will be forwarded.

To modify forwarding options:



2 Press 5 to modify forwarding options.

3 Select the applicable option below:

• To create a forwarding number, press

2

.

• If you have already created a forwarding number, press

2 to modify the number.

• To enable or disable message forwarding, press

3

.

• To change the forwarding type, press

2

.

4 Press



47


48

Messages

To access your voice mail messages, text and numeric messages, Net alerts, and any other types of messages you are able to receive, go to the message center:

1 Press

A under Mesg. -or-

From the main menu, select Messages.

2 Scroll to the type of message you want to access.

3 Press

A under the display option on the left.

The message center shows how many messages you have of each type. You can listen to, read, or delete these messages.

Note: In order for you to access voice mail through the message center, there must already be a message in your voice mail box. If there is no message, you must access voice mail by dialing into your voice mail box using your PTN.

Message Notifications

When you receive a message, your phone notifies you with text on the display and a notification tone or vibration. You can access the message or dismiss the notification.

If you dismiss the notification, the message is not deleted. It can be accessed through the message center.

If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message or dismiss the alert.

If you are on a call when you receive a message, your phone may sound a notification tone during the call or after you end the call, depending on how you set your notification options.

Setting Notification Options

To control whether your phone sounds message notification tones while you are on phone calls:

1 From the main menu, select Settings > Phone

Calls > Notifications.

2 Choose the option you want:

• Receive All — Tones sound during calls for all types of messages.

• Msg Mail Only — Tones sound during calls for mail messages; tones for all other types of messages are held until you end calls.

• Delay All — Tones for all types of messages are held until you end calls.

Note: Delay All is the default setting.

49

Messages

3 Press

A under Select.

Tip: To set notification options during a call: Press m

. Select In Call Setup > Notifications.

Voice Mail

When you receive a voice mail message, New

Voice Mail Message appears on the display.

To call Nextel’s voice mail system and listen to the message:

Press A under Call.

To dismiss the message notification:

Press

A under Exit. This icon y appears on the display, reminding you that you have a new message.

Sending Unanswered Calls to Voice

Mail

To send a phone call to voice mail instead of answering it:

Press e

. -or-

Press

A under No.

If the caller leaves a message, this icon y appears on the display, reminding you that you have a new message.

50

Text and Numeric Messages

The phone’s display refers to text and numeric messages as Text Messages.

These messages can be up to 140 letters or 20 digits long. You can store up to 16 of these messages. Each message is stamped with the date and time it was left.

If your phone is powered off when you receive a message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area.

Your phone attempts to deliver these messages for up to 7 days.

Tip: While reading a text and numeric message that contains a phone number, you can press s to call that number.

Receiving a Message

When you receive a text and numeric message,

New Text Message appears on the display.

To view the message:

1 Press

A under Read.

2 If the message fills more than one screen, scroll to read it.

3 To keep the message, press

A under Save. -or-

To delete the message, press

A under Delete.

To dismiss the message notification:

Press A under Back. This icon w appears on the display, reminding you that you have a new message.

Reading from the Message Center

1 From the message center, select Text Msgs.

2 Scroll to the message you want to read.

3 Press

A under Read.

4 If the message fills more than one screen, scroll to read it.

5 To keep the message, scroll to the end of the message and press

A under Save. -or-

To delete the message, press

A under Delete.

Net Alerts

Net alerts are text and numeric messages sent from:

• Your i205 phone

• www.nextel.com

• Any email application

Net Alerts

Note: Your phone's SMS address is your

[email protected]. Your phone's

Two-Way Messaging address is your

[email protected].

When you receive a Net alert, a notification appears on the display.

If you dismiss the notification, this icon w appears on the display, reminding you that you have a new message.

Deleting Net Alerts

1 From the message center, select Net Alert.

2 Press

A under Goto.

3 Scroll to the message you want to delete.

4 Press m

.


6 Press


51

Messages

52

Call Forwarding

Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call.

You can forward phone lines 1 and 2 independently.

Forwarding All Calls

When you set your phone to forward all calls, an icon appears in the top row of the display:

G Phone line 1 is active; calls to phone line 1 are being forwarded.

H Phone line 1 is active; calls to phone line 2 are being forwarded.

I Phone line 1 is active; calls to phone lines 1 and 2 are being forwarded.

J Phone line 2 is active; calls to phone line 1 are being forwarded.

K Phone line 2 is active; calls to phone line 2 are being forwarded.

L Phone line 2 is active; calls to phone lines 1 and 2 are being forwarded.

To forward all calls:

1 From the main menu, select Call Forward.

2 Press

A under Change.

3 Select All Calls.

4 Scroll to To.

5 Press

A under Change.

6 If you specified a forwarding number for all calls before, this number displays. Press

A under

Change.

To forward calls to this number, press A under

Ok. -or-

To delete this number, press and hold

A under

Delete.

7 To enter the number you want to forward calls to:

Enter the number using your keypad. -or-

Press A under Search. Select Contacts, Recent

Calls, or Memo. Select the number you want to enter.

8 Press

A under Ok.

All your calls are now forwarded to the number you specified.

Tip: In some fields, you can select an option by scrolling left or right instead of pressing

A under Change.

53

Call Forwarding

Turning Off Call Forwarding

If you don’t want all your calls forwarded, turn the feature off:


2 Press

A under Change.

3 Select All Calls.

4 Scroll to To.

5 Press

A under Change.

6 Scroll to Off.

7 Press

A under Select.

All your calls are now sent to your phone.

Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail.

Forwarding Missed Calls

You can specify a forwarding number for each type of missed call:

• If Busy — Your phone is on a call or transferring data.

• If No Answer — You do not answer on the first 4 rings.

• If Unreachable — Your phone is out of coverage or powered off.

54

Note: If you want a type of missed call sent to voice mail, the call forwarding number for that type of missed call must be your voice mail access number.

To forward missed calls:


2 Press

A under Change.

3 Select Detailed.

4 Scroll to If Busy to specify a forwarding number for calls received when your phone is busy.

5 Press

A under Change.

6 If you specified a forwarding number for this type of call before, this number displays. Press

A under Change.

To forward calls to this number, press

A under

Ok and go to step 9. -or-

To delete this number, press and hold A under

Delete.

7 To enter the number you want to forward this type of call to:


Press

A under Search. Select Contacts, Recent


8 Press

A under Ok.

9 Repeat step 4 through step 8 for No Answer and

If Unreachable.


A under Back.

Viewing Call Forwarding

Settings


2 With To highlighted, press m

.

3 Select Retrieve Status.

Viewing Call Forwarding Settings

55

Call Forwarding

56

Ring Tones

To set the ring tone your phone makes when you receive phone calls, message notifications, or call alerts:

1 From the main menu, select Ring Tones.

2 Make sure VibeAll is set to Off.

3 Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound; Silent sets your phone to neither vibrate nor make a sound.

Tip: Highlighting a ring tone lets you hear it.

4 Press

A under Assign.

5 Scroll to the feature you want to assign the ring tone to.

6 Press

A under Select.

Tip: A checkmark next to a feature means the current ring tone has been assigned to it. To remove the assignment: Scroll to the feature.

Press A under Select.

7 To assign the ring tone to other features, repeat step 5 through step 6.


A under Done.

Setting Your Phone to Vibrate

You can set your phone to vibrate instead of making a sound when you receive all phone calls, Direct

Connect calls, Group Connect calls, messages notifications, and call alerts.

1 From the main menu, select Ring Tones >

VibeAll.

2 Scroll left or right to set VibeAll to On.

Tip: Pressing the volume controls to turn down the volume as far as possible sets VibeAll to

On.

To set your phone to vibrate instead of making a sound for some features but not others:



3 Scroll through the list of ring tones to Vibrate.

4 Press

A under Assign.

5 Scroll to the feature you want to set to make no sound.

Note: To set ring options for Direct Connect calls and Group Connect calls, see “Setting Your

Phone to Not Ring” on page 83.

6 Press

A under Select.

7 To assign Vibrate to another feature, repeat step 5 through step 6.

57

Ring Tones


A under Done.

These icons indicate how the ringer is set.

u DC/GC speaker set to off.

v The phone always vibrates instead of ringing.

M The phone does not ring for phone calls.

These icons may appear at the same time.

Assigning Ring Tones to

Contacts

You can set the ring tone your phone makes when you receive phone calls or call alerts from someone you have stored in Contacts.



3 Scroll through the list of ring tones to the one you want to assign. Highlighting a ring tone lets you hear it.

4 Press

A under Assign.

5 Select A Contact.

6 Scroll to the Contacts entry you want to assign the ring tone to.

7 Press

A under Select.

58

Ring and Vibrate

To set a your phone to ring and vibrate when you receive phone calls or call alerts:



3 Scroll through the list of ring tones and select the one you want to assign.

4 Press m

.

5 Select Assign w/Vibe.

6 Select the feature you want to set to ring and vibrate.


A under Done.

This icon S appears on the display.

Viewing Ring Tone

Assignments



3 Highlight any ring tone.

4 Press m .

5 Select Overview.

6 Scroll to view ring tones assigned to features and

Contact entries.

Downloading More Ring Tones

If you want to use other ring tones, you can download them into your phone for a fee. Go to www.nextel.com/idenupdate for a selection of custom ring tones and downloading instructions. A data cable is required for downloads.

Note: Ring tones purchased from this web site may be downloaded only once. If you delete a ring tone from your phone, you must purchase it again to download it again.

Managing Memory

To view the amount of memory available for custom ring tones:



3 Highlight any ring tone.

4 Press m

.

5 Select Memory Usage.

Deleting custom ring tones frees memory.

Downloading More Ring Tones

Deleting Custom Ring Tones

To delete a custom ring tone:



3 Scroll to the ring tone you want to delete.

4 Press m

.


6 Press


59

Ring Tones

60

GPS Enabled

Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature. For example, GPS location fixes are often difficult to obtain indoors, in covered locations, between high buildings, or in other situations where you have not established a clear broad view of the sky. SEE: “IMPORTANT: Things to Keep in Mind” on page 61.

When you make a 911 emergency call, the GPS feature of your phone can help emergency personnel locate you if your phone has adequate access to GPS satellite signals and your emergency response center is equipped to process such information.

You can also use the GPS feature to view your approximate location. Location information appears on the phone’s display.

If your phone is connected to a laptop computer or similar device, software running on that device can request your location. To protect your privacy, you can control whether these requests are granted.

IMPORTANT: Things to Keep in

Mind

If you are using the GPS feature of your phone while driving, please give full attention to driving and to the road.

Where adequate signals from multiple satellites

are not available (usually because your GPS antenna cannot establish a view of a wide area of open sky), the GPS feature of your phone WILL

NOT WORK. Such situations include but are not limited to:

• In underground locations

• Inside of buildings, trains, or other covered vehicles

• Under any other metal or concrete roof or structure

• Between tall buildings or under dense tree-cover

• Near a powerful radio or television tower

61

GPS Enabled

• When your GPS antenna is covered (for example, by your hand or other object) or facing the ground

• In temperature extremes outside the operating limits of your phone

Walking or driving very slowly may also substantially reduce GPS performance.

Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Therefore, in any 911 call, always report the location to the emergency response center if you can and if you cannot, remain on your phone for as long as the emergency response center instructs you.

Even where adequate signals from multiple satellites are available, your GPS feature will only provide an approximate location, often within 150 feet (45 meters) but sometimes much further from your actual location. Advice on how to improve GPS performance is provided in

“Enhancing GPS Performance” on page 64.

While the GPS feature of your phone can be a valuable navigational aid, it does not replace the need for careful navigating and good judgment.

Never rely solely on one device for navigation.

Remember that the accuracy of the location

62 information and the time needed to obtain it will vary depending on circumstances, particularly the ability to receive signals from adequate numbers of satellites.

On emergency calls, your phone uses assistance information from the phone network to improve the speed and accuracy of your phone’s location calculation: if such assistance information becomes unavailable, it may reduce the speed and accuracy of the location calculation.

The satellites used by the GPS feature of your phone are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense GPS user policy and the Federal Radionavigation Plan. These changes may affect the performance of the GPS feature of your phone.

Making an Emergency Call

Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.

When you make an emergency 911 call, the GPS feature of your phone begins to seek information to calculate your approximate location. It will take the

GPS feature of your phone some time to

determine your approximate location. Even where your phone has good access to sufficient

GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center.

In some cases, your local 911 emergency response center may not be equipped to receive

GPS location information. For this reason, and because the GPS location information reported is only approximate or may not be available in your location (see “IMPORTANT: Things to Keep in

Mind” on page 61), always report your location to

the 911 operator you speak to when making an emergency call, if able, just as you would when using a phone without GPS capabilities.

Note: If you are concerned about whether your local 911 emergency response center is equipped to receive GPS location information, contact your local authorities.

In general, if your phone has access to signals from more GPS satellites, your location will be determined faster and more accurately than if your phone has access to signals from fewer GPS satellites.

Viewing Your Approximate Location

If your phone does not have adequate access to

GPS satellites signals, the location of the nearest cell tower in contact with your phone is automatically made available to the emergency response center, if the center has the capability to receive such information.

See “Enhancing GPS Performance” on page 64 for information on how to help your phone determine your location.

Viewing Your Approximate

Location

1 From the main menu, select GPS > Position.

2 Scroll to view the entire screen.

This displays the following information about the last time your location was calculated:

• The time (as Greenwich Mean Time) and date that the location was last calculated

• The approximate location, expressed as latitude and longitude

• The estimated accuracy of the calculated location. This estimate of accuracy is only a very rough estimate and may vary substantially from the actual accuracy of the approximate location information reported.

63

GPS Enabled

• The number of satellites used to calculate the location. In general, more satellites make for better accuracy.

To calculate your location again:

Press

A under Rfrsh.

It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites.

For tips on getting the best location calculation, see

“Enhancing GPS Performance” on page 64.

The Position screen displays the updated information.

To cancel a location calculation before it is completed:

Press A under Cancel to return to the Position screen. -or-

Press e to return to the idle screen.

Each time approximate location of your phone is calculated, the latest location information is stored in your phone and remains there even when your phone is powered off. You will see this information the next time you view the Position screen.

If you received a phone call or alert while attempting to determine your location, the Position screen will disappear, but your phone will continue attempting to determine its location. If it is successful, the new location information will be displayed the next time you view the Position screen.

Enhancing GPS Performance

Sometimes the GPS feature of your phone may be unable to complete a location calculation successfully. If this happens when you are making an emergency call, the location of the nearest cell tower in contact with your phone is made available to the appropriate emergency response center if the center has the capability to receive such information. If this happens when you are trying to view your location on the phone’s display, you will see a message indicating that your phone cannot access satellites.

To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location:

64

• Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.

• Hold your phone to enhance reception. Signals from GPS satellites are transmitted to your GPS antenna, which is inside the back of your phone, opposite the earpiece, above the label with your service provider’s name on it. Hold your phone away from your body, giving the antenna clear access to satellite signals. Do not cover the antenna area with your fingers or anything else.

GPS antenna area

Updating Satellite Almanac Data

• Stand still. If possible, stand still until your phone is finished determining your location. Moving your phone at a walking pace while your phone is calculating your approximate location may substantially decrease GPS performance.

• In a car. When using the GPS Enabled feature in a car, position your phone so that the GPS antenna has good access to GPS signals through the car’s windows. Typically, the GPS antenna has best access to GPS signals in a car when placed near a window.

Note: Although moving your phone at a walking pace decreases GPS performance, moving it at the speed of a moving car does not.

• Stay in network coverage. Depending on who your service provider is, the network will provide your phone with information that helps determine your location more quickly and accurately.

Updating Satellite Almanac

Data

Another way to keep the GPS feature of your phone working well is to keep your satellite almanac data up to date.

65

GPS Enabled

The United States government maintains an almanac of data about where GPS satellites are as they orbit the Earth. This information is available to your phone. Keeping your satellite almanac up to date helps your phone determine your location more quickly.

The almanac contains information about the location of satellites, their operational status, and other satellite information. Keeping this information updated enhances the performance of your GPS feature. In most cases, your phone will be able to get a fix in strong satellite signal conditions with outdated almanac data, but it may take longer.

Note: When you make an emergency call, your phone does not rely upon the almanac to determine your location.

If your satellite almanac data is out of date, your phone may prompt you to update it. Follow the instructions that appear on the phone’s display. You may be asked to go to a web site or call a customer care number.

Setting Privacy Options

Your phone’s GPS privacy options control whether software applications may view the location of your phone.You may set your phone to one of these GPS privacy options:

66

• Restricted — No software applications may view the location of your phone. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.

• Unrestricted — All applications may view the location of your phone, without notifying you.

• By Permission — When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.

Note: Privacy options do not apply to the transmission of location information during emergency 911 calls.

To set your GPS privacy options:

1 From the main menu, select GPS > Privacy.

2 If your GPS PIN security feature is enabled, enter your GPS PIN. (See “Setting the GPS PIN

Security Feature” on page 66 for more information.)

3 Scroll to the privacy setting you want.

4 Press

A under Select.

Setting the GPS PIN Security Feature

To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN.

When you receive your phone, the GPS security feature is turned off, so you do not have to enter a

GPS PIN to access your GPS privacy options. If you turn this feature on, you will be required to enter a

GPS PIN to access your GPS privacy options.

To turn the GPS Enabled security feature on or off:


> GPS PIN.

2 Scroll to On or Off.

3 Press

A under Select.

4 Enter the current GPS PIN.

Note: When you receive your phone, your GPS

PIN is 0000.

5 Press

A under Ok.

To change your GPS PIN:


> Change Password > GPS PIN.

2 Enter the current GPS PIN.

Note: When you receive your phone, your GPS

PIN is 0000.

3 Press A under Ok.

4 Enter the new 4- to 8-digit GPS PIN.

5 Press

A under Ok.

6 Enter the new 4- to 8-digit GPS PIN to confirm.

Using GPS with Map Software

7 Press

A under Ok.

Using GPS with Map Software

You can use the GPS feature of your phone to provide approximate location data to a laptop computer or similar device that is running interactive map software such as that made by DeLorme or

Microsoft. This way, if your phone has good access to GPS signals, your approximate position on a map can be made available as you travel in a vehicle.

To do this, connect your phone to your laptop (or other device) with a data cable and set your phone to transmit data (see “Getting Started” on page 68).

Your phone then provides your approximate location to the device running the map software, which displays your location on a map. Your phone provides an updated location every second and the map software displays your changing location on its map.

See “Enhancing GPS Performance” on page 64 for more details on obtaining good location information.

Note: Because your phone is continuously determining your location, using the GPS feature of your phone with map software uses the phone’s battery power quickly.

67

GPS Enabled

Software Compatibility

Your phone sends location information to your laptop or other device using the standard National

Marine Electronics Association (NMEA) format.

Your phone supports output messages in

NMEA-0183 format and supports the following

NMEA-0183 sentences: GGA, GLL, GSA, GSV,

RMC, and VTG.

The map software running on your laptop or other device must support NMEA 3.0.

Getting Started

To connect your phone to your laptop or other device:


connector cover

2 With the phone’s display facing up, insert the data cable’s connector into the accessory connector, until you hear a click.

3 Insert the data plug into the COM port of your laptop or other device.

Make sure no other application is using the COM port selected.

Make sure the COM port settings of your laptop or other device are set to the following:

• Bits per second: 4800

• Data bits: 8

• Parity: None

• Stop bits: 1

• Flow control: Hardware

68

To set your phone to send location information to your laptop or other device:

1 From the main menu, select GPS > Interface.

2 With NMEA OUT highlighted, press

A under

Change.

3 Scroll to On.

4 Press

A under Select. Your phone is now sending location data to your laptop or other device.

To stop your phone from sending location data to your laptop or other device:

Set NMEA OUT to Off.

Each time you power your phone on, NMEA OUT is automatically set to Off.

Using GPS with Map Software

69

GPS Enabled

70

Nextel Online

®

Services

You can use your phone’s Net feature to access a suite of wireless data products known as Nextel

Online (NOL) services. Services include Two-Way

Messaging, Web and Premium Web, Address Book,

Mobile Email, and wireless access to AOL ® Instant

Messenger TM .

With the exception of the basic Two-Way Messaging service, Nextel Online* services require the activation of a Nextel Online service plan. To order, call 1-800-NEXTEL6 or contact your Nextel sales representative.

* Nextel Online is only available in the continental

United States.

NOL Services

• Two-Way Messaging — Discretely send and receive text messages via your Nextel phone, any email address, or www.nextel.com. There is a nominal charge for each message sent and received. You also have the option of subscribing to the Two-Way Messaging package for greater functionality and unlimited messaging.

• Web — access the wireless Internet from your

Nextel phone.

• Premium Web — access any site on the wireless

Internet, conduct topic and keyword searches, bookmark sites and applications, and customize your phone's browser menu.

• Address Book — program your Contacts from the

Internet.

• Mobile Email — access and send email from your

Nextel phone.

• AOL ® Instant Messenger TM — send and receive instant messages in real–time through a handset-based interface.

Accessing NOL Services From

Your Phone

You must first enable security on your phone to receive NOL services. See “Enabling Over-the-Air

Security” on page 6.

1 Press m to access the main menu and select Net.

Your NOL home page displays.

2 Choose the service you want to access.

To access a Two-Way Messaging Service:

Select the messaging application from the Net menu.

71

Nextel Online ® Services

To access the Web:

Select Web Sites, Marketplace, or Search

To access Address Book:

Select Business Tools > Address Book

To access Mobile Email:

Select Email & More > Mobile Email

To access AOL ® Instant Messenger TM :

Select Email & More > AIM

Note: Many screens will require you to enter text.

For information on entering text, see

“Entering Text” on page 29.

Navigation Keys

• Home — Press e to return to your home page.

Tip: Press e twice to return to your phone's idle screen.

• Back — Press

* to return to a previous screen.

• Scroll — A scroll bar on the left of the phone’s display indicates that additional text can be viewed. Scroll using the navigation key.

Tip: While navigating through Nextel Online screens, a number may appear to the left of the application or topic you want to access.

Press the corresponding number on the keypad for quicker access to that application or topic.

When transmitting highly personal or sensitive data, such as a credit card number, this icon E appears, indicating that the data is encrypted during transmission.

Note: You may be asked to (re)enable security as

Nextel adds new services or upon your return to the U.S. after traveling.

For more information and multimedia demos, go to www.nextel.com. You can also get one page service-specific guides called Customer Quick Start

Guides and other instruction for Nextel Online services at www.nextel.com.

72

Advanced Calling

Features

Call Waiting

Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call.

If you are on a call and receive a second call, your phone emits a tone and displays a message saying you are receiving a second call.

To accept the second call and put the active call on hold:

Press

A under Yes.

To accept the second call and end the active call:

1 Press e

.

Your phone rings with the second call.

2 Answer the second call.

To decline the second call:

Press

A under No. If you subscribe to voice mail, the call is forwarded to your voice mail box, unless you set Call Forward for If Busy to a different number.

Switching Between Calls

When you accept a second call, the display shows the name or number of each call, with an icon indicating which call is active:

Y Phone call is active.

Z Phone call is on hold.

To make the call on hold active and put the active call on hold:

Press

A under Switch.

Turn Off Call Waiting

To turn off Call Waiting during a call:

1 Press m

.

2 Select In Call Setup > Call Waiting.

3 Press

A under Change.


Tip: To turn Call Waiting back on while still on the call: Scroll to On.

5 Press

A under Select.

73

Advanced Calling Features

To turn off Call Waiting for the next call you make or receive:


Calls > Call Waiting.

2 Press

A under Change.


4 Press

A under Select.

Call Waiting is turned back on when you end the call.

Call Hold

Call Hold lets you put an active call on hold and make a second call.

To put a call on hold:

1 While on an active call, press m

.

2 Scroll to Hold.

3 Press

A under Select.

4 If you want to make the call active again, press

A under Resum.

To make a second call while a call is on hold:

1 Enter the number you want to call.

Tip: To enter the number from Contacts: Press m

.

Select Contacts.


74

To end the second call and make the call on hold active again:

Press e

.

To make the call on hold active and put the active call on hold:

Press

A under Switch.

3-Way Calling

3-way calling lets you combine 2 phone calls into one. All 3 people in the call can speak to and hear each other.

To make a 3-way call:

1 Place or receive a phone call.

2 While the call is active, press m

.

3 Scroll to 3 Way.

4 Press

A under Select. This puts the call on hold.

5 Enter the second phone number you want to call.

Tip: To enter the number from Contacts: Press m

.

Select Contacts.


7 While the second call is active, press m

.

8 Scroll to 3 Way.

9 Press

A under Select.

Both calls are now active and appear on the display.

Creating Pauses and Waits

While Dialing

You can enter a pause or wait while dialing a number. For more information on pauses and waits, see “Creating Pauses and Waits” on page 38.

To create a pause while dialing a phone number:

1 From the keypad, enter the digits you want to occur before the pause.

2 Press m

.

3 Select Insert Pause.

4 Enter the digits you want to occur after the pause.

To create a wait while dialing a phone number:

1 From the keypad, enter the digits you want to occur before the wait.

2 Press m

.

3 Select Insert Wait.

4 Enter the digits you want to occur after the wait.

Making International Calls

Your service default is “International Calls

Restricted.” Contact Nextel Customer Care to obtain international dialing access.

Creating Pauses and Waits While Dialing

Calls placed between the United States and Canada do not require an international access code.

Plus Dialing lets you place an international call to most countries without entering the local international access code.

1 Press and hold

0 for two seconds. A “0” appears, then changes to a “+”.

Note: The network translates the “+” into the appropriate international access code needed to place the call.

2 Enter the country code, city code or area code, and phone number.

Setting One Touch Direct

Connect

One Touch Direct Connect sets your phone to call the most recent Direct Connect number on the recent calls list, or a Direct Connect number you choose, every time you press the PTT button.

To set your phone to call the most recent Direct

Connect number on the recent calls list:

1 From the main menu, select Settings > DC/GC

Options > One Touch DC.

2 Scroll to Last Call.

3 Press A under Select.

75


To set your phone to call a Direct Connect number you choose:


Options > One Touch DC > Assigned Number.

2 To enter the Direct Connect number you want your phone to call every time you press the PTT button:


Press

A under Search. Select Contacts, Recent


Tip: If you are entering a Talkgroup number, enter

# before the number.

3 Press

A under Ok.

To turn off One Touch Direct Connect:


Options > One Touch DC.


3 Press

A under Select.

Group Connect

TM

Calls

A Group Connect call is a call made to all members of a Talkgroup at once. A Talkgroup is a predetermined group of up to 25 Nextel customers.

76

Before you can make or receive Group Connect calls, a Talkgroup must be established. After the

Talkgroup is established, you must join the

Talkgroup. See “Joining a Talkgroup” on page 8.

Making Group Connect Calls

1 Press

#

. Then enter the Talkgroup number using the keypad. -or-

Choose the Talkgroup name from Contacts or recent calls list.

2 Proceed as if making a Direct Connect call.

Receiving Group Connect Calls

To answer a Group Connect call:

Proceed as if answering a Direct Connect call.

Only one person at a time may speak on a Group

Connect call.

The Direct Connect number or name of the person who is speaking will appear on the display below the Talkgroup number.

Turning off Group Connect Calls

To control whether you hear Group Connect calls to your Talkgroup:


Options > Tkgrp Silent.

2 Press

A under Change.

3 Scroll to On if you don’t want to hear Group

Connect calls to your Talkgroup. -or-

Scroll to Off if you want to hear Group Connect calls to your Talkgroup.

4 Press

A under Select.

Call Timers

Call timers measure the duration of your phone calls, Direct Connect or Group Connect calls, and circuit data use, as well as the number of Kilobytes sent and received by your phone:

• Last Call — displays the duration of your most recent phone call.

• Phone Reset — keeps a running total of your phone call minutes, until you reset it.

• Phone Lifetime — displays the total minutes of all your phone calls.

• DC/GC Reset — keeps a running total of all of your Direct Connect and Group Connect call minutes, until you reset it.

• DC/GC Lifetime — displays the total minutes of all your Direct Connect and Group Connect calls.

• Circuit Reset — keeps a running total of all of your circuit data use, until you reset it.

Call Timers

• Circuit Lifetime — displays the total minutes of all of your circuit data use.

• Kbytes Reset — keeps a running total of the number of Kilobytes sent and received by your phone, until you reset it.

To view or reset a timer:

1 From the main menu, select Call Timers.

2 Select the feature you want to view or reset.

3 To view a feature without resetting: Press

A under Done when you are finished viewing. -or-

To reset a feature: Press

A under Reset. Press


Note: The values displayed by Call Timers should not be used for billing. Call timers are estimates only.

77


Using Your Phone as a Modem

To use your phone as a modem with a laptop, handheld device, or desktop computer:


.

2 With the phone’s display facing up, insert a data cable’s connector into the accessory connector, until you hear a click connector cover

3 Insert the data plug into the COM port of the other device.

When used as a modem, your phone has these data transfer modes:

• Circuit data — used for sending and receiving faxes and for transferring large files

• Packet data — used for small file transfers such as email

78

To use these services, you must install the iDEN

Wireless Data Services software (available separately) and subscribe to a Nextel Wireless Web access plan. computer and your i205 phone for packet and circuit data call s, refer to the Nextel Online ® on www.nextel.com.

Making TTY Calls

To use your phone to make phone calls using a teletypewriter (TTY) device:

1 Connect one end of a 2.5mm cable into the audio jack on your phone. Connect the other end of the cable to your TTY device.

2 Make sure that your phone’s TTY feature is on and select the TTY mode you want to use.

3 Use your phone to enter phone numbers and make calls.

When you make a TTY call, these icons appear on the phone’s display:

N Phone call is active.

O Phone call is on hold.

TTY device features such as Turbo-Code,

High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone.

Making TTY Calls

Turning On the TTY Feature

Your phone’s TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the

TTY baud rate. To make sure the TTY feature is on:

From the main menu, select Settings > Phone

Calls > TTY. This field must say On.

Choosing a Mode

Your phone supports these TTY modes:

• TTY — You type and read text on your TTY device.

• VCO (Voice-Carry-Over) — You speak into your phone and read text replies on your TTY device.

• HCO (Hearing-Carry-Over) — You type text on your TTY device and listen to voice replies on your phone speaker.

To change mode while not in a call:


Calls > TTY > Type.

2 Press

A under Change.

3 Scroll to the TTY mode you want.

4 Press

A under Select.

When you make a TTY call, the call begins in the

TTY mode you last selected.

79


To change mode during a call using your phone:

1 Press m

.

2 Select TTY > Type.

3 Select the mode you want.

To change mode during a call using your TTY device, issue one of the following commands:

• “VCO please” — to select VCO mode

• “HCO please” — to select HCO mode

• “HCO off please” — to turn off HCO mode

Important: When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear. (For information on setting the volume of your phone speaker, see “Setting the

Volume” on page 83.)

Changing the TTY Baud Rate

By default, your phone’s TTY baud rate is set to

45.45, the baud rate required for TTY calls within the

U.S. To make calls outside the U.S., set your TTY baud rate to 50.0.

To change the TTY baud rate:


Calls > TTY > Baud.

80

2 Press

A under Change

3 Scroll to the baud rate for your location.

4 Press

A under Select.

Special Dialing Codes

Non-Emergency Numbers

Nextel supports many “non-emergency” numbers

(such as #77, 311,...) provided by local and state governments. These numbers are used to report non-emergency incidents. If the situation includes imminent danger or loss of life, you should dial 911.

Telecommunications Relay Service

Nextel supports services for communicating with speech and/or hearing impaired individuals. You can dial 711 to reach a local Telecommunications Relay

Center. You will then be connected to your destination number. Relay service works through a

Communications Assistant who reads messages typed into a TDD/TTY device by a speech or hearing impaired individual to you. The Communications

Assistant then types your spoken messages to the hearing or speech impaired individual.

Telecommunications Relay Service is available 24 hours a day, seven days a week, and every call is strictly confidential.

Note: Using 711 to reach Telecommunications

Relay Service may not be available in all areas.

Additional Phone Features

Contact Nextel Customer Care to obtain these services or for additional information:

Note: Some services are not available outside of the continental United States.

Caller ID

Your phone automatically displays the phone number or name (if the 10-digit phone number is stored in your Contacts) of the person calling

(unless blocked by the caller), enabling you to decide whether to take the call or forward it to voice mail.

Caller ID information is not available on all calls.

Per-Call Blocking

You can block delivery of your phone number to other Caller ID units for a single phone call:

Press

* 6 7 before dialing the call.

Your Nextel phone number cannot be blocked from calls made to 911, 800, 855, 866, 877, 888, or other toll- free phone numbers.

Additional Phone Features

Per-Line Blocking

You can permanently block delivery of your phone number on every call you make.

To disable on a per-call basis:

Press

* 8 2 before dialing the call.

Alternate Line Service

You can have two different phone numbers on the same handset. With Alternate Line Service, you can:

• Set up different billing addresses for each phone line.

• Use different ringer styles so that you can tell which line is receiving the call.

• Forward incoming calls to the primary and alternate line to different phone numbers.

To set the active line:


Calls > Set Line.

2 Select the phone line you want to be the active line.

When calls made to the line that is not active are set to be forwarded to the active line, these calls are sent to voice mail without ringing. See “Call

Forwarding” on page 53.

81


Call Restrictions

You can prevent your phone from making or receiving long distance, incoming, and outgoing

(except 911) calls.

Nextel 411

You can call Nextel 411 within the continental United

States and Hawaii. Services include white and yellow page listings, driving directions, restaurant reservations, movie listings and showtimes, and local event information.

82

Customizing Your Phone

Setting the Volume

To set the volume of the sound coming from the phone’s earpiece or speaker:

1 From the main menu, select Settings > Volume.

2 Scroll to Earpiece to set the earpiece volume.

-or-

Scroll to Speaker to set the speaker volume.

3 Press

A under Change.

4 To select the volume:

Scroll left or right. -or-

Press the volume controls.

5 Press

A under Ok.

To set the volume of the phone’s ring:

Press the volume controls.

For another way to set the volume of the phone’s ring, or the volume of many other sounds your phone makes:

1 From the main menu, select Settings > Volume.

2 Scroll to the option you want and make the change. Choose Line 1 or Line 2 to set the volume of the phone’s ring when you get a call on that line.

See “Volume Features” on page 85.

Setting Your Phone to Not Ring

To set your phone to make no sound when you receive phone calls, Direct Connect calls, Group

Connect calls, message notifications, and call alerts, see “Setting Your Phone to Vibrate” on page 57.

To set your phone to vibrate instead of making a sound when you receive Direct Connect calls and

Group Connect calls, even if you want your phone to ring for other features:


Options > Alert Type.

Tip: If Alert Type does not appear: From the main menu, select Ring Tones. Make sure

VibeAll is set to Off. Repeat step 1.

2 Press

A under Change.

3 Scroll to Vibrate.

4 Press

A under Select.

83

Customizing Your Phone

Seeing the Display Better

To set the contrast of the display:

1 From the main menu, select Settings >

Display/Info > Contrast.

2 Press

A under Change.

3 Scroll left or right to set the contrast.

4 Press

A under Ok.

Using a Headset

If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time:

1 From the main menu, select Settings >

Advanced > Headset/Spker.

2 Press

A under Change.

3 Scroll to HdsetOnly to send incoming sound to the headset only. -or-

Scroll to Hdset&Spkr to send incoming sound to the headset and the speaker at the same time.

4 Press

A under Select.

Using Settings

Settings contains many submenus that let you customize your phone.

Display/Info Features

The Display/Info menu controls how the keypad and display appear:

• Backlight — controls how long the backlight stays on after you make or receive a call.

• Clock — controls whether the time and date appears on the idle screen, sets the format of the time and date, and sets the year.

• Contrast — sets the contrast on the display. See

“Seeing the Display Better” on page 84.

• Language — sets the language that your phone displays.

Phone Calls Features

The Phone Calls menu controls how your phone handles phone calls:

• Set Line — sets phone line 1 or phone line 2 as the active line for outgoing calls.

• Any Key Ans — If this feature is on, you can answer calls by pressing any key on the keypad.

84

• Auto Redial — sets your phone to automatically redial calls you make when the system is busy.

• Call Waiting — See “Call Waiting” on page 73.

• Auto Ans — sets your phone to automatically answer an incoming call after a specified number of rings. When this feature is on, the phone answers by connecting you to the caller; it does not send the call to voice mail, unless you are out of coverage or on the line.

• Minute Beep — causes a beep to sound every minute of an active call.

• Call Duration — causes the duration of a call to appear on the phones display when the call ends.

• TTY — lets you use your phone with a TTY device. See “Making TTY Calls” on page 79.

• Notifications — See “Setting Notification

Options” on page 49.

DC/GC Options Features

The DC/GC Options menu controls how your phone handles Direct Connect calls and Group Connect calls:

• Tkgrp Silent — controls whether you hear Group

Connect calls to your Talkgroup. See “Receiving

Group Connect Calls” on page 76.

• Tkgrp Area — lets you define your Talkgroup area.

Using Settings

• One Touch DC — See “Setting One Touch Direct

Connect” on page 75.

• Alert Type — controls how your phone notifies you when you receive Direct Connect calls and

Group Connect calls. See page 83.

Volume Features

The Volume menu sets the volume of sounds your phone makes:

• Line 1 — sets ring volume for phone line 1.

• Line 2 — sets ring volume for phone line 2.

• Messages — sets the volume of message notifications.

• Earpiece — sets the volume of sound coming out of the earpiece.

• Speaker — sets the volume of sound coming out of the speaker.

• Keypad — sets the volume of sound associated with pressing keys and buttons.

• Data — sets the volume of sounds that notifies you that you are receiving a circuit data call.

Security Features

The Security menu lets you turn security features on and off and change passwords:

85


• Phone Lock — turns on a feature that locks your phone, either immediately or automatically after a set period of inactivity. An unlock code is required to enable this feature, to unlock the phone, and to set a new Unlock code. Contact Nextel Customer

Care for your default unlock code.

• Keypad Lock — locks the phone’s keypad, either immediately or automatically after a set period of inactivity. See “Locking the Keypad” on page 15 for more information on locking and unlocking the keypad.

• SIM PIN — enables and disables your phone’s

SIM PIN security feature. See “Turning the PIN

Requirement On and Off” on page 13.

• GPS PIN — enables and disables your phone’s

GPS PIN security feature. See “Setting the GPS

PIN Security Feature” on page 66.

• Change Passwords — changes your phone unlock code, security code, SIM PIN, and GPS

PIN.

Advanced Features

The Advanced menu contains advanced and rarely used Settings features.

• Alert Timeout — controls the amount of time a tone continues to sound when you receive a message notification or call alert.

86

• Headset/Spker — See “Using a Headset” on page 84.

• Connectivity — Network ID sets the phone’s network IDs and their roaming options under the direction of Nextel Customer Care; Master Reset lets Nextel Customer Care reset your service in the event of a security or provisioning problem.

• Reset Defaults — Reset Settings returns all settings to their original defaults; Reset All returns all settings to their original defaults and erases all stored lists. Use only under the direction of Nextel Customer Care.

• Return to Home — controls how long the recent calls list displays after calls.

• Phone Only — prevents your phone from making or receiving Direct Connect calls or Group

Connect calls.

• Baud Rate — sets the baud rate at which your phone communicates with a laptop computer, PC, or similar device.

Optional Features

Speakerphone, VoiceRecord, and Voice-Activated

Dialing can be downloaded for an additional fee on www.nextel.com/idenupdate.

Changing the Phone Covers

To remove the phone covers:

1 Remove the back phone cover as described in

“Removing the Back Phone Cover” on page 2.

2 To loosen the front phone cover, gently lift the top tabs and pull the phone cover away from the phone slightly.

tabs

Changing the Phone Covers

3 To loosen the front phone cover further, gently pull the sides outward at the side tabs.

tab tab

4 Carefully pull the front phone cover away from your phone.

87


To replace the phone covers or put on new phone covers:

1 Place the keypad inside the front phone cover.

Press the keypad into the front phone cover until all the keys are in place.

2 Line up the bottom of the front phone cover with the bottom of your phone. Tabs in the corners of the front phone cover fit into slots in the corners of your phone.

3 Place the front phone cover on your phone and press it gently until you hear a click. If the bottom is lined up, the top tabs snap into place easily.

4 Replace the back phone cover as described in

“Inserting the Battery” on page 3.

To order new phone covers, log on to www.nextel.com.

88

Nextel Customer Care

There are a number of features available with your

Nextel service and your new i205 phone, so you may be overwhlemed at first. Relax! Nextel

Customer Care is here to help. If the feature information and instructions in this guide don't answer all your questions, or if you would like to inquire about other Nextel products and services, please feel free to contact us.

Please take a few steps to gather information about your phone prior to contacting us. This will better able us to provide you with the highest level of service possible. Please have the following information available to give to the representative who answers your inquiry.

• Your Personal Telephone Number (PTN).

• Your phone's model number (located underneath the battery).

• The ID numbers printed on your SIM card.

You'll want to keep this information handy so that you can replace the battery and power up your phone should the representative need you to access other information on it during your call.

Domestic Customer Care

Visit www.nextel.com for a variety of Customer Care services:

• Browse for information on phones, coverage, rates and other Nextel services. View and download user's guides, try out our interactive virtual product and service demos, find answers to frequently asked questions, order accessories, locate service and repair centers, upgrade phone software, send a message and more.

• For self-service on your Nextel account, click on

My Account to view your account, pay your bill, add phones to your account, reset your Voice

Mail password services and more.

• For online assistance, click on Contact Us to send us an email request. Our representatives are committed to assisting you. Every effort will be made to address your questions or concerns within 24 hours. Contact us to add Wireless Web and other services, change rate plans, inquire on your bill and more.

Or, call us at 1-800-639-6111 or dial 611 from your

Nextel phone.

89

Nextel Customer Care

Nextel Worldwide Customer

Care

When traveling outside of the U.S. and Canada, call

+1 (360) 662-5202 for your Customer Care service needs. This customer care number is toll-free from your Nextel handset.

International coverage rates and other information are also available on www.nextel.com.

90

Understanding Status

Messages

You may receive status messages under certain conditions. Before contacting Nextel Customer

Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages.

Status Messages Message Description

Number Not in

Service

The number that you entered is not valid.

User Not Available

The phone that you called is either busy, out of coverage, or turned off.

Please try again later.

The person that you called has not purchased this service.

User Not

Authorized

Please Try Later

User Busy in Direct

Connect call

This service is temporarily not available. Please try again later.

The phone that you called is busy in a Direct Connect call.

User Busy in Data

The phone that you called is busy using Nextel Wireless Web services.


Service Restricted

Service Not

Available

This service was restricted by

Nextel, or this service was not purchased.

You are either out of coverage or having problems with provisioning.

System Busy

Service Conflict

Please Try Again

The system is experiencing heavy traffic. Please try again later.

This service cannot be enabled because an incompatible service has already been turned on.

An error occurred. Please try again.

Self Check Error +

Number Code

Self Check Fail +

Number Code

PIN Blocked

Call Your Provider

A fault was detected with your phone. If this error recurs, note the error code and contact Customer

Care.

An operational fault was detected with your phone. Note the numeric code, turn your phone off, and contact Customer Care.

The incorrect PIN was entered three consecutive times. You will be unable to place or receive calls on your phone. Contact Nextel

Customer Care to have them obtain the PIN Unblocking Key (PUK) code.

91

Understanding Status Messages


Insert SIM

Check SIM Card

Wrong PIN

Please Enter

Special Code

Enter SIM PIN

Enter Unlock Code

Your SIM card is not being detected.

Please check to ensure that you have inserted the SIM card correctly into your phone.

Please check your SIM card to make sure it has been inserted properly.

You have entered an incorrect PIN number.

You have inserted a SIM card that will not work with a Nextel phone.

Contact Customer Care if you believe this is a valid SIM card.

Please enter your 4- to 8- digit SIM

PIN code.

Auto Phone Lock is activated. Enter you unlock code.

Warns of low memory for Net Alerts.

New Browser

Message Memory

Full!

Scanning for

Satellites

Searching for GPS satellites.

Unable to Locate

Sats

Could not find GPS satellites.

92


For Update Visit:

Technical Error

Directs you to update GPS satellite almanac data.

A problem occurred in your phone’s

GPS circuitry. If this error occurs, contact Customer Care

Nextel Terms and

Conditions of Service

TERMS AND CONDITIONS OF SERVICE: This

Agreement starts when you open the inside package of any phone or accessory equipment

(“Equipment”), you (“Customer”) received with this

Agreement, or when you call to activate Nextel wireless communications services (“Service”), or when you sign this Agreement, whichever applies.

By using the Equipment, Customer applies and subscribes for Services provided by Nextel (the

“Company”) and confirms that Customer has read, understands, agrees to and accepts the terms and conditions stated herein (the “Agreement”). Should there be any conflict between the terms and conditions below, and the terms and conditions of any current Service/Subscriber Agreement between

Customer and Company covering the Equipment accompanying this User’s Guide, the terms and conditions of the current Service/Subscriber

Agreement will control.

1. USE OF SERVICE – By executing this

Agreement, Customer covenants that it shall comply with all applicable laws, including without limitation all Federal Communications Commission rules and regulations. Customer will not use the Service for any unlawful purpose. Customer will not use the

Service in aircraft or in motor vehicles where prohibited by law, ordinance or regulation, as applicable. Customer acknowledges and agrees that all future purchases of Company Services and

Equipment by Customer shall be governed by the terms and conditions contained herein unless

Customer and Company enter into a subsequent

Subscriber Agreement. Company may change this

Agreement at any time. Any changes are effective when Company provides Customer with written notice stating the effective date of the change(s). If

Customer elects to use the Services or make any payment to Company on or after the effective date of the changes, Customer is deemed to have accepted the change(s). If Customer does not accept the changes, Customer may terminate

Services as of the effective date by sending written notice to Company at the address shown on

Customer’s bill. If Services are terminated before the end of the current billing cycle, (i) no credit or refund will be provided for unused airtime; and (ii) any monthly recurring charge will not be prorated to the date of termination.

2. TERM –The Service Term of this Agreement shall be specified on the Subscriber Agreement Form and shall commence as of the date hereof. Thereafter, unless Customer or Company terminates this

Agreement as provided for herein, this Agreement shall automatically renew on a month-to-month basis. Notice of termination by Customer shall be

93

Nextel Terms and Conditions of Service made only in writing to Company at the address shown on Customer’s bill. Company reserves the right not to renew this Agreement at any time prior to the conclusion of the Service Term or any renewal term. Except for a Customer termination in response to Company changes in accordance with Section 1 above, a $200 cancellation fee per unit will be charged to Customer for cancellation within the

Service Term, if a one or two year Service Term is selected on the Subscriber Agreement. If Company permits Customer to suspend Service to Customer’s account(s) for a temporary period, Company may extend the term of this Agreement by the length of the temporary suspension. If Customer changes rate plans during the Service Term of this

Agreement, or upgrades Equipment at any time, then Customer may be required to start a new

Service Term of up to 24 months as of the date of the change or upgrade and may be subject to a transfer fee.

3. CREDIT APPLICATION – This Agreement shall be contingent upon Company’s approval of

Customer’s credit application. Company may require Customer to update its credit application or information from time to time. Customer warrants and represents that all information furnished on the credit application is current, complete, accurate, and true. If Company subsequently determines that any statements made on the credit application are false, incomplete or inaccurate, Company may declare

94

Customer to be in default under this Agreement and may exercise any remedies it has under this

Agreement at law or in equity. Customer understands that Company will rely upon the credit information provided by Customer, including but not limited to Customer’s social security number or tax identification number, and other confidential and personal financial and credit information requested by Company and supplied by Customer, in making a decision to provide Services. Customer consents to

Company’s requests for and verification of

Customer’s bank references and Company’s performance of a credit history check utilizing standard commercial credit reference services in connection with Company’s review of the

Customer’s creditworthiness. Customer acknowledges that Company may provide payment history and other billing/charge information to a credit-reporting agency for inclusion in Customer’s records maintained by such credit-reporting agency.

Customer understands that a security deposit or airtime usage limit may be required.

4. EQUIPMENT AND INSTALLATION – If the sale is for cash only, title to the Equipment shall be transferred to Customer upon receipt by Company of a cashier’s or certified check or other equally secure form of payment in the amount set forth on the front of this Agreement. Company shall not be liable to Customer for delays in delivery or unavailability of Equipment or any part thereof or for

the cancellation of any orders of Equipment by the manufacturer. Customer, at its option, may have the

Equipment installed by Company at the rate specified on the front of this Agreement. If Customer purchases the Equipment on credit or an installment basis, installations, repairs, and removal of

Equipment must be performed by a party authorized by Company. Company shall not be liable for any damage to Customer’s vehicle(s) or Equipment that may result from installation of Equipment by any person who is not employed by Company. Customer shall not modify, disassemble, de-install or alter the

Equipment in any manner whatsoever, except in accordance with the User Guide accompanying the

Equipment.

5. CUSTOMER RADIO EQUIPMENT – Company is not responsible for the installation, operation, quality of transmission, or, unless separate maintenance arrangements have been made between Company and Customer, maintenance of the Equipment. Any change in Service or Equipment may require additional programming or Equipment or changes to assigned codes or numbers which may require programming fees. Company reserves the right to change or remove assigned codes and/or numbers when such change is reasonably necessary in the conduct of its business. Customer does not have any proprietary interest in such codes or numbers.

Although Federal and state laws may make it illegal for third parties to listen in on service, complete privacy cannot be guaranteed. Company shall not be liable to Customer or to any third party for any eavesdropping on or interception of communications from Company’s System.

6. NEXTEL ONLINE SERVICES – Nextel Online

Services, consisting of certain applications such as email, data, information and other wireless internet services (the “Applications ”) are part of the Services that can be obtained through Company. Certain

Applications offered by Company or authorized third parties may be compatible with the Equipment and/or the Service offered by Company. Customer acknowledges and agrees that there is no guarantee or assurance that the Applications are compatible, or will continue to be compatible, with

Company’s System or any of its Equipment or

Service offerings. Such compatibility or approval from Company of compatibility shall not be construed as an endorsement of a particular

Application or a commitment on the part of

Company that Application(s) will continue to be compatible with the System, Equipment or Service for any period of time. Company reserves the right, in its sole discretion, to disable or discontinue any

Application for any reason. Use of Nextel Online

Services requires a wireless internet compatible phone, and is subject to any storage, memory or

95

Nextel Terms and Conditions of Service other Equipment limitation. Only certain internet sites may be accessed, and certain Nextel Online

Services may not be available in all Company

Service areas.

7. APPLICATION CUSTOMER CARE AND

SUPPORT – Customer acknowledges and agrees that in most cases, the developer of an Application is responsible for providing Customer care and

Application support to all Customers using the

Application. In the event Customer contacts

Company Customer care with a problem concerning the use of an Application, Customer may be referred to the Application developer’s Customer care, and

Company shall have no obligation to support such

Application.

8. CONTENT; COMMUNICATIONS WITH

OTHERS; INTELLECTUAL PROPERTY RIGHTS –

Company is not a publisher of third party content that Customer may from time to time access through

Nextel Online Services; therefore Company is not responsible for the content provided by such third parties, including but not limited to statements, opinions, graphics, photos, music, services and other information (“Content”), and accessed by

Customer through Nextel Online Services. Nor is

Company responsible for the actions of third parties arising from a Customer’s contact with such third parties via Nextel Online Services, whether such contact is facilitated through Customer’s own

96 initiative or via an embedded link on the Equipment.

Company gives no guarantee or assurance as to the currency, accuracy, completeness or utility of

Content obtained through Nextel Online Services.

Company, Content providers and others have proprietary interests in certain Content. Customer shall not, nor permit others, to reproduce, broadcast, distribute, sell, publish, commercially exploit or otherwise disseminate such Content in any manner without the prior written consent of Company,

Content providers, or others with proprietary interests in such Content, as applicable.

9. DEPOSITS – Customer shall provide Company with a deposit towards the purchase of the

Equipment in the amount set forth on the front of this agreement. Company also has the right, exercisable in its sole discretion at any time or from time to time, to require Customer to make a deposit to guarantee payment of sums due hereunder, including Service charges. Unless otherwise required by law, deposits may be mixed with other funds and will not earn interest. Customer hereby grants Company, as applicable, a security interest in such deposits, to secure the payment of all sums due hereunder as well as the performance of all other payment obligations Customer may have to the Company whether now existing or hereafter arising. Upon termination of Service, or upon the first billing cycle after the twelfth month of service, whichever comes first, Company may apply the deposit against any

outstanding Service charges of Customer or any other amount owed to the Company. If Customer is terminating the Agreement, any remaining balance will be released to the Customer at the Customer’s last known address within approximately 90 days. If the Customer continues with the Agreement, any credit balance remaining after the deposit is applied will be applied to any amounts that may become owing to the Company in the future except that, at

Customer’s request, amounts of $50 or more will be released to the Customer at the latest address known to Company within 30 days of the Customer request. In all cases, Customer agrees that any remaining balance will be retained by Company in the event the postal service is unable to deliver the funds to the Customer at the latest address known to Company. Company reserves the right to interrupt Services if Service appears to have excessive charges, payments are delinquent, any unusual calling patterns are observed on

Customer’s account, or during public safety emergencies. Such interruption may be done to protect Customer or Company as the Company determines in its sole discretion, but in no event shall the Company be liable to the Customer or to any third party by reason of interrupting or failing to cause an interruption of Service.

10. RATES, CHARGES, AND PAYMENT – The price established for Service is set forth in the current Company rate plan(s) selected by Customer.

Company shall issue invoices for Service. Monthly

Access charges shall be invoiced in advance.

Airtime and long distance charges shall be invoiced in arrears. Customer is responsible to pay

Company, on a timely basis, for charges for Service as set forth on the front of this Agreement, and any modifications thereto. If Customer elects to pay using a Company-approved credit or debit card,

Customer hereby authorizes Company to charge the credit or debit cards specified by Customer from time to time on a recurring basis for all charges incurred on the Company Account Numbers set forth on Customer’s invoice. Customer (i) expressly authorizes Company to charge Customer’s designated credit or debit card account number(s) for all fees and charges incurred; and (ii) reauthorizes Company to charge such account number each time services are used. Customer shall promptly notify Company of any changes to the credit or debit card or bank account used for payment. Enrollment is for the duration of this

Agreement unless cancelled earlier by either party with thirty (30) days advance written notice to the other party. Customer acknowledges that chargeable time for telephone calls and Nextel

Direct Connect call transmissions originated by a unit begin when a connection is established with

97

Nextel Terms and Conditions of Service

Company facilities. A new Nextel Direct Connect call is initiated by a call participant if that participant responds more than six (6) seconds after the other party finishes its Nextel Direct Connect transmission. Customer accepts responsibility for

Airtime charges from incoming telephone calls to its mobile unit from the time that Customer responds to the call. If Customer disputes any Service charges,

Customer must pay the entire amount set forth in the invoice by the due date and submit a written explanation within forty five (45) days from the date on the invoice. Direct Connect, Group Connect, and

Nationwide Direct Connect charges are calculated by multiplying the minutes of use, number of participants, and applicable rate, to be paid by the initiator. If Company determines that an error was made on Customer’s invoice, Company shall credit

Customer’s account in the amount of the error. If

Customer does not pay the amount in dispute,

Company may exercise any remedies it may have under this Agreement for non-payment of Service charges. Company reserves the right to modify any and all elements of the Service charges at any time and each such modification shall be effective immediately upon the Company’s communication thereof to Customer, unless the Company’s communication indicates a later effective date with respect to such modification. Payments which are not received within thirty (30) days from the date of the invoice shall be subject to late payment charges

98 as set forth in this Agreement. If the parties have agreed that payments are to be made in installments, or on credit, as indicated on the front of this Agreement, Customer shall be responsible for paying amounts due as agreed to in this Agreement.

If Customer does not make all payments when they are due, such failure shall be a default under this

Agreement and Company shall be entitled to exercise any remedies it may have under this

Agreement or at law or in equity. If the sale of the

Equipment is on a credit or installment basis and the

Customer accepts delivery of the Equipment, the

Customer may not return the Equipment or receive a refund of any amounts paid and agrees to continue making payments as required under this agreement until the Equipment sale price is paid in full.

11. NONPAYMENT/BREACH – A late payment charge of 1.5% (or the maximum interest rate permitted by law) per month may be applied to

Customer’s account if monthly invoices are not paid by the due date. The late payment charge is applied to the total unpaid balance due and outstanding.

The late payment charge is for costs related to the non-timely payment and shall not be deemed an interest payment. A charge of $25.00 will be made by Company for any check or negotiable instrument tendered by Customer and returned unpaid by a financial institution for any reason. Company may demand payment by money order, cashier’s check, or similarly secure form of payment, at Company’s

discretion at any time or from time to time. If

Company obtains the services of a collection or repossession agency or an attorney to assist

Company in remedying Customer’s breach of this

Agreement, including but not limited to the nonpayment for charges hereunder, Customer shall be liable for this expense. Customer understands that in the event of nonpayment of charges or any other breach of the terms and conditions of this

Agreement, in addition to any other remedies

Company may have, Company may temporarily or permanently terminate Service to Customer. If

Service is terminated and not reconnected within thirty (30) days, all outstanding payments to be made in installments are accelerated and immediately due in full. If Company disconnects the

Service, Customer shall be liable to satisfy and discharge all outstanding amounts due and pay a reconnect charge of $25.00 per unit, in addition to any advance payment of Service charges that may be requested by the Company at its discretion, before the Company will reactivate Service.

Company reserves the right to modify the terms of

Service as a precondition to reactivating Service. If the Equipment is purchased on an installment basis, or credit, the Company may take possession of the

Equipment, at any time wherever the same may be without legal process and without being responsible for loss and damage.

12. RISK OF LOSS;INSURANCE – Upon

Customer’s acceptance of delivery of the

Equipment, all risk of loss, damage, theft, or destruction to the Equipment shall be borne by the

Customer. No such loss, damage, theft, or destruction of the Equipment, in whole or part, shall impair the obligations of Customer hereunder, including, without limitation, responsibility for the payment of Service Charges due hereunder.

13. PROPERTY DAMAGE INSURANCE – If

Customer selects Direct Protect insurance protection, Company will remit the monthly charge for the insurance that appears on Customer’s bill to

The Signal Telecommunications Insurance Services

(“Signal ”) on Customer’s behalf. Customer acknowledges that insurance protection is offered by the Signal, not Company, and that any requests for information or claims regardingthe insurance shall be directed to Signal. Customer acknowledges having received a summary of coverage, including deductible information, which is also available by calling Signal at 1-888-352-9182.

14. TAXES, FEES, SURCHARGES &

ASSESSMENTS – Customer must pay all federal, state, and local taxes, fees, surcharges, and other assessments (collectively, “Charges”) that are imposed on transactions subject to this Agreement.

Customer will be responsible for such charges regardless of whether the Charge is: (a) imposed

99

Nextel Terms and Conditions of Service upon the sale of telecommunications services, other services, equipment, and/or other products; (b) measured by gross receipts from sales made by

Company to Customer; (c) imposed upon the

Customer or upon the Company; (d) imposed as a per-line or per-unit Charge. Such Charges include, but are not limited to: excise taxes; sales and transaction taxes; gross receipts taxes, utility taxes; universal service assessments; telephone relay service (TRS) assessments; and other regulatory fees and assessments. Customer shall not be responsible for taxes imposed on Company’s net income. If Customer claims an exemption from any such Charge, Customer must provide Company with valid and properly-executed documentation of such exemption before such exemption shall become effective. Customer must provide Company with the

Customer’s Primary Place of Use of Company’s

Service, as defined by Customer’s residential street address or primary business address.

15. COVERAGE AREA – Local Dispatch (Direct

Connect), cellular calling, Nextel Online Services, and respective coverage areas for these Services are subject to change at any time at the sole discretion of Company.

16. LIMITATION AND CONDITION OF LIABILITY;

INDEMNITY – Company does not assume and shall have no liability under the Agreement for (i) failure to deliver the Equipment within a specified time period;

100

(ii) availability and delays in delivery of the

Equipment, or (iii) damage caused to the Equipment due directly or indirectly to causes beyond the control of Company, including, but not limited to acts of God, acts of the public enemy, acts of the government, acts or failure to act of the Customer, its agents, employees or subcontractors, fires, floods, epidemics, quarantine restrictions, corrosive substances in the air or other hazardous environmental conditions, strikes, freight embargoes, inability to obtain materials or services, commotion, terrorism, war, unusually severe weather conditions or default of Company’s subcontractors whether or not due to any such causes; (iv) the use of Nextel Online Services, including but not limited to the accuracy or utility of any information acquired from the Internet through

Nextel Online Services; or Internet Services,

Content or Applications whether or not supported by

Company; or (v) any action Company takes in its sole discretion to protect Company’s network, systems, and the rights or property of Company, its subscribers, or others from “hacking,” “spamming,”

“viruses ” or other acts of third parties that Company believes adversely impact its network or systems.

WITHOUT LIMITING THE FOREGOING, THE

COMPANY’S SOLE LIABILITY FOR SERVICE

DISRUPTION, WHETHER CAUSED BY THE

NEGLIGENCE OF THE COMPANY OR

OTHERWISE, IS LIMITED TO A CREDIT

ALLOWANCE NOT EXCEEDING AN AMOUNT

EQUAL TO THE PROPORTIONATE CHARGE TO

THE CUSTOMER FOR THE PERIOD OF SERVICE

DISRUPTION. EXCEPT AS OTHERWISE SET

FORTH IN THE PRECEDING SENTENCE, IN NO

EVENT IS THE COMPANY LIABLE FOR ACTUAL,

CONSEQUENTIAL, INCIDENTAL, SPECIAL OR

OTHER INDIRECT DAMAGES CAUSED BY ITS

NEGLIGENCE OR OTHERWISE, NOR FOR

ECONOMIC LOSS, PERSONAL INJURIES OR

PROPERTY DAMAGES SUSTAINED BY THE

CUSTOMER OR ANY THIRD PARTIES. Customer agrees to indemnify, defend, and hold Company harmless from any Customer violations of FCC rules and regulations or Customer violation of any statutes, ordinances or laws of any local, state, or federal public authority.

17. COMPLETE

AGREEMENT/SEVERABILITY/WAIVER – This

Agreement sets forth all of the agreements between the parties concerning the Service and purchase of the Equipment, and there are no oral or written agreements between them other than as set forth in this Agreement. Except for changes made by

Company in accordance with Section 1 above, no amendment or addition to this Agreement shall be binding upon Company unless it is in writing and signed by both parties (and, in the case of the

Company, by an officer of the Company). Company shall not be bound by the terms and conditions in

Customer’s purchase order or elsewhere, unless expressly agreed to in writing by an officer of the

Company. This Agreement becomes effective when accepted by the Company. Should any provision of this Agreement be illegal or in contravention of the law, such provision shall be considered null and void but the remainder of this Agreement shall not be affected thereby. The failure of Company at any time to require the performance by Customer of the provisions of this Agreement shall not affect in any way the right to require such performances at any later time nor shall the waiver by Company of a breach of any provision hereof be taken or held to be a waiver of compliance with or breach of any other provision or a continuing waiver of such provision.

18. ASSIGNMENT/RESALE/GOVERNING LAW –

This Agreement may be freely assigned by

Company to any successor of it or any other firm or entity capable of performing its obligations hereunder, and upon any such assignment,

Company shall be released from all obligations to

Customer. Customer may not assign this

Agreement, or resell the services which are subject to this Agreement without prior written consent of

Company. Subject to the restrictions contained herein, this Agreement shall bind and inure to the benefit of the successors and permitted assigns of

101

Nextel Terms and Conditions of Service the parties hereto. This Agreement shall be governed by the laws of the State or Commonwealth in which this Agreement is executed by the

Company.

19. NOTICE REGARDING USE OF SERVICE FOR

911 OR OTHER EMERGENCY CALLS - (a) The

Service provided hereunder does not interact with

911 and other emergency services in the same manner as landline telephone service. Depending on Customer’s location and the circumstances and conditions of a particular call, the Service provided hereunder may not be able to identify Customer’s telephone number and/or location to emergency services, and Customer may not always be connected to the appropriate emergency services provider. Company is deploying wireless Enhanced

911 (“E911 ”) service to help public safety authorities locate Customers and other users of the

Service who make 911 calls. However, E911 is not available in all areas, and even in those areas where it is implemented, inherent limitations in this advanced wireless technology prevent it from being

100% reliable. Accordingly, Company agrees to provide Customer with E911 service where available, and Customer acknowledges that E911 service is not available in all areas and is not completely reliable. (b) Customer hereby consents to Company’s disclosure of Customer information, including but not limited to Customer name, address, telephone number, and location, to

102 governmental and quasi-governmental institutions such as emergency service providers and law enforcement agencies, where Company deems it necessary to respond to an exigent circumstance.

20. NO WARRANTY (SERVICE) – COMPANY

MAKES NO WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING WITHOUT LIMITATION,

ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE TO CUSTOMER IN

CONNECTION WITH ITS USE OF THE SERVICE.

IN NO EVENT SHALL COMPANY BE LIABLE FOR

INCIDENTAL, CONSEQUENTIAL OR OTHER

INDIRECT DAMAGES TO THE FULL EXTENT THE

SAME MAY BE DISCLAIMED BY LAW.

CUSTOMER ACKNOWLEDGES THAT SERVICE

INTERRUPTIONS WILL OCCUR FROM TIME TO

TIME, AND AGREES TO HOLD COMPANY

HARMLESS FOR ALL SUCH INTERRUPTIONS.

21. NO WARRANTY (EQUIPMENT) – COMPANY

MAKES NO WARRANTIES OR

REPRESENTATIONS OF ANY KIND,

STATUTORY, EXPRESS OR IMPLIED, TO

CUSTOMER OR TO ANY OTHER PURCHASER

OF THIS EQUIPMENT. WITHOUT LIMITING THE

FOREGOING, COMPANY SPECIFICALLY MAKES

NO EXPRESS OR IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. CUSTOMER HEREBY

WAIVES, AS AGAINST COMPANY, ALL OTHER

WARRANTIES, GUARANTEES, CONDITIONS, OR

LIABILITIES, EXPRESS OR IMPLIED, ARISING BY

LAW OR OTHERWISE. IN NO EVENT SHALL

COMPANY BE LIABLE FOR CONSEQUENTIAL,

SPECIAL, OR INCIDENTAL DAMAGES,

WHETHER OR NOT OCCASIONED BY COMPANY

NEGLIGENCE AND INCLUDING, WITHOUT

LIMITATION, LIABILITY FOR ANY LOSS OR

DAMAGE RESULTING FROM THE

INTERRUPTION OR FAILURE IN THE

OPERATION OF ANY EQUIPMENT SOLD OR

OTHERWISE PROVIDED HEREUNDER. THERE

ARE NO WARRANTIES WHICH EXTEND

BEYOND THE DESCRIPTION CONTAINED

HEREIN. CUSTOMER ASSUMES THE ENTIRE

RISK AS TO THE QUALITY AND PERFORMANCE

OF THE EQUIPMENT. UNLESS OTHERWISE

AGREED BY COMPANY, IF THE EQUIPMENT

PROVES DEFECTIVE, THE COSTS OF ALL

NECESSARY SERVICING AND REPAIR WILL BE

BORNE BY CUSTOMER.

22. NEXTEL ONLINE “GOLD ” SERVICES – Nextel

Online “Gold ” Services are those Internet and data

Services offered in conjunction with a Service plan using the suffix “Gold ”; e.g., Packetsream Gold.

Company may charge an activation fee for each IP address for these services. These services may be used only with mobile clients for Internet/intranet access and Internet e-mail via a standard HTML browser (e.g., Netscape ® Navigator or

Communicator, Microsoft ® Internet Explorer, etc.) It may also be used with software for proxy applications, for dispatch applications, for POP3 email access, and for other use specifically approved by Nextel. These Internet and data

Services may not be substituted for a private line or frame relay connection, or be used for streaming data feeds. Company reserves the right to deny service, without notice, to any Customer whose usage adversely impacts Company’s network, systems or other subscribers’ use of Services.

23. NETWORK SECURITY, INTEGRITY, AND

OPTIMIZATION - Company may take any and all action it deems necessary or reasonable to (i) protect its network and systems, or the rights of

Company, Company’s subscribers or others; (ii) optimize or improve its network or systems; or (iii) improve its products and services. Such action may include, without limitation, employing methods, technologies, or procedures to filter or block messages sent through Company’s network or systems. Accordingly, Company may, in its sole and absolute discretion, at any time, filter “spam ”, without regard to any Customer preference solicited by Company or exercised by Customer. Company shall not be liable to Customer or to any third party for blocking messages sent through Company’s network or systems.

103

Nextel Terms and Conditions of Service

24. CUSTOMER INFORMATION – Company may in its sole discretion access, use, and disclose to third parties, any information (whether personally identifying information, or “Customer proprietary network information,” within the meaning of 47

U.S.C.§ 222 and its implementing regulations) it collects, possesses or develops about Customer (i) to provide any product or service that Customer purchases, or accesses through or uses on the

Equipment; (ii) to conduct marketing activities in accordance with applicable law, and Company’s privacy policy, as described below; (iii) to provision a number portability request, either through Company or a new service provider; (iv) to comply with the law; or (v) to respond to emergencies. Customer acknowledges that (i) Company posts a privacy policy on its website that explains its policies with respect to the collection, access, use, and disclosure of personal Customer information; (ii)

Company may revise such policy at any time; and

(iii) the most recent version of such policy shall at any time serve as the effective privacy policy, regardless of the date on which Customer entered into this Agreement.

25. COMMERCIAL LOCATION BASED SERVICES

- If Customer purchases any commercial location based service for use through Company’s network or Equipment, Customer shall clearly, conspicuously, and regularly notify all its users that location information (i.e., the geographic

104 coordinates of the Equipment) may be accessed, used, or disclosed to provide the location based service and that, as a result, Customer or someone other than the user of the Equipment may be able to identify the geographic coordinates of the

Equipment. CUSTOMER AGREES TO INDEMNIFY

AND HOLD COMPANY HARMLESS AGAINST

ANY AND ALL CLAIMS, DEMANDS, ACTIONS, OR

CAUSES OF ACTION (INCLUDING ALL ACTIONS

BY THIRD PARTIES) ARISING OUT OF A

BREACH OF THE OBLIGATIONS ENUMERATED

IN THIS SECTION 25 OF THE AGREEMENT.

Safety and General

Information

IMPORTANT INFORMATION ON SAFE AND

EFFICIENT OPERATION.

READ THIS INFORMATION BEFORE USING

YOUR INTEGRATED MULTI-SERVICE

PORTABLE RADIO.

RF Operational Characteristics

Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.

Portable Radio Product

Operation and EME Exposure

Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):

• United States Federal Communications

Commission, Code of Federal Regulations; 47

CFR part 2 sub-part J.

• American National Standards Institute (ANSI) /

Institute of Electrical and Electronics Engineers

(IEEE). C95. 1-1992.

• Institute of Electrical and Electronics Engineers

(IEEE). C95. 1-1999 Edition.

• International Commission on Non-Ionizing

Radiation Protection (ICNIRP) 1998.

• Ministry of Health (Canada). Safety Code 6.

Limits of Human Exposure to Radiofrequency

Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999.

• Australian Communications Authority

Radiocommunications (Electromagnetic

Radiation - Human Exposure) Standard 2001.

• ANATEL, Brasil Regulatory Authority, Resolution

256 (April 11, 2001) “additional requirements for

SMR, cellular and PCS product certification.”

To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:

105

Safety and General Information

Phone Operation

When placing or receiving a phone call, hold your radio product as you would a wireline telephone.

Speak directly into the microphone.

Two-way radio operation

When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two

inches (2.5 to 5 cm) away from the lips.

Body-worn operation

To maintain compliance with FCC RF exposure guidelines, if you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case

or body harness for this product. Use of non-Motorola-approved accessories may exceed

FCC RF exposure guidelines. If you do not use a

Motorola approved body-worn accessory and are not using the radio product in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode, then ensure the antenna and the radio product are kept the following minimum distances from the body when transmitting

• Phone or Two-way radio mode: one inch (2.5

cm)

• Data operation using any data feature with or without an accessory cable: one inch (2.5 cm)

Antenna Care

Use only the supplied or an approved

replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio product and may violate FCC regulations.

DO NOT hold the antenna when the radio

product is “IN USE”. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed.

Approved Accessories

For a list of approved Motorola accessories call

1-800-453-0920, or visit our website at www.mot.com/iden.

106

ALL MODELS WITH FCC ID AZ489FT5822 MEET THE

GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO

RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the

Federal Communications Commission of the U.S.

Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption

Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.

1

Tests for SAR are conducted using standard operating positions reviewed by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the FCC that is does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the

Portable Radio Product Operation and EME Exposure body) as required by the FCC for each model. The highest

SAR value for this model phone when tested for use at the ear is 1.19 W/kg and when tested on the body, as described in this user guide, is 1.39 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessories and

FCC requirements.) 2

While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID

AZ489FT5822.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry

Association (CTIA) web-site at http://www.wow-com.com.

1 In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

2 The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.

107


Electro Magnetic

Interference/Compatibility

Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility.

Facilities

To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.

Aircraft

When instructed to do so, turn off your radio product when on board an aircraft. Any use of a radio product must be in accordance with applicable regulations per airline crew instructions.

Medical Devices

Pacemakers

The Advanced Medical Technology Association

(AdvaMed) recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio product and a pacemaker.

These recommendations are consistent with those of the U.S. Food and Drug Administration.

Persons with pacemakers should:

• ALWAYS keep the radio product more than 6 inches (15 cm) from their pacemaker when the radio product is turned ON.

• Not carry the radio product in a breast pocket.

• Use the ear opposite the pacemaker to minimize the potential for interference.

• Turn the radio product OFF immediately if you have any reason to suspect that interference is taking place.

Hearing Aids

Some digital wireless radio products may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.

108

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.

Use While Driving

Check the laws and regulations on the use of radio products in the area where you drive. Always obey them.

When using the radio product while driving, please:

• Give full attention to driving and to the road .

• Use hands-free operation, if available.

• Pull off the road and park before making or answering a call if driving conditions so require.

Operational Warnings

Operational Warnings

For Vehicles with an Air Bag

!

!

Do not place a portable radio product in the area over the air bag or in the air bag deployment area.

Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio product may be propelled with great force and cause serious injury to occupants of the vehicle.

Potentially Explosive Atmospheres

Turn off your radio product prior to entering any area with a potentially explosive atmosphere, unless it is a radio product type especially qualified for use in such areas as “Intrinsically Safe” (for example,

Factory Mutual, CSA, or UL approved). Do not remove, install, or charge batteries in such areas.

Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.

Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any

109

Safety and General Information other area where you would normally be advised to turn off your vehicle engine.

Areas with potentially explosive atmospheres are often but not always posted.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.

Operational Cautions

!

Antennas

Do not use any portable radio product that has a

damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result.

Batteries

All batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects.

Cleaning and Drying Considerations

Using a leather carry case may help protect the surfaces and help prevent liquids (e.g., rain) from entering into the interior of the radio product. This product is not water proof, and exposing the unit to liquids may result in permanent damage to the unit.

If your radio product interior gets wet, then do not try to accelerate drying with the use of an oven or a dryer as this will damage the radio product and void the warranty. Instead, do the following:

1 Immediately power off the radio product.

2 Remove Battery and SIM card (if so equipped) from radio product.

3 Shake excess liquid from radio product.

4 Place the radio product and battery in an area that is at room temperature and has good air flow.

5 Let the radio product, battery, and SIM card dry for 72 hours before reconnecting the battery and/or powering on the radio product.

If the radio product does not work after following the steps listed above, contact your dealer for servicing information.

110

Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product.

Accessory Safety Information

Important: Save these accessory safety instructions.

• Before using any battery or battery charger, read all the instructions for and cautionary markings on

(1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery.

• Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only.

!

!

Warning: To reduce the risk of injury, charge only the rechargeable batteries described in “Battery” on page 3 through page 5. Other types of batteries may burst, causing personal injury and damage.

Accessory Safety Information

• To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you disconnect the battery charger from the power source outlet.

• Do not operate any battery charger with a damaged cord or plug — replace them immediately.

• Battery chargers may become warm during operation, but not hot. If it becomes hot to the touch, unplug it from the power outlet immediately and discontinue its use.

• Use of a non-recommended attachment to a battery charger may result in a risk of fire, electric shock, or injury to persons.

• Make sure the battery charger power cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress.

• An extension cord should not be used with any battery charger unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that:

• The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.

• The extension cord is properly wired and in good electrical condition.

111


• The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet.

• Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician.

• Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

• Maximum ambient temperature around the power supply or transformer of any battery charger should not exceed 40°C (104°F).

• The output power from the power supply or transformer must not exceed the rating given on the Desktop Dual-Pocket Charger.

• The disconnection from the line voltage is made by unplugging the power supply from the

AC receptacle.

• To reduce risk of electric shock, unplug any battery charger from the outlet before attempting any maintenance or cleaning.

For optimum charging performance, turn off the radio product while charging it in any battery charger.

112

MOTOROLA LIMITED

WARRANTY

Note: FOR IDEN SUBSCRIBER PRODUCTS,

ACCESSORIES AND SOFTWARE

PURCHASED IN THE UNITED STATES

OR CANADA

What Does this Warranty Cover?

Subject to the exclusions contained below,

Motorola, Inc. warrants its Motorola iDEN Digital

Mobile and Portable Handsets ("Products"),

Motorola-branded or certified accessories sold for use with these Products ("Accessories") and

Motorola software contained on CD-Roms or other tangible media and sold for use with these Products

("Software") to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Products, Accessories and

Software purchased by consumers in the United

States or Canada, which are accompanied by this written warranty:

PRODUCTS

COVERED

Products as defined above.

Accessories as defined above.

LENGTH OF

COVERAGE

One (1) year from the date of purchase by the first consumer purchaser of the product.

One (1) year from the date of purchase by the first consumer purchaser of the product.

Products or

Accessories that are

Repaired or Replaced.

The balance of the original warranty or for

ninety (90) days from the date returned to the consumer, whichever is longer.

Ninety (90) days from the date of purchase.

Software as defined above. Applies only to physical defects in the media that embodies the copy of the software

(e.g. CD-ROM, or floppy disk).

113

MOTOROLA LIMITED WARRANTY

What is not covered? (Exclusions)

Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.

Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or

Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.

Use of Non-Motorola Products and Accessories.

Defects or damage that result from the use of

Non-Motorola branded or certified Products,

Accessories, Software or other peripheral equipment are excluded from coverage.

Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, antennas, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products, Accessories or Software is excluded from coverage.

Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.

114

Software NOT Embodied in Physical Media.

Software that is not embodied in physical media

(e.g. software that is downloaded from the internet), is provided "as is" and without warranty.

Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable.

What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new

Products, Accessories or parts. No data, software or applications added to your Product, Accessory or

Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled.

To avoid losing such data, software and applications please create a back up prior to requesting service.

How to Obtain Warranty Service or Other

Information? To obtain service or information, please call:

Motorola iDEN Customer Services

1-800-453-0920 or 954-723-4910

TTY-877-483-2840

Or visit us online at http://www.motorola.com/iden/support

You will receive instructions on how to ship the

Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase;

(b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.

What Other Limitations Are There? ANY IMPLIED

WARRANTIES, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED TO

THE DURATION OF THIS LIMITED WARRANTY,

OTHERWISE THE REPAIR, REPLACEMENT, OR

REFUND AS PROVIDED UNDER THIS EXPRESS

LIMITED WARRANTY IS THE EXCLUSIVE

REMEDY OF THE CONSUMER, AND IS

PROVIDED IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OF IMPLIED. IN NO

EVENT SHALL MOTOROLA BE LIABLE,

WHETHER IN CONTRACT OR TORT (INCLUDING

NEGLIGENCE) FOR DAMAGES IN EXCESS OF

THE PURCHASE PRICE OF THE PRODUCT,

ACCESSORY OR SOFTWARE, OR FOR ANY

INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES OF ANY KIND, OR

LOSS OF REVENUE OR PROFITS, LOSS OF

115

MOTOROLA LIMITED WARRANTY

BUSINESS, LOSS OF INFORMATION OR DATA,

SOFTWARE OR APPLICATIONS OR OTHER

FINANCIAL LOSS ARISING OUT OF OR IN

CONNECTION WITH THE ABILITY OR INABILITY

TO USE THE PRODUCTS, ACCESSORIES OR

SOFTWARE TO THE FULL EXTENT THESE

DAMAGES MAY BE DISCLAIMED BY LAW.

Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.

Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the

Motorola software. Motorola software may only be copied into, used in, and redistributed with, the

Products associated with such Motorola software.

No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.

116

Limited Warranty

Motorola Communication

Products (International)

Note: This Warranty applies in Singapore and the

Philippines.

I. What This Warranty Covers and For How Long:

MOTOROLA warrants the MOTOROLA manufactured iDEN Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below: iDEN Subscriber Digital Mobile and

Portable Units

Product Accessories (manufactured by or under license from

MOTOROLA)

Batteries

One (1) Year

One (1) Year

One (1) Year

Rechargeable Batteries will be replaced during the applicable warranty period if: a. the battery capacity falls below 80% of rated capacity, or b. the battery develops leakage.

MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty.

Replaced parts or boards are warranted for the balance of the original applicable warranty period.

All replaced parts of Product shall become the property of MOTOROLA.

This express limited warranty is extended by

MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between

MOTOROLA and the original end user purchaser,

MOTOROLA does not warrant the installation, maintenance or service of the Product.

117

Limited Warranty Motorola Communication Products (International)

MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by

MOTOROLA which is attached to or used in connection with the Product, or for operation of the

Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty.

Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole, or any portion of the system not produced by

MOTOROLA, under this warranty.

II. General Provisions:

This warranty sets forth the full extent of

MOTOROLA’S responsibilities regarding the

Product, Repair, replacement or refund of the purchase price, at MOTOROLA’S options, is the exclusive remedy. THIS WARRANTY IS GIVEN IN

LIEU OF ALL OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES, INCLUDING WITHOUT

LIMITATION, IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO THE

DURATION OF THIS LIMITED WARRANTY TO

THE FULL EXTENT SUCH MAY BE DISCLAIMED

BY LAW. IN NO EVENT SHALL MOTOROLA BE

LIABLE FOR DAMAGES IN EXCESS OF THE

PURCHASE PRICE OF THE PRODUCT, FOR ANY

LOSS OF USE, LOSS OF TIME,

INCONVENIENCE, COMMERCIAL LOSS, LOST

PROFITS OR SAVINGS OR OTHER INCIDENTAL,

SPECIAL OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE USE OR INABILITY TO

USE SUCH PRODUCT, TO THE FULL EXTENT

SUCH MAY BE DISCLAIMED BY LAW.

III. How to Get Warranty

Service:

You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by

MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service.

IV. What This Warranty Does

Not Cover:

a. Defects or damage resulting from use of the

Product in other than its normal and customary manner.

b. Defects or damage from misuse, accident,

118

water, or neglect.

c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.

d. Breakage or damage to antennas unless caused directly by defects in material workmanship.

e. A Product subjected to unauthorized Product modifications, disassemblies or repairs

(including, without limitation, the audition to the

Product of non-MOTOROLA supplied equipment).

f. Product which has had the serial number removed or made illegible.

g. Rechargeable batteries if:

1.Any of the seals on the battery enclosure of cells are broken or show evidence of tampering.

2.The damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.

h. Freight costs to the repair depot.

i. A Product which, due to illegal or unauthorized alteration of the software/firmware in the

Product, does not function in accordance with

MOTOROLA’S published specifications or the local type acceptance labeling in effect for the

Product at the time the Product was initially distributed from MOTOROLA.

j. Scratches or other cosmetic damage to Product surfaces that does not effect the operation of the

Product.

k. Normal and customary wear and tear.

l. Exclusion for defects or damage arising from use of the products in connection with non-MOTOROLA equipment.

VI. Patent and Software

Provisions:

MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following: a. That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim; b. That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and

119

Limited Warranty Motorola Communication Products (International) c. Should the Product or parts become, or in

MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the

Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.

MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement.

Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.

120

Patent and Trademark

Information

©

2003 Nextel Communications Inc. Nextel, the

Nextel logo, and all other Nextel product and/or service names referenced throughout this guide are either a trademark, service mark or registered trademark of Nextel Communications, Inc. All rights reserved.

MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2003

Motorola, Inc. All rights reserved.

Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation.

T9 is a trademark owned by Tegic Communications.

T9® Text Input Patent and Trademark Information

This product is covered by U.S. Pat. 5,818,437, U.S.

Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.

All other product names or services mentioned in this manual are the property of their respective trademark owners.

Software Copyright Notice

The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software.

Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law.

Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.

121

Patent and Trademark Information

122

Index

Numerics

3-way calling 74

A

Accessories 16 safety 111

Alpha mode 29

B

Backlight 84

Battery care 5 charging 4, 5 cover 2 inserting 3 safety 110

Baud rate 86

C

Call alerts 25 deleting 26 queue 25 receiving 25 responding 25, 26 sending 25 sorting 26 viewing 25

Call forwarding 53 all calls 53 missed calls 54 off 54

Call Hold 74

Call Timers 77

Call Waiting 73 off 73

Calls

3-way 74 answering automatically 85 answering with any key 84

Direct Connect 19, 22, 85 emergency 22 ending 19 entering number 20 from Contacts 21 from memo 39 from Recent calls 21

Group Connect 76, 85 icons 20 international 75 making 19, 76 on hold 74 phone calls 19 receiving 19, 76 redialing 22, 85

Speed Dial 22

TTY, see TTY calls

Turbo Dial 22

Circuit data 78

Clock 84

Contacts 21, 33 capacity 38 creating entries 35 deleting 37 editing entries 36 icons 33

International numbers 38 searching 34 showing all entries 35 showing only Direct Connect

35

SIM card 33 storing fast 36

123

Index storing from idle screen 37 storing from Memo 36, 39 storing from recent calls 27,

36 type 27, 33 viewing 34

Customer Care 17, 89

D

DC/GC Options 85 see also Direct Connect calls,

Group Connect calls, and call alerts

Dialing codes non-emergency numbers 80 telecommunications relay service 80

Direct Connect see also Calls

One Touch 22

One Touch, setting 75

Display backlight 84 contrast 84 options 9 screen 9

124

E

Email 33, 36, 78 receiving 51 sending 51

Emergency calls 22

End key 1

F

Faxes receiving 78 sending 78

Front cover 87

G

GPS Enabled 61 almanac data 65 best results 64 emergency calls 23, 62 map software 67 privacy options 66 security 66 viewing location 63

GPS PIN 86

GPS, see GPS Enabled

Group Connect, see calls

H

Handset, see phone

Headset 84

I

Icons calls 20

Contacts 33 main menu 10

Recent calls 27 status 11 text entry 29

Idle screen 9 storing to Contacts 37

International numbers 75 calling 75 storing 38

K

Keypad 1 locking 15, 86

L

Language 84

Lists, see menus

M

Memo 39 calling from 39 creating 39 editing 39 storing to Contacts 36, 39 viewing 39

Memory ring tones 59

Menu key 1, 10

Menus 9 context-sensitive 1, 10 main menu 10

Message notifications 49 setting options 49

Messages 49 see also mobile originated text messaging reading 51 receiving 49 text and numeric 50

Mute 22

N

Navigation key 1

Net alerts 51

Nextel

Customer Care 17, 89

Terms and conditions 93

Non-emergency numbers 80

Numeric mode 31

O

OARSS, see over-the-air programing 6

Over-the-air programming 6

P

Packet data 78

Password voice mail 42

Passwords 86

Patent information 121

Pauses dialing 75 storing 38

Phone 1, 9 active line 84 locking 86 modem 78 off 6 on 6 only 86 setting up 1, 8

Programming, over-the-air 6

PUK code 14

R

Radio frequency 105

Recent calls 21, 27 deleting 28 display time 86 icons 27 storing to Contacts 27, 36 viewing 27

Redialing 22, 85

Ring tones 33, 57 deleting 59 downloading 59 memory 59 off 57 setting 57 setting in Contacts 35, 58 vibrate 57 viewing assigned 58

125

Index

Ringer 83 see also Ring tones off 83

S

Safety 105 accessory 111 battery 110 electromagnetic interference

108 medical devices 108 radio frequency 105

Security 85

Send key 1

Service, activating 6

Settings 84 resetting 86

SIM card 3, 12, 14

Contacts 33 inserting 15 removing 15

SIM PIN 12, 86 changing 13 requirement 13 unblocking 14

126

Speed Dial 22, 34, 36

Status messages 91

Symbols mode 31

T

T9 Text Input, see text entry

Talkgroups 76, 85

TDD/TTY devices 80

Telecommunications relay service 80

Terms and conditions 93

Text display area 9, 20

Text entry 29

Alpha mode 29 database 29, 30 icons 29 mode 29

Numeric mode 31

Symbols mode 31

Word mode 29

Text messages 50

Trademark information 121

TTY calls 79 baud rate 80 making 79 mode 79 on 79

TTY devices 80

Turbo Dial 22

V

Voice Mail changing password 42 greetings 42 group lists 46 message forwarding 47 playing messages 41

Voice mail 50 receiving 50 sending calls to 19, 50 setting up 8, 41

Voice name 34

Volume, setting 83, 85

W

Waits dialing 75 storing 38

Warranty 117

Word mode 29

No results