Pittsburgh Automotive 46319 Owner's manual

Pittsburgh Automotive 46319 Owner's manual
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2017 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20e
Specifications
Weight Capacity
300 lb
Height Range
15" to 20"
Important Safety Information
Assembly Precautions
1.
Assemble only according to these
instructions. Improper assembly
can create hazards.
6.
Weight capacity and other product
capabilities apply to properly and
completely assembled product only.
2.
Wear ANSI-approved safety goggles
and heavy-duty work gloves
during assembly.
7.
3.
Keep assembly area clean and well lit.
4.
Keep bystanders out of the
area during assembly.
When servicing, use only identical
replacement parts. Use of any other
parts will void the warranty. Only use
accessories intended for use with
this tool. Approved accessories are
available from Harbor Freight Tools.
5.
Do not assemble when tired
or when under the influence of
alcohol, drugs, or medication.
8.
Do not expose to heat. Parts of
this product are under pressure.
9.
Once assembled, do not attempt
to take this product apart.
5.
Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
6.
Hold onto Seat as you sit down to
keep the Seat from rolling or tipping.
7.
To lower seat, sit on the Stool and pull
up on the Handle until you have lowered
the seat to the desired height. To raise
seat, stand next to the Stool and pull up
on the Handle. Release Handle when
Seat has risen to the desired height.
Use Precautions
1.
This product is not a toy. Do not allow
children to play with or near this item.
2.
Use as intended only.
3.
Inspect before every use; do not use
if parts are loose or damaged.
4.
Do not exceed listed weight capacity.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
Page 2
For technical questions, please call 1-888-866-5797.
Item 46319
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
1.
Place the Tool Tray on a
flat level surface.
3.
Place the Seat over the top
end of the Lifting Pole.
2.
Insert the large end of the Lifting
Pole into the round opening in
the center of the Tool Tray.
4.
Once the Seat is assembled, press
down in a controlled, firm manner
on the cushion to press the parts
together. Make sure Seat is properly
and firmly assembled before use.
Parts List and Diagram
Part
1
2
3
4
5
6
7
8
9
10
11
12
Description
Seat Cushion
Supporting Plate
Hub
Lifting Pole
Tool Tray
2-1/2" Caster
Handle
Screw M6x16
Nut M8
Lock Washer 08
Rivet 3x16
Flat Washer 08
Qty.
1
1
1
1
1
5
1
4
5
5
1
5
Record Serial Number Here:
Note: If product has no serial number,
record month and year of purchase instead.
Item 46319
Note: Some parts are listed and shown
for illustration purposes only, and are
not available individually as replacement
parts. Specify UPC 193175340764
when ordering parts.
For technical questions, please call 1-888-866-5797.
Page 3
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement