Astralpool Pool surround water jet Installation Manual
Below you will find brief information for Beach projector 34039, Anchoring 34040, Nozzle 34041-34042-34043-34044, Recommended pump 38774, Suction Concrete 19987, Suction Liner 20091, Push button 35762. This document details the installation of a AstralPool beach projector system, which is designed for use in swimming pools. The system includes a beach projector, anchoring, nozzles, a recommended pump, suction concrete, suction liner, and a push button. The system can operate with a total water pressure of 14 m.c.a., and the flow rate is 8-10 m/h. The suction tubing is 075 mm and the jet tubing is 063 mm.
Advertisement
Advertisement
Advertisement
Key Features
- Beach projector designed for use in swimming pools
- Anchoring system
- Nozzles
- Recommended pump
- Suction concrete
- Suction liner
- Push button
- Total water pressure of 14 m.c.a.
- Flow rate of 8-10 m/h
- Suction tubing is 075 mm
Frequently asked questions
What is the total water pressure required for the AstralPool beach projector system?
The system can operate with a total water pressure of 14 m.c.a.
What is the flow rate of the AstralPool beach projector system?
The flow rate is 8-10 m/h.
What is the size of the suction tubing used in the AstralPool beach projector system?
The suction tubing is 075 mm.
What is the size of the jet tubing used in the AstralPool beach projector system?
The jet tubing is 063 mm.