Shop Vac 610A Vacuum Cleaner Owner's Manual
Shop Vac 610A is a powerful and versatile wet/dry vacuum cleaner, ideal for both household and workshop cleaning tasks. With its durable construction and 6-gallon tank capacity, it can handle even the toughest messes. The Shop Vac 610A features a variety of attachments, including a hose, extension wands, a nozzle, a squeegee insert, and a brush insert, making it easy to clean hard-to-reach areas and different surfaces.
Advertisement
Advertisement
17
18
19
20
13
14
15
16
9
10
11
12
5
6
7
8
ITEM DESCRIPTION
22
23
24
1
2
3
4
21
Cover
Motor housing
Screw #8 x %" Ph pan hd., type AB
Power cord (12')
(18')
Switch
Strain relief bushing
Wire nut
Upper motor gasket
Ground screw
Motor
Lower motor gasket
Grid plate
Ball float
Lid latch
Lid cage & latch assembly
Cartridge filter
Foam sleeve
Filter retainer
Screw #10 x 1" hex head, type AB
Tank assembly (includes inlet)
(S.S.)
(painted)
Handle package (includes 2 handles and 4 mounting screws)
#10 x
3
/4" screw hex head
Inlet fitting
#10 x
5
/8" screw hex head
PART NO.
85550-01-0
88540-00-0
15063-99-3
04292-96-7
04293-96-5
82303-04-1
34004-99-4
05001-99-5
20700-00-1
17008--99-6
17300-97-1
20716-00-7
88607-00-7
00811-00-0
85501-01-3
89887-14-5
90304-62-7
90585-62-1
30080-00-6
15096-99-3
10466-97-7
51045-96-1
93551-96-8
15039-99-3
21720-01-6
15054-99-2
Standard Accessories:
12' (3.66 m) x 1
1
/ ' (3.81 cm) Hose
(2) 1
1
/2" (3.81 cm) Metal extension wands
14" (35.56 cm) Metal nozzle
14" (35.56 cm) Squeegee insert
14" (35.56 cm) Brush insert
SC87517-32
7
ITEM DESCRIPTION
9
10
11
6
7
8
3
4
5
1
2
Cap nut
8" Wheel
Axle
Rear frame
Caster socket
Front frame
#8 x
1
/2" lg. Screw
1
/4 - 20 x
3
/4" lg. machine screw
1
/4" Flatwasher
1
/4
- 20 Hex nut
Caster
PART NO.
43002-99-7
24250-10-2
24408-00-7
93921-96-3
75405-00-1
93920-00-7
15015-99-3
09029-99-2
07003-99-9
13001-99-5
67736-00-9
Dolly Assembly
1. Remove head from tank and place tank upside down on a flat surface.
2. Place wheels on rear frame/axle assembly with extended hub towards dolly frame and place cap nut on axle.
Secure with hammer.
3. Insert caster socket into front frame and secure with phillips head screw.
4. Place groove in front frame into lip of tank and position so frame is directly above inlet.
5. Position grooves of rear frame on lip of tank and align so rear and front frames engage.
6. Secure dolly frame to tank by placing machine screws up through holes in dolly frame.
Ensure head of screw is fully recessed in area provided.
After machine screw is inserted, tighten with flatwasher and hex nut.
7. Insert caster in caster socket and apply downward pressure until caster snaps into place.
8. Stand vacuum up on dolly. Place metal carriage handle between tank and side handles, and fasten tightly with screws provided. Be sure to spread ends of carriage handle when assembling to prevent damage to tank.
ITEM DESCRIPTION
1
2
3
Metal tank handle
Side tank handle
#10 x
3
/4" Screw hex head
PART NO.
20811-01-4
93551-00-0
15039-99-3

Public link updated
The public link to your chat has been updated.
Advertisement