advertisement
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ a
Digital Video Recorder
Quick Operation Guide
Aide-mémoire
Guía rápida de funcionamiento
DSR-3716
DSR-3709
English
Français
Español
■
This guide describes basic operations as a quick reference for your day-to-day monitoring tasks. For more information on use and configuration of the product, refer to the “Instruction Manual”, which is provided in a separate volume.
■
Cet aide-mémoire vous présente les fonctionnements de base pour faciliter vos tâches de surveillance journalière. Pour de plus amples informations sur l’utilisation et la configuration du produit, reportez-vous au “Manuel d’Instructions”, fourni séparément.
■
Esta guía describe las operaciones básicas y sirve como referencia rápida para las tareas de monitorización de cada día.
Para mayor información sobre el uso y la configuración del producto, consulte el “Manual de Instrucciones” suministrado por separado.
Contents
Setting Up the Digital Recorder ............................................................................................. 1
Using Various Split-Screens................................................................................................... 2
Recording Video....................................................................................................................... 3
Viewing Recorded Video......................................................................................................... 4
Using Date/Time Search to Play Back Recorded Video ..................................................... 6
Copying and Saving Recorded Video ................................................................................... 8
Printing Video Frames via a CompactFlash Card ............................................................... 9
About Configuration via Menus ........................................................................................... 10
GB
F
E
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 1
Setting Up the Digital Recorder
POWER indicator
2 5 2
–
4
S-dial
(SHUTTLE dial)
J-dial
(JOG dial)
1
Connect the supplied power cable.
a
The POWER indicator turns on, and a message “PLEASE
SET THE CLOCK” appears on the monitor screen.
2
Press the MENU button, and turn the S-dial three turns clockwise.
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
▼
<INITIAL SET>
1.LANGUAGE/CLOCK SET ->
2.CAMERA DETECT ->
3.TITLE SET ->
4.HOLIDAY SET ->
▼
<LANGUAGE/SPRACHE/IDIOMA>
ENGLISH
<CLOCK SET>
01-01-2006 SUN 00:00:00
<DAYLIGHT SAVING>
3
Turn the J-dial to select the display language, and then turn the S-dial.
Available languages include ENGLISH, FRANÇAIS, and
ESPAÑOL.
4
Turn the S-dial to set the clock.
J-dial: Turn to adjust the setting.
S-dial: Turn clockwise to save the setting.
Save
Month Day Year Hour Minute Second
10-26-2006 THU 08:30:00
Adjust
5
q
Press the EXIT/OSD button.
a
The operation display (status bar) appears on the monitor screen. w e r t y u
01-01-06 00:00:00 REC REPEAT EN A ALARM 0000
0
02
i q
Date display (Month - Day - Year) w
Time display e
Operation symbols (REC = recording, = playback, etc.) r
Remaining recording area t
Image quality display (BA = Basic, NO = Normal,
EN = Enhanced image quality, FI = Fine image quality,
SF = Super fine image quality) y
Sound recording/playback indicator (A) u
Alarm status (ALARM/PRE) and occurrence indicator i
Title indicator
¡
The operation display (status bar) moves to the bottom when you press the EXIT/OSD button once; is hidden when you press the button twice; and returns to the top when you press the button three times.
1
English
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 2
Using Various Split-Screens
1 6 2 3 4 5
■
To switch to another full-screen video:
1
Press the camera selection button (camera number) that corresponds to your desired camera.
■
To monitor four cameras at a time using the quad-screen display:
2
Press the QUAD button.
a
The quad-screen switches to display the next set of cameras each time you press the button.
01 02 13 14
■
To zoom in a particular camera view:
4
Press the PLUS button.
Multi-16 mode:
01
05
09
02
06
10
03
07
11
04
08
09
01
10
03
07
11
04
08
16 16
13 14
Multi-9 mode:
15 13 14 15
01 02
04
01 05
03 04 15 16
■
To monitor nine or sixteen cameras at a time using the multi-screen display:
3
Press the MULTI button.
a
The monitor screen toggles between the multi-9 and multi-16 screens each time you press the button.
01
04
07
02
05
08
03
06
09
01
05
09
13
02
06
10
14
03
07
11
15
04
08
16
¡
The DSR-3709 (9-channel model) supports only the multi-9 screen.
¡
To specify which camera view to zoom in, select the corresponding camera number using the camera selection button.
■
Automatic screen scrolling:
5
Press the SEQUENCE button.
01 15
02 16
¡
Press the button again to stop screen scrolling.
¡
When you press this button in the quad-screen, the quad-screen is automatically switched to display subsequent sets of cameras.
■
Viewing on the monitor connected to the
MON2 terminal:
6
Press the MON2 button, and then choose the camera to monitor using the camera selection button.
English
2
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 3
Recording Video
1, 2
1
Press the REC/STOP button while monitoring a camera.
a
The recorder starts recording the video from the current camera.
Indicates that recording is in progress.
10-26-06 09:30:00 REC REPEAT EN A
0
02
2
To stop recording, press and hold the REC/STOP button for about three seconds.
■
To use other recording types:
In addition to normal recording (which uses the normal recording area), the following recording types are available:
¡
Timer-controlled recording (using the normal recording area)
You can schedule a recording to occur at your specified times.
☞
See page 51 of the Instruction Manual.
¡
Alarm recording (using the alarm recording area)
The recorder automatically starts recording in response to an alarm input from an externally installed alarm switch or a motion sensor.
☞
See page 55 of the Instruction Manual.
¡
Pre-alarm recording (using the alarm recording area)
The recorder also records the image and sound for the period immediately before an alarm input to assist in analyzing the alarm condition.
☞
See page 57 of the Instruction Manual.
■
About the internal hard disk:
The internal hard disk has a set of preconfigured settings such as for the recording area allocations and recording modes. Make sure that these settings suit your purpose.
¡
Recording area settings
☞
See page 43 of the Instruction Manual.
Alarm recording area
Archive area
<RECORDING AREA SET>
TOTAL CAPACITY : 120GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
Normal recording area
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
¡
Recording mode settings (recordable duration indicator)
☞
See page 49 of the Instruction Manual.
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
REC RATE : 15 FPS ( 51H)
REC PROGRAM GROUP : OFF
¡
Overwrite settings
☞
See page 46 of the Instruction Manual.
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE : ON
ALARM RECORDING AREA
OVERWRITE : ON
REMAINING DISK WARNING : **
SERIES RECORDING : OFF
AUTO DELETE : OFF
3
English
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 4
Viewing Recorded Video
SHUTTLE HOLD button
1 2
S-dial
(SHUTTLE dial)
J-dial
(JOG dial)
■
To play back video in the full-screen display:
1
Press the PLAY/STOP button.
a
The video is played back from the point where recording started, and the operation display shows “ ”.
Playback indicator
0
10-26-06 09:30:00 REPEAT EN A
¡
When you press the SHUTTLE HOLD button during fast-forward/ fast-reverse playback, the recorder continues to fast-forward or fastreverse the playback without requiring you to hold the dial (Pressing the button again resets the playback to normal mode).
■
To view still image frames:
2
Press the STILL button during playback.
a
The recorder pauses to display the current frame as a still image, and the operation display shows “ ”.
Pressing the button again resets the playback to normal mode.
Still image indicator
10-26-06 09:30:00 REPEAT EN A ALARM 0000
02
¡
Use the camera selection button to select the camera whose video to play back.
¡
The recorder pauses playback once it has reached the end of the video, and the operation display shows “ ”.
¡
To stop playback, press the PLAY/STOP button again.
¡
Fast-forward/fast-reverse playback
During playback, you can turn the S-dial clockwise to fast-forward ( ) the playback or turn it counterclockwise to fast-reverse ( ) the playback.
¡
Releasing the dial resets the playback to normal mode.
Fast-forward indicator
10-26-06 09:30:00 REPEAT EN A ALARM 0000
02
¡
To scroll through the video frame by frame:
In still image mode, you can turn the J-dial clockwise to scroll through the video one frame forward or turn it counterclockwise to scroll through the video one frame backward.
02
English
4
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 5
Viewing Recorded Video
5 6 1, 4 2, 3
S-dial
(SHUTTLE dial)
J-dial
(JOG dial)
■
To zoom in on the displayed video:
1
Press the ZOOM button in playback or live mode.
2
A zoom frame appears in the center of the screen. Move the zoom frame to the desired position.
To move the frame horizontally, simply turn the J-dial clockwise or counterclockwise.
■
To display four playback views at a time using the quad-screen display (when multiple recorded video files are available):
5
Press the QUAD button.
a
Each time you press the button, the quad-screen switches to display the views for the next set of cameras.
01 02 13 14
Turn the S-dial clockwise to confirm the horizontal position.
Then, turn the J-dial to move the frame up or down.
03 04 15 16
■
To display nine or sixteen playback views at a time using the multi-screen display (when multiple recorded video files are available):
6
Press the MULTI button.
a
The monitor screen toggles between the multi-9 and multi-16 screens each time you press the button.
01
04
02
05
03
06
01
05
09
13
02
06
10
14
03
07
11
15
04
08
07 08 09
16
¡
The DSR-3709 (9-channel model) supports only the multi-9 screen.
3
Turn the S-dial clockwise.
a
The area enclosed by the zoom frame is enlarged by a factor of two.
4
To exit from zoom mode, press the ZOOM button again.
5
English
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 6
Using Date/Time Search to Play Back Recorded Video
1 2
–
7
S-dial
(SHUTTLE dial)
J-dial
(JOG dial)
1
Press the SEARCH button when recording is in progress or stopped.
▼
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
2
Turn the J-dial to choose “TIME/DATE SEARCH”, and then turn the S-dial clockwise.
▼
<TIME/DATE SEARCH>
RECORDING TOP : 10-01-06 14:46
RECORDING END : 10-30-06 13:32
CHANNEL : --
SEARCH :
DATE TIME
10-01-06 14:46
PREVIEW ->
VIEW ->
CHANGE:JOG SET:SHUTTLE
3
4
Turn the S-dial clockwise.
Turn the J-dial to select the desired camera number (CHANNEL), and then turn the S-dial clockwise.
5
Turn the S-dial clockwise, and specify the date and time to be used as the search criteria.
Save
Month Day Year Hour Minute
10-26-06 20:30
Adjust
6
Turn the S-dial clockwise with the cursor on
“PREVIEW”.
▼
<TIME/DATE SEARCH>
RECORDING TOP : 10-01-06 14:46
RECORDING END : 10-30-06 13:32
CHANNEL : 05
SEARCH :
DATE TIME
10-26-06 20:30
PREVIEW -> SEARCHING
VIEW ->
CHANGE:JOG SET:SHUTTLE
a
Upon completion of search, the preview screen appears.
7
Choose “VIEW” and turn the S-dial clockwise.
a
Full-screen display (when a CHANNEL is selected)
Multi-screen display (when no CHANNEL is selected)
¡
To cancel the search, press the SEARCH button again.
English
6
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 7
Using Date/Time Search to Play Back Recorded Video
■
Other Search Modes:
The SEARCH menu, shown in step 1 on the previous page, allows you to choose from various search modes.
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
¡
ALARM THUMBNAIL SEARCH
Searches for alarm-recorded video files (alarm recordings) and displays a thumbnail list of search results; from this list, you can pick any thumbnail to play back the corresponding video file.
MOVE:JOG SELECT:SHUTTLE
¡
ALARM SEARCH
Searches for alarm-recorded video files (alarm recordings) and displays a list of search results; from this list, you can select your desired video file and play it back. q w e r t
<ALARM SEARCH>
NO DATE TIME CH TOTAL ALARMS
0016 01-05 09:53 1 00016
0015 01-05 09:53 1
0014 01-05 09:53 1
0013 01-05 09:53 1
0012 01-05 09:52 1
0011 01-05 09:51 1
0010 01-05 09:51 1
0009 01-05 03:10 1
MOVE:JOG SELECT:SHUTTLE
q
Alarm number w
Alarm recording date and time e
Channel (camera number) r
Total number of alarm recordings t
Preview of your selected alarm recording
• Turn the J-dial to select your desired number and then turn the
S-dial clockwise to start playback.
• Turn the J-dial to select your desired thumbnail and then turn the
S-dial clockwise to start playback.
¡
ARCHIVE AREA SEARCH
Searches the archive area (
☞ see page 28 of the Instruction Manual) for stored video files and displays a list of search results; from this list, you can select your desired video file and play it back. q w e r t y u
<ARCHIVE AREA SEARCH>
NO DATE START CH CAPACITY
0001 01-01 01:48 1 TOTAL - 816MB
0002 01-05 09:53 1 USED - 16MB
0003 01-01 02:41 1
0004 01-02 03:10 1
0005 01-02 04:25 1
0006 01-04 02:40 1
0007 01-04 01:25 1
0008 01-04 01:25 1
MOVE:JOG SELECT:SHUTTLE
q
Archive number w
Recording date e
Recording start time r
Channel (camera number) t
Total capacity of the archive area y
Used space of the archive area u
Preview of your selected stored video
• Turn the J-dial to select the desired number and then turn the S-dial clockwise to start playback.
7
English
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 8
Copying and Saving Recorded Video
Camera selection button MULTI button
2 1 3
–
5, 7
CompactFlash card slot
S-dial
(SHUTTLE dial)
J-dial
(JOG dial)
1
Play back the video file you want to copy in the full-screen format, and press the STILL button as soon as your desired frame is displayed.
a
Playback pauses.
2
Press the COPY button, and turn the S-dial clockwise.
▼
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
COPY CH 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
SELECT COPY CHANNEL
COPY START ->
FORMAT/ERASE : COMPACT FLASH
FORMAT/ERASE START ->
3
Turn the J-dial to select “COPY TO”, and then turn the S-dial two turns clockwise.
ARCHIVE AREA:
Select this option when you want to temporarily save the video in the archive area on the hard disk.
COMPACT FLASH:
Select this option when you want to save the video on a
CompactFlash card.
¡
Insert your card into the CompactFlash card slot before selecting the COMPACT FLASH option.
¡
When your recorder is USB-connected with an optional CD-R/RW drive and you want to copy the video to the CD-R/RW drive, select the CD-R/RW option. This option will appear only if the CD-R/RW drive is connected.
4
Turn the J-dial to select the appropriate number that determines the range of frames to save, and then turn the S-dial clockwise.
5
Turn the J-dial to select the unit to identify whether the number you selected in the previous step is the number of pictures, seconds, minutes, or events, and then turn the S-dial clockwise.
PICTURES: Copies as many video frames as you specified.
SECONDS: Copies the video frames within the range you specified in seconds.
MINUTES: Copies the video frames within the range you specified in minutes.
EVENTS:
Copies archive area data that corresponds to the number of events you specified (this option is only displayed when you copy video from the archive area).
¡
Complete the HOW MANY field by specifying the number in step 4 and then specifying the unit in step 5 (For example, set this field to
“10PICTURES” to copy 10 frames in total from multiple channels;
“5SECONDS” to copy frames within 5 seconds). Copying is not possible if the specified frames or time do not reside within the allowable setting range.
6
Select your desired channel.
¡
Use the camera selection button to select a camera channel associated with the video you want to copy, or use the MULTI button to select all camera channels.
7
Turn the S-dial clockwise with the cursor on
“COPY START”.
a
The recorder starts copying the video. When the copy process completes, a “COPY FINISHED!” message appears.
¡
When you copy video frames, a viewer application named DVR
Viewer 2 is also copied (CF, CD-R/RW).
English
8
0̲3716QG̲US̲GB 05.11.11 1:41 PM ページ 9
Printing Video Frames via a CompactFlash Card
Camera selection button MULTI button
3 2 4
–
6, 8
CompactFlash card slot
S-dial
(SHUTTLE dial)
J-dial
(JOG dial)
1
2
Insert your card into the CompactFlash card slot.
Play back the video file you want to copy and print in the full-screen format, and press the
STILL button as soon as your desired frame is displayed.
a
Playback pauses.
3
Press the COPY button, and turn the S-dial clockwise.
▼
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
COPY CH 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
SELECT COPY CHANNEL
COPY START ->
FORMAT/ERASE : COMPACT FLASH
FORMAT/ERASE START ->
4
Turn the J-dial to choose “CF–>PRINT” as the destination (COPY TO), and then turn the S-dial two turns clockwise.
5
Turn the J-dial to select the appropriate number that determines the range of frames to copy and print, and then turn the S-dial clockwise.
6
Turn the J-dial to select the unit to identify whether the number you selected in the previous step is the number of pictures, seconds, minutes, or events, and then turn the S-dial clockwise.
PICTURES: Copies as many video frames as you specified.
SECONDS: Copies the video frames within the range you specified in seconds.
MINUTES: Copies the video frames within the range you specified in minutes.
EVENTS:
Copies archive area data that corresponds to the number of events you specified (this option is only displayed when you copy video from the archive area).
¡
Complete the HOW MANY field by specifying the number in step 5 and then specifying the unit in step 6 (For example, set this field to
“10PICTURES” to copy 10 frames in total from multiple channels;
“5SECONDS” to copy frames within 5 seconds). Copying is not possible if the specified frames or time do not reside within the allowable setting range.
7
Select your desired channel.
¡
Use the camera selection button to select a camera channel associated with the video you want to copy, or use the MULTI button to select all camera channels.
8
Turn the S-dial clockwise with the cursor on
“COPY START”.
a
The video frames are copied to the card so that they can be printed. Once the copy process completes, remove the card from the slot.
9
Insert the card into the slot of a printer that supports CompactFlash cards, and then print the video frames.
¡
Use the SANYO DVP-P1 Digital Photo Printer.
If you use a third-party printer, it is not guaranteed that the video frames are correctly printed.
9
English
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 10
About Configuration via Menus
1 5 2
–
4
S-dial
(SHUTTLE dial)
J-dial
(JOG dial)
■
Configuration Basics:
1
Press the MENU button.
▼
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
MOVE:JOG SELECT:SHUTTLE
2
Turn the J-dial to select the MAIN MENU, and then turn the S-dial clockwise.
1. INITIAL SET
Lets you configure “initial” settings such as display language and clock settings.
2. RECORD SET
Lets you configure recording-related settings that control the recording and alarm mechanisms.
3. GENERAL SET
Lets you configure general settings that control the display, alarm buzzer, security, and so on.
4. SCREEN SET
Lets you configure screen-related settings that control multi-screen display arrangements, automatic screen scrolling, color tone, and so on.
5. POWER LOSS/USED TIME
Displays when any power failure occurred, how long the hard disk has been in use, etc.
6. INITIALIZATION LOG
Displays the history of hard disk initialization.
7. COPY MENU SETTINGS
Allows you to save or load settings you configured via menus. a
Once you select a menu item, you are presented with the screen specific to that item.
<INITIAL SET>
1.LANGUAGE/CLOCK SET ->
2.CAMERA DETECT ->
3.TITLE SET ->
4.HOLIDAY SET ->
5.TIME PERIOD SET ->
MOVE:JOG SELECT:SHUTTLE
(This screen appears when you have selected “1. INITIAL
SET”.)
3
If you are presented with submenu items, turn the J-dial to select your desired submenu item, and then turn the S-dial clockwise.
a
Once you select a submenu item, you are presented with the screen specific to that item.
4
Configure each of the settings you want to change.
J-dial: Turn clockwise or counterclockwise to select an option or value.
S-dial: Turn clockwise to save your setting.
5
When you are done, press the EXIT/OSD button.
¡
For more information on each of the menu screens, refer to the
Instruction Manual.
¡
The following pages introduce most common menu-based configuration tasks; however, refer to the Instruction Manual for detailed configuration procedures.
English
10
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 11
About Configuration via Menus
3
4
■
To name a camera:
1
Press the MENU button to open the MAIN MENU screen, and choose “1. INITIAL SET”.
2
On the INITIAL SET screen, choose “3. TITLE
SET”.
Use the camera selection button to specify the number of camera you want to name.
You can enter a name using up to 10 characters by repeating the following operation: turn the
J-dial until your desired letter or number is displayed and then turn the S-dial clockwise.
<TITLE SET>
CAMERA NO.03 --------03
5
When you are done, press the EXIT/OSD button.
3
4
■
To configure easy recording settings based on your desired recording duration (in units of days):
1
Press the MENU button to open the MAIN MENU screen, and choose “2. RECORD SET”.
2
On the RECORD SET screen, choose “1. NORMAL
REC EASY SET”.
On the NORMAL REC EASY SET screen, choose
“RECORDING DURATION BASE”.
Configure the recording duration and other settings as needed.
<RECORDING DURATION BASE>
RECORDING DURATION : -- DAYS
TIMER RECORDING(DLY) : OFF
START --:-- STOP --:--
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
NUMBER OF CAMERAS : 2
REC RATE : ------FPS/CAM
q w e r t y
6
7
q
Allows you to set the recording duration in units of days.
w
Allows you to turn on or off the timer-controlled recording mechanism. e
Allows you to set the image quality. r
Allows you to turn on or off the sound recording mechanism.
t
Shows the number of cameras.
y
Shows the recording rate.
5
When you are done, turn the S-dial counterclockwise.
a
A WARNING screen appears.
Turn the J-dial to choose “YES”, and then turn the S-dial clockwise.
When you are done, press the EXIT/OSD button.
11
English
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 12
About Configuration via Menus
3
4
■
To configure easy recording settings based on your desired recording rate:
1
Press the MENU button to open the MAIN MENU screen, and choose “2. RECORD SET”.
2
On the RECORD SET screen, choose “1. NORMAL
REC EASY SET”.
On the NORMAL REC EASY SET screen, choose
“REC RATE BASE”.
Configure the recording rate and other settings as needed.
<REC RATE BASE>
REC RATE : ----- FPS/CAM
TIMER RECORDING(DLY) : OFF
START --:-- STOP --:--
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
NUMBER OF CAMERAS : 2
RECORDING DURATION : ---- DAYS
q w e r t y
6
7
q
Allows you to set the recording rate.
w
Allows you to turn on or off the timer-controlled recording mechanism. e
Allows you to set the image quality. r
Allows you to turn on or off the sound recording mechanism. t
Shows the number of cameras. y
Shows the recording duration.
5
Turn the S-dial counterclockwise.
a
A WARNING screen appears.
Turn the J-dial to choose “YES”, and then turn the S-dial clockwise.
When you are done, press the EXIT/OSD button.
■
To configure the hard disk recording area allocations:
Configuring this setting erases any existing recording data.
1
2
3
Press the MENU button to open the MAIN MENU screen, and choose “2. RECORD SET”.
On the RECORD SET screen, choose
“2. RECORDING AREA SET”.
Change the normal and alarm recording area allocations.
q w e
<RECORDING AREA SET>
TOTAL CAPACITY : 120GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
q
Shows the total capacity of the hard disk. w
Allows you to set the normal recording area allocation. e
Allows you to set the alarm recording area allocation.
4
When you are done, turn the S-dial counterclockwise.
a
A WARNING screen appears.
5
Turn the J-dial to choose “YES”, and then turn the S-dial clockwise.
a
The recording area allocations are changed and the hard disk is initialized.
6
When you are done, press the EXIT/OSD button.
English
12
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 13
About Configuration via Menus
2
3
■
To configure the recording mechanism not to overwrite existing data when the recording areas are full:
1
Press the MENU button to open the MAIN MENU screen, and choose “2. RECORD SET”.
On the RECORD SET screen, choose
“3. RECORDING CONDITIONS SET”.
Set OVERWRITE to OFF for each of the normal and alarm recording areas.
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE : ON
ALARM RECORDING AREA
OVERWRITE : ON
REMAINING DISK WARNING : **
SERIES RECORDING : OFF
AUTO DELETE : OFF
4
When you are done, press the EXIT/OSD button.
2
3
■
To schedule the recorder to perform timercontrolled recording during the same hours and at the same rate every day:
1
Press the MENU button to open the MAIN MENU screen, and choose “2. RECORD SET”.
On the RECORD SET screen, choose “6. TIMER
SET”.
Configure the timer-controlled recording settings.
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 15 FPS OFF
MON --:-- --:-- OFF 15 FPS OFF
TUE --:-- --:-- OFF 15 FPS OFF
WED --:-- --:-- OFF 15 FPS OFF
THU --:-- --:-- OFF 15 FPS OFF
FRI --:-- --:-- OFF 15 FPS OFF
SAT --:-- --:-- OFF 15 FPS OFF
DLY --:-- --:-- OFF 15 FPS OFF
EXT ***** ***** OFF 15 FPS OFF
Example: To schedule the recorder to perform timer recording during the hours from 8:30 to 18:30 at the recording rate of 15FPS every day, configure the settings as follows:
DLY 08:30 18:30 OFF 15 FPS ON
4
5
Press the EXIT/OSD button.
Press the TIMER button.
TIMER a
The indicator turns on, and the timer-controlled recording is put into standby. At the specified time, the timercontrolled recording will start.
13
English
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 14
About Configuration via Menus
■
To configure pre-alarm recording:
1
Press the MENU button to open the MAIN MENU screen, and choose “2. RECORD SET”.
2
3
On the RECORD SET screen, choose “7. ALARM
REC MODE SET”.
Set “ALARM RECORDING” to “ENABLED”.
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 15 FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: **** FPS, DURATION: ****
=> (01731 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
4
5
6
7
Set “PRE-ALARM RECORDING” to “ON”.
A WARNING screen appears. Choose “YES”, and then turn the S-dial clockwise.
Configure the recording rate and duration.
When you are done, press the EXIT/OSD button.
■
To change the items indicated on the operation display (status bar):
1
Press the MENU button to open the MAIN MENU screen, and choose “3. GENERAL SET”.
2
3
On the GENERAL SET screen, choose
“1. DISPLAY SET”.
Specify whether to show or hide each item by choosing either ON or OFF.
<DISPLAY SET>
DATE : ON
TIME : ON
QUALITY : ON
AUDIO : ON
ALARM COUNT : ON
ALARM TYPE : ON
TITLE : ON
VIDEO LOSS : ON
4
When you are done, press the EXIT/OSD button.
■
To configure the passwords:
1
Press the MENU button to open the MAIN MENU screen, and choose “3. GENERAL SET”.
2
3
On the GENERAL SET screen, choose
“3. SECURITY LOCK SET”.
Configure each of the two passwords.
(Each password can consist of 4 to 8 alphanumeric characters.)
q e w r
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8) USE
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : ADMIN
CAMERA CONTROL : ADMIN
4
5
q
Allows you to configure the administrator password. w
Allows you to configure the user password.
e
Allows you to specify the access level required to perform recording tasks (ADMIN/USER). r
Allows you to specify the access level required to perform camera control tasks (ADMIN/USER).
Press the EXIT/OSD button.
Press and hold the SHUTTLE HOLD for about three seconds.
SHUTTLE HOLD a
The LOCK indicator turns on to indicate that the security lock is turned on.
¡
Subsequent operations require the entry of the correct password as appropriate.
English
14
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 15
About Configuration via Menus
■
To initialize the hard disk:
1
Press the MENU button to open the MAIN MENU screen, and choose “3. GENERAL SET”.
2
3
On the GENERAL SET screen, choose “4. HDD
SET”.
Choose “DISK INITIALIZE” and turn the S-dial clockwise.
<HDD SET>
DISK1 : 120GB
DISK2 : ---GB
DISK INITIALIZE ->
CAUTION : ALL RECORDING WILL BE ERASED!
MIRRORING : OFF
PLAYBACK DRIVE : ***
CAUTION : RECORDING SPEED WILL BE
LIMITED BY MIRRORING!
4
A WARNING screen appears. Choose “YES”, and then turn the S-dial clockwise.
a
The hard disk is initialized.
5
When you are done, press the EXIT/OSD button.
■
To remotely control an optional dome camera:
¡
This procedure assumes that your recorder is connected with an optional dome camera that can be remotely controlled.
1
2
3
Press the MENU button to open the MAIN MENU screen, and choose “3. GENERAL SET”.
On the GENERAL SET screen, choose
“7. CAMERA CONTROL SET”.
On the CAMERA CONTROL SET screen, choose
“1. PROTOCOL/ADDRESS SET”.
4
Select the channel to which the dome camera is connected, and turn the S-dial clockwise.
<PROTOCOL/ADDRESS SET>
CH PROTOCOL ADD. CH PROTOCOL ADD.
0 1 SANYO COAX1 001 09 OFF ---
02 SANYO RS485 002 10 OFF ---
03 OFF --- 11 OFF ---
04 OFF --- 12 OFF ---
05 OFF --- 13 OFF ---
06 OFF --- 14 OFF ---
07 OFF --- 15 OFF ---
08 OFF --- 16 OFF ---
5
6
7
Configure the protocol settings.
When you are done, press the EXIT/OSD button.
Press the FUNC. Button, and remotely control the dome camera using the buttons on the panel
(Available in the full-screen display).
FUNC.
¡
The buttons available for remote control are identified by the labels beneath them.
r t y u i !1
FUNC.
PRESET AUTO PAN
SEQUENCE TOUR
MENU ENTER AF
IRIS
FOCUS
ZOOM/I/FO
q w e o !0
q
Preset button (PRESET) w
Sequence button (SEQUENCE) e
Tour button (TOUR) r
Automatic panning button (AUTO PAN) t
Menu button (MENU) y
Confirmation button (ENTER) u
Autofocus button (AF) i
Iris button (IRIS) o
Focus button (FOCUS)
!0
Zoom/Iris/Focus button (ZOOM/I/FO)
!1
Pan dial (PAN)
!2
Tilt dial (TILT)
PAN
!2
15
English
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 16
About Configuration via Menus
■
To change the automatic scrolling interval:
1
Press the MENU button to open the MAIN MENU screen, and choose “4. SCREEN SET”.
2
On the SCREEN SET screen, choose “2. SEQUENCE
SET”.
¡
If you want to specify different scrolling interval for each camera, choose “INDIV.” for “2. SEQUENCE”.
3
Set the scrolling interval.
<SEQUENCE SET>
MAIN MON. FULL : 1SEC
QUAD : 1SEC
MON.2 FULL : 1SEC
INDIVIDUAL INTERVAL (SEC)
01: 1 02: 1 03: 1 04: 1
05: 1 06: 1 07: 1 08: 1
09: 1 10: 1 11: 1 12: 1
13: 1 14: 1 15: 1 16: 1
4
When you are done, press the EXIT/OSD button.
■
To adjust the live video color tone:
1
Press the MENU button to open the MAIN MENU screen, and choose “4. SCREEN SET”.
2
3
On the SCREEN SET screen, choose “4. COLOR
LEVEL SET”.
Use the camera selection button to specify the number of camera whose color tone you want to adjust.
4
Set the color tone.
The higher the value is, the more dense the image will be.
<COLOR LEVEL SET>
■
To check when any power failure occurred or how long the hard disk has been in use:
1
Press the MENU button to open the MAIN MENU screen, and choose “5. POWER LOSS/USED
TIME”.
2
Review the information on the screen.
q w e
<POWER LOSS/USED TIME>
POWER LOSS RECOVER
#011 01-14 19:15 01-15 09:55
01-13 21:13 01-14 09:21
01-03 18:48 01-05 08:56
01-01 09:49 01-03 10:32
USED TIME DISK1 USE : 00096H
DISK2 USE : -----H
POWER : 00096H
F/W: M 0.30-00 / S 0.20-04
q
Power failure information (number of occurrences) w
Date/time at which the power was lost and restored (for the most recent four occurrences) e
Hard disk in-use time and DVR power-on time
3
When you are done, press the EXIT/OSD button.
■
To review the initialization log:
1
Press the MENU button to open the MAIN MENU screen, and choose “6. INITIALIZATION LOG”.
2
Review the information on the screen.
q w e
<INITIALIZATION LOG>
DATE TIME AREA
11-10 11:55 ALL AREAS (INITIALIZED)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
----- --:-- ------ (------)
CH02 COLOR LEVEL : 5
5
When you are done, press the EXIT/OSD button.
q
Date/time at which the disk was initialized w
Initialized area e
Description
3
When you are done, press the EXIT/OSD button.
English
16
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 17
About Configuration via Menus
1
2
■
To copy the settings you configured via menus:
When you are using more than one recorders, you can copy the settings you configured via menus on the main recorder and load the settings onto sub recorders so that you can easily and quickly configure them.
Insert a CompactFlash card into the
CompactFlash card slot of the main recorder.
Press the MENU button to open the MAIN MENU screen, and choose “7. COPY MENU SETTINGS”.
q w e r
<COPY MENU SETTINGS>
DVR TYPE VER. SA16-04
SAVE MENUS TO CF ->
LOAD MENUS FROM CF ->
COPY RECORDING AREA SETTINGS: NO
*IF YOU CHOOSE "YES" OF THE ABOVE MENU,
HARD DISK WILL BE INITIALIZED !
6
7
8
3
4
q
Shows the firmware version number.
w
Allows you to save the settings onto the card.
e
Allows you to load the settings from the card.
r
Allows you to copy the recording area settings as well.
¡
If you set this option to YES and load the settings from the card, existing video data are erased (the hard disk is initialized).
(Available when loading the settings from a CompactFlash card.)
Choose “SAVE MENUS TO CF” and turn the S-dial clockwise.
A WARNING screen appears. Choose “YES”, and then turn the S-dial clockwise.
a
The settings will be saved onto the card.
5
Remove the card from the main recorder, and insert it into the CompactFlash card slot of the destination recorder.
Press the MENU button to open the MAIN MENU screen, and choose “7. COPY MENU SETTINGS”.
Choose “LOAD MENUS FROM CF” and turn the
S-dial clockwise.
A WARNING screen appears. Choose “YES”, and then turn the S-dial clockwise.
a
The settings you configured via menus are loaded onto the destination recorder.
17
English
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project