Notrax Notrax - 109S0035CH 109 Brush Step Entrance Mat, For Home or Office, 3' X 5' Charcoal Specification

Notrax Notrax - 109S0035CH 109 Brush Step Entrance Mat, For Home or Office, 3' X 5' Charcoal Specification
ce
ctive
109 Brush Step®
Entrance Matting
Good
Better
Test
Test Description
*Results
Abrasion Resistance
ASTM D3884-01
Test specimen is subjected to the rubbing action of two
abrading wheels under controlled conditions.
Results measured in Weight loss (Grams)
1.15
Accelerated Wear
Accelerated Soiling
ASTM D6540-00
Test specimen is subjected to the action of rollers under a
specified load. Sample is rotated 10º after each pass.
Results measured in thickness loss (%)
Test specimen is subjected to an accelerated soiling process. for
a predetermined length of time. The sample is vacuumed, rated,
submitted to an extraction device, then rated again.
Test specimen is submerged in water for 5 minutes,
removed, drained for 15 seconds and weighed.
Results measured in weight gain. (Gallons per sq. yd.)
Water Retention
Flammability
ASTM D2859 (CPSC FF 1-70)
Intended to measure the mattings response to an ignition
source in a controlled environment. The uncharred area of
the test specimen must be greater than 1 inch to pass.
*All testing of NoTrax® floor matting has been performed by an independent testing laboratory.
AATCC Rating Key
(For Accelerated Soiling Test)
5
3
2
1
custom
No change
anti-fatigue
Slight change
Noticeable change
Considerable change
Severe change
drainage
Custom Lengths
logo
Superior
B rush Step® features a lighter-weight double rib
high/low design that performs the scraping
function of the mat. The ribbed surface brushes,
channels, and conceals dirt and debris and is the
perfect choice for light to medium traffic areas.
Available Colors: Slate Blue, Charcoal, Brown,
Red/Black, Hunter Green
anti-slip
4
Best
anti-static
• Face Weight: 19 oz. per sq. yd.
• Thickness: 3/8”
• Weight: .77 lbs sq./ft.
• Vinyl Backing reduces mat movement
• Backing Thickness: 70 +/- 4 Mils
food processing
• Stock Sizes: 2’ x 3’, 3’ x 4’, 3’ x 5’, 3’ x 6’, 3’ x 10’,
welding
4’ x 6’, 4’ x 8’
• Roll Sizes: 3’ x 60’, 4’ x 60’, 6’ x 60’
• Custom Sizes available in 3’, 4’, and 6’ widths
38.66%
(Based on visual inspection)
4.0 - Vacuum Rating
4.5 - Rating After Extraction
.25
3.5 Inches
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement