Lenovo IdeaCentre K210 Installation Manual

Add to My manuals
1 Pages

advertisement

Lenovo IdeaCentre K210 Installation Manual | Manualzz

Installation Guide for Lenovo Bright Eye Camera (This camera can also be used as a common camera)

To install Lenovo Bright Eye camera, do the following:

1

[J1]

3 5

S-1

S-2

S-3

J1- Four securing latches on the front side of the camera base

There are four securing latches on the front side of the camera base. Align the four latches to the four slots on the top of computer display.

S-5

S-4

2

(1)

Move the camera with the camera bracket into the base along the glide rail of the base to install the camera.

(2)

4

S-1 Lens roller —— used to adjust the pitch angle of the lens

S-2 Power LED —— used to indicate when the computer is powered on

S-3 Lens of the camera

S-4 Camera bracket

S-5 USB cable —— used to connect the camera to the computer

Note:

Press “Push” to move the camera upward and eject the lens to start the camera.

Press “Push” again to move the camera downward and hide the lens to shut down the camera.

Embed the four securing latches of the camera base into the four slots, and then push the case downward until it is locked. After that, the camera base is secured onto the display.

If the camera is not in use, turn it leftward or rightward to hide it.

31032935

Bright Eye-test.indd 1 2007.12.27 9:45:03 AM

advertisement

Related manuals

Download PDF

advertisement