Binary B-260-444-HDR-SP18 4K HDR HDMI Splitter Quick Start Guide

Add to My manuals
12 Pages

advertisement

Binary B-260-444-HDR-SP18 4K HDR HDMI Splitter Quick Start Guide | Manualzz

Binary

TM

4K HDR HDMI Splitter | 1x4, 1x8

B-260-444-HDR-SP14

B-260-444-HDR-SP18

INSTALLATION

MANUAL

Source | Mute | 2ch

(HDMI Out Audio)

2

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this manual. Keep this manual for future reference.

1. Do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the equipment. Do not use this apparatus near water.

2. Do not remove cover. No user serviceable parts inside.

3. Clean only with a dry cloth.

4. Do not block any ventilation openings. Install according to manufacturer’s instructions.

5. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

6. Do not override the safety purpose of the polarized or grounding plug.

A polarized plug has two blades, one of which is wider than the other. A grounding plug has two matching blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

7. Protect the power cord from being walked on or pinched, particularly at the plug end and where the power cord is attached to the apparatus.

8. Only use attachments and accessories specified by the manufacturer.

9. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled on or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, the apparatus does not operate normally, or it has been dropped.

10. To completely disconnect this equipment from power, disconnect the power supply cord from the power outlet.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRICAL SHOCK.

DO NOT REMOVE COVER. NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

3

1. PRODUCT OVERVIEW

Welcome to Binary™. This product is engineered to provide years of exceptional reliability. We appreciate your business, and we stand committed to providing our customers with the highest degree of quality and service in the industry.

This unit is HDCP 2.2 compatible and supports all HDMI 2.0b defined audio and video formats including 4K@ 60Hz 4:4:4 and HDR formats. The Binary 260 series 1×4 and

1×8 splitter features full 18Gbps content support and independent control of the audio and video portions of the EDID for ultimate in troubleshooting and reliability.

2. FEATURES

• Splits a single HDMI input signal to 4 or 8 HDMI outputs

• Supports HDMI 2.0b and is HDCP 2.2 compatible

• Full 18Gbps bandwidth support for 4K@60Hz 4:4:4 and HDR formats including

Dolby Vision @60Hz and HDR10

• Audio and Video EDID control

3. PACKAGE CONTENTS

• 1x B-260-444-HDR-SP14 or B-260-444-HDR-SP18

• 1x 12V DC power adapter

• 4x Rubber Feet

• 1x Installation Manual

• 2× L-Brackets

• 4× Bracket Screws

4

4. DEVICE LAYOUT

Front

A B

Back

POWER IN

C

D

OUT 1 OUT 2 OUT 3 OUT 4

Up

Down

1 2 3 4

V. EDID

B-260-444-HDR-SP14

E

Up

Down

1 2 3

A. EDID

HDMI OUT 1 HDMI OUT 2 HDMI OUT 3 HDMI OUT 4

F

G H

FIGURE 1:

Device Annotations

A. Power LED

Indicates that device is receiving power

B. Input LED

Indicates signal transfer over the input port

C. LEDs for Outputs 1–4 (8 for B-260-444-HDR-SP18)

Indicates signal transfer over output ports

D. Video. EDID Dip Switches

Control Video EDID with Auto, Copy as well as specific video formats. See Section 7

If the dip switches are in different positions, the source device handshakes the custom

EDID in the splitter

E. Audio. EDID Dip Switches

Control Audio EDID with Passthrough, Copy as well as specific audio formats. See

Section 7 If the dip switches are in different positions, the source device handshakes the custom Audio EDID in the splitter

F. HDMI Outputs 1–4 (8 for B-260-444-HDR-SP18)

Connect HDMI cables to local display

G. HDMI Input

Connect HDMI cable from source

H. Locking Power Supply

Connect the included 12V power supply to this port

5

5. INSTALLATION AND CONNECTIONS

1. Connect an HDMI cable from a source to the B-260-444-HDR-SP14 or

B-260-444-HDR-SP18 to HDMI IN.

Note:

B-260-444-HDR-SP14 shown unless otherwise noted.

2. Connect an HDMI cable from each HDMI OUT to the HDMI IN on a TV, projector or other AV device.

3. Set DIP switches based on the application requirements.

4. Apply power to the unit by connecting the provided 12V DC power supply.

5. Turn on sources, TVs and other devices in the system.

B-260-444-HDR-SP14

HDMI OUT 1 HDMI OUT 2 HDMI OUT 3 HDMI OUT 4

Power Supply

UHDTV UHDTV UHDTV UHDTV

Source

6

6. APPLICATIONS

6.1. Basic Splitter

Up

Down

Auto

1 2 3 4

V. EDID

Passthrough

Up

Down

1 2 3

A. EDID

DIP Switch

Settings

POWER IN OUT 1 OUT 2 OUT 3 OUT 4 OUT 5 OUT 6 OUT 7 OUT 8

Up

Down

Up

Down

1 2 3

A. EDID

HDMI OUT 1 HDMI OUT 2 HDMI OUT 3 HDMI OUT 4 HDMI OUT 5 HDMI OUT 6 HDMI OUT 7

B-260-444-HDR-SP18

HDMI OUT 8

4K HDR

Display

4K HDR

Display

4K HDR Source

(Auto)

7

7. DIP SWITCH SETTINGS

7.1. Video EDID

Video EDID

EDID Copy (Output 1)

1080p SDR

1080p HDR

4K@30Hz SDR

4K@30Hz HDR

4K@60Hz 4:2:0 SDR

4K@60Hz HDR

Auto

8

Up

Down

Up

Down

Up

Down

Up

Down

Up

Down

Up

Down

Up

Down

Up

Down

1 2 3 4

1

2

3

4

1

1

1

1

1

1

2

3

4

2

2

2

2

2

3

3

3

3

3

• •

4

4

4

4

4

7.2. Audio EDID

Audio EDID

EDID Copy (Output 1)

2CH (PCM)

6CH

8CH

Passthrough

Up

Down

Up

Down

Up

Down

Up

Down

Up

Down

1 2 3

1

2

3

1

1

1

2

3

2

3

2 3

• •

9

8. SPECIFICATIONS

Technical

HDMI Compliance

HDCP Compliance

Maximum Bandwidth

HDR Support

Video Resolution

HDMIAudio Formats

Audio Sampling Rate

Bit Rate

ESD Protection

HDMI 2.0b

HDCP 2.2

18 Gbps

HDR10, Dolby Vision 60 Hz

(up to 4:4:4)

4096×2160@24/25/30/50/60Hz

3840×2160@24/25/30/50/60Hz, 2048x1080p,

[email protected]/24/25/29.97/30/50/59.94/60Hz,

1080i@50/59.94/60Hz,

720p@50/59.94/60Hz, 576p, 576i, 480p, 480i

PCM 2CH, LPCM 7.1/5.1CH, Dolby Digital, DTS 5.1,

Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio,

Dolby Atmos and DTS:X

32KHz, 44.1KHz, 48KHz, 88.2KHz, 96KHz,

176.4KHz,

192KHz

Up to 24Hz

Human body model: ±15kV (air-gap discharge) &

±8kV (contact discharge)

Connections

HDMI IN/OUT

Distance

Input Ports

Output Ports

Controls

V. EDID DIP switch

A. EDID DIP switch

4K to 5m (15ft)

1080p to 10m (30 ft)

1×HDMI TypeA (19-pin female)

4 or 8 ×HDMI Type A (19-pin female)

Sets max Video portion EDID accepted by splitter

Sets max Audio portion of EDID accepted by the splitter

10

Mechanical

Housing

Dimensions

Weight

Power Supply

Power Consumption

Operation

Temperature

Storage Temperature

Relative Humidity

Certifications and

Compliance

Metal enclosure

B-260-444-HDR-SP14 6.42” (L) × 2.5” (W) × 0.63” (H)

B-260-444-HDR-SP18 9.6” (L) × 4.02” (W) × 0.63” (H)

B-260-444-HDR-SP14

B-260-444-HDR-SP18

0.57 lbs (0.26kg)

1.26 lbs (0.572kg)

Locking 12V DC, 2A

5W (max)

32

104°F

-4

140°F

20

90% RH (no condensation)

Product: CE, FCC

Power Supply: CE, FCC, UL

11

9. WARRANTY

This Binary product has a 2-Year limited warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

10. SUPPORT

866.838.5052

www.snapav.com

Rev: 190214-1600

© 2019 Binary

advertisement

Related manuals

Download PDF

advertisement