HDMI 1x4 Splitter

B-230-HDSPLTR-1x4

INSTALLATION

MANUAL

HDMI OUT 1

HDMI OUT 1

HDMI OUT 2

HDMI OUT 2

HDMI OUT 3

HDMI OUT 3

HDMI OUT 4

B-230-HDSPL

TR-1x4

HDMI OUT 4

HDMI IN

HDMI IN

Source | Mute | 2ch

(HDMI Out Audio)

2

IMPORTANT SAFETY INSTRUCTIONS

1. Read and follow all instructions and warnings in this manual. Keep for future reference.

2. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers).

3. Do not install the unit near water or where moisture is present.

4. Clean with a dry cloth.

5. Unplug this apparatus during lightning storms or when unused for long periods of time.

6. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where it exits from the apparatus.

7. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

8. To completely disconnect this equipment from the AC mains, disconnect the power supply cord plug from the AC receptacle.

CAUTION:

To reduce the risk of electrical shock, inspect the premises carefully. Do not use the unit if proper equipment grounding cannot be verified.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRICAL SHOCK.

DO NOT REMOVE COVER. NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

3

CONTENTS

1. Product Overview......................................................................................................5

2. Contents ........................................................................................................................5

3. Features .........................................................................................................................5

4. Device Layout ..............................................................................................................6

5. Installation and Connections ................................................................................7

6. EDID Configuration

..................................................................................................8

7. Specifications

...............................................................................................................9

8. Contacting Tech Support ........................................................................................10

9. Warranty .......................................................................................................................10

4

1. PRODUCT OVERVIEW

Welcome to Binary™. This product is engineered to provide years of exceptional reliability. We appreciate your business, and we stand committed to providing our customers with the highest degree of quality and service in the industry.

This HDMI Splitter supports HDMI 1.4, 10.2 Gbps Bandwidth, WUXGA, and 1080P

Deep Color.

2. CONTENTS

• (1) HDMI Splitter, 1X4

• (1) 5V DC power adapter

• (1) Installation Manual

3. FEATURES

• Auto EDID configured

• Multiple Cascade - When needed this unit can cascade (daisy chain) to allow installation flexibility

• 10.2 Gbps Bandwidth - Supports 7.1 channel surround sound high bit rate audio, plus Deep Color Full HD 1080p color

• Supports HDMI or DVI inputs

• HDCP 1.4 compliant

5

4. DEVICE LAYOUT

A

B C

HDMI OUT 1 HDMI OUT 2 HDMI OUT 3 HDMI OUT 4 HDMI IN

+5 VDC

A. HDMI Output 1- 4

Connect HDMI cables to local display

B. HDMI Input

HDMI OUT 1 HDMI OUT 2 HDMI OUT 3 HDMI OUT 4

C. Power Supply (5V DC)

OFF

UPDATE

POWER IN OUT 1 OUT 2 OUT 3 OUT 4

Connect the included 5V power supply to this port

D E G

H

HDMI IN

On

Off

1 2 3 4

+5 VDC

EDID

ON

OFF

UPDATE

POWER IN OUT 1 OUT 2 OUT 3 OUT 4

On

Off

1 2 3 4

EDID

F I

D. Power On/Off Switch

Lights up blue when power is on and lights up red when in stand-by.

E. Update (mini USB port)

To connect mini USB cable when updating firmware

F. Power LED

Indicates that device is receiving power

G. Input LED

Indicates signal transfer over the input port

H. LEDs for Outputs 1 through 4

Indicates signal transfer over output ports

I. Dip Switches

AUTO EDID selects the lowest common EDID between the four output ports to send to the source

Output EDID reports the EDID from output 1 to the source

6

5. INSTALLATION AND CONNECTIONS

HDMI

Source

B-230-HDSPLTR-1x4

HDMI OUT 1 HDMI OUT 2 HDMI OUT 3 HDMI OUT 4 HDMI IN

+12 VDC

AC

Power

TV TV TV TV

1. Place the unit where it will be installed.

2. Connect the HDMI cable from the source to the HDMI IN of the splitter.

3. Connect the HDMI cable from the HDMI OUT of the splitter to the Display/

Receiver to the devices.

4. Connect the power to the B-230-HDSPLTR-1x4.

5. Turn on the source and devices.

7

6. EDID CONFIGURATION

Resolution

Auto

Last Output

1080i@60Hz HD Audio

1080i@60Hz 24-Bit 7.1 ch

1080i@60Hz 24-Bit 2ch

1080p@60Hz HD Audio

1080p@60Hz 24-Bit 7.1 ch

1080p@60hz 24bit 2ch

1080p@60Hz 3D HD Audio

1080p@60Hz 24-Bit 3D 2ch

1080p@60Hz 24-Bit 3D 7.1 ch

DIP Switch Position

1 2

Up

Down

Up

Down

Down

Down

Down

Down

Down

Up

Up

Down

Up

Up

Up

Up

Down

Down

Up

Down

Up

Down

Up

Up

Up

Down

Up

Down

3

Up

Down

Up

Down

Down

Up

Down

Down

Up

Up

Down

4

Up

Down

Down

Up

Down

8

7. SPECIFICATIONS

Technical

HDMI Compliance

HDCP Compliance

Video Bandwidth

Input TMDS Signal

Input DDC Signal

ESD Protection

HDMI 1.4

HDCP 1.4

10.2 Gbps

1.2V (peak-to-peak)

5V (peak-to-peak, TTL)

(1) Human body model: ±15kV (air-gap discharge) &

±8kV (contact discharge) (2) Core chipset — ±8kV

Connections

HDMI 5x HDMI Type A

(19-pin female)

Controls

DIP switch 1 See EDID CONFIGURATION on page 8

Mechanical

Housing Metal enclosure

Dimensions (L x W x H mm) 174.5 x 70.5 x 24.6 mm

Weight

Power Supply

1.1 lbs.

5V DC, 1A

Power Consumption

Operation Temperature

Storage Temperature

Relative Humidity

Certifications and

Compliance

6W (max)

32–104°F

-4–140°F

20–90% RH (no condensation)

Product: CE, FCC, RoHS

Power Supply: CE, FCC, RoHS, UL

9

8. CONTACTING TECH SUPPORT

866.838.5052

For SnapAV customers, snapav.com

For Aisle 8 customers, onaisle8.com

9. WARRANTY

2 Year Limited Warranty

This Binary product has a 2-Year limited warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

10

11

Rev: 170726-0930

© 2017 Binary