TeleWell TW-EAV510AC-LTE CAT123G/4G Guide

Add to My manuals
9 Pages

advertisement

TeleWell TW-EAV510AC-LTE CAT123G/4G Guide | Manualzz

TW-EAV510AC(b) GRE Application

There are two modes on GRE application.

▪ Routed(TUN)

▪ Bridged (TAP)

Routed(TUN)

Scenario: Head Office connect to Branch Office by using GRE tunnel.

Head Office: WAN: EWAN(192.168.200.112)

LAN:192.168.31.254

GRE_Tunnel_IP: 10.8.8.1

Branch Office: WAN:ADSL (192.168.200.102)

LAN:192.168.61.254

GRE_Tunnel_IP:10.8.8.111

Network topology:

On Head Office setting:

1.

Make sure your WAN setting is EWAN and IP is 192.168.200.112.

2.

On VPN>GRE Setting. Select Routed(TUN) on GRE Mode.

Set Branch Office WAN IP on GRE Endpoint IP.

Set Tunnel IP to 10.8.8.1.

Set Branch Office LAN subnet on Remote Access Range.

On Branch Office setting:

1.

Make sure your WAN setting is ADSL and IP is 192.168.200.102.

2.

On VPN>GRE Setting. Select Routed(TUN) on GRE Mode.

Set Head Office WAN IP on GRE Endpoint IP.

Set Tunnel IP to 10.8.8.111.

Set Head Office LAN subnet on Remote Access Range.

Result: When tunnel is up, PC_B can ping Head Office Tunnel IP: 10.8.8.1

PC_B can ping Head Office PC_A: 192.168.31.100

PC_B can ping Head Office Router LAN IP: 192.168.31.254

When tunnel is up, PC_A can ping Branch Office Tunnel IP: 10.8.8.111

PC_A can ping Branch Office PC_B: 192.168.61.100

PC_A can ping Branch Office Router LAN IP: 192.168.61.254

Bridged (TAP)

Scenario: Branch Office only allow PC with port 4 can get data from Head Office’s special subnet 192.168.92.x .

Head Office: WAN: EWAN (172.17.21.63)

LAN:192.168.99.254

DHCP server on port 4: 192.168.92.3~100

Branch Office: WAN: EWAN (172.17.21.86)

LAN:192.168.98.254

Network topology:

On Head Office setting:

1.

Set up WAN on WAN>Ethernet WAN.

2.

Make sure your WAN IP is 172.17.21.63.

3.

On VPN>GRE Settings, please select Bridged (TAP) mode and setup Branch Office WAN IP on GRE Endpoint IP.

GRE Option Setting is option but need to have same setting as Branch Office.

4.

On Advance> Bridge Grouping. Please bind with LAN4 and gretp0.

On Branch Office setting:

1.

Set up WAN on WAN>Ethernet WAN.

2.

Make sure your WAN IP is 172.17.21.86.

3.

On VPN>GRE Settings, please select Bridged (TAP) mode and setup Head Office WAN IP on GRE Endpoint IP.

GRE Option Setting is option but need to have same setting as Head Office.

4.

On Advance> Bridge Grouping. Please bind with LAN4 and gretp0.

5.

Try to ping LAN site PC in Head Office to make sure GRE tunnel is up.

6.

Put one PC in port 4 of Branch Office Router. Release and renew IP, the PC in port 4 will get DHCP from DHCP server of

Head Office. IP will be 192.168.92.3 as below:

Result:

Port 4 PC in Branch office are in same subnet as Head Office’s special subnet 192.168.92.x and can get more data from Head

Office now.

advertisement

Related manuals

Download PDF

advertisement