Cafe CSB923M2NS5 Specification

Cafe CSB923M2NS5 Specification
Café™ 30" Five in One Oven
with 240V Advantium® Technology
CSB923M2NS5
FEATURES
Cooking Modes
Style
Control Type
Interior Oven Light
Oven Interior
Microwave Watts (IEC-705)
Turntable Size
Control Features
Cooking Technology
Grill Pan
Rack Type
Precision Cook; Crisp Reheat; Convection;
Microwave; Proof, Warm
Built-In
7" Full Color LCD Touch Control
Yes
Stainless Steel
950
16
Add 30 Sec; Over 175 Programmed Menu
Selections
5 in 1 Oven with 240V Advantium
Yes
Wire Oven Rack
CAPACITY
Total Capacity (cubic feet)
FEATURES & BENEFITS
Unmatched versatility to unleash your imagination - Enjoy a whole new level
of cooking flexibility with a single oven that can be used in five different
ways. Use it as a Convection Oven, Microwave, Toaster Oven, Warming/
Proofing Oven, and Precision Cook Oven with Advantium Technology.
Cook smarter, not longer - Achieve oven-quality results in a fraction of the
time as halogen light, microwave energy and True European Convection
work together to provide the exact amount and type of heat your food
needs, precisely when it needs it
Say goodbye to rubbery leftovers - Achieve crispy results at microwave
speed with more than 20 reheat programs that make leftovers taste
like new
The perfect marriage of quality and speed - Eliminate the need for
preheating and cook your favorite foods four-to eight-times faster than
a conventional oven
Healthy meals without the fuss - Fresh vegetables and rice are perfectly
prepared with a steam cook option that simplifies the entire process
Clean-up has never been easier - Keep your oven looking like new at
all times with steam clean
The perfect fit you’ve always dreamed of - When you’re updating your
kitchen, attention to detail is a priority. That’s why Café Advantium
wall ovens are guaranteed for an exact fit for an easy and seamless
replacement.
APPEARANCE
Color Appearance
Handle
Platinum
Brushed Stainless; Café Minimal Style
1.7
POWER / RATINGS
Electrical Input - 240V Watts
Voltage (MIN)
Voltage (MAX)
Volts/Hertz
Amps 240V/208V
Broiler Wattage
6300
208
240
240V; 60Hz
30
2400W
WEIGHTS & DIMENSIONS
Approximate Shipping Weight
Cavity (W x H x D)
Height (Front)
Net Weight
Overall Height
Overall Width
Overall Depth
Cabinet Width
92
20-1/16 x 8-1/2 x 17
20-1/8
82
20-1/8
29-3/4
21-1/2
30
ACCESSORIES
Metal Oven Pan
Yes - Precision Cooking Tray
Conduit
(48-1/2"
long)
20-1/8"
CL
Café™ 30" Five in One Oven
with 240V Advantium® Technology
2x4’s or
equivalent
solid floor
17-1/2"
Cutout height
Required
cutout location
36-3/4"
minimum
from floor
29-3/4"
CSB923M2NS5
WARRANTY
Suitable
bracing
Limited 1-year entire appliance
totube
support
Limited 5-year magnetron
runners
Limited 1-year entire appliance
See written warranty for full details
Parts warranty
Labor warranty
Warranty notes
cabinet
width
21-5/8"
over centerline
of cabinet
(Must support 130 lbs.)
A= Allow 1" overlap of oven over bottom edge of cutout, and allo
2-3/4" overlap at top edge of cutout.
B= Allow 3/4" - 2-1/8" for overlap of oven over side edges of cut
DIMENSIONS AND INSTALLATION INFORMATION
Oven Dimensions (in inches)and
Cabinet
Installation (in inches)
Installation information: Before installing,
consult
20-1/8"
installation instructions packed with product for
Note: Cabinets installed adjacent
current dimensional data.
21-1/2"
to wall ovens must have an adhesion
Note: Use of the accessory drawer will replace
the bottom trim piece for applicable installations.
Please see installation instructions for full details.
21-1/2"
To Back of Control
CL
Suitable
2x4’s or
bracing
equivalent
solid floor to support
runners
21-1/2"
To Back of Control
Conduit
(48-1/2"
long)
20-1/8"
21-5/8"
29-3/4" over centerline
of cabinet
Required
cutout location
36-3/4"
lbs.) minimum
from floor
CL
2-1/2" MIN. between cutouts
recommended—2" MIN. required
Required
cutout location
36-3/4"
only)
Junction box location (240-volt models
minimum
from floor
29-3/4"
Construct Solid Bottom
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(46" long)
Construct Solid
Bottom MIN.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
cabinet
widthcutouts
2-1/2" MIN. between
recommended—2" MIN. required
B
A= Allow 1" overlap of oven over bottom edge of cutout, and allow
2-3/4" overlap at top edge of cutout.
B= Allow 3/4"Construct
- 2-1/8"Solid
for overlap
Bottom of oven over side edges of cutout.
For answers to your Café™ product questions, visit our website at cafeappliances.com.
Cabinet width
B
Required
cutout location
36-3/4"
minimum 4-3/16"
25-1/4"
Cutout width from floor
4-3/16"
B
Suitable
20-1/8"
bracing
21-1/2"
21-5/8"
to support
over centerline To back
models
only)
Junction
box location (240-volt
runners
of cabinet of Control
29-3/4"
(Must support 130 lbs.)
A
A
1" MIN. aboveBottom
toekick orMIN.
adjust
to oven installation
3/8"height
Plywood
Construct Solid
cabinet
Bottom MIN.
23-1/2"
21-1/2"
Cutout depth
3/8" Plywood
To Back of Control width
Supported by
Junction box
2 x 4 or 1 x 2
location
Runners, all
A=
Allow
1"
overlap
of
oven
over
bottom
edge
of
cutout,
and
allow
(240-volt
A
Four Sides.
models only)
B
2-3/4"
overlap
at
top
edge
of
cutout.
(Must Support
Conduit
B=lbs.)
Allow 3/4"
- 2-1/8" for overlap
of oven over 17-1/2"
side edges of cutout.
150
20-1/8"
(48-1/2"
Cutout height
long)
A
To back
of Control
17-1/2"
2" MIN. between cutouts
Cutout height
spec of at least 194° F temperature rating.
4-3/16"
21-1/2"
B
location
(240-volt
only)
9-1/4" cutout height
models
28-1/2" cutout width
Construct Solid
2-3/4" overlap at top edge of cutout.
B= Allow 3/4" - 2-1/8" for overlap of oven over side edges of cutout.
B
Construct Solid Bottom
23-1/2"
MIN. 3/8" Plywood Supported by
Cutout depth
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support Junction
200 lbs. for box
Wall Oven)
4-3/16"
2x4’s or
Cabinet width
equivalent
A= Allow 1" overlap of oven over bottom edge of cutout, and
allow
solid
floor
A
B
Conduit
(46" long)
17-1/2"
Note: Cabinets installed adjacent
Cutout height
to wall ovens must have an adhesion
cabinet
width
Cabinet width
2-1/2" MIN. between cutouts
recommended—2" MIN. required
solid floor Junction box
29-3/4"
Advantiumlocation
Wall
Oven
Dimensions
(in inches)and
(240-volt
Cabinet Installation
models only)(in inches)
B
Conduit
(48-1/2"
long)
(Must support 130
4-3/16"
25-1/4"
width
A
23-1/2"
2x4’s or
Cutoutequivalent
depth
A
20-1/8"
B
A
25-1/4"
Cutout width
nets installed adjacent
ns must have an adhesion
least 194° F temperature rating.
Junction box location (240-volt models only)
A
Cutout
To back
of Control
29-3/4"
Note: Advantium 240 volt models cannot
be of at least 194° F temperature rating.
spec
installed under 36 inches height.
Wall Oven Dimensions (in inches)and
stallation (in inches)
4-3/16"
Cabinet width
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Note: 2" minimum between cutouts when installed
above warming drawer or single wall
oven.
Advantium
Wall
Constru
Bottom
3/8" Ply
Suppor
2 x 4 or
Runner
Four Si
(Must S
150 lbs
MIN. 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
4-3/16"
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
Café™ 30" Five in One Oven
with 240V Advantium® Technology
CSB923M2NS5
DIMENSIONS AND INSTALLATION INFORMATION
27" or 30"
23-1/2"
Preparation with an Accessory Drawer
Prepare the opening: The Advantium 240V can be installed in combination
with other GE/Monogram appliances. Always follow each product's Installation
Instructions to compete the installation.
25-1/4"
Single oven installation: Order a 30" wide single oven cabinet or cut the
opening in a wall to the dimensions shown.
17-1/2"
*F
or existing cutouts, a maximum width of 28-1/2" is acceptable. If the
opening is slightly wider, secure a furring strip on each side of the
cutout for securing the oven.
- Always maintain 36-3/4" minimum height from the floor to the cutout in
any single or combined installation.
- Allow 3/4" to 2-1/8" case trim overlap on the sides and 1" overlap on the
bottom of the opening for all models. The amount of overlap on the sides
depends on the actual cutout width. Allow 2-1/4" case trim overlap on the top.
Construct base Min. 3/8" plywood
supported by 2x4
or 2x2 runners all
four sides.
36-3/4"
Min.
- Oven overlaps will conceal cut edges on all sides of the opening.
When installed over a single oven or a warming drawer, allow at least
2" between the two openings. This separation will provide clearance for
bottom overlap of the Advantium 240V and the other appliance overlaps.
Construct a solid oven floor of 3/8" min. thick plywood supported by 2 x 4
or 2 x 2 runners on all sides.
Installation over Warming Drawer:
27" or 30"
23-1/2"
- the support must be level and rigidly mounted, flush with the bottom edge
of the cutout.
*F
or existing cutouts, a maximum width of 28-1/2" is acceptable. If the opening
is slightly wider, secure a furring strip on each side of the cutout for securing
the oven.
25-1/4"
Note: Additional clearances between the cutouts may be required. Check to
be sure the oven supports above the Warming Drawer location do not obstruct
the required interior depth and height. See Warming Drawer installation
instructions for details.
Installation Over a Wall Oven and Warming Drawer:
* For
existing cutouts, a maximum width of 28-1/2" is acceptable. If the opening
is slightly wider, secure a furring strip on each side of the cutout for securing
the oven.
Note: Additional clearances between the cutouts may be required. Check
to be sure the oven supports above the Warming Drawer location do not
obstruct the required interior depth and height. See Warming Drawer
installation instructions for details.
Caution: For personal safety, the mounting surface must be capable
of supporting the cabinet load, in addition to the added weight of this
approximate 80-pound oven and 30-pound drawer, plus additional oven
loads of up to 50 pounds or a total weight of 160 pounds.
Construct base Min. 3/8" plywood
supported by 2x4
or 2x2 runners all
four sides.
2" Min.
(3" recommended)
17-1/2"
Per warming
drawer
requirement
36-3/4"
Min.
Installation over a Wall Oven and Warming Drawer:
27" or 30"
23-1/2"
25-1/4"
17-1/2"
Construct solid
bottom - Min. 3/8"
plywood supported
by 2x4 or 2x2
runners all four
sides
2" Min.
(3" recommended)
Per oven
requirement
45-1/4"
Min.
2" Min.
Per warming drawer requirement
For answers to your Café™ product questions, visit our website at cafeappliances.com.
© 2019 GE Appliances
PC92772
06/19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement