TMI Products Camaro Trunk Kit lnstall Installation Instructions
Advertisement
Advertisement
4.
7.
Camaro Trunk Kit Installation
1.
2.
3.
1.
Parts Needed:
1. Permanent Marker
2. Drill
3. Phillips Screwdriver
4. Ratchet Wrench
5. Cap Screws
4.
5.
Step 1. Lay your carpet down, make sure to align with trunk layout.
Step 2.
Fit back trunk panel (Refer to Picture 2)
Step 3.
Proceed to place inner panel (use picture 3-4 for reference)
Step 4.
Line up right and left side trunk panels, stick velcro to hold in place.(Picture 5-6)
Step 5. You may need to cut a slit into trunk arm sleeves to make room for trunk arms to
close (Refer to picture 7)
2.
3.
5.
6.
8.
Last Step: Make sure all panels are fitted correctly and in place, close trunk softly to make sure it locks in place. After Install,
Your trunk should now look like the one in
Photo 8.
99-T8000-000
1.
3.
5.
7.
When Finished with
Step 4, Your trunk should like the one pictured on the right!
Enjoy your new TMI trunk kit!
TRUNK LID INSTALL
2.
Step 1:
Remove your trunk lid and trace hinges so trunk fits exact after install
4.
Step 2:
Use your marker to mark your drill holes and drill.
6.
Step 3:
Align your panel with the drill holes, attach panel w/ Cap
Screws
8.
Step 4:
Use your
Ratchet to attach lid to trunk, tighten bolts.
99-T8000-000

Public link updated
The public link to your chat has been updated.
Advertisement