Vehicle-specific camera
VSC-E-AU13/AU14/BM12/BM14/FO04/ME14/ME15
Delivery content
Connection cable
0,40m
System cable extension 8,10m
Exchange rear door opener handle with integrated camera incl. 1.50m cable
(exemplifying figure)
Product features
Sensor type 1/3“ CMOS PC3089
Picture format NTSC
Resolution 720 x 480 Pixel
Min illumination 0.4 Lux
Angle h=130°, v=90°, d=170°
Mirrored image (fixed)
Parking guide lines, optional switchable
System cable with throughput, e.g. for reverse signal
Protection class IP68
Camera colour black
Total cable length 10m
Video connector RCA male connector
System connector camera 4pin BM
Diameter camera connector 5mm
Operating voltage +12V DC (6 ~ 16V)
Current consumption 40mAh
Power consumption 0.5W
Operating temperature range -20°C to +70°C
Storage temeprature range -40°C to +85°C
Installation
Camera configuration
(Cut green cable loop if required)
With guide lines
Connection cable
• Throughput
• Ground
• +12V Reverse signal
Video signal
Camera not suitable for permanent operation!
Note: If the camera is powered by reverse signal we recommend to install a relay between power supply of reverse signal and power supply of the camera to ensure a stable and uninterrupted power supply and avoid unwanted errors in the board
Tip for dealers:
Inform your end customers that the rear-view camera mustn‘t be cleaned by steam cleaner! Without guide lines
In case the isolation of the camera is harmed in the moisture section close to the camera, it is mandatory to repair the isolation. Otherwise the camera will inevitably become moist inside sooner or later.
10R-04.1484
NavLinkz GmbH - Heidberghof 2 - D-47495 Rheinberg - Germany - www.navlinkz.de - [email protected]