v.LOGiC Intelligent Solution

Interface

V5-MMI3G-PNP

Compatible with Audi MMI3G Basic/High and

MMI3G+ High navigation systems with 4pin HSD

LVDS connector

Version 17.07.2019 V5-MMI3G-PNP

Product features

•

Interactive lane lines

•

Own on-screen display and setup

•

Rear-view camera input

•

Automatic switching to rear-view camera input on engagement of reverse gear from all operation modes

•

Front camera input

•

Manual switching to rear-view camera

•

2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC, camera, reverse gear)

•

Compatible with all factory video accessories (e.g. rear-view camera, TV-tuner)

•

USB update-port for software-updates by consumer

Version 17.07.2019

V5-MMI3G-PNP

Contents

1.

Prior to Installation

1.1.

1.2.

1.3.

1.4.

Delivery contents

Check compatibility of vehicle and accessories

Setting the dip switches of the interface-box V5C-M653

LED’s of the interface-box V5C-M653

2.

Connection schema

3.

Installation

3.1.

3.2.

Connecting interface-box and harnesses

LVDS connection

3.2.1.

After-market front camera

3.2.1.1.

Connection to the after-market front camera

3.2.1.2.

Settings for connecting an after-market front camera

3.2.2.

After-market rear-view camera

3.2.2.1.

Connection to the after-market rear-view camera

3.2.2.2.

Settings for connecting an after-market rear-view camera

3.2.2.3.

Settings for OEM rear-view camera

3.2.3.

Configurable trigger outputs

3.3.

3.4.

Interactive lane lines

Picture settings

4.

Operation

4.1.

OSD – On-screen display

4.1.1.

OSD – Operation

4.1.2.

OSD – Additional setting options

4.2.

Selecting the interface as current video source

5.

Specifications

6.

Connections (interface-box)

7.

Technical support

Version 17.07.2019

V5-MMI3G-PNP

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded.

Version 17.07.2019

V5-MMI3G-PNP

1.

Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources.

1.1.

Delivery contents

Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes.

LVDS cable

CAB-HSD-MG060-OZ

Interface-box

V5C-M653

HW_____ SW_____

V5C-AU03 harness

LVDS cable

CAB-HSD-DD075-O

1.2.

Check compatibility of vehicle and accessories

Requirements

Navigation

Factory OPS

Limitations

Unsupported vehicles

Version 17.07.2019

Audi MMI3G Basic/High, Audi MMI3G+ High

Display of an optical park display (OPS) isn’t possible if an after-market rear-view camera is connected and reverse gear is engaged. Acoustic signals are still existing

Audi – A1, Q3.

V5-MMI3G-PNP

1.3.

Setting the dip switches of the interface-box V5C-M653

Dip 1 on the back of the interface-box V5C-M653 are used to set the monitor type. The default setting is:

Head unit Dip 1 Dip 2 Dip 3

MMI3G High, MMI3G+ High ON OFF OFF

MMI3G Basic – Version 1 OFF OFF OFF

MMI3G Basic – Version 2 OFF ON OFF

After each change of the dip switch settings you have to execute a power reset of the interface-box!

1.4.

LED‘s of the interface-box V5C-M653

V alid%input source

CAN%ok

Power

Version 17.07.2019

V5-MMI3G-PNP

2.

Connection schema

Version 17.07.2019

V5-MMI3G-PNP

3.

Installation

Switch off ignition and disconnect the vehicle’s battery! The interface needs a permanent

12V source. If according to factory rules disconnecting the battery is to be avoided, it is usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead.

If power source is not taken directly from the battery, the connection has to be checked for being start-up proven and permanent.

Prior to wire and device installation we suggest to connect and test correct function of all after-market and factory infotainment equipment!

The interface is installed on the backside of the head unit.

3.1.

Connecting interface-box and harnesses

1

Remove the female Quadlock connector of the vehicle harness from the rear of the navigation computer.

Version 17.07.2019

V5-MMI3G-PNP

Version 17.07.2019

2

3

4

5

Connect the loose blue cable (CAN-low) of harness V5C-AU05 to the orange cable and the loose yellow cable (CAN-high) of harness V5C-AU05 to the orange-green cable on the vehicle climate control panel (note: the vehicle CAN bus wires are twisted).

Alternative CAN bus tap:

Connect the loose blue cable (CAN-low) of harness V5C-AU05 to the orange-brown

Cable and the loose yellow cable (CAN-high) of harness V5C-AU05 to the orange- purple or orange-green cable on the vehicle power distributor (right edge of the dashboard).

Note for alternative CAN bus tap:

The orange cable in the vehicle is always CAN-bus.

The cable colour orange-brown is always CAN-low, the additional cable colour of orange for CAN-high can vary.

Connect female Quadlock connector of vehicle harness to the male Quadlock connector of harness V5C-AU03.

Connect female 12pin AMP connector of the harness V5C-AU03 to the front site of the V5C-M653 interface box.

Connect female Quadlock connector of harness V5C-AU03 to the male Quadlock connector of the navigation computer.

V5-MMI3G-PNP

3.2.

LVDS connection

Version 17.07.2019

1

2

3

4

Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-DD075-O to the male 4pin HSD LVDS connector (LVDS-IN) on the rear of the interface-box V5C-M653.

Remove the grey female 4pin HSD LVDS connector of the vehicle harness at the back of the head unit and connect it to the male 4pin HSD LVDS of the

CAB-HSD-MG060-OZ LVDS cable.

Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-MG060-OZ to the male 4pin HSD LVDS connector (LVDS-OUT) on the rear of the interface-box V5C-M653.

Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-DD075-O to the grey male 4pin HSD LVDS connector on the rear of the head unit.

V5-MMI3G-PNP

3.2.1.

After-market front camera

3.2.1.1.

Connection to the after-market front camera

Interface-box

V5C-M653

FRONT

V5C-AU03 harness

1

Front camera

+12V camera power

2

Power out 1 (max. 1A)

Version 17.07.2019

1

Connect the video RCA of the after-market front camera to the female RCA connector

“FRONT CAM” of the interface box V5C-M653.

2

The pink wire of harness V5C-AU03 can be used for +12V electric power supply (max. 1A) of the after-market front camera. Configure in the OSDmenu “OPTION”, menu item “POWER OUT 1” the designated electric power supply (see chapter

“Configurable switching outputs”).

V5-MMI3G-PNP

3.2.1.2.

Settings for connecting an after-market front camera

You have to configure some settings in the OSD-menus INPUTS and MISC if you want to connect an after-market front camera (Operation of the OSD: see chapter “OSD-Operation”).

OSD-menu Menu item Setting Explication

INPUT

FVC

OFF

ON

No front camera connected

Switches to front camera if parking process is enabled and reverse gear is released

OPTION PARK LOGIC

CRGearSpeed

CRGearTime

ARGearTime

Enabled while parking process and up to

30 km/h

Enabled while parking process and up to

20 second

Enabled with +12V on white wire and up to

20 second

PDC No function

Note:

You can deactivate the enabled parking process by long pressing (3 sec.) the

“control knob” button.

Version 17.07.2019

V5-MMI3G-PNP

3.2.2.

After-market rear-view camera

3.2.2.1.

Connection to the after-market rear-view camera

1

Connect the video RCA of the after-market rear-view camera to the female RCA connector “REAR CAM” of the interface box V5C-M653.

2

The green wire of harness V5C-AU03 can be used for +12V electric power supply (max. 1A) of the after-market rear-view camera. Configure in the

OSD-menu “OPTION”, menu item “POWER OUT 2” the designated electric power supply (see chapter

“Configurable switching outputs”).

-

-

3

Exception: The white wire of harness V5C-AU03 to reverse light signal (+12V of reverse light) if the system doesn’t switch to the rear-view camera automatically after the described OSD-setup (see next chapter).

Version 17.07.2019

V5-MMI3G-PNP

3.2.2.2.

Settings for connecting an after-market rear-view camera

You have to configure some settings in the OSD-menus INPUT and OPTION if you want to connect an after-market rear-view camera (Operation of the OSD: see chapter “OSD-

Operation”).

OSD-menu Menu item Setting Explication

INPUT

RVC

OFF

ON

No rear-view camera connected

Switches to rear-view camera if reverse gear is engaged and/or PDC-display is displayed

OPTION

CRGearOnly

ARGearOnly

Enabled while parking process

Enabled with +12V on white wire

PARK LOGIC

CRGearTime

ARGearTime

Enabled while parking process and up to

20 second

Enabled with +12V on white wire and up to

20 second

OPTION

PDC

RVC GRAPHIC

OFF

LINES

Interactive lane lines deactivated

Interactive lane lines activated

Note:

You can deactivate the enabled parking process by long pressing (3 sec.) the

“control knob” button.

3.2.2.3.

Settings for OEM rear-view camera

OSD-menu Menu item Setting Explication

INPUT

RVC

PARK LOGIC

OEM

RGearSpeed

Keine Funktion

If a factory rear-view camera is existing!

The interface turns off, if reverse gear is enabled and it displays factory rear-view camera

Enabled while parking process and up to

30 km/h

Version 17.07.2019

V5-MMI3G-PNP

3.2.3.

Configurable trigger outputs

Interface-box

V5C-M653

FRONT

V5C-AU03 harness

Power out 1 (max. 1A)

Power out 2 (max. 1A)

1

1

You can configure the both +12V trigger outputs separately. The pink wire is POWER

OUT 1 and the green wire is POWER OUT 2.

Note:

You can configure the both trigger outputs in the OSD-menu OPTION separately

(Operation of the OSD: see chapter “OSD-Operation”).

OSD-menu Menu item Setting Explication

OPTION

POWER OUT1

(pink)

POWER OUT2

(green)

CAN

ACC

CAM

RGEAR

AVS

+12V when the interface is on (red LED on)

+12V when ignition is on

+12V when the rear-view camera input is activated

+12V when reverse gear is engaged

+12V when interface video-source is active

OFF Trigger output deactivated

Version 17.07.2019

V5-MMI3G-PNP

3.3.

Interactive lane lines

You have to configure some settings in the OSD-menu

OPTION if you want to activate interactive lane lines

(Operation of the OSD: see chapter “OSD-Operation”).

OSD-menu Menu item Setting Explication

RVC GRAPHIC

OFF

LINES

Interactive lane lines deactivated

OPTION

Interactive lane lines activated

CAR TYPE

A1/A4/A5/A6/

A7/A8/Q5/Q7

Vehicle type selection

3.4.

Picture settings

You can change the picture settings in the OSD-menu IMAGE (activation only from interface video level possible – push “SETUP” button for 3 sec.).

◦ Brightness

◦ Contrast

◦ Saturation

◦ Hue

◦ Sharpness

Note:

The picture settings will be retained for each AV-source separately.

Version 17.07.2019

V5-MMI3G-PNP

4.

Operation

4.1.

OSD – On-screen display

You can change the basic configurations of the interface in the OSD (on screen display).

4.1.1.

OSD – Operation

You can control the OSD by MMI control buttons.

Long press = enter OSD

Options

OK

Version 17.07.2019

V5-MMI3G-PNP

4.1.2.

OSD – Additional setting options

The following settings in the OSD-menus OPTION and OSD can be configured over and above the described settings in this manual (Operation of the OSD: see chapter “OSD-Operation”):

OSD-menu Menu item Setting Explication

POS. X

POS. Y

0-xxx

0-xxx

Horizontal position of the OSD

Vertical position of the OSD

OSD

SIZE

SMALL

LARGE

OSD TIMEOUT 2-20

Small OSD menu windows

Large OSD menu windows

Time setting for automatic OSD shutoff

INFO

OPTION

VERSION

FACTORY RESET

X.XX.XX Displays the current SW-version

Resetting to factory settings

Version 17.07.2019

V5-MMI3G-PNP

4.2.

Selecting the interface as current video-source

Long press “MEDIA” button

to choose the interface as current video source.

Short press ”MEDIA”

button switch the video sources (cameras). Each short press will switch to the next enabled input. If all inputs are enabled the order is:

FRONT CAM

à

REAR CAM

à

…

Inputs which are not enabled are skipped.

The exiting of the video interface level is achieved by long press of

BACK

button or short press of „

NAV

“, „

CAR

“, „

SETUP

“, „

RADIO

“, „

NAME

“, „

TEL

“ button.

Version 17.07.2019

V5-MMI3G-PNP

5.

Specifications

Operation voltage

Temperature range

Weight (box only)

Stand-by power drain

Operation power drain

Power consumption

10.5 – 14.8V DC

<0,1mA

190mA

2,6W

-20°C to +80°C

285g

Measurements (box only) B x H x T 141 x 30 x 105 mm

6.

Connections (interface-box)

Interface-box

V5C-M653

REAR

Male 4pin HSD

LVDS connector

Male 4pin HSD

LVDS connector

Male 12pin AMP connector

Front camera input

Rear-view camera input

Interface-box

V5C-M653

FRONT

Female update-connector

Mini USB

7.

Technical Support

Caraudio-Systems Vertriebs GmbH

manufacturer/distribution

In den Fuchslöchern 3

D-67240 Bobenheim-Roxheim email [email protected]

Legal disclaimer:

Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners.

Version 17.07.2019

V5-MMI3G-PNP