Sytech SYXTR26BT ALTAVOZ SERIE "POWERWIND", 2X8", 20W. RMS, RECARGABLE, BT, MIC, USB, MD Owner Manual
Sytech SYXTR26BT is a portable speaker with a powerful sound system, featuring two 8-inch woofers delivering 150W PMPO and 20W RMS output power. It supports multiple audio sources, including Bluetooth 5.0 for wireless music streaming, USB and Micro-SD card slots for MP3/WMA/WAV playback, AUX input for wired connection, and FM radio with auto-scan and 32 preset stations. With its built-in rechargeable battery, you can enjoy music for up to 4 hours on the go.
Advertisement
Advertisement
ABL
SPEAKER
XTR26BT
Welcome
Thank you for purchasing the new Wireless Party speaker SY-XTR26BT. Please read this manual carefully before operating your product. And pay close attention to the precautions which are mentioned below. Store this user manual in a safe place for future reference.
Safety Precautions
Points to observe for safe usage
Read this manual carefully before using the product. They contain instructions on how to use this product in a safe and effective manner. SYTECH will not be responsible for problems resulting from failure to observe the instructions in this manual.
Turn off the device immediately in case of a problem.
Failure may cause personal injury or damage to the product.
Return it to your authorized SYTECH dealer for repairing.
Product cleaning.
Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Any other product such as alcohol, benzene, may damage the paint or the plastic.
Temperature
Make sure before using the product, the room temperature is between +35ºC (+95ºF) and -10ºC (+14ºF)
Maintenance.
If you have problems, do not attempt to repair the unit yourself.
Surface
Place the unit on a flat surface.
Leave enough space around the unit for a proper ventilation.
Heat.
Do not place the product near any heat sources or to direct sunlight.
Accessories.
Use only supplied accessories
Remote Control Functions
1. Standby
2. Play / Pause. FM Auto scan
3. Decrease volume
4. Equalizer effects
5. Repeat functions
6. Numerical keys
7. Input selection (AUX-USB-TF-FM-BT)
8. Mute
9. Previous track, Previous FM frequency
10. Next track, Next FM frequency
11. Increase volume
12. USB-Micro-SD function
“ This picture is for reference purposes only”
1. Under normal circumstances, the remote control should be aimed directly at the infrared receiver window of the unit.
The maximum distance for the remote-control operation is approximately 6 meters and within a 30° angle.
2. When operating the remote control, aim the remote control at the infrared receiver window of the unit and ensure that there are no obstacles between the remote control and the unit.
3. If the remote receiver is facing direct sunlight, it may fail. In this case, move the speaker away to avoid the light.
4. Avoid mixing old and new batteries. Replace the remote-control batteries regularly.
Wired microphone usage
Simply connect the microphone jack as shown on the above diagram to the jack input located at the top panel of the speaker.
Functions and connections
2. DC 5V. input
3. Previous track – Previous FM frequency – VOL-
4. LED Display
5. Play/Pause – FM Auto scan – TWS
6. Next track – Next FM frequency – VOL+
7. Mode selector: AUX-USB-Micro SD-FM-BT
LED Light On/Off (Long press to turn on or off)
9. USB – Micro SD slot
10. Power On/Off
11. Charging LED light: (Charging: RED; Full: OFF)
12. Master volume controller
USB & Micro-SD Slot
USB FUNCTION:
•
Make sure your USB flash is formatted as FAT32.
•
Insert the USB flash into the USB port of the speaker system.
•
The unit should detect the USB automatically and play the first track.
•
If in the case the USB does not start automatic playback, press the “MODE” button (7) and select USB mode.
•
If you wish to pause the music, simply press the pause button (5) on the control panel.
•
To select the next track, simply press the “Next” button (6) on the control panel.
•
To select the previous track, simply press the “Previous” button (3) on the control panel.
Note:
1. Make sure the music files are MP3, WMA format or else the music system will not be able to read the files.
2. Make sure the music files are recorded to the root directory.
3. It is advisable to remove unnecessary files for faster reading of the content.
MICRO-SD CARD FUNCTION:
•
Make sure your Micro-SD card is formatted as FAT32.
•
Insert the Micro-SD card into the TF slot of the speaker system
•
The unit should detect the Micro-SD card automatically and play the first track
•
If in the case the Micro-SD card does not start automatic playback, press the “MODE” button (7) and select TF card mode.
•
If you wish to pause the music, simply press the pause button (5) on the control panel.
•
To select the next track, simply press the “Next” button (6) on the control panel.
•
To select the previous track, simply press the “Previous” button (3) on the control panel.
Bluetooth function
•
Select the BLUETOOTH mode using the “MODE” switch on the top panel of the unit or from the remote control itself.
•
Please ensure the Bluetooth device you wish to connect has the Bluetooth function enabled and visible.
•
Start the scan function from your device and search for “SY-XTR26BT”.
•
Once you have found the device, press on it and connect the speaker with the device.
•
When the connection is successful, a “tick” tone will be heard. If the speaker cannot be connected, please restart the speaker or the device and try again.
•
After the connection is successfully established, you can begin to play music. To ensure continuous stability of the music signal, try to keep the Bluetooth device and the mobile phone facing one another.
•
The distance for the Bluetooth signal range is up to 14 meters when no obstacles in between.
FM Radio function
•
Press the “MODE” button (7) on the control panel to switch to FM mode.
•
Press the “Pause/Play” button (5) to start the automatic search of the stations.
•
The unit will start to search all the main stations and will store them automatically.
•
Once the scan search has finalized, press the “NEXT” (6) or “PREVIOUS” (3) buttons to access to the stored channels.
•
The unit will store up to 32 presets.
Note: The FM stations can only be stored automatically. The position of the channel store number will start from the lowest FM frequency to the highest. The pre-set memories cannot be memorized manually.
TWS Function
The TWS function allows you to connect two identical speakers at the same time and lets you enjoy “True
Wireless Stereo” music.
Follow the below steps to enjoy “True Wireless Sound”:
•
Select the Bluetooth mode on the two speakers.
•
Long press the “Play-Pause - TWS” button on one of the units.
•
The LED display will show “t-on” and will automatically connect to the other speaker.
•
A beep sound will be heard confirming the pairing of the two speakers and one of the speaker LED display will show
“Blue”.
•
Connect your mobile device via Bluetooth to the speaker.
•
Play the track from your mobile device and enjoy True Wireless Stereo experience as each speaker will act as left and right.
•
To exit the TWS mode, simply long press the “Play-Pause – TWS” button. The LED display will show “t-off”
Main technical specifications
Basic Specifications
•
2 x 8” Woofer
•
USB/Micro-SD/FM/Bluetooth function
•
1 x Microphone input
•
1 x Aux input
•
LED display
•
Remote control
•
RGB light on woofer grill
•
Output power: 20W RMS.
•
Output power: 150W PMPO
•
TWS Function (True Wireless Stereo)
•
Built in rechargeable battery 1800mA - 3.7V
USB/Micro-SD card Specifications
•
2.0 USB Port (Max Capacity: 32GB)
•
SD Card Slot (Max Capacity: 32GB)
•
Compatible Audio Formats in USB: MP3 / WMA /
•
WAV
Compatible Audio Formats in SD: MP3 / WMA / WAV
Bluetooth Specifications
•
Bluetooth Module: 115952
•
Bluetooth Version: V5.0 + EDR
•
Bluetooth Support: 5.0
•
Bluetooth Profiles: A2DP, AVRCP
•
Bluetooth pairing name: SY-XTR26BT
Technical Specifications
•
Output power: 150W PMPO
•
Output power: 20W RMS
•
SNR: 90dB±3dB
•
Frequency response: 100-18KHz
•
Power supply: DC 5V.-1A / AC110V-240V, 50/60Hz
•
Working time: 2-4 hours (Depends on Volume level)
•
Charging time: 3 hours
•
Above specifications are of “SY-XTR26BT are for reference purpose only.
•
Due to continuous product development, specifications may be subject to change without prior notification.
•
Do not expose to adverse weather conditions (Such as rain or high temperatures) as it can cause malfunctions
Simple troubleshooting
Try the troubleshooting steps below if you are having problems while using your speaker. If problems still exist, please look for a qualified technician or contact Sytech technical department.
To prevent electric shock or damage the speaker, do not repair by yourself.
Symptom
No function light & no sound
Possible problem Solution
1. Plug is not well connected Insert the plug into electrical outlet
Turn on the button
Function light on but no sound
2. Speaker power button is not turned on
1. Cable misconnected Turn off the power, check the input jack to ensure proper audio signal is connected to relevant input jack
Remote control does not work
2.Speaker are not connected or misconnected
3.Audio signal is not transmitted to speaker
Power off, then check and confirm the cable connection again
Check all the speaker if there is audio signal output
1. Before you press any function button, first select the correct source with the remote control instead of the main unit
2. Reduce the distance between the remote control and the unit
3. Insert the battery with its polarities (+/- signs) aligned as indicated
4. Replace the battery
Cannot display some files in the USB device
5. Aim the remote control directly at the sensor on the front of the unit
1. The number of folders or files in the USB device exceeds the max limit. This is not a malfunction of the unit.
2. The formats of these files are not supported
USB device not supported 1. The USB device is incompatible with the unit. Try another one.
Poor radio reception
Bluetooth does not connect with external device
1. Increase the distance between the unit and your TV or VCR
2. Fully extend the FM antenna
1. Verify that the external device is compatible with A2DP
2. Verify that the external device is within the transmission range
3. Verify that the external device has already been paired with the unit.
4. Verify if there is no other external device paired with the unit.
If the problem exists after checking related procedures above, please refer to the appointed a service agent to fix the problem. Do not attempt to open the cover, otherwise the warranty will be void.
Declaration of Conformity
Manufacturer Name: Satyatrade S. L.
Address: Pol.Ind.La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Acoustic Speaker System
Sytech® SY-XTR26BT complies with the following directives:
RED Standard: Directive 2014/53/EU
ROHS Standard: Directive 2011/65/EU Restriction of Hazardous Substances
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator www.sytech.es

Public link updated
The public link to your chat has been updated.
Advertisement