Void Venu Bass Specification Sheet
Void Venu Bass is a single 12-inch compact subwoofer designed for professional audio installations in bars, clubs, hotels, and restaurants. It features a tough 12-inch transducer with a high excursion 4-inch voice coil, delivering powerful and accurate low frequencies. With a frequency response of 40 Hz - 160 Hz, a maximum output of 129 dB peak, and 600 W AES power handling, it ensures clear and impactful bass reproduction.
Advertisement
Advertisement
Venu Bass
Key features:
• Compact and unobtrusive appearance
• 1 x 12” low frequency driver
• Recessed connector panel
• Textured polyurethane finish, optional custom colours
• Perforated steel grille
Applications:
• Bar, club, lounge
• Hotel, restaurant
The Venu Bass is a single 12” compact subwoofer, designed to offer everything you could ask for from an installed sub frequency loudspeaker. The entire Venu series has been created from the demands of many leading installation contractors and engineers around the world.
Convenient to install and use, the Venu Bass features: a tough 12” transducer with a high excursion 4” voice coil;
Phoenix connectors with link outs for quick and reliable hook ups; a recessed rear connector panel that allows the enclosure to be placed against a rear wall; weather-resistant grille and fittings suitable for beach bars and other corrosive environments; and an enclosure made entirely from 15 mm multi-laminate birch plywood.
Specifications
Frequency response
Efficiency 1
Crossover points
Nominal impedance
Power handling 2
Maximum output 3
Driver configuration
Protection
Connectors
Weight
Enclosure
Finish
Grille
40 Hz - 160 Hz ±3 dB
99 dB 1W/1m
80 Hz - 160 Hz active
8 Ω
600 W AES
123 dB cont, 129 dB peak
1 x 12” LF
Internal electronic control
1 x Phoenix with link out
24 kg (52.9 lbs)
15 mm birch plywood
Textured polyurethane
Perforated steel with foam filter
1 Measured in half space 2 AES2 - 1984 compliant 3 Calculated
© 2018 Void Acoustics Research Ltd.
Version 1.0
This information is subject to change without notice.
For the latest online version, visit: www.voidacoustics.com
Venu Bass
Architectural specifications
The loudspeaker system shall be of the active type consisting of one high power 12” (304.8 mm) direct radiating, reflex loaded low frequency (LF) transducer in a rectangular enclosure. The enclosure shall be constructed from a 15 mm multi-laminate birch plywood, finished in textured polyurethane with the external dimensions of (H) 370 mm x (W) 490 mm x
(D) 430 mm (14.6” x 19.3” x 16.9”). The cabinet shall contain fixture points for a pressed steel powder coated grille to be fitted to the front to protect the LF transducer.
unit shall be as follows: 600 W long-term program per voice coil using EIA RS- 426A pink noise (6 dB crest factor). Frequency response, 40 Hz–160 Hz (±3 dB from rated sensitivity). Pressure sensitivity, 96 dB at one Watt 100 Hz–10 kHz at one metre. Rated nominal
Impedance shall be 8 Ω .The loudspeaker shall weigh
24 kg (52.9 lbs) in its entirety.
The low frequency transducer shall be constructed on a cast aluminium frame, with a treated paper cone,
101.6 mm (4”) voice coil, wound with copper wire on a high quality voice coil former, for high power handling and long-term reliability.
Performance specifications or a typical production
The wiring connection shall be via a single removable lockable wiring connector with four terminals (one pair for input and one pair for loop-out to another loudspeaker) with screw-down terminals to provide secure wiring and to allow for pre-wiring of the connector before the installation. This connector should then screw lock to the enclosure to ensure secure attachment.
The loudspeaker system shall be a Void Acoustics
Venu Bass.
490 (19.3”)
490 (19.3”) 430 (16.9”) 490 (19.3”)
490 (19.3”)
Void Acoustics and the Void logo are registered trademarks of Void
Acoustics Research Ltd. in the United Kingdom, USA and other countries; all other Void trademarks are the property of Void Acoustics
Research Ltd., registered in England & Wales No. 07533536.

Public link updated
The public link to your chat has been updated.
Advertisement