Void Venu X Specification Sheet
Void Venu X is a powerful and versatile subwoofer designed for professional audio applications. With its dual 12" low frequency drivers, it delivers deep and impactful bass response, ideal for bars, clubs, lounges, hotels, and restaurants. The compact and unobtrusive design allows for easy placement in a variety of spaces, while the rugged construction ensures durability and reliability. The Venu X features a recessed connector panel for easy hookups and a textured polyurethane finish for added protection. Experience exceptional sound quality and powerful bass with the Void Venu X subwoofer.
Advertisement
Advertisement
Venu X
Key features:
• Compact and unobtrusive appearance
• 2 x 12” low frequency drivers
• Recessed connector panel
• Textured polyurethane finish, optional custom colours
• Perforated steel grille
Applications:
• Bar, club, lounge
• Hotel, restaurant
The Venu X is a double 12” compact subwoofer that has been designed to offer everything you could ask for from an installed sub frequency loudspeaker. The entire Venu series has been created from the demands of many leading installation contractors and engineers around the world.
Convenient to install and use, he Venu X features: two super tough 12” transducers with high excursion 4” voice coils; Phoenix connectors with link outs for quick and reliable hook ups; a recessed rear connector panel that allows the enclosure to be placed against a rear wall; weather-resistant grille and fittings suitable for beach bars and other corrosive environments; and an enclosure made entirely from 15 mm multi-laminate birch plywood.
Specifications
Frequency response
Efficiency 1
Crossover points
Nominal impedance
Power handling 2
Maximum output 3
Driver configuration
Dispersion
Connectors
Weight
Enclosure
Finish
Grille
34 Hz - 160 Hz ±3 dB
99 dB 1W/1m
80 Hz - 160 Hz active
4 Ω
1200 W AES
128 dB cont, 134 dB peak
2 x 12” LF
60°H x 50°V
1 x Phoenix with link out
44.5 kg (98.1 lbs)
15 mm birch plywood
Textured polyurethane
Perforated steel with foam filter
1 Measured in half space 2 AES2 - 1984 compliant 3 Calculated
© 2018 Void Acoustics Research Ltd.
Version 1.0
This information is subject to change without notice.
For the latest online version, visit: www.voidacoustics.com
Venu X
Architectural specifications
The loudspeaker shall be a compact sub bass system consisting of two high power 12” (304.8 mm) direct radiating reflex loaded low frequency (LF) transducers mounted in a rectangular enclosure.
The low frequency transducers shall be constructed on a cast aluminium frame, with a treated paper cone, dual 50.8 mm (2”) voice coil, wound with copper wires on a high-quality voice coil former for high power handling and long-term reliability.
Performance specifications for a typical production unit shall be as follows: the usable bandwidth shall be
34 Hz to 160 Hz (±3 dB) and have a maximum on axis
SPL of 134 dB peak (128 dB continuous) measured at
1 m using IEC265-5 pink noise. Power handling shall be 1200 W AES at a rated impedance of 4 Ω and a pressure sensitivity of 99 dB measured at 1W/1m. The system shall be powered by its own dedicated power amplification module with DSP management, with the wiring connection via a single removable, lockable wiring connector with four screw-down terminals (one pair for input and one pair for loop-out to another loudspeaker) to provide secure wiring and allow for pre-wiring of the connector before the installation. This connector should then screw lock to the enclosure to ensure secure attachment.
The enclosure shall be constructed from a 15 mm multi-laminate birch plywood, finished in a textured polyurethane and shall contain fixture points for a pressed weather-resistant, powder coated steel grille to protect the low frequency transducer. The cabinet shall have a recessed rear connector panel to allow placing it against the wall. External dimensions of (H) 370 mm x (W) 780 mm x (D) 490 mm (14.6” x 30.7” x 19.3”).
Weight shall be 44.5 kg (98.1 lbs).
The loudspeaker system shall be a Void Acoustics Venu X.
780 (30.7”) 490 (19.3”) 780 (30.7”)
780 (30.7”)
Void Acoustics and the Void logo are registered trademarks of Void
Acoustics Research Ltd. in the United Kingdom, USA and other countries; all other Void trademarks are the property of Void Acoustics
Research Ltd., registered in England & Wales No. 07533536.

Public link updated
The public link to your chat has been updated.
Advertisement