Crane EE-8083 Owner Manual

Add to My manuals
14 Pages

advertisement

Crane EE-8083 Owner Manual | Manualzz
 эмм зпаптО\МЕК НЕАТЕК
ВЕТТЕК
LIVING
FOR MODELS:
EE-8083
FE-8083BK
IF YOU HAVE ANY QUESTIONS ABOUT
THE OPERATION OF YOUR smanTOWER
HEATER, PLEASE CONTACT CRANE
CUSTOMER CARE.
TOLL FREE: 888-599-0992
EMAIL: [email protected]
LIVECHAT: WWW.CRANE-USA.COM
PLEASE READ & SAVE ALL INSTRUCTIONS TO ENSURE
THE SAFE AND EFFECTIVE USE OF THIS HEATER.
YOUR DATED PROOF
OF PURCHASE!
[ you will need this in case of warranty |
LIST OF MAIN PARTS P.2
TECHNICAL SPECIFICATIONS P.3
ASSEMBLY INSTRUCTIONS Р. 3
OPERATION & USE P. 4
HEATER SETTINGS P.5
Wi-Fi SET UP P. 6
CUSTOMER CARE FF
MAINTENANCE P.8
WARRANTY Py
CRANE & SUSTAINABILITY
IN,
Crane USA is dedicated to your environment both inside and outside
your home. We know that if cleaned and maintained properly, our
products last for years helping to reduce unnecessary use of resources
and emissions making new products.
Your Crane Heater came packaged in all recycled
cardboard. The manual you’re holding is also from
recycled materials with no added finishes
or harmful dyes.
If the heater should no longer operate, please
be sure to dispose of the unit in an
environmentally friendly way by taking it to a
public collection point.
PLEASE DO NOT PLACE BROKEN HEATERS
WITH YOUR REGULAR HOUSEHOLD WASTE.
=\
Control
Buttons >
Wi-Fi LCD
en DISPLAY
i ICD
Display Temp °
Timer (Hr)
HI Heat
Heat LO Heat
Output —————»
Grate
Intake
=
Vent Child Lock
Wi-Fi
Oscillation
Power
Solid
— =
Base
CONTROL Heat HI/LO Oscillate
Up/Down Timer Power
|
Child Lock —————3»-
MAXIMUM POWER 1500 W
HEAT POWER SETTINGS 1000 W / 1500 W
VOLTAGE 120 VAC / 60 Hz
WARNING: Do NOT use this tower heater if any part has been under
water. Immediately contact Crane Customer Care or a qualified
electrician to inspect or replace the heater if necessary. Keep plastic
wrapping away from children.
ASSEMBLY:
| « Remove tie from power cord and unravel.
2 * Slide the power cord through the base from the top.
3 «e Connect the base to the tower by placing attached peas in the
matching holes and snap into place.
4 « Once base is secure, take the power cord and weave It through the
channel until it exits out the hole on the side of the base. This will allow
the heater to stand flat on the floor.
5 « Place heater on the floor in the desired location.
CAUTION
Do not use your tower heater if it has not been fully assembled. Make sure
the base and the main unit are tightened securely before use.
OPERATING THE HEATER
[ Keep combustible materials such as furniture, pillows, bedding, papers, clothes,
and curtains at least 3 feet from the front, sides & rear of the heater. ]
l + Plug the heater into a 120VAC outlet. This heater has a polarized plug as a
safety feature to fit in an outlet 1 way to reduce the risk of electric shock.
2 » Use the Power Button to start operating your heater. When first powering on,
the LCD Display will read the current room temperature. Wait at
least 10 sec. after powering on before pressing any control buttons. qh
3 » Use the control buttons on top of the heater to enable heater functions.
* Consult the “Heater Functions” section of the instruction manual for
explanation of each function.
TURNING OFF THE HEATER
Use the Power Button to turn off your heater.
Note: The LCD Display will stay illuminated and
count down from 10 before turning off.
OVERHEAT 2. TIP- OVER PROTECTION
This heater has an internal, over-heating safety device which automaticaly
switches off the heater if an over-heat situation is detected. If this should occur,
unplug the appliance and wait until the unit cools off. Once cooled, ensure the
air intake vent on the back is free of dust and lint. Once verified the intake vent
is clear, switch on the heater.
The heater is also equipped with a tip-over safety function that shuts the heater
off if it gets knocked over.
RESET THE HEATER
lf your heater overheats for any reason, please do the following to reset:
l + Make sure heater is off.
2 * Unplug the unit and wait 5-10 minutes.
2 * Ensure there is nothing obstructing the heater €. intake vent.
3 + Plug the heater in and turn it on.
Your smarfTOWER HEATER can be controlled using the contro! buttons
o >
or from your smart phone when connected to wi-fi.
DESIRED ROOM TEMPERATURE
Use the +/- buttons to set the Desired Room Temperature.
Temperature will blink while adjusting, then return to current
room temp. The heater may take up to 6 seconds to respond.
* When room temp. reaches 2° above the desired temp., heater will stop
HEAT POWER BUTTON
Push Button to change from the LO (1000W) or HI (1500W)
Heat Power Setting. The heater may take up to 10 seconds
to respond to the change.
TIMER BUTTON
A number and “H” icon will begin to blink on the LCD screen.
Use the +/- buttons to set the Timer to run the heater from
1 - 12 hours. When using this setting, heater will power off
after number of selected hours.
Wi-Fi BUTTON
Wait until device has powered on for 10 seconds. Push &
hold the Wi-Fi Button on the back of the heater until a long
beep sounds. Wi-Fi Icon will begin to blink at a slower pace.
CHILD LOCK SETTING
Push & hold button for 3 seconds to enable or disable Child
Lock. The lock icon will appear on the LCD screen. When
ON, all other settings are disabled, including power.
OSCILLATION BUTTON
Push button to turn Oscillation Function on or off. The arrow
icon will appear on the LCD screen & the heater will rotate
back and forth 80°
Wi-Fi CONNECTION
DOWNLOAD OUR FREE APP
IPHONES via APP STORE & ANDROID via GOOGLE PLAY
search: Crane Smart Home
OPEN THE CRANE APP ON YOUR HOLD Wi-Fi BUTTON FOR 3 SECONDS.
PHONE, CHOOSE SETTINGS, THEN
LOG IN OR ADD NEW USER ICON ON SCREEN WILL BLINK SLOWLY
2 | OFF
ON
OPEN THE SETTINGS
ON YOUR SMARTPHONE
CLICK TO OPEN
Wi-Fi SETTINGS
Ud Airplane Mode Torf
2 Wi-Fi
Ум
SELECT THE CRANE RETURN TO THE
WI-FI NETWORK CRANE APP
Wi-Fi Network = >
CRANEwifi
CHOOSE DEVICES FROM CHOOSE + ADD NEW DEVICE
THE APP HOMESCREEN THEN CLICK START
ma ADD NEW DEVICE
JS \ y
Wi-Fi Network Password:
С Select Home Wi-Fi Neti brk | eecccccccccccce y Show
Select Time Zone:
(Where the Crane device is located) ( A
| (GMT -6:00) Central Time (US am
N
eo | smartTOWER HEATER (1)
> vals ADD NEW DEVIC
For questions regarding Wi-Fi:
* Crane App: Click CARE, Wi-Fi ITEMS, HEATER for FAQ's & troubleshooting
+ Website: Visit www.crane-usa.com/customer-care/
G 888-599-0992 (Mon -Fri 9:00am - 4:00pm CST)
WA [email protected]
Ce LIVE CHAT (available at www.Crane-USA.com)
Always be sure the heater is switched OFF, unplugged and completely
cooled before cleaning or attempting to store the Нет. DO NOT immerse
heater in water or allow waiter fo drip into the interior of the heater, as this
could create an electric shock hazard.
Please Note: Regardless of the type of heating system setup, always install and
maintain at least one smoke detector in good working condition on each floor of
your home. Periodically check and/or replace the battery in your smoke
detector with a fresh battery.
CARE AND CLEANING
1 - Always turn off the heater and disconnect the cord from the electrical outlet
before cleaning your heater.
2 - Light accumulated dust may be removed from the heater with a soft cloth or
vacuum cleaner.
3 - Ensure the air intake vent on the back of the heater is free and clear of dust
or lint.
4-The removable particle filter should be cleaned and dried out at least 1-2
times per season. Remove the magnetic air intake vent cover and hand wash
the partictle filter with soap and water.
5 - Clean the outside of the heater by wiping with a damp cloth and buff with a
ary cloth.
DO NOT use any detergents or abrasives
DO NOT allow water to run into the interior of the heater as this could create a
fire or electric shock hazard.
STORING
Allow the appliance to cool completely before storing. Store in a dry location.
Do not place heavy items on top of appliance during storage as this may result in
possible damage of the appliance. Store the cord in a clean, dry location away
from metal objects. Always check the plug before use to assure metal items have
not become attached.
For more information regarding the warranty policy,
please visit our website: www.crane-usa.com/customer-service
LIMITED WARRANTY
Thank you for purchasing a Crane product which has been tested to meet our stringent
quality standards. This product is warrantied to be free from manufacturing defects under
normal use and conditions for 1 year,
WARRANTY REQUIRES A DATED PROOF OF PURCHASE.
This warranty ts void if the defect is due to accidental damage, misuse, abuse, neglect,
improper repair or alteration by unauthorized persons, or a failure to follow operating
instructions provided with the product including the use of essential oils. This warranty does
not apply to normal wear and tear or commercial use.
In no event shall liability exceed the purchase price paid by the purchaser of the
product. Under no circumstances shall there be liability for any loss - direct, indirect or
incidental — or consequential damage arising out of, or in connection with the use of this product.
This warranty ts valid only in the 48 contiguous states plus the District of Columbia and excludes
Puerto Rico and the Virgin Islands, This warranty is effective only if the product is purchased and
operated in the United States of America.
Any instructions or warranty included in this manual may be subject to change without notice,
For the most up-to-date instructions and warranty information, please contact us or visit our website.
TO RECEIVE WARRANTY INSTRUCTIONS AND RETURN AUTHORIZATION,
PLEASE CALL, EMAIL, OR LIVECHAT CRANE CUSTOMER CARE.
CRANE USA, INC
1015 Hawthorn Dr, liasca, IL 60143
Toll Free: 1-888-599-0992 (Monday - Friday 9:00am - 4:00em CST)
Email: customer-service @crane-usa.com
Website: www.crane-usa.com
A
GENERAL SAFETY INSTRUCTIONS
WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all of the instructions listed below may result in electric shock, fire and/or serious
personal injury. The warnings, cautions and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by the user that
common sense and caution are a factor which cannot be built into this products, but must be
supplied by the user.
SPECIAL INSTRUCTIONS
+ To avoid a circuit overload when using this product, do not operate another high
wattage product on the same electrical circuit,
. pele the use of an extension cord. The extension cord may overheat and cause risk
of fire,
SAVE ALL INSTRUCTIONS!
CAUTION: A short Power Supply Cord is provided to reduce the risk of personal injury resulting
from becoming entangled in or tripping over a longer cord. Extension cords are available from
local hardware stores and may be used if care is exercised in their use. If an extension cord is
required, special care and caution is necessary. Also, the extension cord must be (1) marked with
an electrical rating of 125V and at least 13A., 1625W., and (2) the cord must be arranged so it will
not drape over the countertop or tabletop where it can be pulled on by children or accidentally
tripped over.
ELECTRIC POWER
lf the electric circuit is overloaded by other appliances, your heater and/or appliances may not
operate properly. The heater should be operated on a separate electrical circuit from other
operating appliances.
POLARIZED PLUG Q
This heater has a polarized plug (one blade is wider than the other). As a safety
feature to reduce the risk of electrical shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
SAFETY WARNING
Although your heater is easy to operate, for your safety, the below warnings must be followed:
Do not place the heater near a heat source.
Never leave the heater unattended while connected to the electrical outlet.
To avoid any accidental burns, never place hand on top vent or side while in operation.
Use the heater on a stable, level surface away from water.
Do not unplug from the wall socket by pulling on the supply cord.
The heater must be unplugged:
A. Before any cleaning
B. After each use
С. fit appears to be faulty
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
FT
/\\ IMPORTANT SAFETY INSTRUCTIONS
Thank you for purchasing a CRANE smartTOWER Heater. Each unit has been
manufactured to ensure safety and reliability. Before using for the first time, please
read the instructions carefully and keep them for further reference.
WARNING! READ AND SAVE THESE INSTRUCTIONS.
Failure to follow all of the instructions listed below may result in electric shock, fire
and/or serious personal injury.
TO AVOID RISK OF ELECTRICAL SHOCK, always make sure the heater is unplugged from
the electrical outlet before relocating, servicing, or cleaning it.
CAUTION: To prevent electric shock, match wide blade of plug to wide outlet slot and
fully insert.
1. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If
provided, use handles when moving this heater. Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater
and keep them away from the sides and rear.
3. Extreme caution is necessary when any heater is used by or near children or invalids and
whenever the heater is left operating and unattended.
4, Always unplug heater when not in use.
5. Do not operate any heater with a damaged cord or plug or after the heater malfunctions,
has been dropped or damaged in any manner, Discard heater, or return to authorized service
facility for examination and/or repair.
6. Donot use outdoors.
у. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations.
Never locate heater where it may fall into a bathtub or other water container.
8. Donotrun cord under carpeting. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Amange cord away from traffic area
and where it will not be tripped over.
9. To disconnect heater, turn controls to off, then remove plug from outlet.
10. Connect to properly grounded outlets only.
11, Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may
cause an electric shock or fire, or damage the heater.
12. То prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on
soft surfaces, like a bed, where openings may become blocked.
13, A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline,
paint, or flammable liquids are used or stored.
14. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons.
15. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord
or relocatable power tap (outlet/power strip).
SAVE THESE INSTRUCTIONS!
Www .Ccrane-USa.com

advertisement

Related manuals

Download PDF

advertisement