Yamaha COMPUTER-RELATED OPERATIONS Owner Manual
Yamaha COMPUTER-RELATED OPERATIONS enables seamless integration between your musical instrument and computer. Transfer MIDI files including songs, record your keyboard performance, and play back computer songs using your instrument's voices. Experience a world of musical possibilities and expand your creativity.
જાહેરાત
જાહેરાત
Computer-related Operations
File Transfer and MIDI communication
Table of Contents
Q
What You Can Do by Connecting to a Computer ..................... page 2
Q
Connecting to a Computer: Which Terminal Should I Use? ... page 3
Playing Back Songs on a Computer via the Instrument Sounds ............................. page 6
Transferring MIDI data from the Computer to the Instrument................................... page 9
Transferring Song/Style data from the Instrument to the Computer........................ page 11
Playing Back MIDI Files including Songs Transferred from a Computer............... page 12
NOTE
• This manual applies to models released on January 2012 or later.
• For information about the target model and available functions of this manual, refer to the end of this manual.
Computer-related Operations
1
What You Can Do by Connecting to a Computer
Many digital musical instruments support the MIDI (Musical Instrument Digital Interface). With this technology, the instrument can communicate with a connected computer, transmitting/receiving the MIDI data, including keyboard performance information and Song playback data.
NOTE
• This manual covers only MIDI communication between the instrument and computer via a USB cable and MIDI cables. Note that audio-related information is not covered.
• For details about MIDI, refer to “MIDI Basics” on Yamaha Manual Library (web site).
Transferring MIDI Files Including Songs …
User Song data you recorded on the instrument can be transferred to a computer and saved as a file, while Song data (MIDI files) obtained via the Internet can be transferred and stored to the instrument, for future listening or keyboard practice. Data transfer can be done using Musicsoft Downloader (free download).
Instrument
Transfer
NOTE
• What you can do in combination with a computer differs depending on the instrument. For details, refer to the end of this manual.
Playing Back Songs on a Computer via the Instrument Sounds …
You can play back MIDI Song files on a computer using the Voice sounds of the instrument with MIDI file playback software.
Instrument
Playback
Recording Your Keyboard Performance to a Computer …
Your keyboard performance can be recorded as MIDI events to music software on a computer. Depending on the application, the recorded data can be edited in various ways, and even converted to notation.
Instrument
Record
Computer-related Operations
2
Connecting to a Computer: Which Terminal Should I Use?
Most MIDI instruments are equipped with MIDI terminals or a USB TO HOST terminal for connecting to a computer. Confirm which terminal your instrument is equipped with.
When equipped with a USB TO HOST terminal: … page 4
In this case, the instrument can be connected to the computer via a USB cable (AB type USB cable of less than 3 meters).
When equipped with MIDI terminals: …
In this case, the instrument can be connected to the computer via MIDI cables and a USB-MIDI interface such as the Yamaha UX16.
If the instrument is equipped with both terminals, we recommend you use the USB TO HOST terminal, since there is need for only one cable and multiple ports can be supported.
Computer-related Operations
3
Connecting a Computer to the Instrument
Connecting to the USB TO HOST terminal
Precautions when using the USB TO HOST terminal
When connecting the computer to the USB TO HOST terminal, make sure to observe the following points. Failing to do so risks freezing the computer and corrupting or losing the data. If the computer or the instrument freezes, restart the application software or the computer OS, or turn the power to the instrument off then on again.
NOTICE
• Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.
• Before connecting the computer to the USB TO HOST terminal, exit from any power-saving mode of the computer (such as suspend, sleep, standby).
• Before turning on the power to the instrument, connect the computer to the USB TO HOST terminal.
• While the computer is connected to the instrument, you should wait for six seconds or more between these operations: (1) when turning the power of the instrument off then on again, or (2) when alternately connecting/disconnecting the USB cable.
Operating System (OS)
Windows XP SP3 or later (32-bit), Windows Vista (32-bit), Windows 7 (32-bit/64-bit), Windows 8 (32-bit/64-bit)
Mac OS X Version 10.5.0 – 10.8.X
NOTICE
• Never use a computer having a different OS from those above. Doing so may cause problems. The Yamaha Standard USB-MIDI driver will support only the above requirements.
1
Turn off the power of the instrument.
2
Start the computer, then quit any running application software.
3
Connect the USB cable to the USB TO HOST terminal of the instrument, then to the USB terminal of the computer.
USB terminal USB TO HOST terminal
Computer
Instrument
USB cable
4
Turn on the power of the instrument.
The computer will automatically be set to enable MIDI communication with the instrument.
Yamaha Standard USB-MIDI driver
When data communication is unstable or some problem occurs with the above operation, download the Yamaha
Standard USB-MIDI driver from the following URL: http://download.yamaha.com/
Follow the Installation Guide in the package file to install the driver to the computer.
Computer-related Operations
4
Connecting a Computer to the Instrument
Connecting to the MIDI terminals
The computer can also be connected to the MIDI terminals, via a USB-MIDI interface, such as the Yamaha UX16.
1
Install the Yamaha USB-MIDI driver supplied with the USB-MIDI Interface to the computer.
For details, refer to the manual of the USB-MIDI interface.
2
Turn off the instrument, then connect the USB-MIDI interface to the USB terminal of the computer and to the MIDI terminals of the instrument.
MIDI [IN][OUT] terminals
USB terminal Computer
Instrument
USB-MIDI interface
(Yamaha UX16, etc.)
3
Turn on the power of the instrument.
Computer-related Operations
5
Playing Back Songs on a Computer via the Instrument Sounds
With the use of MIDI file playback software on your computer, you can play back Songs (MIDI files) via the sounds of the connected instrument. This section covers the basic procedure. For detailed instructions, refer to the manual of your particular MIDI file playback software.
1
Connect the instrument to a computer.
2
Start the MIDI file playback software/application on the computer.
3
Have a Standard MIDI file ready on the computer.
4
From the playback software, select the connected instrument as the MIDI output destination.
5
Start playback of the MIDI file on the playback software.
The MIDI data played back on the computer will be transmitted to the instrument, allowing you to hear the Song being played by the Voice sounds of the instrument.
Playback
Instrument
Recording Your Keyboard Performance to a Computer
By using Music Production software on the computer, you can record your keyboard performance as MIDI data. For detailed instructions, refer to the manual of the application. This section covers the basic settings you need to make on the instrument for recording. Keep in mind that some of the following functions may not be built into the instrument.
Local Control settings
When recording the keyboard performance to the connected computer, the MIDI data you play will be transmitted to the computer then returned back to the instrument. This causes a “double” sound, since the tone generator of the instrument receives the keyboard performance data directly from the keyboard as well as the computer. To avoid this situation, set Local Control to “Off,” in order to separate the tone generator of the instrument from the keyboard.
NOTE
• When you use a software synthesizer as a tone generator, be sure to make settings on the computer application so that the MIDI data received from the instrument will not be returned back to the instrument, in addition to setting Local Control to “Off.”
External Clock
When you record Style/Arpeggio playback, you should set which clock is used, that of the instrument or the computer. If you use the clock of the computer, make settings on the instrument so that Style/Arpeggio playback follows the external clock.
MIDI Transmit settings
Make settings so that Style/Arpeggio playback as well as the keyboard performance will be transmitted to the computer. Note that some instruments cannot transmit playback data.
Transmitting the Panel Settings (Initial Send)
By executing this before recording, you can record the panel settings to the beginning of the Song data. This ensures that the proper and expected sounds will be produced when the recorded Song plays back.
Record
Instrument
Computer-related Operations
6
Transferring MIDI Files Including Songs
With Musicsoft Downloader (available for free downloading), the data of the following types can be transferred between the computer and instrument.
Song files with the extension “.mid”
External Song
This refers to Song data which is created on an external device other than your instrument (such as a computer). This refers also to Song data obtainable over the Internet.
User Song
This refers to Song data which is created via the Recording function of the instrument. User Song data can be transferred to the computer as backup, and then returned to the instrument.
Style file with the extension “.sty”
External Style
This refers to Style data which is created on an external device other than your instrument (such as a computer). This refers also to Style data obtainable over the Internet.
User Style
This refers to Style data which is created via the Recording function of the instrument. User Style data can be transferred to the computer as backup, and then returned to the instrument.
Backup file with the extension “.bup”
This file which includes the panel settings and performance data can be transferred to the computer and saved as backup. The Backup file on the computer can be returned to the instrument again, allowing you to recall the panel settings and performance data you created previously.
Transfer
Instrument
The items included in the Backup file and data which can be transferred differ depending on the instrument. For details, refer to the end of this manual.
NOTICE
• If batteries can be installed to the instrument:
To avoid power down during data transfer and possible data loss, make sure to use the power adaptor rather than batteries when using the
Musicsoft Downloader.
NOTE
• Make sure to stop playback of the Song or Style when using Musicsoft Downloader, since internal memory of the instrument cannot be accessed from the computer during playback.
Computer-related Operations
7
Transferring MIDI Files Including Songs
Installing Musicsoft Downloader
1
On the computer, access the following site, then download Musicsoft Downloader. http://download.yamaha.com/
On this site, input the model name then select “Musicsoft Downloader.”
Information about the computer system requirements and the latest version of this application can be confirmed there.
2
Execute installation by following the on-screen instructions.
After installation is completed, confirm that the Shortcut icon is located on the screen or Musicsoft Downloader is added under Yamaha in the Start menu.
For detailed instructions of this application, refer to the Help.
Computer-related Operations
8
Transferring MIDI Files Including Songs
Transferring MIDI data from the Computer to the Instrument
NOTE
• Depending on the instrument and the computer OS used, menu and screen indications may differ from those shown in the instructions below.
1
Connect the instrument to a computer.
2
On the desktop of the computer, double-click the shortcut icon of Musicsoft Downloader.
If you cannot find the shortcut icon, select [Start]
[All Programs]
[YAMAHA]
[Musicsoft Downloader
5]
[Musicsoft Downloader].
Musicsoft Downloader launches, and the main window appears.
3
Click [Connection Check] at the bottom of the window.
This operation checks whether communication between the computer and instrument has been properly established or not. If an error message appears, follow the on-screen instructions to check the connection status with the Yamaha USB-MIDI driver.
4
On the main window of Musicsoft Downloader, click “Add File” to call up the file selection window.
5
On the file selection window, select the desired file, then click [Open].
Select a file then click here.
In the upper half box of the main window, the duplication of the selected file is shown.
Computer-related Operations
9
Transferring MIDI Files Including Songs
6
At the left center of the main window, click “Electronic Musical Instruments,” then select the desired destination drive.
• If you wish to transfer Song (***.mid) or Style (***.sty) data to internal memory of the instrument, select
“Flash Memory.”
NOTE
• When “USER FILES” folder is located under “Flash Memory,” select “USER FILES” as the destination for the User Songs. Song files outside
“USER FILES” will be handled as External Songs.
• If you wish to transfer Song (***.mid) or Style (***.sty) data to the USB storage device connected to the USB
TO DEVICE terminal of the instrument, select “USB.”
• If you wish to transfer Backup file (****.bup) data, select “System Drive.”
IMPORTANT
• Regarding Backup files, User Songs and User Styles created on the instrument, never change the file name on the computer. Doing so makes it impossible to transfer the Backup file to the instrument, and prevents User Song and User Style data from being recognized by the instrument.
Click “Electronic Musical Instruments,” then select the desired destination drive.
7
Select the file in the upper half box, then click the downward [Move] button.
A confirmation message will appear. To cancel the operation, click [CANCEL] in this step.
8
Click [OK] to start data transfer from the computer to the instrument.
NOTICE
• Never unplug the USB cable during data transfer. Not only will the data transfer fail, but also operation of the memory media may become unstable and its contents may disappear completely when the power is turned on or off.
9
After data transfer is competed, close the window to quit the Musicsoft Downloader.
10
On the instrument, use the data to play music.
If you’ve transferred a Backup file (****.bup), confirm that the panel settings have been changed as expected.
If you’ve transferred a Song (***.mid) or Style (***.sty), select the corresponding number then start playback.
For details, refer to the Owner’s Manual of the instrument, or refer to
in this document.
NOTE
• Note that the instrument cannot be operated while Musicsoft Downloader is running.
Computer-related Operations
10
Transferring MIDI Files Including Songs
Transferring Song/Style data from the Instrument to the Computer
NOTE
• Depending on the instrument and the computer OS used, menu and screen indications may differ from those shown in the instructions below.
1
Connect the instrument to a computer.
2
On the desktop of the computer, double-click the shortcut icon of Musicsoft Downloader.
If you cannot find the shortcut icon, select [Start]
[All Programs]
[YAMAHA]
[Musicsoft Downloader
5]
[Musicsoft Downloader].
Musicsoft Downloader launches, and the main window appears.
3
Click [Connection Check] at the bottom of the window.
This operation checks whether communication between the computer and instrument has been properly established or not. If an error message appears, follow the on-screen instructions to check the connection status with the Yamaha USB-MIDI driver.
4
At the left center of the main window, click “Electronic Musical Instruments,” then select the desired source drive.
• If you wish to transfer Song (***.mid) or Style (***.sty) data in internal memory of the instrument, select
“Flash Memory.”
• If you wish to transfer Song (***.mid) or Style (***.sty) data in the USB flash memory connected to the USB
TO DEVICE terminal of the instrument, select “USB.”
• If you wish to transfer Backup file (****.bup) data, select “System Drive.”
5
In the lower half box of the window, select the desired file, then click the upward [Move] button.
A confirmation message will appear. To cancel the operation, click [CANCEL] in this step.
6
Click [OK] to start data transfer from the instrument to the computer.
7
After a while, confirm that the transferred data appears in the box on the upper half of the window.
8
In the lower left box, select the desired destination folder, then click the downward [Move] button.
A confirmation message will appear. To cancel the operation, click [CANCEL] in this step.
9
Click [OK] to start data transfer from the instrument to the specified destination folder of the computer.
NOTICE
• Never unplug the USB cable during data transfer. Not only will the data transfer fail, but also operation of the memory media may become unstable and its contents may disappear completely when the power is turned on or off.
10
After data transfer is competed, confirm that the file is located in the specified folder of the computer.
11
Quit Musicsoft Downloader.
Computer-related Operations
11
Playing Back MIDI Files including Songs Transferred from a Computer
For instructions concerning models other than the following, refer to the relevant Owner’s Manuals.
YDP-C71/YDP-S51/YDP-162/YDP-142
You can transfer up to 10 Song files from a computer to this instrument for playback. The transferred Songs are assigned to the D # 6–C7 keys, letting you select and play them back.
1
While holding down [DEMO/SONG], press one of the D # 6–C7 keys to select a song to play back.
Song 1 Song 10
D # 6 C7 (highest key)
YDP-C71
The [PLAY], [+ R] and [- L] lamps light, and playback continues the sequence: any other Songs transferred from the computer, followed by Demo Songs and Preset Songs.
YDP-S51
The [PLAY], [+ R] and [- L] lamps light, and playback continues the sequence: any other Songs transferred from the computer.
To change the Song during playback:
Press [+ R] or [- L] to change to the next or previous Song.
2
Press [DEMO/SONG] or [PLAY] to stop playback.
Changing Playback Channels
Try this operation when Song playback produces an unexpected or unnatural sound.
To set Playback Channels to “1+2”:
While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the C7 key.
C7
Highest key
With this operation, the Song data of only channels 1 and 2 will be played back. When Voices incompatible with this instrument are assigned to Channels 3 – 16 and the Piano parts are assigned to the Channels 1 and 2, this operation results in the proper or expected sound.
Computer-related Operations
12
Playing Back MIDI Files including Songs Transferred from a Computer
To set Playback Channels to “All”:
While holding down [DEMO/SONG] and the [PIANO/VOICE] simultaneously, press the B6 key.
B6
Highest key
With this operation, the Song data of all channels will be played back.
Computer-related Operations
13
Target Models and Functions / Zielmodelle und Funktionen /
Modèles cibles et fonctions / Modelos y funciones objetivo /
Modelos de destino e funções / Modelli interessati e funzioni /
Doelmodellen en functies / Modele i funkcje /
Применимые модели и функции / Målmodeller og funktioner /
Målmodeller och funktioner
YDP-C71
YDP-S51
NU1
PSR-E433
PSR-I455
PSR-S950
PSR-S750
P-105
YDP-162/
142
CVP-601/
605/609
User Song /
Anwender-Song /
Morceau utilisateur /
Canción de usuario /
Música do usuário /
Song utente /
Gebruikerssong /
Utwór u ż ytkownika /
Пользовательская композиция /
Brugermelodi /
User Song
User Style /
Anwender-Style /
Style utilisateur /
Estilo de usuario /
Estilo do usuário /
Stile utente /
Gebruikersstijl /
Styl u ż ytkownika /
Пользовательский стиль /
Brugerstilart /
User Style
–
–
–
–
–
–
–
–
–
Backup File /
Sicherungsdatei /
Fichier de sauvegarde /
Archivo de copia de seguridad /
Arquivo de backup /
File di backup /
Back-upbestand /
Plik kopii zapasowej /
Файл резервной копии /
Sikkerhedskopifil /
Säkerhetskopia
(YDP-C71.bup)
–
External Song /
Externer Song /
Morceau externe /
Canción externa /
Música externa /
Song esterna /
Externe song /
Utwory zewn ę trzne /
Внешняя композиция /
Ekstern melodi /
Extern Song
–
(PSR-E433.bup)
(PSR-I455.bup)
(PSR-S950.bup)
(PSR-S750.bup)
–
–
(SMF Formats 0 & 1)
(SMF Formats 0 & 1)
(SMF Formats 0 & 1)
(SMF Formats 0 & 1)
(SMF Formats 0 & 1)
(SMF Formats 0 & 1)
(SMF Formats 0 & 1)
(SMF Formats 0 & 1)
(SMF Formats 0 & 1)
(“Model Name”.bup)
External Style /
Externer Style /
Style externe /
Estilo externo /
Estilo externo /
Stile esterno /
Externe stijl /
Style zewn ę trzne /
Внешний стиль /
Ekstern stilart /
Extern Style
–
–
–
–
–
–
U.R.G., Digital Musical Instruments Division
© 2012 Yamaha Corporation
301POLB-D0
Computer-related Operations
14
ડાઉનલોડ કરો
જાહેર લિંક અપડેટ થઈ
તમારી ચેટની જાહેર લિંક અપડેટ કરવામાં આવી છે. You may view and manage your chat links after registration here.
દસ્તાવેજ જાહેર લિંક
જાહેરાત