Hyundai R180LC-7A Owner Manual
Hyundai R180LC-7A is a new 7A series crawler excavator with an Applied Tier III Engine. It's built for maximum power, performance, and reliability, and is designed to exceed industry standards. The cab is wide and comfortable, with excellent visibility and low noise levels. The operator's comfort is a main concern, with a fully adjustable seat, sliding front and side windows, and a large sunroof. The Robex 180LC-7A is also equipped with an advanced hydraulic system, self-diagnosis system, and new mode control system. With its powerful engine, comfortable cab, and advanced features, the Hyundai R180LC-7A is a great choice for any construction project.
Advertisement
Advertisement
R180LC-7A_new_en 25-10-2007 15:41 Pagina 1
NEW 7A SERIES
CRAWLER EXCAVATOR Applied Tier III Engine
I Photo may include optional equipment
R180LC-7A_new_en 25-10-2007 15:41 Pagina 2
Robex 180 LC-7A
Built for Maximum Power,
Performance and Reliability.
A new chapter in construction equipment has now begun.
Making the dream a reality.
R180LC-7A_new_en 25-10-2007 15:41 Pagina 3
I Photo may include optional equipment
HYUNDAI CONSTRUCTION EQUIPMENT 02 /
03
R180LC-7A_new_en 25-10-2007 15:41 Pagina 4
Robex 180 LC-7A
Operator’s Comfort is Our Main Concern.
Wide Cab Exceeds Industry Standards.
Technology in Cab Design
Visibility
. Even more visibility than before, for safer, more efficient operation.
Excellent Ventilation
. Ventilation has been improved by the addition of a larger fresh air intake system and by providing additional air flow throughout the cab.
. Sliding front and side windows provide improved ventilation.
. A large sunroof offers upward visibility and additional ventilation.
Comfortable Operator Environment
. The control levers and seat can be adjusted to provide maximum operator comfort.
. The seat is fully adjustable for optimum operating position, reducing operator fatigue.
. Console boxes slide forward and backward for improved accessibility.
. The proportional pressure controls reduce unnecessary exertion while ensuring precise operation.
. Large windows allow excellent visibility in all directions.
Low noise design
. The Robex 7A series is designed with low operation noise in mind.
. Hyundai engineering made efforts to keep interior and exterior noise levels to a minimum.
. The cab's noise levels have been additionally reduced by improving the door seals for the cab and engine compartments.
. An insulated diesel engine compartment with sound-damping material also reduces noise.
1
2 3
1 Wide, Comfortable Operating Space
2 Steel Cover Sunroof
3 Dial Type Engine Speed Switch and / Key Switch
Radio CD Control
R180LC-7A_new_en 25-10-2007 15:41 Pagina 5
HYUNDAI CONSTRUCTION EQUIPMENT 04 /
05
R180LC-7A_new_en 25-10-2007 15:41 Pagina 6
Robex 180 LC-7A
Improved Intelligent Display
Instrument Panel is installed in front of RH console box. It is easy to check all critical systems with easy-to-read indicators.
Minimization of Shock and Vibration through a Cab Mounting System
The application of the Viscous Mounting system to the cabin support provides the operator with a smoother ride. The operator work efficiency will increase as the shock and noise level in the cabin decreases.
Operating Environment
Storage box and Cup Holder
An additional storage box and cup holder are located behind operator’s seat so to keep food and beverages cool or hot.
Wide Cab with Excellent Visibility
The cab is roomy and ergonomically designed with low noise level and a good visibility. A full view front window and large rear and side windows provide excellent visibility in all directions.
Wide, Comfortable Operating Space
All the controls are designed and positioned according to the latest ergonomic research.
Reinforced pillars have also been added for greater cab rigidity.
Smooth Travel Pedal and Foot Rests
R180LC-7A_new_en 25-10-2007 15:41 Pagina 7
Maximum Protection
Highly Sensitive Joystick and Easy Entrance
New joystick grips for precise control have been equipped with
4 switches.
Left
• Power boost
• One touch deceleration
• Optional (2)
Right
• Horn
• Optional (3)
Easy-to-Reach Control
Panels
Switches and other essential controls are located near the operator. This helps to keep operator movements to a minimum, enhancing control with less operator’s fatigue.
Rear Emergency Exit
Window
Rear Exit Window is designed to provide an easy exit in emergency cases.
Raise-up Wiper and Cabin
Lights
Raise-up wiper installed to enhance a better front view.
Cabin Lights enhance safety by brightly lighting the surroundings in dark environments. (optional)
The better working conditions in a pleasant environment
�
쐅
쐈
쐉
씈
씉
�
�
�
�
�
�
�
�
Centralized control panel
Horn button
Option button
Remote Radio control
Travel lever
Cluster
One touch decel button
Hour meter
Travel pedal
Fully adjustable suspension seat
Safety lever
Power boost button
Joystick control lever
Air Conditioner and Heater controller
HYUNDAI CONSTRUCTION EQUIPMENT 06 /
07
R180LC-7A_new_en 25-10-2007 15:41 Pagina 8
Automatic Engine
Overheat Prevention
If the engine coolant temperature gets too high, the CPU controller lowers the engine speed and cools the engine.
Anti Restart System
The new system protects the starter from re-starting during engine operation, even if the operator accidentally turns the start key again.
Power boost control
System
When the power boost system is activated, digging power increases about 10%.
It is especially useful when extra power is temporarily needed, for instance, when digging hard earth and rock.
Automatic Warming-up
System
After the engine is started, if the engine coolant temperature is low, the CPU controller increases the engine speed and automatically increases the pump flow rate so to warm up the engine more effectively.
Advanced Hydraulic System
ADVANCED CAPO SYSTEM
NEW MODE CONTROL SYSTEM
2
3
1
1
2
POWER MODE
H mode: High power
S mode: Standard power
WORK MODE
: Heavy duty work
: General work
: Breaker
3
USER MODE
M mode: Maximum Power
U mode: Memorizing Operator’s Preferable Power Setting
The advanced CAPO (Computer
Aided Power Optimization) system maintains engine and mutual pump power at optimum levels. Mode selections are designed for various work loads, maintaining high performance while reducing fuel consumption. Features such as auto deceleration and power boost are included in the system. The system monitors engine speed, coolant temperature, and hydraulic oil temperature. Contained within the system are self diagnostic capabilities which are displayed by error codes on the cluster.
Auto Deceleration System
When remote-control valves are in neutral position more than
4 seconds, the CPU controller instructs the accelerator actuator to reduce engine speed to
1,000 rpm. This decreases fuel consumption and reduces cab noise levels.
Max. Flow Cut-off System
For precise control and finishing work, the Max.
Flow Cut-off System reduces pump flow, thus allowing smooth operation.
Self Diagnosis System
The CPU controller diagnoses problems in the
CAPO system caused by electric and hydraulic malfunctions and displays them on the LCD monitor of the cluster through error codes. This controller has the capacity to identify 48 distinct types of errors. The information from this device, such as engine rpm, main pump delivery pressure, battery voltage, hyd. temperature, and the state of all types of electric switches, provides the operator with an exact condition of the machine. This instrument makes it easier to troubleshoot the machine in case of failure.
One Touch Deceleration System
When the one touch deceleration switch is pressed, the CPU controller controls the accelerator actuator to reduce engine speed to
850 rpm. Once this switch is pressed again, the engine speed recovers to its preset RPM.
Pump Flow Control System
In neutral position: Pump flow is reduced to a minimum to eliminate power loss.
In operation: Maximum pump flow is delivered to the actuator to increase the speed. With movement of the control lever, pump flow is automatically adjusted and the actuator speed can be proportionally controlled.
Boom & Arm Holding System
The holding valves in the main control valve prevent the boom & arm from dropping over an extended period in neutral position.
Arm Flow Regeneration System
Arm flow regeneration valve provides smooth arm-in operation without cylinder cavitation.
Hydraulic Damper in Travel Pedal
Improved travel controllability & feeling during movement of the machine by use of shock reducing material.
R180LC-7A_new_en 25-10-2007 15:41 Pagina 9
Mitsubishi D04FD-TAA
Engine
The 4 cylinders turbocharged and charged air cooled, engine is built for power, reliability and economy. This engine meets EPA tier 3 and
EUstage 3A emission regulation.
Reliability You Can Depend On
When you have a tough job to do you need the power, precision and flexibility of Mitsubishi
D04FD-TAA engines. It features major enhancements to make every piece of equipment work harder, smarter, quieter and longer.
The high Pressure Common Rail Fuel System provides enhanced engine performance with higher torque and better throttle response at every rpm without compromising fuel economy.
The Mitsubishi D04FD-TAA engine is based on the highly successful Mitsubishi SK series engines.
These engines combine proven full authority electronic controls with reliable performance you expect from one of the most successful and durable engine design.
Increased Higher Performance
Reinforced Bucket and Bucket Linkage
To prevent excessive wear of pins and bushes, sealed joints have been applied. Bucket link design incorporates high durability and anti wear characteristics. Additional reinforcement plates on cutting edge section are welded. Thicker steel and an additional lateral plate are put in place to reinforce the bucket.
Strong and Stable Lower Frame
Reinforced box-section frame is all welded using low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground or working on wet sites. The use of highly durable upper and lower rollers and track guards ensures proper machine transfer on all terrains. The long undercarriage incorporates heavy duty excavator style components. An X-leg type center frame is integrally welded for maximum strength and durability.
Powerful and Precise Swing Control
Improved shock absorbing characteristics make stopping swing movement a precise and smooth action.
Track Rail Guide & Adjusters
Durable track rail guides keep track links in place. Track adjustment is made easy by using standard grease operated cylinder track adjusters including shock absorbing springs. (Full Track Guide: Option)
HYUNDAI CONSTRUCTION EQUIPMENT 08 /
09
R180LC-7A_new_en 25-10-2007 15:41 Pagina 10
Robex 180 LC-7A
Full open doors and the use of one master key system provide easy access during servicing.
Reliability & Serviceability
Side Cover with Left & Right Swing Open Type
Easy access to vital components gives unrestricted view of components allowing easy maintenance and repair.
Easy to maintain engine components
A cooling and preheating system are provided for optimum and immediate operation, guaranteeing longer life for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility.
Centralized Electric Control
Box and Easy Change Air
Cleaner Assembly
Electric control box and air cleaner are centralized in one and the same compartment for easy service.
Highly efficient Hydraulic Pump
Pump output capacity has been increased.
Large tool box for extra storage
R180LC-7A_new_en 25-10-2007 15:41 Pagina 11
Durability of structure proven through FEM
(Finite Element Method) analysis and long term durability test.
HYUNDAI CONSTRUCTION EQUIPMENT 10 /
11
R180LC-7A_new_en 25-10-2007 16:13 Pagina 12
S
pecifications
Engine
Model
Type
Rated flywheel horse power
SAE
J1995 (gross)
J1349 (net)
6271/1 (gross)
DIN
6271/1 (net)
Max. torque
Bore x stroke
Piston
Batteries
Starting motor
Alternator
Mitsubishi D04FD-TAA
Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged, charged air cooled and low emission
94 kW (126 HP) at 2,000 rpm
87 kW (116 HP) at 2,000 rpm
94 kW (128 PS) at 2,000 rpm
87 kW (118 PS) at 2,000 rpm
477 Nm (345 lbf.ft)at 1,800 rpm
102 x 130 mm (4.5” x 5.3”)
4,249 cc (259.3 in 3 )
2 x 12 V x 100 AH
24 V - 5.0 kW
24 V - 50 Amp
Hydraulic system
Main pump
Type Two variable displacement piston pumps
Max. flow 2x160 l /min (44.4 US gpm / 37.0 UK gpm)
Sub-pump for pilot circuit Gear pump
Cross-sensing and fuel saving pump system
Hydraulic motors
Travel
Two speed axial piston motor with brake valve and parking brake
Swing
Relief valve setting
Implement circuits
Travel
Power boost (boom, arm, bucket)
Swing circuit
Pilot circuit
Service valve
Hydraulic cylinders
No. of cylinder - bore x rod x stroke
Axial piston motor with automatic brake
32,4 MPa (4,690 psi)
32,4 MPa (4,690 psi)
35,3 MPa (5,120 psi)
23,5 MPa (3,410 psi)
3,4 MPa (500 psi)
Installed
Boom:
Arm:
2-115 x 80 x 1090 mm (4.5” x 3.1” x 42.9”)
1-120 x 85 x 1340 mm (4.7” x 3.3” x 52.8”)
Bucket: 1-115 x 80 x 950 mm (4.5” x 3.1” x 37.4”)
Blade: 2-110 x 75 x 320 mm (4.3” x 3.0” x 12.6”)
2PCS 1st: 2-115 x 80 x 960 mm (4.5” x 3.1” x 37.8”)
2nd: 1-160 x 95 x 650 mm (6.3” x 3.7” x 25.6”)
Drives & Brakes
Drive method
Drive motor
Reduction system
Max. drawbar pull
Max. travel speed(high) / (low)
Gradeability
Parking brake
Fully hydrostatic type
Axial piston motor, in-shoe design
RV gear
170 kN (37,500 lbf)
5.2 km/hr (3.2 mph) / 3.3 km/hr (2.1 mph)
30° (58%)
Wet multi-disc
Control
Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation.
Pilot control
Two joysticks with one safety lever
(LH): Swing and arm,
(RH): Boom and bucket (ISO)
Traveling and steering
Engine throttle
External Lights
Two levers with pedals
Electric, Dial type
Two lights mounted on the boom one under the battery box
Swing System
Swing motor
Swing reduction
Swing circuit lubrication
Swing brake
Swing speed
Axial piston motor
Planetary gear reduction
Grease-bathed
Multi wet disc
11.3 rpm
Coolant & Lubricant Capacity
(refilling)
Fuel tank
Engine coolant
Engine oil
Swing device
Final drive (each)
Hydraulic system
Hydraulic tank liter
260.0
28
17.5
5
5.4
240
160
US gal
68.7
7.4
4.6
1.3
1.4
63.4
42.3
UK gal
57.2
6.2
3.8
1.1
1.2
52.8
35.2
Undercarriage
X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing spring sprockets and track chain with triple grouser shoes.
Centre frame
Track frame
No. of shoes on each side
No. of carrier roller on each side
No. of track roller on each side
No. of rail guides on each side
X - leg type
Pentagonal box type
51
2
8
2
Operating Weight (approximate)
Operating weight, including 5.1m (16’ 9”) mono boom,2.6m (8’ 6”) arm,
SAE heaped 0.76 m 3 (0.99 yd 3 ) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment.
Major component weight
Upperstructure
Counterweight
5.1 m (16’ 9”) Mono boom (with arm cylinder)
Hydraulic adjustable boom (with arm cylinder)
4,530 kg (9,900 lb)
2,950 kg (6,500 lb)
1,250 kg (2,760 lb)
1,780 kg (3,920 lb)
Operating weight
Shoes (Triple grouser) mm (in)
500 (20”)
600 (24”)
700 (28”)
800 (32”)
180LC-7A
180NLC-7A
180LCD-7A
180LC-7A
180NLC-7A
180LCD-7A
180LC-7A
180NLC-7A
180LCD-7A
180LC-7A
180LCD-7A
S tandard equipment
Operating weight kg (lb)
17,950 (39,580)
17,860 (39,370)
19,010 (41,910)
18,200 (40,120)
18,110 (39,930)
19,260 (42,460)
18,450 (40,680)
18,360 (40,480)
19,510 (43,010)
18,700 (41,230)
19,770 (43,580)
Ground pressure
MPa (psi)
0.048 (6.97)
0.048 (6.97)
0.051 (7.39)
0.041 (5.97)
0.041 (5.97)
0.043 (6.26)
0.035 (5.12)
0.035 (5.12)
0.037 (5.40)
0.031 (4.55)
0.033 (4.83)
R180LC-7A_new_en 25-10-2007 15:41 Pagina 13
B
ackhoe attachment
Buckets
0.39 (0.51)
SAE heaped m 3 (yd 3 )
0.50 (0.65) 0.64 (0.84) 0.76 (0.99) 0.89 (1.16) 1.05 (1.37) 0.69 (0.90)
Capacity m 3 (yd 3 )
SAE heaped
0.39 (0.51)
0.50 (0.65)
0.64 (0.84)
0.76 (0.99)
0.89 (1.16)
1.05 (1.37)
0.69 (0.90)
CECE heaped
0.34 (0.44)
0.44 (0.58)
0.55 (0.72)
0.65 (0.85)
0.77 (1.01)
0.90 (1.18)
0.62 (0.81)
: Standard backhoe bucket
: Heavy-duty
Width mm (in)
Without side cutters
620 (24.4)
760 (29.9)
920 (36.2)
1,060 (41.7)
1,220 (48.0)
1,400 (55.1)
990 (39.0)
With side cutters
740 (29.1)
880 (34.6)
1,040 (40.9)
1,180 (46.5)
1,340 (52.8)
1,520 (59.8)
-
Weight kg (lb)
410 (900)
470 (1,040)
510 (1,120)
570 (1,260)
610 (1,340)
680 (1,500)
700 (1,540)
Boom
Arm
2.2
(7 ’ 3 ” )
5.1 (16 ’ 9 ” )
Mono boom
-
2.6
Recommendation mm (ft.in)
(8’ 6”)
3.1
(10 ’ 2 ” )
-
-
5.1 (16’ 9” )
Hydraulic Adjustable boom
2.2
(7 ’ 3 ” )
2.6
(8 ’ 6 ” )
-
-
: Applicable for materials with density of 2,000 kg/m 3
: Applicable for materials with density of 1,600 kg/m 3
(3,370 lb/yd 3 ) or less
(2,700 lb/yd 3 ) or less
: Applicable for materials with density of 1,100 kg/m 3 (1,850 lb/yd 3 ) or less
Backhoe attachment
Boom and arms are of all-welded, low-stress, full-box section design. 5.1 m (16'9") mono boom; 5.1 m (16'9") hydraulic adjustable boom and 2.20 m ( 7'3"); 2.60 m (8'6");
3.10 m (10'2") arms are available. Buckets are all-welded, high-strength steel implements.
2.20 m (7’ 3”)
Digging force
Arm
Bucket digging force
Arm crowd force
Length
Weight
I
I
S
S
AE
S O
AE
S O m (ft.in) kg (lb) kN kgf lbf kN kgf lbf kN kgf lbf kN kgf lbf
Note: Arm weight including bucket cylinder and linkage.
2.20 (7 ’ 3 ” )
750 (1560)
108.6 [118.4]
11,070 [12,080 ]
24,410 [26,630 ]
124.5 [135.9]
12,700 [13,850 ]
28,000 [30,550 ]
85.2 [93.0]
8,690 [9,480]
19,160 [20,900 ]
89.0 [97.1]
9,080 [9,910]
20,020 [21,840 ]
2.60 m (8’ 6”)
2.60 (8
’
6
”
)
810 (1790)
108.6 [118.4 ]
11,070 [12,080 ]
24,410 [26,6 3 0 ]
124.5 [1 3 5.9 ]
12,700 [1 3 ,850 ]
28,000 [ 3 0,550 ]
75.0 [81.8 ]
7,650 [8, 3 50 ]
16,870 [18,400 ]
77.6 [84.6 ]
7,910 [8,6 3 0 ]
17,440 [19,0 3 0 ]
Standard arm
3.10 m (10’ 2”)
3.10 (10 ’ 2 ” )
890 (1960)
108.6 [118.4]
11,070 [12,080 ]
24,410 [26,630 ]
124.5 [135.9]
12,700 [13,850 ]
28,000 [30,550 ]
67.4 [73.5]
6,870 [7,490]
15,150 [16,530 ]
69.4 [75.7]
7,080 [7,720]
15,610 [17,030 ]
Remark
[ ]:
Power Boost
HYUNDAI CONSTRUCTION EQUIPMENT 12 /
13
R180LC-7A_new_en 25-10-2007 15:41 Pagina 14
D
imensions & Working ranges
Dimensions R1 8 0LC-7A / R1 8 0NLC-7A Mono boom
D,D' E
K
180
LC -7A
I
A
B
K
H
L
5
0
15
10
5
10
15
20 feet
30
25
20
A
E
F
G
B
C
D
D ’
H
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
R180L C -7A
R180NL C -7A
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
R180L C -7A
R180NL C -7A mm (ft
.
in)
3360 (11’ 0”)
3360 (11’ 0”)
4190 (13’ 9”)
1050 (3’ 5”)
2530 (8’ 4”)
2480 (8’ 2”)
2475 (8’ 1”)
2915 (9’ 7”)
460 (1’ 6”)
2250 (7’ 5”)
1990 (6’ 6”)
Boom length
Arm length
I
J
Overall length
Overall height of boom
K Track shoe width
L
Overall width
R180L C -7A
R180NL C -7A
500
(20
”
)
2750
( 9
’
1
”
)
2450
(8 ’ 04 ” )
Standard Equipment
2200
(7
’
3
”
)
8 6 20
(28
’
3
”
)
2 96 0
( 9
’
9
”
) mm (ft
.
in)
600
(24 ” )
2850
(9 ’ 5 ” )
2550
(8 ’ 4 ” )
5100 (16 ’ 9 ” )
2600
(8 ’ 6)
8600
(28 ’ 3 ” )
2910
(9 ’ 7 ” )
700
(28
”
)
2 9 50
( 9
’
9
”
)
-
3100
(10
’
2
”
)
8 6 00
(28
’
3
”
)
30 9 0
(10
’
2
”
)
800
(32
”
)
3050
(10
’
1
”
)
-
Working ranges R1 8 0LC-7A / R1 8 0NLC-7A Mono boom
A
A' meter
9
8
7
6
3
2
5
4
F
1
2
3
4
1
0
5
6
9 8 7 6 5 4 3 2 1 0 meter
30 25 20 15 10 5 0 feet
180 LC-7A
Boom length
Arm length
A
A ’
B
B ’
C
D
E
Max. digging reach
Max. digging reach on ground
Max. digging depth
Max. digging depth (8' level)
Max. vertical wall digging depth
Max. digging height
Max. dumping height
F Min. swing radius
Standard Equipment
2200
( 6
’
3
”
)
8 69 0
(28 ’ 6 ” )
8530
(27
’
12
”
)
5 66 0
(18
’
7
”
)
5440
(17
’
10
”
)
5140
(1 6
’
10
”
)
8740
(28
’
8
”
)
6 100
(20
’
0
”
)
3180
(10 ’ 5 ” ) mm (ft
5440
(17 ’ 10 ” )
8870
(29 ’ 1 ” )
6240
(20 ’ 6 ” )
3170
(10 ’ 5 ” )
5100 (16 ’ 9 ” )
2600
(8 ’ 6 ” )
9030
(29 ’ 8 ” )
8870
(29 ’ 1 ” )
6060
(19 ’ 11 ” )
5860
(19 ’ 3 ” )
3100
(10
’
2
”
)
9 450
(31 ’ 0 ” )
9 300
(30
’
6
”
)
6 5 6 0
(21
’
6
”
)
6 370
(20
’
11
”
)
5730
(18
’
10
”
)
8 9 70
(2 9
’
5
”
)
6 380
(20
’
11
”
)
3180
(10 ’ 5 ” )
.
in)
R180LC-7A_new_en 25-10-2007 15:41 Pagina 15
Dimensions R1 8 0LCD-7A
K
180
LCD -7A
A
B
G
H
E
F
C
D
D ’
M
N
O
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
Ground clearance of blade up
Depth of blade down
Height of blade
Width of blade
Working ranges R1 8 0LCD-7A
I I
3360 (11’ 0”) mm (ft
.
in)
4190 (13’ 9”)
1050 (3’ 5”)
2530 (8’ 4”)
2480 (8’ 2”)
2475 (8’ 1”)
2915 (9’ 7”)
460 (1’ 6”)
2250 (7’ 5”)
780 (2’ 7”)
520 (1’ 8”)
645 (2’ 1”)
2850 (9’ 4”)
Boom length
Arm length
I
J
Overall length
Overall height of boom
K Track shoe width
L Overall width
500
(20
”
)
2750
( 9
’
1
”
)
Standard Equipment
2200
(7
’
3
”
)
9 010
(2 9
’
7
”
)
2 96 0
( 9
’
9
”
) mm (ft
.
in)
600
(24 ” )
2850
(9 ’ 5 ” )
5100 (16 ’ 9 ” )
2600
(8 ’ 6)
8990
(29 ’ 6 ” )
2910
(9 ’ 7 ” )
700
(28
”
)
2 9 50
( 9
’
9
”
)
3100
(10
’
2
”
)
8 99 0
(2 9
’
6
”
)
30 9 0
(10
’
2
”
)
800
(32
”
)
3050
(10
’
1
”
)
9 8 7 6 5 4 3 2 1 0
-
7
Boom length
Arm length
A
A ’
B
B ’
C
D
E
Max. digging reach
Max. digging reach on ground
Max. digging depth
Max. digging depth (8' level)
Max. vertical wall digging depth
Max. digging height
Max. dumping height
F Min. swing radius
Standard Equipment
2200
( 6
’
3
”
)
8 69 0
(28 ’ 6 ” )
8530
(27
’
12
”
)
5 66 0
(18
’
7
”
)
5440
(17
’
10
”
)
5140
(1 6
’
10
”
)
8740
(28
’
8
”
)
6 100
(20
’
0
”
)
3180
(10 ’ 5 ” ) mm (ft
.
in)
5440
(17 ’ 10 ” )
8870
(29 ’ 1 ” )
6240
(20 ’ 6 ” )
3170
(10 ’ 5 ” )
5100 (16 ’ 9 ” )
2600
(8 ’ 6 ” )
9030
(29 ’ 8 ” )
8870
(29 ’ 1 ” )
6060
(19 ’ 11 ” )
5860
(19 ’ 3 ” )
3100
(10
’
2
”
)
9 450
(31 ’ 0 ” )
9 300
(30
’
6
”
)
6 5 6 0
(21
’
6
”
)
6 370
(20
’
11
”
)
5730
(18
’
10
”
)
8 9 70
(2 9
’
5
”
)
6 380
(20
’
11
”
)
3180
(10 ’ 5 ” )
HYUNDAI CONSTRUCTION EQUIPMENT 14 /
15
R180LC-7A_new_en 25-10-2007 15:41 Pagina 16
D
imensions & Working ranges
Dimensions R1 8 0LC-7A / R1 8 0NLC-7A Hydraulic adjustable boom
D,D' E
180
LC-7A
I
A
B
A
E
F
G
B
C
D
D ’
H
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
R180L C -7A
R180NL C -7A mm (ft in)
3360 (11’ 0”)
4190 (13’ 9”)
1050 (3’ 5”)
2530 (8’ 4”)
2480 (8’ 2”)
2475 (8’ 1”)
2915 (9’ 7”)
460 (1’ 6”)
2250 (7’ 5”)
1990 (6’ 6”)
K
Boom length
Arm length
I
J
Overall length
Overall height of boom
K Track shoe width
L
Overall width
R180L C -7A
R180NL C -7A
500
(20
”
)
2750
( 9
’
1
”
)
2450
(8
’
04
”
)
H
L
2200
(7
’
3
”
)
8580
(28
’
2
”
)
3040
( 9
’
12
”
)
5100 (1 6
’
9
”
)
2 6 00
(8
’
6
”
)
8570
(28
’
1
”
)
3050
(10
’
0
”
) mm (ft
.
in)
6 00
(24 ”)
2850
( 9 ’ 5”)
2550
(8 ’ 4”)
700
(28
”
)
2 9 50
( 9
’
9
”
)
-
800
(32
”
)
3050
(10
’
1
”
)
-
10
5
0
20
15
5
10
15
20 feet
30
25
Working ranges R1 8 0LC-7A / R1 8 0NLC-7A Hydraulic adjustable boom
A
A'
F meter
10
9
8
5
4
7
6
1
0
3
2
1
2
3
4
5
6
9 8 7 6 5 4 3 2 1 0 meter
180LC-7A
30 25 20 15 10 5 0 feet
Boom length
Arm length
A
A ’
B
B
’
C
D
E
Max. digging reach
Max. digging reach on ground
Max. digging depth
Max. digging depth (8' level)
Max. vertical wall digging depth
Max. digging height
Max. dumping height
F Min. swing radius
5350
(17
’
7
”
)
4 6 70
(15 ’ 4 ” )
9 3 9 0
(30
’
10
”
)
66 80
(21
’
11
”
)
3130
(10 ’ 3 ” )
2200
(7
’
3
”
)
8750
(28 ’ 8 ” )
8 6 00
(28
’
3
”
)
54 6 0
(17
’
11
”
) mm (ft
.
in)
5100 (1 6
’
9
”
)
5750
(18
’
10
”
)
5030
(1 6 ’ 6 ” )
96 00
(31
’
6
”
)
69 00
(22
’
8
”
)
2 9 70
( 9 ’ 9 ” )
2 6 00
(8
’
6
”
)
9 110
(2 9 ’ 11 ” )
8 96 0
(2 9
’
5
”
)
5830
(1 9
’
2
”
)
R180LC-7A_new_en 25-10-2007 15:41 Pagina 17
L
ifting Capacities
Lifting capacities R1 8 0LC-7A Mono boom Rating over-front Rating over-side or 360 degree
• Boom : 5.10 m (16’ 9”) • Arm : 2.20 m (7’ 3”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*
*
*2
6630
*14620
10580
33 20
* 6630
*14620
* 10580
*2 33 20
*
*
*
*2
*
8440
*18610
6730
*14840
10510
3 170
8940
*19710
* 5810
*12810
*
*
*
*
8440
*18610
6730
*14840
9380
20680
8940
*19710
5810
*12810
*
*9
*
3 50
*11840
*
*14
*
3 70
*15720
*
*15540
*
*1
4240
5370
6520
7130
7050
6190
3 650
* 4240
*9
*
3 50
5370
*11840
5100
11240
4870
10740
4810
10600
4870
10740
*
*8
*
*9
*
*
*
3800
3
3
*111
80
4250
70
4780
*10540
5110
*11270
5050
3 0
3590
7910
3450
7610
3290
7250
3170
6990
3120
6880
* 3380
*7450
* 3320
*7 3 20
* 3340
*7 3 60
3230
7120
3160
6970
3310
7 3 00
* 3580
*7890
* 3360
*7410
* 3380
*7450
2730
6020
2230
4920
2010
44 3 0
1950
4 3 00
2030
4480
2330
5140
3090
6810
Reach m
(ft)
5.81
(19.1)
7.16
(2 3 .5)
7.92
(26.0)
8.30
(27.2)
8.34
(27.4)
8.06
(26.4)
7.42
(24.
3 )
6.28
(20.6)
• Boom : 5.10 m (16’ 9”) • Arm : 2.60 m (8’ 6”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*
*1
*
6320
3 9 3 0
9350
*20610
*
*1
*
6320
3 9 3 0
9350
*20610
* 7340
*16180
* 7700
*16980
* 7450
*16420
* 10020
*22090
* 9550
*21050
* 6930
*15280
*
*
7340
*16180
7700
*16980
* 7450
*16420
9260
20410
9390
20700
* 6930
*15280
* 4920
*10850
* 6170
*1 3 600
* 6950
*15 3 20
* 7070
*15590
* 6450
*14220
* 4590
*10120
* 4920
*10850
5120
11290
4850
10690
4740
10450
4770
10520
* 4590
*10120
*
*
*
*
*
*
2730
*6020
3480
*7670
3970
*8750
4550
*100 3 0
* 4980
*10980
5050
*111 3 0
4500
*9920
*
*6020
*
2730
3480
*7670
3460
76 3 0
3280
72 3 0
3130
6900
3060
6750
3090
6810
* 2540
*5600
* 3320
*7 3 20
* 3150
*6940
2340
5160
2270
5000
2200
4850
* 3060
*6750
* 3040
*6700
* 3090
*6810
*
*7560
*
3010
6640
2940
6480
3050
6720
3430
3350
*7 3 90
* 3060
*6750
2480
5470
2050
4520
1850
4080
1790
3 950
1860
4100
2100
46 3 0
2700
5950
Reach m
(ft)
8.68
(28.5)
8.42
(27.6)
7.81
(25.6)
6.75
(22.1)
6.33
(20.8)
7.56
(24.8)
8.28
(27.2)
8.64
(28.
3 )
• Boom : 5.10 m (16’ 9”) • Arm : 3.10 m (11’ 1”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
* 5980
*1 3 180
* 8450
*186 3 0
* 11670
*257 3 0
* 5980
*1 3 180
* 8450
*186 3 0
* 11670
*257 3 0
* 9480
*20900
* 8230
*18140
* 9760
*21520
* 10130
*22 33 0
* 8010
*17660
NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
* 9480
*20900
* 8230
*18140
9120
20110
9180
20240
* 8010
*17660
*
*9590
*
*12570
*
*147
*
*15480
*
4350
5700
6680
3 0
7020
6670
*14700
* 5360
*11820
* 4350
*9590
5150
11 3 50
4820
106 3 0
4670
10 3 00
4650
10250
4770
10520
* 2620
*5780
*
*6810
*
*7980
*
*9
*
*
3090
3620
4260
3 90
4790
*10560
4890
10780
4720
*10410
*
*
2620
*5780
3090
*6810
3460
76 3 0
3260
7190
3090
6810
2990
6590
2980
6570
* 1910
*4210
*
*6220
*
*7800
*
2820
3540
3490
7690
2950
*6500
* 1910
*4210
2330
5140
2240
4940
2150
4740
2110
4650
2620
5780
2710
5970
3000
6610
* 3270
*7210
* 2700
*5950
* 2730
*6020
* 2800
*6170
2690
59 3 0
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
* 2700
*5950
2200
4850
1840
4060
1660
3 660
1610
3 550
1660
3 660
1850
4080
2300
5070
Reach m
(ft)
9.10
(29.9)
8.85
(29.0)
8.28
(27.2)
7.30
(24.0)
6.92
(22.7)
8.05
(26.4)
8.73
(28.6)
9.06
(29.7)
HYUNDAI CONSTRUCTION EQUIPMENT 16 /
17
R180LC-7A_new_en 25-10-2007 15:41 Pagina 18
L
ifting Capacities
Lifting capacities R1 8 0LCD-7A Rating over-front Rating over-side or 360 degree
• Boom : 5.10 m (16’ 9”) • Arm : 2.20 m (7’ 3”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg kg lb kg lb lb kg lb kg lb lb kg lb kg
*
*
*2
6630
*14620
10580
33 20
* 6630
*14620
* 10580
*2 33 20
*
*
*
*2
*
*
8440
*18610
6730
*14840
10510
3 170
8940
*19710
5810
*12810
* 8440
*18610
* 6730
*14840
9920
21870
* 8940
*19710
* 5810
*12810
*
*
4240
*9
*
3
3 50
5370
*11840
* 6520
*14
*
3 70
7130
*15720
*
*15540
*1
7050
6190
650
*
*
4240
*9 3 50
5370
*11840
5390
11880
5170
11440
5100
11240
5160
11 3 80
*
*8
* 4250
*9
*
*10540
*
*11270
*
3800
3
3
*111
80
70
4780
5110
5050
3 0
3790
8
3650
8050
3490
7690
3370
74
3320
7
3
3
60
3 0
20
* 3380
*7450
* 3320
*7 3 20
* 3340
*7 3 60
* 3410
*7520
* 3520
*7720
* 3570
*7870
* 3580
*7890
* 3360
*7410
* 3380
*7450
2900
6 3 90
2380
5250
2140
4720
2080
4590
2170
4780
2490
5490
3280
72 3 0
Reach m
(ft)
5.81
(19.1)
7.16
(2 3 .5)
7.92
(26.0)
8.30
(27.2)
8.34
(27.4)
8.06
(26.4)
7.42
(24.
3 )
6.28
(20.6)
• Boom : 5.10 m (16’ 9”) • Arm : 2.60 m (8’ 6”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*
*1
*
6320
3 9 3 0
9350
*20610
*
*1
*
6320
3 9 3 0
9350
*20610
*
*
*
*
*
7340
*16180
7700
*16980
7450
*16420
10020
*22090
9550
*21050
* 6930
*15280
* 7340
*16180
* 7700
*16980
* 7450
*16420
9800
21610
* 9550
*21050
* 6930
*15280
* 4920
*10850
*
*1
*
6170
3
6950
*15
*
600
3 20
7070
*15590
* 6450
*14220
* 4590
*10120
* 4920
*10850
5410
119
11
3
33
0
5140
0
5040
11110
5060
11160
* 4590
*10120
*
*
*
*
*
*10980
*
*111
*
2730
*6020
3480
*7670
3970
*8750
4550
*100 3
3
0
4980
5050
0
4500
*9920
* 2730
*6020
* 3480
*7670
3660
8070
3480
7670
3330
7 3 40
3260
7190
3290
7250
*
*
*
2540
*5600
3320
*7 3 20
3150
*6940
2500
5510
2420
5 3 40
2360
5200
*
*
*
3060
*6750
* 3040
*6700
* 3090
*6810
* 3170
*6990
*
*7210
*74
*
3270
3370
*7 3
3 0
3430
*7560
3350
90
* 3060
*6750
2630
5800
2190
48
1980
4 3
1920
42
3
70
3
0
0
1990
4 3 90
2250
4960
2870
6 33 0
Reach m
(ft)
8.68
(28.5)
8.42
(27.6)
7.81
(25.6)
6.75
(22.1)
6.33
(20.8)
7.56
(24.8)
8.28
(27.2)
8.64
(28.
3 )
• Boom : 5.10 m (16’ 9”) • Arm : 3.10 m (11’ 1”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*1
*186
*
*
*
5980
3 180
8450
*257
3
3
0
11670
0
*
*
*1
*
5980
3 180
8450
*186 3 0
11670
*257 3 0
9480
*20900
8230
*18140
9760
*21520
*
*
*
*
10130
*22
*
33 0
8010
*17660
NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
* 9480
*20900
* 8230
*18140
9650
21270
9710
21410
* 8010
*17660
*
*9590
*
*12570
*
*147
*
*15480
*
4350
5700
6680
3 0
7020
6670
*14700
* 5360
*11820
* 4350
*9590
5440
11990
5120
11290
4960
109 3 0
4940
10890
5060
11160
* 2620
*5780
*
*6810
*
*7980
*
*9
*
*10560
*
*11020
*
3090
3620
4260
3 90
4790
5000
4720
*10410
*
*
2620
*5780
3090
*6810
3620
7980
3460
76
70
3
3
0
3290
7250
3190
0
3180
7010
* 1910
*4210
*
*6220
*
*7800
*
*8
*
2820
3540
3770
3 10
2950
*6500
* 1910
*4210
2480
5470
2390
5270
2310
5090
2260
4980
* 3010
*6640
* 3120
*6880
* 3230
*7120
* 3270
*7210
* 2700
*5950
* 2730
*6020
* 2800
*6170
* 2890
*6 3 70
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
* 2700
*5950
2340
5160
1970
4 3 40
1790
3 950
1730
3 810
1780
3 920
1980
4 3 70
2460
5420
Reach m
(ft)
6.92
(22.7)
8.05
(26.4)
8.73
(28.6)
9.06
(29.7)
9.10
(29.9)
8.85
(29.0)
8.28
(27.2)
7.30
(24.0)
R180LC-7A_new_en 25-10-2007 15:41 Pagina 19
Lifting capacities R1 8 0NLC-7A Rating over-front Rating over-side or 360 degree
• Boom : 5.10 m (16’ 9”) • Arm : 2.20 m (7’ 3”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg kg lb kg lb lb kg lb kg lb lb kg lb kg
*
*
*2
6630
*14620
10580
33 20
* 6630
*14620
* 10580
*2 33 20
*
*
*
*2
*
*
8440
*18610
6730
*14840
10510
3 170
8940
*19710
5810
*12810
* 8440
*18610
* 6730
*14840
7840
17280
8000
17640
* 5810
*12810
*
*
4240
*9
*
3
3 50
5370
*11840
* 6520
*14
*
3 70
7130
*15720
*
*15540
*1
7050
6190
650
* 4240
*9 3 50
4750
10470
4390
9680
4180
9220
4110
9060
4170
9190
*
*8
* 4250
*9
*
*10540
*
*11270
*
3800
3
3
*111
80
70
4780
5110
5050
3 0
3140
6920
3000
6610
2840
6260
2730
6020
2680
5910
* 3380
*7450
* 3320
*7 3 20
* 3340
*7 3 60
3220
7100
3140
6920
3290
7250
* 3580
*7890
* 3360
*7410
* 3380
*7450
2390
5270
1930
4250
1730
3 810
1670
3 680
1740
3 840
2010
44 3 0
2670
5890
Reach m
(ft)
(27.2)
8.34
(27.4)
8.06
(26.4)
7.42
(24.
3 )
6.28
(20.6)
5.81
(19.1)
7.16
(2 3 .5)
7.92
(26.0)
8.30
• Boom : 5.10 m (16’ 9”) • Arm : 2.60 m (8’ 6”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*
*1
*
6320
3 9 3 0
9350
*20610
*
*1
*
6320
3 9 3 0
9350
*20610
*
*
*
*
*
7340
*16180
7700
*16980
7450
*16420
10020
*22090
9550
*21050
* 6930
*15280
* 7340
*16180
* 7700
*16980
* 7450
*16420
7730
17040
7850
17 3 10
* 6930
*15280
* 4920
*10850
*
*1
*
6170
3
6950
*15
*
600
3 20
7070
*15590
* 6450
*14220
* 4590
*10120
4800
10580
4410
9720
4150
9150
4050
89 3 0
4070
8970
4250
9 3 70
*
*
*
*
*
*
2730
*6020
3480
*7670
3970
*8750
4550
*100 3 0
4980
*10980
5040
11110
4500
*9920
* 2730
*6020
3160
6970
3010
6640
2830
6240
2690
59 3 0
2620
5780
2650
5840
*
*
*
2540
*5600
3320
*7 3 20
3150
*6940
2020
4450
1950
4 3 00
1880
4140
*
*6750
*
*6700
*
*
3060
3040
3090
*6810
2990
6590
2920
6440
3040
6700
3420
7540
3350
*7 3 90
3040
6700
2160
4760
1770
3
3
900
1580
480
1530
33 70
1580
3 480
1800
3 970
2320
5110
Reach m
(ft)
6.33
(20.8)
7.56
(24.8)
8.28
(27.2)
8.64
(28.
3 )
8.68
(28.5)
8.42
(27.6)
7.81
(25.6)
6.75
(22.1)
• Boom : 5.10 m (16’ 9”) • Arm : 3.10 m (11’ 1”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
7.5 m
25.0 ft
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0 m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
*1
*186
*
*
*
5980
3 180
8450
*257
3
3
0
11670
0
*
*
*1
*
5980
3 180
8450
*186 3 0
11670
*257 3 0
9480
*20900
8230
*18140
9760
*21520
*
*
*
*
10130
*22
*
33 0
8010
*17660
NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
8330
18 3 60
7740
17060
7590
167 3 0
7650
16870
7870
17 3 50
*
*9590
*
*12570
*
*147
*
*15480
*
4350
5700
6680
3 0
7020
6670
*14700
* 5360
*11820
* 4350
*9590
4440
9790
4130
9110
3970
8750
3960
87 3 0
4070
8970
* 2620
*5780
*
*6810
*
*7980
*
*9
*
*10560
4860
10710
*
3090
3620
4260
3 90
4790
4720
*10410
*
*
2620
*5780
3090
*6810
3010
6640
2810
6190
2650
5840
2550
5620
2540
5600
* 1910
*4210
*
*6220
*
*7800
3470
7650
*
2820
3540
2950
*6500
* 1910
*4210
2010
44
1910
4210
1830
40
1790
3
3
3
0
0
950
2600
57 3 0
2690
59 3 0
2990
6590
* 3270
*7210
* 2700
*5950
* 2730
*6020
* 2800
*6170
2670
5890
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
2590
5710
1910
4210
1580
3 480
1410
3 110
1360
3 000
1400
3 090
1570
3 460
1970
4 3 40
Reach m
(ft)
6.92
(22.7)
8.05
(26.4)
8.73
(28.6)
9.06
(29.7)
9.10
(29.9)
8.85
(29.0)
8.28
(27.2)
7.30
(24.0)
HYUNDAI CONSTRUCTION EQUIPMENT 18 /
19
R180LC-7A_new_en 25-10-2007 15:41 Pagina 20
L
ifting Capacities
Lifting capacities R1 8 0LC-7A / R1 8 0NLC-7A Hydraulic adjustable boom Rating over-front Rating over-side or 360 degree
• Boom : 5.10 m (16’ 9”) • Arm : 2.20 m (7’ 3”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity Reach m
(ft)
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft lb kg lb lb kg lb kg lb kg lb kg kg lb kg
* 5870
*12940
* 5870
*12940
* 5880
*12960
* 9760
*21520
* 8470
*18670
*
*12960
20590
*
5880
9340
8470
*18670
*
*119
*
5410
3 0
6470
*14260
* 7010
*15450
* 6870
*15150
*
*1
5920
3 050
* 5410
*119 3 0
5080
11200
4840
10670
4780
10540
4860
10710
*
*
3840
*8470
* 4260
*9 3 90
* 4740
*10450
* 5030
*11090
4920
*10850
3600
7940
3450
7610
3270
7210
3140
6920
3100
68 3 0
* 3220
*7100
2270
5000
* 3370
*74 3 0
* 3340
*7 3 60
*
3200
7050
3140
6920
3290
7250
3320
*7
*
3 20
2910
*6420
*
2670
5890
2180
4810
1960
4 3 20
1900
4190
2000
4410
2290
5050
2910
*6420
7.24
(2 3 .8)
7.99
( 3 6.2)
8.36
(27.4)
8.41
(27.6)
8.13
(26.7)
7.50
(24.6)
6.37
(20.9)
• Boom : 5.10 m (16’ 9”) • Arm : 2.60 m (8’ 6”) • Bucket : 0.76 m 3 (0.99 yd 3 ) SAE heaped • Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) counterweight
Load point height m (ft)
1.5 m(5.0 ft) 3.0 m(10.0 ft)
Load radius
4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft)
At max. reach
Capacity
6.0 m
20.0 ft
4.5 m
15.0 ft
3.0m
10.0 ft
1.5 m
5.0 ft
Ground Line
-1.5 m
-5.0 ft
-3.0 m
-10.0 ft
-4.5 m
-15.0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
* 5710
*12590
* 8910
*19640
* 5710
*12590
* 8910
*19640
*
*14700
* 6670
*14700
* 9370
*20660
* 9130
*201
*
*1
6670
3 0
6310
3 910
*
*
*1
6670
*14700
* 6670
*14700
9220
20 33 0
* 9130
*201
6310
3
3 0
910
* 6150
*1 3 560
* 6860
*15120
* 6910
*152 3 0
* 6210
*1
*
3 690
4190
*9240
5110
11270
4820
106 3 0
4710
10 3 80
4750
10470
4190
9240
* 3990
*8800
* 4530
*9990
* 4910
*10820
* 4940
*10890
* 4310
*9500
3460
76 3 0
3260
7190
3110
6860
3040
6700
3080
6790
*
*
2920
*6440
3680
*8110
3630
8000
2330
5140
2250
4960
2190
48 3 0
* 3100
*68 3 0
* 3090
*6810
*
*7010
*
2970
6550
2900
6 3 90
3020
6660
3180
2940
*6480
2410
5 3 10
2000
4410
1800
3 970
1740
3 840
1820
4010
2060
4540
2640
5820
Reach m
(ft)
7.66
(25.1)
8.37
(27.5)
8.72
(28.6)
8.77
(28.8)
8.50
(27.9)
7.90
(25.9)
6.86
(22.5)
NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.
4. (*) indicates load limited by hydraulic capacity.
CERES SYSTEM
CERES (Construction Equipment Resource Support) is HHI’s new information system on all Hyundai
Construction equipment’s products for all overseas customer, dealer and branch office.
http://ceres.hhi.co.kr
R180LC-7A_new_en 25-10-2007 15:41 Pagina 21
N
otes
HYUNDAI CONSTRUCTION EQUIPMENT 20 /
21
R180LC-7A_new_en 25-10-2007 15:41 Pagina 22
N
otes
R180LC-7A_new_en 25-10-2007 15:41 Pagina 23
HYUNDAI CONSTRUCTION EQUIPMENT 22 /
23
R180LC-7A_new_en 25-10-2007 15:41 Pagina 24
Robex 180
LC-7A
Standard Equipment
ISO standard cab
•
All-weather steel cab with all-around visibility
•
•
Safety glass windows
Raise-up type windshield wiper
•
•
•
•
•
Sliding fold-in front window
Sliding side window
Lockable door
Hot & cool box
Accessory box & Ashtray
Computer Aided Power Optimization
(New CAPO) system
•
•
2-power mode, 3-work mode, 2-user mode
Auto deceleration & one touch deceleration
•
• system
Auto warm up system
Auto overheat prevention system
Air-conditioner (5,000 kcal/hr; 20,000 BTU/hr)
FATC (Full Automatic Temperature Control)
Self diagnostic system
Starting aid, cold weather
Centralized monitoring
•
LCD display
Engine speed
Clock & Error code
•
•
Gauges
Fuel level gauge
Engine coolant temperature gauge
Hyd. oil temperature gauge
Warning
Engine coolant & Fuel level
Check Engine & CPU
Engine oil pressure
•
Engine coolant temperature
Hyd. oil temperature
Low battery
Air cleaner clogging
Indicator
Power max.
Preheat & engine warming-up
One touch decel
Door and cab locks, one key
AM/FM radio and CD
• Radio remote switch
Two outside rearview mirrors
Fully adjustable suspension seat with seat belt
Slidable joystick, pilot-operated
Console box tilting system (LH.)
Three front working light
Electric horn
Batteries (2 x 12 V x 100 AH)
Battery master switch
Automatic swing brake
Removable reservoir tank
Water separator, fuel line
Boom holding system
Arm holding system
Counterweight (2 9 50 kg, 6 500 lb)
Mono boom (5.1 m, 1 6 ’ 9 ”)
Arm (2.
6 m, 8 ’ 6 ”)
Safety lock valve for boom cylinder with overload warning device
Single acting piping kit (breaker, etc)
Double acting piping kit (cramshell, etc)
Track shoes ( 6 00 mm, 24”)
Track rail guard
Fuel filler pump (35 l /min, 9 .5 USgpm)
Optional Equipment
Heater (7,500 kcal/hr; 30,000 BTU/hr)
Heater & Defroster
Sun visor for cabin inside
Beacon lamp
Safety lock valve for arm cylinder
Accumulator, work equipment lowering
12 volt power supply (DC-DC converter)
Electric. transducer
Travel alarm
Various optional Arms
•
•
Short arm (2.2 m, 7’ 3”)
Long arm (3.10 m, 10’ 2”)
Various optional Buckets (SAE heaped)
•
Standard bucket (0.76 m 3 , 0.99 yd 3 )
•
•
Narrow bucket (0.39 m 3 , 0.51 yd 3 )
Narrow bucket (0.50 m 3 , 0.44 yd 3 )
•
•
•
•
Narrow bucket (0.64 m 3 , 0.55 yd 3 )
Light duty bucket (0.89 m 3 , 1.16 yd 3 )
Light duty bucket (1.05 m 3 , 1.37 yd 3 )
Heavy duty bucket (0.69 m 3 , 0.9 yd 3 )
Cabin lights
Cabin FOPS/FOG (ISO/DIS 102 6 2)
Cabin Roof-cover Transparent
Track shoes
•
•
•
Triple grousers shoe (500 mm, 20”)
Triple grousers shoe (700 mm, 28”)
Triple grousers shoe (800 mm, 32”)
Lower frame under cover
Pre heating system
Tool kit
Operator suit
Special cooling
•
Air vent type side door
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards. All US measurment rounded off to nearest pounds or inches.
PLEASE CONTACT www.hyundai-ce.com
EN - 2007. 07 Rev 0

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Applied Tier III Engine for maximum power and performance
- Wide and comfortable cab with excellent visibility and low noise levels
- Fully adjustable seat, sliding front and side windows, and a large sunroof for operator comfort
- Advanced hydraulic system for precise and efficient operation
- Self-diagnosis system for easy troubleshooting
- New mode control system for optimizing performance and fuel consumption