24
24" Monolith Freezer
MF 2451
24"
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Freezer capacity cu.ft. (l)
Number of shelves
Number of door racks
Number of FrostSafe drawers
Electronic control
Freezer temperature range °F (°C)
Defrost type
Interior light
Water filter
IceMaker
Ice cube output lbs. (kg) / 24h
Ice cube stock lbs. (kg)
Door hinges
Product dimensions in inch H / W / D in cm H / W / D
Cut out dimensions in inch H / W / D in cm H / W / D
Net weight lbs. (kg)
Voltage V / Hz
490
59 *
40 **
11.4 (325)
4
3
3
InfinitySwipe
+7 °F to –17 °F (–14 °C to –27 °C) automatic
InfinityLight yes fixed water connection
3.5 (1.6)
4.0 (1.8) left, reversible ***
83 3/4" / 23 3/4" / 24"
212.6 / 60.2 / 61
84" / 24" / 24"
213.4 / 61 / 61
308.6 (140.0)
115 / 60
* Estimated energy cost will depend on utility rates and use. Estimated energy cost based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
Available Accessories
· Stainless Steel door panel
· Monolith brushed aluminum square handle
· Monolith Stainless Steel round handle
· Monolith brushed aluminum soft-edge handle
See pages 26–27 for available accessories.
Product Dimensions
IMPORTANT!
Stated minimum height dimensions include when the leveled feet are fully inserted.
Height can be increased by a maximum of
1" (26 mm) by turning the adjust able feet.
When the appliance is fitted in the recess, the appliance must be raised by turning the adjustable feet so that the appliance top has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Cut out Dimensions
Continuous Toe Kick Individual Toe Kick
Inset
A = 10 3/4" (273 mm)
B = 1/2" (12.5 mm)
C = 25 7/8" (658 mm)
Frameless
A = 11" (279 mm)
B = 1/2" (12.5 mm)
C = 26 3/8" (670 mm)
Dimension A = without mounted door handle
A
Cabinet depth frameless installation style = 24" (610 mm)
Cabinet depth inset installation style = 24" (610 mm) plus panel thickness
B
This is the point where the power cord exits from the appliance rear. 3/4" (19 mm) from the left and 5"
(127 mm) from the floor. Free length of the power cord is 98" (2.5 m).
C
The appliance has a recess in this area for cable and waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
D
This surface is visible when the appliance door is open.
Designed finish is required.
Door Panel Dimensions
24" recess
Inset installation style
H = 79 7/8" (2029 mm)
W = 23 3/4" (603 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping dimension to the panel on the top.
W = 24" (610 mm) Add overlapping dimension to the panel on both sides.
Maximum panel weight = 52 lbs. (24 kg)
25
