CLXmusic BULLIT 300P Owner Manual
CLXmusic BULLIT 300P is a versatile audio mixer with a range of features for various audio applications. It includes two wireless microphone inputs, allowing for mobile use in events or presentations. The built-in 5-band EQ and digital delay effector offer precise sound control, while the Bluetooth input enables wireless music streaming from smartphones or tablets. Additionally, the mixer has a DVD player with USB support for playing audio and video content. The USB sound card socket allows for direct connection to a computer for recording and playback.
PDF
Download
Document
Advertisement
Advertisement
300 P 300 A BULLIT 300A BULLIT 300P FEATURE 2 wireless microphone(UHF) inputs 2 channels for microphone input 1 group of LINE INPUT and LINE OUTPUT Built-in Built-in Built-in Built-in 5-band EQ digital delay effector blue tooth input DVD player with USB socket and remote control Built-in USB sound card socket connected to computer Power supply: AC115V/60Hz~230V50Hz BULLIT 300A PANEL DESCRIPTION 1. DVD PLAYER The DVD player accepts a CD/VCD/DVD or udisk with LED display and remote control. A video out socket (RCA) for connecting. 2. ANT1 & ANT2 This interface is connected to antenna which receive signal from wireless microphone. 3. SELECT FREQUENCY TO RECEIVE These are used to select a frequency(the same to wireless microphone) for receiving signal from wireless microphone. 4. EQ Super musical 5-band equalizer for output channel. 5. WI-MIC VOLUME CONTROL These knobs determine the proportion of wireless microphone signal in the mix, and provide a visual indication of level. 6. DIGITAL DELAY 1 3 3 2 2 4 5 7 8 7 The signal from the input channels, processed by the digital delay effector, will feed to the master output. There are three knobs here to control the effect of digital delay. 12 13 REPEAT To increase the rate of the delays, turn this knob clockwise. You will hear the signal repeat at a faster rate. 18 300 A 19 6 9 11 10 11 14 16 17 15 20 21 TIME This knob adjusts the delay time, turn it clockwise to increase the delay time between two delays. EFF VOL This knob adjusts the mix level of the effect sound which will be feed to main mix. 7. MIC INPUT The MIC inputs accept XLR phone jack. Please use a low impedance microphone and a properly wired cable for best result. 8. MIC VOLUME CONTROL These control determine the proportion of the MIC channel signal in the mix, and provide a visual indication of channel level. 9. HIGH EQ. Turn this knob clockwise to boost high frequency. The control has a shelving response giving 15dB of boost or cut at 10kHz. 10. LOW EQ. Turn this knob clockwise to boost low frequency. The control has a shelving response giving 15dB of boost or cut at 100Hz. 11. EFFECT This knob decides the signal level which will be sent to the inside digital delay effect. 12. LINE IN The LINE IN (with RCA sockets) allows cassette recorder or CD player to the Main output. 13. LINE OUT The LINE OUT(with XLR socket) provides signal output to a cassette deck and home audio equipment. 14. LINE VOLUME CONTROL This knob determines the proportion of the LINE channel signal in the mix, and provide a visual indication of channel level. 15. CHANGE INPUT SOURCE There are 4 input sources for your choose: Line, BLT, DVD and USB. 16. MASTER CONTROL This knob adjusts the final level of the Main output. 17. POWER INDICATOR When the power switch is turned on, this indicator will illuminate, so the user may be aware of it. 18. USB SOUND CARD SOCKET The USB sound card socket connected to computer and controlled by computer. It can record when playing by computer. 19. SPEAKER OUTPUT SOCKET Speakers can be connected to this socket, two speakers can be connected to the powered mixer. When using 2 speakers at the same time, use 8~16ohm speakers. When using one speaker only, use a 4~8ohm speaker, the total minimum load is 4ohm, if the total load is less than 4ohm, it may damage this powered mixer. 20. POWER SWITCH This switches the powered mixer on or off. 21. POWER INPUT CONNECTOR WITH FUSE The POWER INPUT CONNECTOR is connected to electrical outlet by power cord. The powered mixer can be supplied with AC115V/60Hz~230V/50Hz. BULLIT 300P PANEL DESCRIPTION This panel is put in another sound box, and this box is the pair to the BULLIT 300A box. The socket on this panel connected to the SPEAKER OUTPUT SOCKET(19). 300 P 3 ">

Public link updated
The public link to your chat has been updated.
Advertisement