Ericsson T18S Owner Manual

Add to my manuals
96 Pages

advertisement

Ericsson T18S Owner Manual | Manualzz

Ericsson T18s

Third edition (October 1999)

This manual is published by Ericsson

Mobile Communications AB, without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Ericsson

Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this manual.

All rights reserved.

©Ericsson Mobile Communications AB,

1999

Publication number: EN/LZT 108 2526 R1C

INNOVATRON PATENTS

Contents at a Glance

Getting Started 3

Preparing Your Phone for Use 4

Turning Your Phone On and Off 9

Display Information and Key Functions 11

Making and Receiving Calls 14

During a Call 17

Functions and Settings 19

Using the Menu System 20

Your Personal Phone Book 22

Using the Call List 28

Your Voice Mail Service 30

Personalizing Your Phone 31

Sending and Receiving Text Messages (SMS) 37

Diverting Incoming Calls 45

Security for Your Phone and Subscription 47

Handling More than One Call Simultaneously 54

Setting Network Preferences 59

Knowing the Call Time/Call Cost 62

Using Two Voice Lines 64

Calling from Your Car 65

Voice Recognition 67

Calling Card or Credit Card Calls 71

Sending and Receiving Faxes and Data 73

Some Useful Functions 74

Additional Information 77

Troubleshooting 78

Quick Keys 80

Technical Data 81

Glossary 82

Guidelines for Safe and Efficient Use 86

Warranty 90

Declaration of Conformity 92

Index 93

Please note!

Some of the services in this manual are not supported by all networks. This also applies to the GSM International Emergency

Number 112.

Please contact your network operator or service provider if you are in doubt whether you can use a particular service or not.

The symbol on our products signifies that they have been certified according to the EMC directive 89/336/EEC, the Telecommunications directive 91/263/EEC, and the Low Voltage directive

73/23/EEC when applicable. The products fulfil the requirements according to the following standards:

Cellular Phones and Accessories in Combination:

ETS 300 342-1 EMC for European digital cellular telecommunications.

Accessories Without Direct Connection to a Cellular Phone:

EN 50081 Electromagnetic compatibility, Generic Emission

Standard, and EN 50082 Electromagnetic compatibility, Generic

Immunity Standard.

GETTING STARTED

Preparing Your Phone for Use 4

Turning Your Phone On and Off 9

Display Information and Key Functions 11

Making and Receiving Calls 14

During a Call 17

Preparing Your Phone for Use

OVERVIEW

Front

Indicator light

Volume keys

Antenna

Earpiece

Display

Keypad

Flip

Microphone

Microphone channel

Back

SIM release button

Threaded hole for belt clip

Battery

Battery release catch

4 Preparing Your Phone for Use

ASSEMBLY

You need to do the following to use your phone:

• insert the SIM card

• attach the battery to the phone

• charge the battery

THE SIM CARD

When you register as a subscriber with a network operator, you get a SIM

(Subscriber Identity Module) card. The SIM card contains a computer chip that keeps track of your phone number, the services included in your subscription, and your Phone Book information, among other things.

SIM cards come in two sizes. One is the size of a credit card, and the other is smaller. Your phone uses the smaller card. Many credit card-sized SIM cards have a perforated smaller card that you can take out easily. Before you can use your phone, you must insert the SIM card as shown below.

Inserting the SIM Card

1.

Remove the battery (if attached).

2.

Slide the SIM card into the SIM card slot with the golden con-

Removing the SIM Card nectors facing down and the cut corner turned to the left.

1.

Remove the battery (if attached).

2.

Slide the SIM release button towards you.

3.

Pull out the SIM card.

Preparing Your Phone for Use 5

The PIN

Most SIM cards are supplied with a security code or PIN (Personal Identity

Number), which you need to access the network. Every time you turn on your phone, it prompts you to enter your PIN. You will find your PIN in the information from your operator.

Some operators may have services that require a second PIN, your PIN2.

You should be careful with your PIN, since it is your protection against unauthorized use of your subscription.

If your PIN is entered incorrectly three times in a row, the SIM card is blocked. If this happens, you can unlock it by using your PUK (Personal

Unblocking Key code), which you also get from your operator.

THE BATTERY

Your phone comes with a nickel metal hydride (NiMH) battery. The battery is not charged when you buy your phone, but there may be enough power to turn the phone on. We recommend that you charge the battery before you use the phone for the first time.

Attaching the Battery to your Phone

6

• Place the battery on the back of the phone and push until you hear a click.

When to Charge the Battery

The nickel metal hydride battery that comes with your phone can be charged whenever you wish without affecting its performance. This is not the case with the cheaper nickel cadmium type batteries, often sold as accessories by other suppliers. For the best talk and standby time in the long run, we recommend that you use only Ericsson original batteries with your phone.

To remind you that you will soon need to charge the battery or replace it with a charged one:

• an alarm signal (a long beep) sounds and the message Battery low appears for ten seconds in the display. The signal is repeated several times.

Preparing Your Phone for Use

• the indicator light on the top of the phone starts flashing red.

Note!

The phone turns itself off when the battery can no longer power it satisfactorily.

Charging the Battery

1.

Make sure that the battery is attached to the phone.

2.

Connect the charger to the mains.

3.

Connect the charger to the phone as shown in the picture. The flash symbol on the plug must face upwards.

To indicate charging:

• the battery meter in the display pulses continuously.

• the indicator on the top of the phone shows a steady red light (or green, if the phone is turned on).

When the battery is fully charged, the battery meter in the display is full and the indicator on the top of the phone shows a steady green light.

Tip!

You can use the phone while the battery is being charged. However, this increases the charging time.

Disconnecting the Charger

• Bend the plug connected to the phone upwards and pull it out.

Preparing Your Phone for Use 7

Removing the Battery

1.

Turn off the phone.

2.

Press the catch on the bottom of the battery.

3.

Lift the battery up and away from the phone.

8 Preparing Your Phone for Use

Turning Your Phone On and Off

Enter

PIN

Enter

PIN

****

NETWORK

00:00

TURNING YOUR PHONE ON

• Press and hold the N O (ON/OFF) key until you hear a click.

If “Enter PIN” Appears in Display

Some SIM cards are protected with a PIN code. If Enter PIN appears in the display after you have turned on the phone, do this:

1.

Enter your PIN. If you make a mistake while entering your PIN, erase the wrong digit by pressing the C L R key.

2.

Press Y E S .

Note!

If your PIN is entered incorrectly three times in a row, the SIM card is

blocked. You can unblock it by using your PUK, see “Security for Your Phone and Subscription” on page 47.

Network Search

After you have turned on the phone (and entered your PIN), the Ericsson logo appears in the display and the phone searches for a network.

When a network is found, the phone beeps three times. The indicator light on the top of the phone flashes green once every second and your network operator’s name (in most cases abbreviated) appears in the display.

This is called standby mode. You can now make and receive calls.

INITIAL SETTINGS

The first time you turn on your phone, you may want to change the language in the display, choose the ring signal type and set the clock. For more informa-

tion about these settings, see “Personalizing Your Phone” on page 31.

Display Language

Most modern SIM cards automatically set the display language to the language of the country where you bought your SIM card. If this is not the case,

the default language is English. To change the display language, see “Display

Language” on page 34.

Turning Your Phone On and Off 9

NETWORK

16:21

112 only

16:21

No network

06:01

If your phone displays a language you do not understand, you can change it to

English.

To change the display language to English

1.

Press the C L R key.

2.

Press the L E F T arrow key.

3.

Enter 0 0 0 0 .

4.

Press the R I G H T arrow key.

NETWORK

Normally, the name of a network appears in the display after you have turned your phone on, but sometimes there is no network that you can use. The display then shows one of the following:

112 only

If the message 112 only is displayed, you are within range of a network, but you are not allowed to use it. However, in an emergency, some operators allow

you to call the international emergency number 112. See “Making Emergency

Calls” on page 15.

No network

If the message No network is displayed, there is no network within range or the received signal is too weak. You have to move to get a stronger signal.

TURNING YOUR PHONE OFF

• In standby mode, press and hold the N O (ON/OFF) key until you hear a click.

10 Turning Your Phone On and Off

Display Information and Key Functions

DISPLAY INFORMATION

Your phone display will help you to:

• verify that you are dialling correctly

• check your signal strength and service availability

• find out if you have received messages

• check which line is in use if you have the Alternate Line Service (ALS)

• check battery level

Icons in the Display

Icons are displayed when specific functions are active or if you have received a message. The figure in the margin shows an overview of all the possible icons and where they appear.

The table below shows every icon separately and also gives you an explanation.

Icon/Indicator: Name:

Signal strength meter

Battery meter

Description:

The strength of the received signal is indicated in steps. Six steps indicate the strongest signal.

Indicates the current state of the battery. The fuller the icon, the more power there is.

The keypad is locked.

Keypad lock indicator

Divert indicator

Silent ring signal

An arrow means that the function is active.

Divert all

A crossed note means that no sound can be heard when you receive a call.

SMS indicator The envelope icon means that you have received a text message (SMS).

Voice mail indicator The tape loops mean that you have received a voice message. Will not appear on all networks.

Display Information and Key Functions 11

Icon/Indicator: Name:

Line indicator

Description:

Tells you which line is in use if you have the Alternate Line Service.

Home zone indicator

The house icon indicates that the phone is within the home zone. Will not appear on all networks.

KEY FUNCTIONS

The keys have other functions when you access the menu system “Using the

Menu System” on page 20.

Key:

Y E S

N O

Use:

To make calls and answer calls.

To turn the phone on or off. Press and hold the key.

To end a call.

To access and navigate (scroll through) the menu system.

L E F T and R I G H T arrow keys

C L R (Clear)

Number keys

Star

Hash

Volume keys

U P and D O W N

To erase digits from the display. Press and hold the key to erase all digits.

To mute the microphone during a call. Press and hold the key.

To turn the ring signal on/off in standby mode. Erase all digits from the display. Then press and hold the key. The symbol for silent ring signal is shown in the display when the ring signal is turned off.

To silence the ring signal when you receive a call. Press the key briefly

To enter the digits 0-9.

The 0 key enters the international prefix (+) if held down.

To enter a star (*) character.

If held down it enters a p (pause).

To enter #.

To terminate the input of PIN and security codes.

If held down it enters the phone icon.

To increase or decrease the volume of the earpiece or handsfree loudspeaker during a call.

To show today’s date in the display during standby.

To reject a call, double-click a volume key.

12 Display Information and Key Functions

ACTIVE FLIP

The phone has an active flip. This means that you can answer a call by opening the flip, and end it by closing the flip.

Note!

If you use the phone with portable handsfree, closing the flip does not end the call. You may close the flip and carry on the conversation. To end the call, you must press N O .

Disabling the Active Flip Function

• Holding down a V O L U M E key while opening the flip does not answer an incoming call.

• Holding down a V O L U M E key while closing the flip does not end a call.

Display Information and Key Functions 13

Making and Receiving

Calls

NETWORK

0123456789

01:06

Julia

+3456789012

In this chapter, we assume that you have turned on your phone and that you are within range of a network. If you are abroad, you may use other networks, provided your home network has an agreement that allows you to do this (see

also “Setting Network Preferences” on page 59).

MAKING A CALL

1.

Enter the area code and phone number.

2.

Press Y E S .

While a call is in progress, a time counter automatically starts and you can see how long you have been on the phone. If you have activated the Call Cost

option (see “Knowing the Call Time/Call Cost” on page 62) and your network

and SIM card supports it, you see the price of the call in the display.

ENDING A CALL

• Close the flip or press N O to end the call.

Note!

If you use the phone with portable handsfree, you must press N O to end

the call. See “Active Flip” on page 13.

RE-DIALLING A PREVIOUSLY CALLED NUMBER

1.

Clear the display using C L R .

2.

Press Y E S .

3.

Press an arrow key until the number (and name) you want to call appears.

4.

Press Y E S to make the call.

Automatic Re-dialling

If the display shows Retry?

you can re-dial the number by pressing Y E S . Your phone automatically re-dials (up to 10 times)

• until the call is answered. When the call is answered, you hear a beep followed by a ring signal.

• until you press a key or receive a call.

14 Making and Receiving Calls

Answer?

Busy tone

Tommy

+2345678901

Answer?

Janina

+234343556

MAKING INTERNATIONAL CALLS

1.

Press and hold the 0 key until a + sign appears.

2.

Enter the country code, area code (without any leading zero) and phone number.

3.

Press Y E S .

MAKING EMERGENCY CALLS

1.

Enter 11 2 (the international emergency number).

2.

Press Y E S .

The international emergency number 112 can be used in most countries, with or without a SIM card inserted, if a GSM network is within range.

Note!

Some network operators may require that a SIM card is inserted, and in some cases that the PIN code has been entered, as well.

Some networks may not use the international emergency number, 112.

In a number of countries, the emergency number is 999 instead.

If you are unsure of what emergency number is used in your country, please contact your network operator or service provider.

WHAT HAPPENS WHEN I RECEIVE A CALL?

The phone rings and the indicator light on the top of the phone flashes green rapidly. The display shows Answer?

.

Tip!

The phone has an in-built vibrating unit which allows you to receive

calls discretely. See “Vibrating unit” on page 33.

Answering a Call

• Open the flip.

• If the flip is open, press Y E S .

Rejecting a Call

• Double-click one of the volume keys on the side of the phone.

• If the flip is open, you can either press N O or close the flip, as well.

The caller hears a busy tone if the function is supported by the caller’s network. If Divert on Busy is activated, the call is diverted to the number you

have specified. See “Diverting Incoming Calls” on page 45.

CALLING LINE IDENTIFICATION (CLI)

If your subscription includes the Calling Line Identification service and the caller’s network sends the number, you see the caller’s number at the bottom of the display when you receive a call. If the number is stored with a name in the phone book, the name is also shown in the display.

Making and Receiving Calls 15

CIPHERING

Ciphering is a built-in feature that scrambles your calls and messages to provide additional privacy.

An exclamation (!) mark, shown next to the handset icon in the display during a call, indicates that ciphering is currently not being provided by the network.

VOICE DIALLING AND ANSWERING

The phone allows you to make and answer calls using your voice

Refer to “Voice Recognition” on page 67 for more details.

16 Making and Receiving Calls

During a Call

Your phone has several functions which you might find helpful while a call is in progress.

CHANGING THE EARPIECE VOLUME

To change the earpiece volume during a call

• Press the volume keys ( U P or D O W N ) on the side of the phone.

Pressing U P increases the volume.

Pressing D O W N decreases the volume.

MUTING THE MICROPHONE

To turn the microphone off temporarily during a call

1.

Press and hold the C L R key.

Mute appears in the display.

2.

To continue your conversation, release the C L R key.

Tip!

Instead of pressing and holding the C L R key, you can put the call on hold.

To put the call on hold

1.

Press Y E S .

1 on hold appears in the display.

2.

To continue your conversation, press Y E S again.

SCRATCH PAD FUNCTION

If you need to make a note of a phone number during a call, you can use the

Scratch Pad.

To use the scratch pad

• Use the number keys to enter the number.

When you end the call, the number remains in the display. You can now call the number by pressing Y E S

, or save it in the Phone Book (see “Your Personal

Phone Book” on page 22).

During a Call 17

SENDING TONE SIGNALS

To use telephone banking services or to control an answering machine, you need to use codes. These codes are sent as tone signals (also known as DTMF tones or touch tones).

• Press the appropriate keys (0-9, * and #).

Tip!

You can also save a code together with a phone number in the Phone

Book. See “Your Personal Phone Book” on page 22.

CHECKING DURATION/COST OF CALL

During a call, the display shows the duration in minutes and seconds. If you prefer, you can have the call cost displayed, provided your network and your

SIM card support this feature. See “Knowing the Call Time/Call Cost” on page 62 on how to use this feature.

MORE THAN ONE CALL SIMULTANEOUSLY

Your phone is capable of handling more than one call simultaneously. You can put the current call on hold, and then make or answer a second call. You can

also set up a conference call with up to five people. See “Handling More than

One Call Simultaneously” on page 54 on how to use this feature.

18 During a Call

FUNCTIONS AND SETTINGS

Using the Menu System 20

Your Personal Phone Book 22

Using the Call List 28

Your Voice Mail Service 30

Personalizing Your Phone 31

Sending and Receiving Text Messages (SMS) 37

Diverting Incoming Calls 45

Security for Your Phone and Subscription 47

Handling More than One Call Simultaneously 54

Setting Network Preferences 59

Knowing the Call Time/Call Cost 62

Using Two Voice Lines 64

Calling from Your Car 65

Voice Recognition 67

Calling Card or Credit Card Calls 71

Sending and Receiving Faxes and Data 73

Some Useful Functions 74

Using the Menu System

You can find all your phone functions in the menu system. You use the menu system every time you want to change a setting in your phone, such as the ring signal. You also use the menus to get the most out of your phone: to set the alarm clock, send text messages, store important phone numbers, etc.

The menus are arranged in a continuous loop, which you move (scroll) through with the R I G H T and L E F T arrow keys. Each menu contains a list of options. Some menus have sub-menus with additional options.

MOVING THROUGH THE MENU SYSTEM

Press… to… scroll clockwise through menus or functions.

R I G H T

L E F T

Y E S

N O scroll anti-clockwise through menus or functions.

select a menu or function, enter a submenu.

go back one level in the menu system and/or leave a setting unchanged.

go back to the standby display.

C L R

Instead of pressing the R I G H T or L E F T key repeatedly, you can press and hold it down until you reach the menu or submenu you want.

Note!

If you enter the menu system, but do not press a key within 60 seconds, the phone returns to standby mode.

Scrolling and Selecting

• Use the arrow keys to scroll from menu to menu. Press the L E F T or

R I G H T arrow keys until you reach the menu or function that you need.

• Press the Y E S key to select a menu or function.

20 Using the Menu System

<

Menu

Mail >

<

Mail

Read messages

>

<

Mail

Send message

>

INTERPRETING THE INSTRUCTIONS IN THE MANUAL

Example:

• Scroll to Mail , Y E S , Send message , Y E S .

Interpret this instruction as follows:

1.

From the standby mode, use the L E F T or R I G H T arrow keys to scroll to the Mail menu. The arrows on either side of the word Mail mean that you can scroll to another menu.

2.

Press Y E S to select the menu.

Now you are in the Mail menu.

The name of the menu that you have chosen is shown at the top of the display ( Mail ).

Use the L E F T or R I G H T arrow keys to scroll to the Send message function.

3.

Press Y E S to select the function.

DISPLAY TEXT AND SYMBOLS

When you move through the menu system, the display changes. The following hints can help you:

• When arrows are displayed next to the name of a menu or function, there are more options you can scroll through with the R I G H T / L E F T (arrow) keys.

• Text in brackets shows the current setting of the function shown in the display.

In this manual, we have chosen to exclude some of the details above in the pictures of the displays. This is so that it will be easier for you understand the display texts in the margins. Below is an overview of the default menus.

NETWORK

06:01

Menu

< Phone book >

Menu

< Ring level >

<

Menu

Mail > <

Menu

Info >

<

Menu

Tools >

<

Menu

Settings >

<

Menu

Access >

<

Menu

Divert >

Menu

< Networks >

Using the Menu System 21

Your Personal

Phone Book

Jenny Andersson

(4)

+461234567890

Janina Huss

( 4)

+451234567890

You can create a personal phone book by storing phone numbers and accompanying names on the SIM card (SIM memory) and in the phone (phone memory). You use the Phone Book menu for storing and recalling all the phone numbers in your personal phone book.

If you intend to use your phone abroad, you should store all the phone numbers as international numbers, that is with the (+) sign – which automatically will be replaced by the international dialling prefix for the country you are calling from – followed by the country code, then the area code and the phone number.

Every phone number that you store includes a position number, shown in brackets.

You can store the phone numbers together with a name tag to make it easier for you to keep track of your phone numbers. If the position number has a phone icon next to it, this means that you are storing the phone number in the phone memory and cannot take it with you if you change phones. The phone memory can hold up to 99 phone numbers.

Note!

In the Phone book menu, press # to enter the phone icon. Outside the

Phone book menu, you must press and hold # to enter it.

22 Your Personal Phone Book

Store

Name:Jenny_

12

+1234567

ENTERING LETTERS

You can only enter letters when you are using the phone book and when you

are composing a short message (SMS), see “Sending and Receiving Text Messages (SMS)” on page 37.

0

#

8

9

6

7

4

5

2

3

Press…

1

Press the appropriate key, 1–9, 0 or #, repeatedly until the character you want appears in the display.

to get…

Space - ? ! ‚ . : ; " ’ < = > ( ) 1

A B C Å Ä Æ à Ç 2

Γ

D E F è É 3

∆ Φ

G H I Ì 4

J K L 5

Λ

M N O Ñ Ö Ø ò 6

P Q R S ß 7

Π Σ

T U V Ü ù 8

W X Y Z 9

+ & @ / ¤ % $ £ ¥ § ¿ ¡ 0

Θ Ξ Ψ Ω

# *

For example

• To enter an A , press 2 once.

• To enter a B , press 2 twice.

To enter small letters

• Enter the letter, for example an A , and then press *. An a appears. Small letters now appear until you press * again.

To enter digits

• Press and hold the number key.

STORING A NUMBER TOGETHER WITH A NAME

1.

Enter the area code and phone number you wish to store.

2.

Scroll to Phone book , Y E S , Store , Y E S .

The first free memory position is suggested.

3.

Enter the name tag that you want to associate with the number.

4.

Press Y E S to store the name and number.

Record voice label now?

appears.

5.

If you do not want to record a voice label, press N O .

If you want instructions on how to record a voice label, please refer to

“Voice Recognition” on page 67.

Your Personal Phone Book 23

Store

Name:Bank

15

+123467890p2345

Store

Used

Overwrite?

15

24

Storing in a Different Position than Suggested

After you have entered a name and phone number to be stored, you can choose what position to store the number in.

To store in a position of your choice in the SIM memory

• Press R I G H T (repeatedly) until the suggested position number disappears.

Then enter a position number of your choice. Press Y E S to store.

To store in the first empty position in the phone memory

• Press R I G H T (repeatedly) until the suggested position number disappears.

Then press # twice, followed by Y E S .

To store in a position of your choice in the phone memory

• Press R I G H T (repeatedly) until the suggested position number disappears.

Press # once. Enter the position number, followed by Y E S .

Telephone Banking Services

If you use telephone banking services, you can store the phone number of your banking service together with your personal code(s).You must insert a p

(pause) between the phone number and the code(s). You insert a p by pressing and holding the * key. Usually, a # (hash) is required after each code. Talk to your bank if you are in doubt about how to use # and p.

Note!

It may be a risk to store your codes in case the phone is stolen.

To store a phone number together with code(s)

1.

Scroll to Phone book , Y E S , Store , Y E S .

2.

Enter the name that you want associated with the phone number and code(s).

3.

Press Y E S .

4.

Enter the phone number, followed by p and the code(s).

5.

Press Y E S to store.

OVERWRITE PROTECTION

If you try to store a phone number in a position which already contains a phone number, the message Used Overwrite?

appears in the display.

Then do one of the following:

To store in the selected position

• Press Y E S to replace the number with the new one.

To store in a different position

1.

Press N O .

2.

Enter the new position number.

Your Personal Phone Book

Name recall

Name:Embla

3.

Press Y E S .

When a Memory is Full

If you try to store a phone number and the memory you want to store it in is full, the phone suggests a position number in the memory that is not full.

When Both Memories are Full

If both memories are full, the phone does not suggest a storage position. If you still want to store the number, you have to erase an old number by entering a position that is already occupied and press Y E S .

Erasing a Storage Position from the SIM Memory

1.

Scroll to Phone book , Y E S , Erase , Y E S .

2.

Enter, or scroll to, the position number you want to erase.

3.

Press Y E S .

Erasing a Storage Position from the Phone Memory

1.

Scroll to Phone book , Y E S , Erase , Y E S .

2.

Press #. The phone icon appears.

3.

Enter, or scroll to, the position number you want to erase.

4.

Press Y E S .

Note!

If you choose Erase all from phone , all phone numbers that are stored with the phone icon are lost.

USING THE PHONE BOOK

There are two ways of using the phone book: you can either call a number by using the name tag stored with it; or you can call the number by using the memory position that the number is stored in.

Calling Using the Name

1.

Clear the display.

2.

Scroll to Phone book , Y E S , Name recall , Y E S .

3.

Enter the name of the person you want to call, or scroll with the arrow keys until you find it.

4.

Press Y E S to call the number.

Shortcut to Name Recall

The digit keys 2 – 9 correspond to the first names that start with A, D, G, J, M,

P, T and W respectively. For example, press and hold down the 4 key to find the first name that starts with a G. Then you can scroll with the arrow keys to find the the name you are looking for. If there is no name stored under G, the first name under H is displayed, an so on.

Your Personal Phone Book 25

Position recall

Position: 10

Edit

Name:Alfrd

12

+1234567_

Edit

Name:Alfre_d

12

+1234567

Calling Using the Position

1.

Clear the display.

2.

Scroll to Phone book , Y E S , Position recall , Y E S .

3.

Enter the position number you want to call, or scroll with the arrow keys until you find it.

4.

Press Y E S to call the number.

Speed Dialling (Memory Positions 1 - 9)

Note!

Speed dialling can only be used when the phone is in standby.

1.

Clear the display.

2.

Enter the position number, 1 – 9 , and press Y E S .

KEEPING THE PHONE BOOK UP TO DATE

Sometimes people change their names, their phone number or even both. To get the best use out of your phone book, you want the names and numbers to be correct. They are easily changed with the Edit Phone Book feature. If someone has changed both name and number, it might be easier to overwrite the old storage position with the new one, instead of changing both name and number separately.

Changing a Phone Number in Your Phone Book

1.

Clear the display.

2.

Scroll to Phone book , Y E S , Edit , Y E S , Find name .

3.

Enter the name and press Y E S .

4.

Press R I G H T once to move the cursor to the row with the phone number.

5.

Move the cursor with the arrow keys to where you want to change the number.

6.

Enter the new number or clear the display with C L R .

7.

Press Y E S .

Changing a Name in Your Phone Book

1.

Clear the display.

2.

Scroll to Phone book , Y E S , Edit , Y E S , Find name .

3.

Enter the name and press Y E S .

4.

Press L E F T to move the cursor between the rows.

5.

Change the name by entering or erasing letters.

6.

Press Y E S .

COPYING PHONE NUMBERS BETWEEN MEMORIES

If you want to change SIM card or phone, it is a good idea to copy your phone book from the SIM card to the phone memory or vice versa. Then you can

26 Your Personal Phone Book

Copy card

From start position: 12

Copy card

To start position: 15

Sveinn

Copy to

12

15?

easily copy the phone book back to the memory of your choice. Also, as you fill up the phone book memories, you might want to move entries from one memory to another.

Copying a Number from SIM Memory to Phone Memory

1.

Scroll to Phone book , Y E S , Copy , Y E S , Card r Phone , Y E S .

2.

Enter the number of the first memory position in the SIM memory you want to copy to the phone memory and press Y E S .

3.

Enter the number of the first memory position in the phone memory you want to copy to and press Y E S .

4.

Press Y E S to copy.

The next position in the SIM memory is displayed and the first empty position in the phone memory is suggested.

5.

To continue copying, press one of the following:

• Y E S to copy.

• N O to go to the next position in the SIM memory.

• C L R to copy to another position in the phone memory. Enter the number of the position and press Y E S .

• Arrow keys to move between positions in the SIM memory.

Interrupting Copying

• Press C L R twice.

Copying a Number from Phone Memory to SIM Memory

Follow the instructions in “Copying a Number from SIM Memory to Phone

Memory”, but chose the

Phone r Card option in the Phone book menu instead of

Card r Phone .

Copying All Numbers from SIM Memory to Phone Memory

1.

Scroll to Phone book , Y E S , Copy all , Y E S , Card r Phone , Y E S .

2.

Enter the number of the first position in the SIM memory you wish to copy to the phone memory and press Y E S .

3.

Enter the number of the first position in the phone memory you wish to copy to and press Y E S .

4.

Press Y E S to start copying.

Copying All Numbers from Phone Memory to SIM Memory

Follow the instructions in “Copying All Numbers from SIM Memory to

Phone Memory”, but choose the

Phone r Card option in the Phone book menu instead of Card r Phone .

Your Personal Phone Book 27

Using the Call List

26-Dec-93

< Janina >

+234343554

03-Jan-97

<Unknown: 1 >

THE CALL LIST

This chapter describes the Call List function, which is a type of telephone number log or a memory that stores information (time, date, phone number and name) about the last 30 incoming and outgoing calls. Once your list exceeds 30 calls, the oldest one is deleted. You need to activate the Call List function before any calls are stored in the list.

The numbers that you have dialled are always stored. If your subscription includes the Calling Line Identification (CLI) service and the caller’s network sends the number, you will find the number (together with a name if stored in your phone book) of an incoming call in the Call List. You can call any of the stored numbers. The following icons appear in the display together with the name and number.

The Call List stores:

Answered calls icon appears next to the date or time of answered calls

Missed calls icon appears next to the date or time of missed calls

Dialled numbers icon appears next to the date or time of a dialled number

All the calls are stored together in a chronological order. If the same number is called more than once, the latest call replaces earlier ones. If you check a call within 24 hours, the time of the call is displayed. Otherwise, the time is replaced by the date. You can toggle between date and time by pressing *.

If no information about the caller’s number was received, the display shows

Unknown , which means that no information was available, your subscription does not support CLI, or the caller does not allow the number to be shown.

Note!

If you change SIM cards or deactivate the Call List, it is cleared.

Dialled numbers remain in the SIM card memory though.

28 Using the Call List

NETWORK

Calls:1

Activating the Call List Function

• Scroll to Settings , Y E S , Call List , Y E S , On , Y E S .

Calling a Number from the Call List

1.

Scroll to Info , Y E S , Call List , Y E S .

2.

Scroll to the number that you want to call.

3.

Press Y E S to make the call.

Missed Calls

If you have missed a call, the phone shows Calls: 1 , where the number 1 indicates the number of unanswered/missed calls.

• Press Y E S to go directly to the call list.

Erasing a Number from the Call List

1.

When information about a call appears, press C L R .

Erase?

appears.

2.

Press Y E S .

Shortcut To the Call List

• Press Y E S when the phone is in standby mode.

You can now scroll within the list and make a call by pressing Y E S .

Turning the Call List Memory Off

• Scroll to Settings , Y E S , Call List , Y E S , Off , Y E S .

Note!

If you turn the Call List off, all stored entries are erased.

Using the Call List 29

Your Voice Mail Service

NETWORK

Check?

Note!

Not all operators have this service. The service also depends on your subscription.

The answering service of your network allows callers to leave a voice message when you cannot answer your calls. When you receive a voice message, you hear a signal and the message Check?

appears in the display, together with the voice mail indicator. The indicator light on the top of the phone flashes green. If you have entered the number of your voice mail service, see below, or the SIM card contains the number, you can press Y E S to listen to the voice message. To read the message later, Press N O .

Note!

All network do not inform you of a voice mail in the way described above. Instead, they send a text message (SMS) asking you to call their answering service.

ENTERING THE NUMBER OF YOUR VOICE MAIL

SERVICE

1.

Scroll to Mail , Y E S , Options , Y E S , Set voice M.

, Y E S , New number , Y E S .

2.

Enter the number of your voice mail service and press Y E S to store it.

Note!

If the SIM card already contains the number of your operator’s voice mail service, you do not have to enter it.

ACTIVATING YOUR VOICE MAIL FUNCTION

• Scroll to Mail , Y E S , Options , Y E S , Set voice M.

, Y E S , On , Y E S .

CALLING YOUR VOICE MAIL NUMBER

• Scroll to Mail , Y E S , Voice mail , Y E S

• or press and hold down the 1 key when the phone is in standby.

CHANGING YOUR VOICE MAIL NUMBER

1.

Scroll to Mail , Y E S , Options , Y E S , Set voice M.

, Y E S , New number , Y E S .

2.

Enter your new voice mail number and press Y E S .

CANCELLING YOUR VOICE MAIL FUNCTION

• Scroll to Mail , Y E S , Options , Y E S , Set voice M.

, Y E S , Off , Y E S .

30 Your Voice Mail Service

Personalizing

Your Phone

Menu

< Ring level >

( nnnnnn )

Ring level

< 0 nnnnnn ^>

Settings

< Ring type >

<

Ring type

Phone >

(Mix)

Your phone includes a number of functions which let you adapt your phone to your own personal needs in different situations. Note that some of the functions allow you to have one setting when the phone is handheld and another

when it is connected to handsfree equipment. See “Calling from Your Car” on page 65.

RING SIGNAL VOLUME

You can set the volume in six steps. The first step means that two clicks will be heard when you receive a call. You can also turn the ring signal off (0), or choose a ring signal that rises in steps from the softest volume to the loudest.

To set the ring signal volume

1.

Scroll to Ring level , Y E S .

The ring signal volume appears in the display.

2.

Use R I G H T to increase the volume, L E F T to decrease it.

The phone rings once with the actual setting as you increase the volume, except for the Step (^) setting.

3.

Press Y E S to save the setting.

Tip!

Use the volume keys on the side of the phone to change the volume of the ring signal silently.

RING SIGNAL TYPE

You can choose the type of ring signal from a list of different sounds and melodies. You can also compose up to four melodies of your own by entering

notes with the keypad (see “Your Own Ring Signals” on page 32).

To choose one of the ring signal types

1.

Scroll to Settings , Y E S , Ring type , Y E S , Phone , Y E S .

2.

Scroll until you find the ring signal type that you want.

If you do not wish to disturb other people, use the volume keys on the side of the phone to scroll silently.

3.

When you reach the ring type you want, select it by pressing Y E S .

Personalizing Your Phone 31

<

Ring type

Line 1

(Mix)

>

Personal

<No:_

Personal

Tommy/Mobil

Own 3

B

32

Different Ring Signals for Line 1 and Line 2

If you subscribe to the Alternate Line Service (ALS), L1 or L2 , depending on the line in use, is displayed instead of Phone.

This means that you can set different ring signals for the two lines.

Different Ring Signals for Speech, Data and Fax Calls

If you have turned the Data menus

on (see “Sending and Receiving Faxes and

Data” on page 73), you can set different ring signals for speech (the display

shows Phone , L1 or L2 ), fax and data calls respectively.

Personal Ring Signals

If your subscription includes the Calling Line Identification (CLI) service, you can assign a personal ring signal to up to ten callers. In other words, you can have one ring signal that corresponds to your home phone number, one to your office, etc.

If the last seven digits of a caller’s number correspond to a number you have specified, then that caller’s ring signal is used.

You can include Question marks (?) in a phone number. For example,

012345??? means that calls from phone numbers between 012345000 and

012345999 will have the same personal ring signal. To enter a ?, press # .

To specify a caller’s number and the accompanying ring signal

1.

Scroll to Settings , Y E S , Ring type , Y E S , Personal , Y E S , Add new?

, Y E S .

2.

Enter the caller’s number and then press Y E S .

If a phone number is stored in the phone book, press L E F T to recall the number.

3.

Scroll to ring signal type you want and then press Y E S .

To erase a caller’s number

1.

Scroll to Settings , Y E S , Ring type , Y E S , Personal , Y E S , Erase?

, Y E S .

2.

Scroll to the number you wish to erase and then press Y E S .

YOUR OWN RING SIGNALS

You can compose four ring signals.

To compose a ring signal

1.

Scroll to Settings , Y E S , Edit melody , Y E S .

2.

Select Own 1 , Own 2 , Own 3 or Own 4 .

3.

Press and hold C L R to clear the display.

4.

Use the keypad to enter notes.

The keypad now works as a keyboard (see figure in margin):

• Press and hold a key to enter a long note.

Personalizing Your Phone

<

Settings

Vibrate

(0n when silent)

>

Settings

< Min minder >

(Off)

Settings

< Mail alert >

(Tone)

Settings

< Key sound >

(Click)

• Press 0 to raise the note one octave.

5.

To listen to your melody, press Y E S .

6.

Press Y E S again to save it or press N O to continue editing.

VIBRATING UNIT

You can set the phone´s vibrating unit to Off, On all the time, or On when the ring signal is turned off.

To set the vibrating unit

1.

Scroll to Settings , Y E S , Vibrate , Y E S .

2.

Select the desired setting.

MINUTE MINDER

If you turn on the minute minder, you hear a beep once every minute during a call.

To turn the minute minder on/off

1.

Scroll to Settings , Y E S , Min minder , Y E S .

2.

Select On or Off .

MESSAGE SIGNAL

You can choose whether to hear clicks, tones or nothing (silent) when you receive a text (SMS) or voice message.

To set the message signal

1.

Scroll to Settings , Y E S , Mail alert , Y E S .

2.

Select the sound you wish to hear.

KEY SOUND

You can choose whether to hear clicks, tones or nothing (silent) when you press the keys.

To set the key sound

1.

Scroll to Settings , Y E S , Key sound , Y E S .

2.

Select the key sound you want.

Note!

The sound of the volume keys on the side of the phone is also affected.

However, the only sound that is available is the click sound.

DISPLAY LIGHT

You can set the display light to automatic, off or on. In automatic mode, the display light is turned off automatically 10 seconds after you pressed the last key. It comes on again when you press a key, open the flip, or when you receive a call or message

Personalizing Your Phone 33

<

Settings

Light

(Auto)

>

Settings

< Language >

(Auto)

<

Settings

Greeting >

(Off)

34

To set the display light

1.

Scroll to Settings , Y E S , Light , Y E S .

2.

Select the display light setting you want.

DISPLAY LANGUAGE

Most modern SIM cards automatically set the display language to the language of the country where you bought your SIM card. If this is not the case, the default language is English.

To change the display language

1.

Scroll to Settings , Y E S , Language , Y E S .

2.

Select the language you want.

Note!

If by accident you end up with your phone displaying a language you do not understand, you can return to English by pressing C L R , L E F T , 0 0 0 0 ,

R I G H T .

GREETING TEXT

When you turn on your phone, the Ericsson logotype or your service provider’s name appears in the display. Instead of this, you can write your own greeting. The greeting will be stored on your SIM card.

To write your own greeting

1.

Scroll to Settings , Y E S , Greeting , Y E S , New text , Y E S .

2.

Write your new greeting, using the number keys. For information on how

to enter letters and other characters , see “Your Personal Phone Book” on page 22.

The maximum number of characters is SIM-dependent. However, different characters occupy different space, so the number of characters that the phone can display varies. Fore example, an M occupies more space than an I.

3.

Press Y E S to confirm your setting.

To turn your own greeting on/off

1.

Scroll to Settings , Y E S , Greeting , Y E S .

2.

Select On or Off .

If you turn your own greeting off, the original greeting reappears.

PHONE NUMBER DISPLAY

You can have your phone number displayed when you turn the phone on. This requires that you have replaced the original greeting with a greeting text of your own. If your phone number cannot be retrieved from your SIM card, you have to enter it yourself.

Personalizing Your Phone

Settings

< Phone no >

( )

Settings

< Clock/Date >

Settings

< Clock/Date >

Settings

< Auto Store >

(Off)

To enter your phone number

1.

Scroll to Settings , Y E S , Phone no , Y E S , Phone no , Y E S .

2.

Enter the number and then press Y E S .

Tip!

If your SIM card allows it, you can also enter your fax and/or data number. Scroll to Settings , Y E S , Phone no , Y E S . Then scroll to Fax no or Data no ,

Y E S . Enter the number and then press Y E S .

TIME

The time is always displayed when the phone is in standby mode.

To set the time format

1.

Scroll to Settings , Y E S , Clock/Date , Y E S , Set clock , Y E S .

2.

Select the 24-hour or 12-hour (am/pm) clock.

To set the clock

3.

Enter the time in hours and minutes.

If you selected the 12-hour clock, you can alternate between am and pm by pressing #.

4.

Press Y E S .

DATE

When the phone is in standby mode, you can press a volume key to see today’s date.

To set the date format

1.

Scroll to Settings , Y E S , Clock/Date , Y E S , Set date , Y E S .

2.

Select the date format you want.

To set the date

3.

Enter the year (two digits) and then press Y E S .

4.

Enter the month and day in the same way.

AUTO STORE

You can choose to let the phone ask you if you want to store a called or incoming phone number that is not stored in your phone book. The phone then asks

Store?

when the call ended.

To turn the function on /off

1.

Scroll to Settings , Y E S , Auto Store , Y E S .

2.

Select On or Off .

Personalizing Your Phone 35

<

Settings

Master reset

>

RESET

You can reset some settings to their default values. If you do so, the following settings are affected:

• all settings in the Settings menu, except your own ring signal melodies,

• the ring signal volume,

• the earpiece volume and the handsfree speaker volume,

• the alarm function in the Tools menu is turned off,

• the Area info in the Mail menu is turned off.

To reset the phone

1.

Scroll to Settings , Y E S , Master reset , Y E S .

2.

Enter the phone lock code (the default code is 0000 ) and press Y E S .

36 Personalizing Your Phone

Sending and Receiving

Text Messages (SMS)

NewMessage

Read now?

New

12:15

From: 123456

The Short Message Service (SMS) allows you to send and receive text messages consisting of up to 160 characters.

You can receive text messages when the phone is in standby mode, during a call or when incoming calls are diverted to another phone number.

If your SIM card does not contain the phone number to your network service centre, you must specify the number yourself. Otherwise you cannot reply to

messages received or send your own messages. See “Enabling the Phone to

Send SMS” on page 38.

Note!

The Short Message Service may not be available on all networks. Some network operators may only allow SMS to be sent within their own network.

RECEIVING A MESSAGE

When you receive a message, you hear a signal and the display indicates that you have a new message. The indicator light on the top of the phone rapidly flashes green.

Note!

All networks do not send an audible signal.

To read the message now

1.

Press Y E S when you see the Read now?

prompt.

The display shows the status of the message ( New ) and when it was received. If your network supports Calling Line Identification, the sender’s number is displayed. If the sender’s number and name is stored in the phone book, his or her name is shown instead.

2.

Press Y E S and scroll through the message using the arrow keys.

R I G H T takes you forwards and L E F T takes you backwards through the message.

To go to the end of the message, press and hold R I G H T .

The prompt Reply?

appears after the last line of the message. If the sender wants you to reply, the displayed message will read Requested reply Reply?

provided that your network supports this. See “Replying to a Message” on page 38.

Sending and Receiving Text Messages (SMS) 37

Network

12:15

New

12:15

From: 123456

Options

< Serv cent >

(1234567)

< New >

To read the message later

• Press NO when you see the Read now?

prompt.

The message is stored in the message memory as New and the envelope icon appears at the bottom of the standby display.

READING A STORED MESSAGE

1.

Scroll to Mail , Y E S , Read messages , Y E S .

2.

Scroll to the message you are looking for.

New means an unread message.

Old means a read message.

Sent means a message that you have sent yourself.

To Send means a message you have written, but not sent.

If a message is stored on the SIM card, it is identified by a SIM Card icon.

3.

Press Y E S .

4.

Read the message as described in “Receiving a Message” on page 37.

To call a phone number found in a message

• Press Y E S when the number is displayed.

ENABLING THE PHONE TO SEND SMS

If you want to send or reply to a message, you need to make sure that the service centre number is set. Most modern SIM cards already contain this information at the time of purchase. You can obtain the service centre address from your network operator.

To set the service centre address

1.

Scroll to Mail , Y E S , Options , Y E S , Serv cent , Y E S .

2.

If no number appears in the display, enter the number of the service centre, including the international prefix, and press Y E S .

3.

Press C L R to return to standby mode.

Your phone is now ready to send text messages.

REPLYING TO A MESSAGE

1.

Scroll to the end of the message.

The Reply?

prompt appears.

2.

Press Y E S .

Your display now looks like the picture in the margin.

3.

Press Y E S

and proceed as described in “Composing a Text Message” on page 41.

If you do not want to reply

• Press N O at the Reply?

prompt.

38 Sending and Receiving Text Messages (SMS)

Network

12:15

ERASING A MESSAGE

1.

Scroll to the end of the message.

The Reply?

prompt appears.

2.

Press N O .

The message Erase?

appears.

3.

To erase the message from the message memory, press Y E S .

The next message automatically appears in the message list.

Tip!

You can press and hold C L R anywhere within the menu that handles your message to erase it. When Erase?

appears, press Y E S .

STORING INCOMING MESSAGES

If you do not want to read an incoming message at once, it is automatically stored in the message memory in the phone. This allows you to read it later. If there are any unread messages in the message memory, the envelope icon appears at the bottom of the standby display. The message is stored in the message memory as New .

The message memory can hold up to 10 messages. When all memory positions are full, the oldest read message is overwritten when a new message is received.

If the message memory becomes full with unread messages, new messages are automatically stored in the SIM card memory. If the SIM card memory becomes full, the envelope icon starts flashing.

Messages remain in the message memory until you erase them (see “Erasing a

Message” on page 39), until you insert a different SIM card, or until the tele-

phone needs the memory space to store new messages.

The SIM Card Memory

You can store important messages in a memory on your SIM card. This means that you can find them no matter which phone you use. Messages that are saved in the SIM card memory remain there until you erase them. The maximum number that you can store depends on your SIM card.

If the SIM card memory becomes full, the envelope icon starts flashing. The text Not stored Mem full appears. You will have to erase one or more messages, before you can store any new messages in the SIM card memory.

Sending and Receiving Text Messages (SMS) 39

Stored on card

3(15)

40

Storing a received message in the SIM card memory

1.

Scroll to the end of the message.

The Reply?

prompt appears.

2.

Press N O .

The Erase?

prompt appears.

3.

Press N O .

The Store?

prompt appears.

4.

Press Y E S .

The message automatically moves from the message memory to the SIM card memory.

The display now shows the position of the message. For example, if it is the third of fifteen that the phone can store.

Tip!

You can also store messages you have composed yourself on the SIM

card. See “Own messages” on page 42.

ENHANCING YOUR TEXT MESSAGES

Before you send your message, you can set the type of message, the duration of repetitions, and if you want to have a reply to your messages.

Message type

Your phone can send other types of messages. Your network operator’s service centre may offer the facility to convert a text message into a format

(e-mail, fax, telex, etc.) that suits the equipment that is going to receive the message. Check with your network operator to find out which message types you can use and how.

To change message types

1.

Scroll to Mail , Y E S , Options , Y E S , Msg type , Y E S .

2.

Scroll to the format that you want and press Y E S .

Repetition of Message

If your message cannot be delivered because the receiver is not within reach of a network, you can instruct your Service Centre to repeat the message for a certain length of time.

To set repetition of a message

1.

Scroll to Mail , Y E S , Options , Y E S , Valid per , Y E S .

2.

Scroll to the time span that you want and press Y E S .

Reply to Messages

Sometimes you may want the receiver of your message to reply. If so, you need to set the request reply prompt.

Sending and Receiving Text Messages (SMS)

_

Options

< Reply Req >

(Off)

To set the request reply prompt

• Scroll to Mail , Y E S , Options , Y E S , Reply Req , Y E S .

COMPOSING A TEXT MESSAGE

For more information on how to enter text, see “Your Personal Phone Book” on page 22.

Checking the First Characters You Have Entered

• Press L E F T until you reach the characters you want to view.

Editing the Written Text

• Scroll through the message text with the arrow keys and erase characters to the left of the cursor using C L R , or insert characters above the cursor.

• Press 1 to insert a space.

• To go to the end of the message, press and hold R I G H T .

Note!

If there is a pause of more than 120 seconds between entering characters, the message is stored and the phone returns to the standby menu.

SENDING A NEW TEXT MESSAGE

1.

Scroll to Mail , Y E S , Send message , Y E S , New , Y E S .

An empty display appears.

2.

Enter your message. (See “Composing a Text Message” on page 41).

3.

When you have completed your message, press Y E S .

You are now prompted to enter the receiver’s phone number.

To send the message immediately

4.

Enter the receiver’s phone number or recall it from the phone book. To access the Phone book menu, press L E F T . Scroll through the phone book using the R I G H T and L E F T key.

5.

Press Y E S .

To store the message for later use

• Instead of entering a phone number, press N O . The message is now stored in the message memory. The message is labelled To send instead of Sent .

Note!

The same procedure is used with all types of messages, for example e-mail or fax. Check with your network operator to find out which message types you can use. You have to change the message type first .

ed

SENDING A STORED MESSAGE

1.

Scroll to Mail , Y E S , Send message , Y E S .

2.

Scroll to the stored message you wish to send and press Y E S .

3.

Now you can edit your message. When you are finished, press Y E S .

Sending and Receiving Text Messages (SMS) 41

Send message

Own

< Messages >

4.

Enter the receiver’s phone number (or recall it from the phone book).

5.

To send the message, press Y E S .

OWN MESSAGES

You can store up to ten standard messages, to be re-used whenever you want.

The messages must not exceed 30 characters.

Creating an Own Message

1.

Scroll to Mail , Y E S , Send message , Y E S , Own messages , Y E S .

2.

Scroll to the end of the message list. The phone prompts: New .

3.

Press Y E S .

4.

Enter the message, see “Composing a Text Message” on page 41, and

press Y E S . The phone prompts Store?

.

5.

Press Y E S .

Sending an Own Message

1.

Scroll to Mail , Y E S , Send message , Y E S , Own Messages , Y E S .

2.

Scroll to the message you wish to send and press Y E S .

3.

Press Y E S

to send the message, see “Sending a New Text Message” on page 41.

Deleting an Own Message

1.

Scroll to the message you wish to delete, then press and hold C L R .

The phone asks Delete Own 1?

.

2.

Press Y E S .

42 Sending and Receiving Text Messages (SMS)

AREA INFORMATION

The ordinary Short Message Service is a personal service that carries your private messages. Area Information (AI) is a text message which is broadcast to all subscribers in a certain network cell at the same time. For example, the information may be a local road report or a local taxi phone number.

Note!

This feature may not be available on all networks.

Turning Area Information On

• Scroll to Mail , Y E S , Options , Y E S , Area info , Y E S , On , Y E S .

Turning Area Information Off

• Scroll to Mail , Y E S , Options , Y E S , Area info , Y E S , Off , Y E S .

Area Information Message Types

Each type of Area Information message is identified by a three-digit code. At present, the following message types exist:

054

056

057

058

059

034

040

050

052

022

024

030

032

Code:

000

010

020

AI Message Type:

Index

News flashes

Hospitals

Doctors

Pharmacy

Long-distance road reports

Local road reports

Taxis

Weather

District (base station identity)

Network information

Operator services

Directory enquiries (national)

Directory enquiries (international)

Customer care (national)

Customer care (international)

Note!

These codes are operator dependent. For information about the AI services you can use, please refer to the information supplied by your network operator.

Sending and Receiving Text Messages (SMS) 43

Area Information Message List

You can decide which types of area information messages you wish to receive.

The number of area codes that can be stored depends on the size of the SIM card’s Area Info list. If the SIM card does not have an area info list, the phone itself will store up to 32 codes.

To insert an area information code

1.

Scroll to Mail , Y E S , Options , Y E S , Area info , Y E S , Edit list , Y E S .

The number to the left indicates the position in the list. You can scroll forwards and backwards through the list with the arrow keys.

2.

To insert a code, scroll to the first empty position, using the arrow keys and press Y E S .

3.

Enter the new code. (You only need to enter 40 for 040, since the phone adds the leading zero automatically.)

To erase or replace a code

1.

Scroll to Mail , Y E S , Options , Y E S , Area info , Y E S , Edit list , Y E S .

2.

Scroll to the code you wish to erase/replace and press Y E S .

3.

To erase, scroll to Erase?

and press Y E S .

To replace, scroll to Chg code?

and press Y E S . Enter the new code and press Y E S .

Receiving an Area Message

When you receive Area information, the message is stored in the phone memory. Provided Area info is turned on, you can read the messages via the

Area messages function in the Mail menu.

To read an area message

1.

Scroll to Mail , Y E S , Area messages , Y E S .

2.

Scroll from one message to another.

3.

To select a message, press Y E S .

Note!

The phone only stores one message per code. This means that the message stored previously in a specific code will be overwritten.

44 Sending and Receiving Text Messages (SMS)

Diverting Incoming Calls

All calls

< Activate >

All calls

< Get status >

If you want to make certain that your incoming calls are correctly handled when you are unable to answer them, you can use the Call Divert service to divert them to another phone number.

Note!

The Call Divert service may not be available on all networks.

The Call Divert service lets you:

• divert calls if you are already on the phone, On busy .

• divert calls that you do not answer within a specified time limit (operator dependent), No reply .

• divert calls if your phone is turned off or if you are unreachable,

Unreachabl e.

You may use any combination of the above.

You may also:

• divert all incoming calls, All calls . A divert indicator in the shape of an arrow is shown in the display. If you activate the All calls divert, all other diverts become temporarily inactive. They are activated again when you cancel the All calls divert.

Tip!

If you subscribe to the Alternate Line Service (ALS), you can set different

Call Diverts for the two lines, i.e. Line 1 and Line 2.

ACTIVATING CALL DIVERTS

1.

Scroll to Divert , Y E S .

2.

Select the divert you want ( All calls , On busy , No reply or Unreachable ).

3.

Select Activate .

4.

Enter the phone number, including the area code, to which you want your calls to be diverted and then press Y E S .

Tip!

If the phone number is stored in the phone book, you do not need to enter it. Press L E F T and then recall the number.

CHECKING THE DIVERT STATUS

To check the status of a certain call divert

1.

Scroll to Divert , Y E S .

2.

Select the divert you want.

Diverting Incoming Calls 45

Divert

< Check all >

<

No reply

Cancel >

Divert

< Cancel all >

3.

Select Get status .

The message Please wait appears, followed by a message which informs you whether the call divert is activated or not.

To check the status of all call diverts

• Scroll to Divert , Y E S , Check all , Y E S .

The message Please wait appears, followed by information about all call diverts, i.e. whether they are activated or not.

CANCELLING CALL DIVERTS

To cancel a certain call divert

1.

Scroll to Divert , Y E S .

2.

Select the divert you want.

3.

Select Cancel .

The message Please wait appears, followed by a message which informs you that the call divert has been cancelled.

To cancel all call diverts

• Scroll to Divert , Y E S , Cancel all , Y E S .

The message Please wait appears, followed by a message which informs you that all call diverts have been cancelled.

DIVERTING FAX CALLS

If you have turned the Data menus on (see “Activating the Data Menus” on page 73), you can set call diverts for your phone calls and fax calls individu-

ally.

For fax numbers, there are only two divert alternatives:

• All calls

• Unanswered (includes On busy , No reply and Unreachable ).

46 Diverting Incoming Calls

Security for Your Phone and Subscription

NETWORK

11:33

Settings

< Keylock >

(Off)

There are several ways to protect your phone and subscription from unauthorized use. Anything from a simple keypad lock to full phone number control.

KEYPAD LOCK

The Keypad Lock helps you to avoid accidental dialling, which can happen if you keep your phone in your pocket. An icon in the shape of a key in the display informs you that the keypad is locked.

The keypad lock is automatic. This means that if you do not press a key within

25 seconds, the keypad is locked.

Note!

Calls to the international emergency number 112 can be made when the keypad is locked. If the phone alarm rings, you can turn it off by pressing any key.

The keypad remains locked until you:

• answer an incoming call

• replace the battery

• unlock the keypad

Note!

The keylock is always disabled if the phone is connected to vehicle handsfree equipment.

To activate the automatic keylock

• Scroll to Settings , Y E S , Keylock , Y E S , Auto , Y E S .

To cancel the automatic keylock

• Scroll to Settings , Y E S , Keylock , Y E S , Off , Y E S .

Unlocking the keypad

• Press L E F T followed by Y E S .

Security for Your Phone and Subscription 47

PIN

Blocked.

Unblock?

Enter old PIN

THE SIM CARD LOCK

The SIM card lock only protects your subscription and not your phone itself from unauthorized use. If you change SIM card, the phone still works with the new SIM card.

Some SIM cards are protected with a PIN (Personal Identity Number) at the time of purchase. If the SIM card lock is activated, you have to enter the PIN every time you turn on your phone. If you enter your PIN incorrectly three times in a row, the SIM card is blocked. This is indicated by the message

PIN Blocked. Unblock?

If this happens you need to unlock it to access your subscription.

Unblocking Your SIM Card

1.

Press Y E S .

2.

Enter your PUK (or PUK2) which you will find in the information from your network operator.

3.

Enter a new four- to eight-digit PIN (or PIN2).

4.

Press Y E S .

5.

Re-enter the new PIN (or PIN2) to confirm.

6.

Press Y E S .

Note!

If you enter the wrong PUK ten times in a row, your card is permanently blocked. If this happens, you should contact your network operator.

Changing PIN

1.

Scroll to Access , Y E S , Card Lock , Y E S , Change PIN code , Y E S .

2.

Enter your old (current) PIN and press Y E S .

3.

Enter your new PIN and press Y E S .

The phone asks you to repeat the PIN.

4.

Enter your new PIN a second time and press Y E S .

The PIN is now changed.

Note!

If the message Matching error appears, this means you entered the new

PIN incorrectly. If the message Wrong PIN appears, followed by Enter Old PIN , you entered your old PIN incorrectly.

Changing PIN 2

1.

Scroll to Access , Y E S , Card Lock , Y E S , Change PIN2 code , Y E S .

2.

Follow the same procedure as described in “Changing PIN” above.

48 Security for Your Phone and Subscription

Activating the SIM Card Lock

1.

Scroll to Access , Y E S , Card Lock , Y E S , Lock card , Y E S .

2.

Enter your PIN and press Y E S .

The message Locked confirms that the card lock is now activated.

Cancelling the SIM Card Lock

1.

Scroll to Access , Y E S , Card Lock , Y E S , Unlock card , Y E S .

2.

Enter your PIN and press Y E S .

The message Unlocked confirms that the card lock is now cancelled.

Note!

This only works if your SIM card allows you to cancel the card lock.

PHONE LOCK

The phone lock protects the phone against unauthorized use if it is stolen. It is not activated when you buy the phone. You can change the default security code 0000 to any three- to eight-digit personalized code.

Warning!

Do not use the emergency numbers 112 or 999 as your security code. If you do, you will not be able to unlock the phone. Instead, a call will be made to the emergency number.

The phone lock security code is also used to reset the phone (master reset).

See “Reset” on page 36

The phone lock has two levels: Full Lock and Autolock.

Full Lock

If the Full Lock is activated, you briefly see the message Phone locked , each time you turn on the phone. The message is followed by the prompt

Enter lock code . You then have to enter your code followed by Y E S to use it.

Autolock

If the Autolock is activated, the message Phone locked and the prompt Enter lock code do not appear until a different SIM card is inserted in the phone. After the security code has been entered correctly, the phone can be used with the new

SIM card. You are not asked to enter the security code until the original SIM card or a different SIM card is inserted.

To change the security code

1.

Scroll to Access , Y E S , Phone lock , Y E S , Change code , Y E S .

2.

Follow the steps described in “Changing PIN” on page 48.

Security for Your Phone and Subscription 49

Access

< Phone lock >

(Unlocked)

Auto locked

Barring

< All outgoing > calls

To activate/cancel the phone lock

1.

Scroll to Access , Y E S , Phone lock , Y E S .

The current setting is shown in brackets.

2.

Select the setting you want.

3.

Enter the security code and press Y E S .

The new lock status is displayed.

CALL BARRING

The Call Barring service allows you to bar different types of outgoing and incoming calls.

Note!

This service may not be available in all networks or may require a separate subscription.

The following calls can be barred:

• all outgoing calls

• all outgoing international calls

• all outgoing international calls except to your home country

• all incoming calls

• all incoming calls when you are abroad (when roaming)

To make sure that a call bar is not changed by someone else, you need a

password, which comes with your subscription, to activate or cancel a call bar. You can change the password as often as you like

Changing the Call Barring Status

1.

Scroll to Access , Y E S , Barring , Y E S .

2.

Scroll to the option you want and press Y E S .

You have three options:

• Activate sets a call bar

• Get status lets you check the status of a call bar

• Cancel cancels the call bar

3.

Confirm your selection by pressing Y E S .

4.

Enter your password and press Y E S .

The message Please wait appears, followed by a message which informs you whether the call bar is activated or not.

Note!

If you divert incoming calls (see “Diverting Incoming Calls” on page 45), you cannot activate some barring options. Likewise, if you bar calls,

you cannot activate some call divert options.

50 Security for Your Phone and Subscription

Barring

< Cancel all >

<

Barring

Change > password

Access

< Fixed dial >

Cancelling All Call Bars

1.

Scroll to Access , Y E S , Barring , Y E S , Cancel all , Y E S .

2.

Enter your password and press Y E S .

The message Please wait appears, followed by a message confirming that all call bars are cancelled.

Changing the Password

1.

Scroll to Access , Y E S , Barring , Y E S , Change password , Y E S .

2.

Enter the old (current) password and press Y E S .

3.

Enter the new password and press Y E S .

4.

Enter the new password a second time and press Y E S .

The message Please wait appears, followed by a message confirming that the password has been changed.

FIXED DIALLING

Fixed Dialling is a way of restricting outgoing calls. It requires a SIM card that allows fixed numbers to be stored. The fixed numbers are protected by your PIN2. How many numbers you can store depends on your SIM card.

The Fixed Dialling function allows calls to be made only to fixed numbers stored on the SIM card. If an attempt is made to call other numbers, the message Number not permitted appears in the display.

It is possible to store partial numbers, for example an area code, or an area code followed by the first digits common to several numbers. Storing

0123456 allows calls to be made to numbers from 012345600 to 012345699.

Numbers beginning with the international prefix (+) and country code can also be stored, allowing you to make calls abroad.

Numbers which include question marks can be stored. For example, storing

0123456?0 allows calls to be made to numbers from 012345600 to

012345690. To enter a question mark, press and hold #.

The Fixed Dialling function does not prohibit calls to the international emergency number 112 and the Service Centre of your network operator.

Network services such as Call Divert and Call Barring cannot be used.

Activating Fixed Dialling

1.

Scroll to Access , Y E S , Fixed dial , Y E S .

2.

Enter your PIN2 and press Y E S .

3.

Select On .

Security for Your Phone and Subscription 51

Closed calls

< Select grp >

Closed calls

< Open calls >

Cancelling Fixed Dialling

1.

Scroll to Access , Y E S , Fixed dial , Y E S .

2.

Enter your PIN2 and press Y E S .

3.

Select Off .

Storing Fixed Numbers

1.

Scroll to Phone book , Y E S , Fixed numbers , Y E S , Store , Y E S .

2.

Enter your PIN2 and press Y E S .

3.

Enter the name (optional) and the fixed number in the same way as when storing an ordinary phone number.

Editing a Stored Fixed Number

1.

Scroll to Phone book , Y E S , Fixed numbers , Y E S , Edit , Y E S .

2.

After you enter your PIN2, you can change the position number, the name or the fixed number in the same way as with an ordinary phone number.

Deleting a Stored Fixed Number

1.

Scroll to Phone book , Y E S , Fixed numbers , Y E S , Edit , Y E S .

2.

Scroll to the fixed number you want to delete.

3.

Press and hold C L R .

4.

Enter your PIN2 and press Y E S .

Erase?

appears.

5.

Press Y E S .

CLOSED USER GROUPS

The Closed User Groups (CUG) function is a way of lowering call costs. It depends entirely on your operator and subscription. Not all networks support the function.

You can place your most frequently called numbers in groups. On some networks it is cheaper to make calls within a call group. You can also make sure that certain groups can only be called from work, home etc. This also makes it difficult for somebody else to use your phone for international calls.

You can have a maximum of 10 groups.

Selecting a User Group

1.

Scroll to Access , Y E S , Closed calls , Y E S , Select grp , Y E S .

2.

Select the group you want.

Calls can only be made within the selected user group.

Calling Outside Closed User Groups

You can decide whether outgoing calls to a non-CUG number are allowed.

1.

Scroll to Access , Y E S , Closed calls , Y E S , Open calls , Y E S .

2.

Select Allowed or Not Allowed .

52 Security for Your Phone and Subscription

Edit 3

< Add new? _ >

Erase

< Family

Erase?

2

>

Adding a Name to the CUG List

1.

Scroll to Access , Y E S , Closed calls , Y E S , Edit list , Y E S .

2.

Scroll to the group that you want to edit and press Y E S .

3.

Scroll to an empty position. The phone asks you Add new?

. Press Y E S .

4.

Enter a name. See “Your Personal Phone Book” on page 22.

5.

Press Y E S .

Erasing a Position from the CUG List

1.

Scroll to Access , Y E S , Closed calls , Y E S , Edit list , Y E S .

2.

Scroll to the group that you want to edit and press Y E S .

3.

Scroll to the position that you want to erase and press C L R .

4.

The phone asks you Erase?

.

5.

Press Y E S .

Security for Your Phone and Subscription 53

Handling More than One

Call Simultaneously

Call waiting

< Activate >

<

Call waiting

Cancel >

Call waiting

< Get status >

1 on hold

Your phone allows you to handle more than one call simultaneously. This means that you can put a call that is in progress on hold, while you make or answer a second call, and then switch between the two calls.

You may also set up a Conference Call to have a joint conversation with up to five people. You may put an individual or a group of conference members on hold while you add other people to the conference call. You may also put conference members on hold while you talk to someone privately. See

“Conference Calls” on page 56.

CALL WAITING SERVICE

If you wish to be able to receive a second call, while another call is in progress, you must activate the Call Waiting service.

Note!

The Call Waiting service may not be available in all networks.

To activate the Call Waiting service

• Scroll to Access , Y E S , Call Waiting , Y E S , Activate , Y E S .

There may be a short delay before the network responds. In the meantime, the message Please wait is displayed. This is followed by the message

Call Waiting ON .

To cancel the Call Waiting service

• Scroll to Access , Y E S , Call Waiting , Y E S , Cancel , Y E S .

To check whether the Call Waiting service is activated or not

• Scroll to Access , Y E S , Call Waiting , Y E S , Get status , Y E S .

MAKING A SECOND CALL WHILE A CALL IS

IN PROGRESS

1.

Put the current call on hold by pressing Y E S .

2.

Enter the number you wish to call and press Y E S .

Tip!

If the phone number is stored in the phone book, you do not need to enter it. Press L E F T twice and then recall the number.

54 Handling More than One Call Simultaneously

< Answer?

>

1 on hold

< Busy?

>

Release and

< answer?

>

Handle calls

Release

< active?

>

Handle calls

Release

< all calls?

>

RECEIVING A SECOND CALL WHILE A CALL IS

IN PROGRESS

If the Call Waiting service is activated, you will hear a tone in the earpiece if you receive a second call. The question Answer?

appears in the display.

You can do one of the following:

Put the Current Call On Hold and Answer the Waiting Call

• Press Y E S .

The message 1 on hold appears.

Continue the Current Call and Reject the Waiting Call

• Press N O .

You can also:

1.

Press L E F T .

The question Busy?

appears.

2.

Press Y E S .

The waiting call is rejected. If the caller’s network supports it, the caller will hear a busy tone.

Note!

If Divert On busy is activated, the waiting call is diverted to the number you have specified.

End the Current Call and Answer the Waiting Call

1.

Press L E F T repeatedly until the question Release and answer?

appears.

2.

Press Y E S .

WHEN ONE CALL IS ACTIVE AND ONE CALL IS

ON HOLD

When you have one active call and one on hold, you can do one of the following:

Switch between the Two Calls

• Press Y E S .

End the Active Call and Return to the Call On hold

1.

Press L E F T followed by Y E S to select the Handle calls menu.

2.

Scroll to Release active?

and then press Y E S .

End Both Calls

1.

Press L E F T followed by Y E S to select the Handle calls menu.

2.

Scroll to Release all calls?

and then press Y E S .

Handling More than One Call Simultaneously 55

<

Handle calls

Transfer call?

>

<

Handle calls

Join calls?

>

Release and

< answer?

>

< Busy?

>

<

Handle calls

Join > calls?

12 Conf

56

Connect the Two Calls (Call Transfer)

1.

Press L E F T followed by Y E S to select the Handle calls menu.

2.

Scroll to Transfer call?

and then press Y E S .

The two calls are now connected to each other, and you are disconnected from both calls.

Note!

The Call Transfer service may not be available on all networks.

Join the Two calls into a Conference Call

1.

Press L E F T followed by Y E S to select the Handle calls menu.

2.

Scroll to Join calls?

and then press Y E S .

See “Conference Calls” on page 56.

RECEIVING A THIRD CALL

If the Call Waiting service is activated, you may receive a third call when you have one active call and a second call on hold. You hear a tone in the earpiece and the question Release and answer?

appears in the display.

You can do one of the following:

End the Current Call and Accept the Waiting Call

• Press Y E S .

The waiting call becomes active and the call on hold remains on hold.

Reject the Waiting Call

• Scroll to Busy?

using L E F T and then press Y E S .

The third call is rejected. Provided the caller’s network supports this function, the caller will hear a busy tone.

Note!

If Divert On busy is activated, the waiting call is diverted to the number you have specified.

CONFERENCE CALLS

Note!

The Conference Call service may not be available on all networks.

Creating a Conference Call

To create a conference call, you must have one active call and one call on hold.

1.

Press L E F T followed by Y E S to select the Handle calls menu.

2.

To join the two calls into a conference call

Scroll to Join calls?

and then press Y E S .

Adding New Participants to the Conference Group

You can put the conference group on hold and then add new participants.

Handling More than One Call Simultaneously

Conf held

<

Handle calls

Join > calls?

Handle Calls

< Conference > participants

Conf parts

<1:

Anderson

>

<

Handle calls

Extract?

>

01234567890

<

Handle calls

Join > calls?

Handle calls

< Release?

>

01234567890

Conf held

To add a new participant

1.

Press Y E S to put the conference group on hold.

2.

Call the third person you wish to include in the conference group.

3.

Press L E F T followed by Y E S to select the Handle calls menu.

4.

Scroll to Join calls?

and then press Y E S .

You can include up to five participants in the conference group by repeating steps 1 to 4 above.

To review the participants in the conference group

1.

Press L E F T followed by Y E S to select the Handle calls menu.

2.

Scroll to Conference participants and then press Y E S .

3.

The first participant’s phone number is displayed. If the participant’s number and name is stored in the phone book, the name is displayed instead.

4.

Scroll with R I G H T to see the other participants’ numbers (names).

Having a Private Conversation with One of the Participants

If you wish to have a private conversation with one of the participants, you can extract that participant from the conference and put the other participants on hold.

To extract a participant

1.

Press L E F T followed by Y E S to select the Handle calls menu.

2.

Scroll to the participant you wish to extract and then press Y E S .

To rejoin the participant to the conference group

1.

Press L E F T followed by Y E S to select the Handle calls menu.

2.

Scroll to Join calls?

and then press Y E S .

Releasing Participants from the Conference Group

You can release participants from the conference group, one by one.

To release a participant

1.

Press L E F T followed by Y E S to select the Handle calls menu.

2.

Scroll to the participant you wish to release and then press Y E S .

Making a Call while a Conference Call Is in Progress

You can put the conference group on hold and make another call. You can then switch between the new call and the conference call.

To make the call

1.

To put the conference group on hold, press Y E S .

2.

Enter the number you wish to call and press Y E S .

Handling More than One Call Simultaneously 57

Handle calls

< Release > active?

To switch between the new call and the conference group

• Press Y E S .

To end the new call and return to the conference group

1.

Put the conference group on hold.

2.

Press L E F T followed by Y E S to select the Handle calls menu.

3.

Scroll to Release active?

and then press Y E S .

Ending the Conference Call

• Close the flip or press N O .

58 Handling More than One Call Simultaneously

Setting Network

Preferences

Menu

< Networks >

SEARCHING FOR NETWORKS

When you turn on the phone, it searches for the last accessed network. If this is not within range, you may use another network, provided your home network has an agreement that allows you to do so. This is called roaming.

The order of preference in which the phone selects a network is determined by a list of preferred networks on your SIM card.

The Networks menu includes a number of functions that let you determine how the phone searches for a network. You may also select a network yourself from those within range.

SELECTING A NEW NETWORK

1.

Scroll to Networks , Y E S , Select net , Y E S .

2.

The message Please Wait is displayed briefly. The display then shows either:

• the name of a network, followed by the message Current , Preferred ,

Available or Forbidden . For an explanation of the message, see the table below.

Instead of the full name of a country and a network, an abbreviation is displayed. To see the full name of a network, press *.

• the message No network . There is no network within range.

3.

If there is more than one network within range, you can scroll through the network names and choose the network you want by pressing Y E S .

Message

Current

Home

Preferred

Meaning

The network is currently being used.

Your home network is within range. You can select it.

The name of the network is included in a list of preferred networks on your SIM card. You can select this network.

Setting Network Preferences 59

Networks

< New search >

Message

Forbidden

Available

Meaning

The name of the network is included in a list of forbidden networks on your SIM card. You can

normally not select this network. See “List of

Forbidden Networks” below.

The name of the network is not included in the preferred or forbidden list on your SIM card. You can select this network, but you might not be able to use it.

Starting an Automatic Network Search

• Scroll to Networks , Y E S , New search , Y E S .

The phone automatically starts searching for a network according to the list of preferred networks stored on your SIM card.

LIST OF FORBIDDEN NETWORKS

The names of the forbidden networks are stored on your SIM card. If such a forbidden network is within range, it is left out when the phone searches for a network (automatic search mode).

If your home network and a forbidden network come to an agreement that allows you to use the forbidden network, you can select this network even though the message Forbidden is displayed.

LIST OF PREFERRED NETWORKS

You can create a list that defines in which order your phone will select a network during automatic network selection, when your home network is not within range.

The number of networks that can be stored in the list depends on your

SIM card.

The Edit list function lets you review the networks in the list. Apart from rearranging the order of the networks, you can add new networks to the list and delete networks from it.

Reviewing the List of Networks

1.

Scroll to Networks , Y E S , Edit list , Y E S .

2.

The name of the first network is displayed.

3.

Scroll through the networks in the list.

Tip!

To see a network’s full name, press *.

60 Setting Network Preferences

<

Edit list

Network

1 >

Edit list

Add net?

6

<

Edit list

Network

1 >

Edit list

Network

New pos:

4

_

Networks

< Search mode >

(Manual)

Adding a Network to the List

1.

Scroll to Networks , Y E S , Edit list , Y E S .

2.

Scroll to the first free position in the list and press Y E S .

The Add net?

prompt appears.

If you scroll to a position that is already occupied, press Y E S and then scroll with the arrow keys until Add net?

appears.

3.

Press Y E S and scroll with the arrow keys until you find the network that you want. If the desired network does not appear, press Y E S when the question Other?

appears.

4.

Enter the three-digit country number and the two-digit network number.

5.

Press Y E S to add the network to the list.

Erasing a Network from the List

1.

Scroll to Networks , Y E S , Edit list , Y E S .

2.

Scroll to the network you wish to erase and press Y E S .

3.

Scroll to Erase , Y E S .

Re-arranging the List

1.

Scroll to Networks , Y E S , Edit list , Y E S .

2.

Scroll to the network you wish to move and press Y E S .

Move is displayed.

3.

Press Y E S and enter the new position within the list.

SEARCH MODES

When you turn on your phone, it searches for a network. This can be done in two different ways, depending on the search mode that is activated. Automatic search mode is usually the default.

Automatic search mode means that your phone searches for the last accessed network first. If this is not available, it automatically searches for another available network within range.

Manual search mode means that your phone searches for the last accessed network first. If this is not available, the question Select net?

appears.

Select a network as described in “Selecting a New Network” on page 59.

Activating Automatic Search Mode

• Scroll to Networks , Y E S , Search mode , Y E S , Auto , Y E S .

Activating Manual Search Mode

• Scroll to Networks , Y E S , Search mode , Y E S , Manual , Y E S .

Setting Network Preferences 61

Knowing the Call Time/

Call Cost

Settings

< Call info >

(Time: Outg.)

Info

< Last call >

3:40

<

Info

Tot calls >

48:16

CALL INFORMATION

The display shows the duration of a call in progress. When you end the call, the call duration information is shown for another five seconds. If your network and SIM card support this feature, you can have the call cost (or the number of call units) displayed.

To select the call information you want

1.

Scroll to Settings , Y E S , Call info , Y E S .

2.

Select Time: Outg , Time: All or Cost .

TIME OR COST OF THE LAST CALL

To check the time/cost of the last call

1.

Scroll to Info , Y E S , Last call .

2.

Depending on the setting in the Call info function in the Settings menu, you can now check:

• how long your last call was ( Time: Outg or Time: All )

• the cost (or the number of call units) of the last call ( Cost )

TOTAL CALL TIME OR CALL COST

To check the total call time or call cost

1.

Scroll to Info , Y E S , Tot calls .

2.

Depending on the setting in the Call info function in the Settings menu, you can check:

• the total time of all outgoing calls ( Time: Outg )

• the total time of all calls ( Time: All )

• the cost (or the number of call units) of all calls ( Cost )

To reset the total call time/cost counter

• Scroll to Info , Y E S , Tot calls , Y E S , Reset?

, Y E S .

Note!

If you have chosen the call cost option, you must enter your PIN2 to reset the counter.

62 Knowing the Call Time/Call Cost

<

Info

Price

Units

>

<

Info

Credit

Unlimited

>

DETERMINING THE CALL COST

If you select the Cost option in the Call info function in the Settings menu, the

Price function appears in the Info menu. However, to be able to use the Price function, both your network and your SIM card must support it.

The Price function lets you enter and vary the price per call unit. The price entered is stored on your SIM card.

Note!

If you do not specify a price per call unit, the number of call units will be displayed during a call, and in the Last call and Tot calls functions.

To enter the price per call unit

1.

Scroll to Info , Y E S , Price , Y E S , New price , Y E S .

2.

Enter the code for the currency you want, for example GBP or £ for pound sterling, and then press Y E S .

3.

Enter the price per call unit, for example 0.75, and press Y E S . To enter the decimal point, press #.

4.

Enter your PIN2 and then press Y E S . (The PIN2 prompt may not appear in some networks.)

To revert to call units

1.

Scroll to Info , Y E S , Price , Y E S , Units , Y E S .

2.

Enter your PIN2 and then press Y E S .

CREDIT LIMIT FOR CALLS

If both your network and SIM card support this feature, you can enter a total amount of money that can be used for making calls. This could be useful when you lend your phone to someone, for example, and do not want their call costs to exceed an amount specified by you. After a call is made, the cost is deducted from this amount. When the amount reaches zero, no more calls can be made.

To set the credit limit

1.

Scroll to Info , Y E S , Credit , Y E S , New credit , Y E S .

2.

Enter the amount, for example 30 pounds, and then press Y E S .

3.

Enter your PIN2 and then press Y E S .

Knowing the Call Time/Call Cost 63

Using Two Voice Lines

NETWORK

11:33

Note!

This service may not be available on all networks and may require a separate subscription.

Your phone supports two voice lines (Alternate Line Service, ALS) with different phone numbers, Line 1 and Line 2. This is useful if you want to keep business calls and private calls on separate lines. You can only send and receive text messages (SMS) on Line 1.

The line currently selected is indicated in the display with a line indicator and the digit 1 or 2.

CHANGING TO THE OTHER LINE

• Scroll to Change to Line 1 , Y E S , or

• scroll to Change to Line 2 , Y E S .

From now on, all outgoing calls are made on the line you just selected.

Receiving a Call on One of the Lines

When someone calls you, the question Answer?

is replaced by Line 1?

or Line 2?

depending on which line the person is calling.

DIFFERENT SETTINGS FOR EACH LINE

You can personalize the names of the two lines. You can also have different settings for each line, for example: the tone of the ring signal and call diverts.

You set these functions separately when the line is activated. The call meters in the Info menu show the call times (call costs) for the line currently selected.

Changing the Name of a Line

1.

Scroll to Settings , Y E S , Line 1 Tag (or Line 2 Tag ), Y E S .

2.

Enter a new name, using the number keys. For information on how to enter

letters and other characters, see “Your Personal Phone Book” on page 22.

The maximum number of characters is SIM-dependent. However, different characters occupy different space, so the number of characters that the phone can display varies.

3.

Press Y E S .

64 Using Two Voice Lines

Calling from Your Car

By using the Ericsson portable or vehicle handsfree solutions, you can be on the phone without using your hands to hold it.

HANDSFREE TYPES

If you use a Vehicle Handsfree Solution, you can choose between two different ways in which your phone can handle the speech. This is done in the

Handsfree sub-menu.

Handsfree Type 1

Handsfree Type 1 means that the phone handles the call in semi-duplex mode.

This means that you cannot speak at the same time as the person at the other end of the line. Use this alternative only if Type 2 does not work properly.

Handsfree Type 2

Handsfree Type 2 means that the phone handles the call in full duplex mode.

This considerably increases the quality of speech, since you do not have to wait until it is your turn to speak, and the speech becomes clearer.

For Handsfree Type 2 to work properly, your phone adapts to the sound environment around the handsfree equipment. This adaptation might take a few calls. During this learning phase, the person you are talking to might hear an echo of his or her own voice (because the sound goes from the speaker into the microphone again). However, this disappears as the other person speaks.

If the echo lasts longer than the first few calls, try Handsfree Type 1 instead.

Setting the Handsfree Type

1.

Scroll to Settings , Y E S , Handsfree , Y E S .

2.

Select the type you want.

Note!

More sophisticated Vehicle Handsfree solutions automatically provide full duplex. They also disable the choice between Handsfree Type 1 and 2, since the choice becomes superfluous when using this kind of equipment; you always get the best quality of speech possible.

ANSWERING MODE

The sub-menu Answering mode includes two functions: Any key and Auto , which are useful when you use the phone with handsfree equipment.

Calling from Your Car 65

• Any key : If you use the phone with handsfree equipment and this function is turned on, you can answer an incoming call by pressing any key, except the N O key and the volume keys.

• Auto : If you choose the automatic answering mode, an incoming call is answered automatically after one ring signal.

Selecting Answering Mode

1.

Scroll to Settings , Y E S , Answering mode , Y E S .

2.

Select a mode.

OTHER HANDSFREE-RELATED SETTINGS

Apart from the settings mentioned above, you can change the following settings when using handsfree equipment:

• Ring level

• Ear volume

• Ring type (only with car kit)

• Display light

Each of these settings can be specified separately when you have your phone connected to handsfree equipment. This means that if you make one of these settings when the phone is connected to handsfree equipment, the settings when it is handheld are not affected and vice versa.

Changing a Setting

1.

Connect the phone to the handsfree equipment.

2.

Change the setting according to the instructions in “Personalizing

Your Phone” on page 31.

66 Calling from Your Car

Voice Recognition

Voice dial

Please say voice label after tone

The phone is equipped with an in-built voice recognition system. This system allows you to:

• voice dial.

• answer and reject calls.

To call someone, you only need to press a key, say the voice label associated with that person and the phone automatically dials his or her number. To answer and reject calls, you only need to say for example “Answer” and

“Busy”.

ABOUT VOICE LABELS

A voice label can be explained as a voice pattern connected to an entry in your phone book.

Voice labels must be distinct, for example “Answer” and “Busy”.

Tip!

Best performance is obtained by holding the phone as you would do when in a call, that is with the phone up to your ear with the flip down, and in a silent environment.

RECORDING VOICE DIALLING LABELS

You can record (save) a voice label together with a name and number in your phone book. The voice label and the name do not have to match. That is, you can store a number with the name “Home” (that is what you see in the display when searching for a number in your phone book), but your voice label might be “Jenny”.

Note!

Your phone can hold up to 10 different voice labels.

To activate the Voice Dialling function

• Scroll to Settings , Y E S , Voice dial , Y E S , On , Y E S .

To record a voice label

1.

Follow the steps 1–4 of “Storing a Number Together with a Name” on page 23.

2.

Press Y E S at the Record voice label now?

prompt.

You are prompted to speak after a tone (beep).

Voice Recognition 67

68

3.

Say the voice label that you want to be stored with the phone book entry.

The voice label is played back to you.

4.

If you are satisfied, press Y E S to store the voice label. Otherwise, press

N O and then repeat steps 2 and 3.

The voice label icon appears next to the position number.

Recording Problems

If the phone could not detect any speech, one of the following might have happened:

• the name of the voice label was too short.

• the background noise of your recording location was too loud.

• you spoke too softly.

Try to change one of these factors and go back to step 2 of “To record a voice label” on page 67.

ADDING A VOICE DIALLING LABEL TO AN ALREADY

STORED NUMBER

1.

Scroll to Phone book , Y E S , Edit , Y E S , Find name .

2.

Enter the name you want to add a voice label to and press Y E S .

The name and number is displayed.

3.

Press Y E S

.

After a short while, Record voice label now?

is displayed.

4.

Press Y E S

. Then follow the instructions from step 3 in “To record a voice label” on page 67.

REPLACING A VOICE DIALLING LABEL

1.

Scroll to Phone book , Y E S , Edit , Y E S , Find name .

2.

Enter the name with the voice label you want to replace and press Y E S .

The name and number is displayed.

3.

Press YES .

After a short while, Replace voice label is displayed.

4.

Press Y E S

. Then follow the instructions from step 3 in “To record a voice label” on page 67.

ERASING A VOICE DIALLING LABEL

1.

Scroll to Phone book , Y E S , Edit , Y E S , Find name .

2.

Enter the name with the voice label you want to erase and press Y E S .

The name and number is displayed.

3.

Press YES .

After a short while, Replace voice label is displayed.

4.

Press R I G H T .

Erase voice label is displayed.

Voice Recognition

Voice Ans

Please say voice label after tone

5.

Press Y E S to erase the voice label.

VOICE LABEL LIST

If the Voice Dialling function is on, the Phone Book menu includes a Voice

Label List. When selected, you can scroll through the names and numbers which have a voice label attached. When such a number is displayed, its voice label is played back. You can call the number by pressing Y E S .

To select the Voice Label List

• Scroll to Phone book , YES , Voice label list , YES .

USING VOICE DIALLING

Once you have recorded your voice labels and the Voice Dialling function is on, you can start using the Voice Dialling system.

To make a call when the phone is hand held

1.

Open the flip.

2.

Clear the display using C L R .

3.

Press and hold the Y E S key, or the press the upper V O L U M E key briefly

4.

Say the voice label after the prompt.

To make a call when the phone is used with handsfree equipment

1.

Press the upper V O L U M E key briefly.

2.

Say the voice label after the prompt.

RECORDING THE VOICE ANSWERING LABELS

The words that you choose to accept and reject calls can be any word in any language. Just try to make the words as different from each other as possible and not too short. In the example below, we have chosen the commands

“Answer” to accept and “Busy” to reject incoming calls. See also “About

Voice Labels” on page 67.

The first time you turn the phone’s Voice Commander on, you are asked to train it. You start the training by saying a command (voice label) for accepting, then you continue with a command for rejecting.

To activate and train the voice commander (first time)

1.

Scroll to Settings , Y E S , Voice ans , Y E S , On , Y E S .

2.

The question Record ANSWER voice label appears.

3.

Press Y E S .

You start by training the voice commander to recognize the command for accepting calls.

Voice Recognition 69

4.

Say the command you want to use.

The command is played back to you.

5.

If you are satisfied, press Y E S to save the command (voice label).

Otherwise, press N O and then repeat steps 3–5.

The phone now prompts you to enter a voice command for rejecting calls. To do this, follow steps 3–5 above using “Busy” (or another command) instead of

“Answer”. Just make sure that you have two different words for accepting or rejecting.

REPLACING THE VOICE ANSWERING LABELS

1.

Scroll to Settings , Y E S , Voice ans , Y E S , Replace voice label , Y E S .

2.

The question Replace ANSWER voice label appears.

3.

Follow the description from step 3 in “Recording the Voice Answering

Labels” on page 69.

USING VOICE ANSWERING

When the phone is handheld, the flip must be open. To answer the call when the phone rings, say the voice label you have recorded for answering, for example “Answer". To reject the call, say the voice label you have recorded for rejecting, for example “Busy”.

I you use the phone with handsfree equipment, portable or car kit, it does not matter whether the flip is open or closed. Speak into the microphone to answer or reject the incoming call.

70 Voice Recognition

Calling Card or Credit

Card Calls

Access

< Call cards > security

<

Security

Change code >

When making international or long distance calls, you may not want your operator to charge you for these calls on your normal account. If you have a credit card or a calling card, you may want to re-direct the charges to one of those accounts instead. Your phone is all set for making this procedure as easy as possible for you.

ACTIVATING THE CALLING CARD FEATURE

1.

Scroll to Access , Y E S , Call cards security , Y E S .

2.

Enter your security code and press Y E S .

The default code is 0000.

3.

Scroll to Call cards , Y E S , On , Y E S .

The Call card function is now activated and the sub-menu Call card numbers is visible in the Phone book menu.

CHANGING SECURITY CODES

1.

Scroll to Access , Y E S , Call cards security , Y E S .

2.

Enter the old security code and press Y E S .

3.

Scroll to Change code , Y E S .

4.

Enter your new code and press Y E S .

The code can consist of four to eight digits.

5.

When Repeat new code appears in the display, confirm your new code.

6.

Press Y E S .

Your security code is now changed.

STORING CREDIT OR CALLING CARD NUMBERS

Your phone allows you to store two calling card numbers in the phone book menu. This sub-menu is only visible if the Call card function is activated in the Access menu.

STORING A CALLING CARD NUMBER

1.

Scroll to Phone book , Y E S , Call card numbers , Y E S .

2.

Enter your security code and press Y E S .

To change security codes, see above.

Calling Card or Credit Card Calls 71

3.

Select card position (Card 1 or Card 2).

4.

Enter the access number (the phone number) to the calling card server. The numbers are entered in the same way as in the ordinary phone book.

5.

Press L E F T or R I G H T .

6.

Enter the verification code to your calling card server.

7.

To store the calling card number, press Y E S .

Changing the dialling order

Since the dialling order (whether you have to dial your verification code before or after the number you want to dial) may vary between calling card servers, you can change the order yourself.

• Use L E F T and R I G H T , when the Called no row flashes.

SELECTING A CARD

If you have stored two card numbers, you must select which card you wish to use before making a Calling/Credit card call.

To select the card

1.

Scroll to Phone book , Y E S , Call card numbers , Y E S .

2.

Enter your security code and press Y E S .

3.

Scroll to the card you wish to use.

Your settings for the card appear. Press Y E S to confirm each setting.

Note!

Once you have selected a card, it remains selected until you select the other card.

MAKING A CREDIT OR CALLING CARD CALL

1.

Enter the phone number of the person you want to call.

2.

Press and hold Y E S .

The access number to the calling card server is called and during the connecting phase, you are prompted to send the called number (the number of the person you want to call) and the verification code, in the order chosen by you (see above).

3.

To send the called number and the verification code during the connecting phase, press Y E S when the display shows Send Called no?

and Send Ver no?

.

Tip!

You can retrieve the number of the person you want to call from the phone book. When you have found the number, press and hold Y E S to make the call.

72 Calling Card or Credit Card Calls

Sending and Receiving

Faxes and Data

Settings

< Data menus >

(Off)

Note!

To be able to use various communications services you need the appropriate accessories and programs.

If you have a SIM card that does not support separate fax and data numbers, you need to activate the data menus. When the Data menus are activated, a new menu appears in your phone: Next call type .

ACTIVATING THE DATA MENUS

• Scroll to Settings , Y E S , Data menus , Y E S , On , Y E S .

NEXT CALL TYPE

This function allows you to decide which type the next incoming call will be, i.e. fax, data, or fax then speech. You will only see this menu if your phone detects that you do not have separate numbers for data, fax and speech. Once you have set your phone for a specific incoming call, it will stay so until you change it back. The normal setting is Speech .

Defining the Next Incoming Call

1.

Scroll to Next call type , Y E S .

2.

Select which type the next incoming call will be.

Sending and Receiving Faxes and Data 73

Some Useful Functions

Edit number

01234567890_

SPECIAL FUNCTIONS MENU

If a phone number is present in the display, you can press R I G H T , followed by

Y E S , to select the Special functions menu. This menu lets you:

• edit the phone number

• insert a p (pause)

• show or hide your phone number when calling somebody

To edit the number in the display

1.

Scroll to Special functions , Y E S , Edit number , Y E S .

2.

Now you can move the cursor with L E F T / R I G H T and insert and delete digits and other characters ( * , # , + and p ).

3.

When you are finished with the corrections, press Y E S to call the number.

If you change your mind and do not wish to call the number, press N O instead.

Hint!

You can edit a phone number that you have stored in your phone book.

When you have found the number using Name recall or Position recall , press N O .

Then select Edit number . Make the necessary corrections and then press Y E S to call the number.

To insert a pause

• Scroll to Special functions , Y E S , Pause , Y E S .

Hiding or Showing Your Phone Number

With most subscriptions, the receiver can see your phone number when you make a call. However, some operators offer subscriptions where your phone number is normally hidden. If you want to change the setting for a particular call, this is possible, provided the network you use supports it.

To hide your phone number when calling somebody

1.

Enter the phone number you wish to call.

2.

Scroll to Special functions , Y E S , Hide Id , Y E S .

To show your phone number when calling somebody

1.

Enter the phone number you wish to call.

2.

Scroll to Special functions , Y E S , Send Id , Y E S .

74 Some Useful Functions

NETWORK

11:33

Tools

< Set alarm >

(Off)

Alarm

07:30

Tools

< Calculator >

CHECK MENU

If you enter more than 20 characters ( 0 – 9 , * , # , + and p ), the first characters disappear from the display. Instead, a left arrow is shown in front of the characters.

To check the first characters

1.

Press R I G H T .

2.

When you are finished, press L E F T .

If you wish to use any of the Special functions, press R I G H T instead.

ALARM CLOCK

The phone has an alarm function. When it is activated, an icon in the shape of a bell is shown next to the current time in the display.

The alarm signal sounds at the time set, even if the phone is turned off. The illumination of the keys and the display flashes. The volume of the alarm signal depends on the setting of the ring signal.

The alarm signal will sound for 60 seconds and will be repeated every nine minutes, if you do not turn it off. After 60 minutes, the repeat function will be turned off automatically.

To set the time of the alarm

1.

Scroll to Tools , Y E S , Set alarm , Y E S .

2.

Enter the time in hours and minutes.

If you have selected the 12-hour format in the Clock/Date function in the

Settings menu, you can alternate between am and pm by pressing # .

3.

Press Y E S .

To turn the alarm signal off

1.

Press any key to turn the alarm signal off when it sounds.

2.

If you do not want the alarm to be repeated, press Y E S .

To turn the alarm function off

• Scroll to Tools , Y E S , Set alarm , Y E S , Off , Y E S .

CALCULATOR

The phone's in-built calculator can add, subtract, divide and multiply.

Using the Calculator

In this example we are going to divide 134 by 32.

1.

Scroll to Tools , Y E S , Calculator , Y E S .

2.

Enter 134.

Some Useful Functions 75

3.

Scroll with R I G H T / L E F T to the division sign (/) and press Y E S .

4.

Enter 32.

5.

Scroll with the R I G H T / L E F T to the equal sign (=) and press Y E S .

You can also press # to get the answer.

6.

To clear the display, press C L R .

To enter a decimal point

• Press *.

To enter the multiplication sign (*)

• Press * twice.

76 Some Useful Functions

ADDITIONAL INFORMATION

Troubleshooting 78

Quick Keys 80

Technical Data 81

Glossary 82

Guidelines for Safe and Efficient Use 86

Warranty 90

Declaration of Conformity 92

Index 93

Troubleshooting

Insert card

112 only

16:21

No network

Wrong

PIN

Matching error

PIN

Blocked.

Unblock?

BLOCKED

Contact card provider

Phone locked

78

This chapter lists some problems that you might encounter while using your phone. Some problems require that you call your service provider, but most of the problems you encounter are easy to correct yourself.

ERROR MESSAGES

Insert card

There is no SIM card in the phone. Insert a SIM card. See “The SIM Card” on page 5.

112 only

If the message 112 only is displayed, you are within range of a network but you are not allowed to use it. However, in an emergency, some operators allow

you to call the international emergency number 112. See “Making Emergency

Calls” on page 15.

No network

There is no network within range or the received signal is too weak. You have to move to get a signal that is strong enough.

Wrong PIN, Wrong PIN2

You entered your PIN or PIN2 incorrectly.

• Enter the correct PIN or PIN2, and press Y E S .

Matching error

When you want to change a security code (for example PIN) you have to confirm the new code by entering it again. The two codes that you have entered

do not match. See “The SIM Card Lock” on page 48.

PIN/PIN2 Blocked. Unblock?

You entered your PIN or PIN2 incorrectly three times in a row. To unblock see

“The SIM Card Lock” on page 48.

BLOCKED Contact card provider

You entered your personal unblocking key (PUK) incorrectly 10 times in a row. Contact your network provider or service operator.

Phone locked

The phone is locked. To unlock the phone, see “Phone Lock” on page 49.

Troubleshooting

Enter lock code

Number not permitted

Enter lock code

Your phone comes with the default security code, 0000. You can change it to

any three- to eight-digit personalized code. See “Phone Lock” on page 49.

Number not permitted

The Closed User Groups function is activated and the number you have

dialled is not part of a group. See “Closed User Groups” on page 52.

PHONE DOES NOT COME ON

Handheld Phone

• Recharge or replace the battery.

Handsfree Phone in Vehicle

• Make sure that the phone is properly inserted into its holder.

NO INDICATION OF BATTERY CHARGING

If you attach a new battery that is empty, or an old battery that has not been used for a long time, and connect the charger to the phone, it may take a while until the indicator on the top of the phone shows a red light and the battery meter appears.

POOR SOUND QUALITY IN HANDSFREE EQUIPMENT

• Check that the handsfree equipment is Ericsson original equipment and that it has been properly installed,

Change the Handsfree Type from Type 1 to Type 2. See “Handsfree

Types” on page 65.

VOICE ANSWERING DOES NOT PERFORM WELL

Try changing the voice labels for accepting and rejecting calls.

Troubleshooting 79

Quick Keys

Several keys on your phone can be used to optimize the phone’s functionality and decrease the number of times you need to press a key. Some of the key combinations demand that your phone is in a certain mode and some can be made from the standby mode.

The table below describes some of the most useful key combinations.

To… Do this: mute the microphone press and hold C L R quickly access mail voice press and hold the 1 key

Mode: when on the phone when in standby find the first name in the phone book that starts with a certain letter press and hold the corresponding key, for example, the 2 key to find the first name that starts with an A go to the call list reach second letter press Y E S press and hold the upper volume key and press the desired numeric key when in standby when in standby when entering letters reach third letter reject a call speed dial press and hold the lower volume key and press the desired numeric key when entering letters double-click on one volume key or press N O press 1 – 9 and Y E S move three lines forward press 3 when receiving a call when in standby return to beginning of message press and hold L E F T when reading a message when reading a message

80 Quick Keys

Technical Data

General

System

SIM card

Dimensions

Size

Weight with battery

Weight without battery

GSM 900/GSM1800

Small plug-in card, 3V or 5V type

105 x 49 x 24mm

146g

81g

Ambient temperatures

Max

Min

+55°C

–10°C

Technical Data 81

Glossary

82

Advice of Charge (or AoC) enables you to monitor the cost of calls made from your mobile phone. Details of the last call and total calls made are shown in the phone display.

Alternate Line Service (or ALS) enables you to have two lines and two different phone numbers on one subscription for your mobile phone. This makes it possible to have separate numbers for business and personal calls. To use this service, it must be supported by your network.

Area Information (or AI) is a service that allows you to receive messages about pre-set topics i.e. weather forecasts, road reports, etc. To use this service, it must be supported by your network.

Call Barring enables you to restrict or bar certain or all types of calls to and from your mobile phone, i.e. outgoing calls, outgoing international calls, incoming calls. Barring is activated with a personal code. To use this service, it must be supported by your network.

Calling Line Identification (or CLI) shows the number of the person calling you in your mobile phone display. You can then make an informed choice as to whether or not to take the call. Bear in mind that not all numbers can be displayed. To use this service, it must be supported by your network.

Divert enables you to forward calls to another number, for example your voice mail or home phone.

DTMF or Touch Tone. Dual Tone Multi Frequency signal – codes sent as tone signals. Used for telephone banking, for accessing an answering machine, etc.

Dual Band GSM 900/1800. The Ericsson T18 is a dual band phone, which means that you can use your phone on two different kinds of networks – the

GSM 900 and the GSM 1800 (also called PCN or DCS 1800) systems.

A dual band phone that combines the two standards can use both frequencies.

This increases capacity in densely populated urban areas, and consequently improves the coverage offered by your network operator. It also offers you enhanced international roaming, thanks to the additional networks now availa-

Glossary

ble when you are out travelling.

The switching between the two systems is done automatically and seamlessly, which means that you can use your phone without ever having to consider which system is best at the time. This is taken care of by the networks. However, you should note that the functions offered and the network coverage differ depending on your choice of operator and/or subscription.

Enter. The word “enter” in this manual is used for keying in letters or numbers from the keypad.

Fax Class. Standards for fax transmission are set as classes. Class I and II allow data transfer speeds of between 2400 up to 9600 bps.

Fixed Dialling Numbers enables you to allow only numbers beginning with certain pre-defined figures to be dialled from your mobile phone. The service is activated by PIN2.

Full Duplex in handsfree equipment, means that both parties on the phone can talk at the same time.

GSM 900. GSM is the world's most widely used digital network, now operating in over 100 countries around the world, particularly in Europe and Asia-

Pacific.There are different phases of roll-out for the GSM system and GSM phones are either phase 1 or phase 2 compliant.

GSM 1800 also known as DCS 1800 or PCN, is a digital network working on a frequency of 1800 MHz. It is used in Europe and Asia-Pacific.

International Prefix (+). Mobile phone (+) prefix that automatically adds the correct international code in front of a telephone number when dialling out of a country. You then have to add the code of the country you are calling.

International Roaming a mobile phone feature that allows you to switch between networks offering coverage abroad. Your mobile phone automatically selects a network or system (your home network), but if it is not in range or unavailable, it will select another system. International roaming is based on agreements between network operators in different countries.

Line 1/Line 2. See “Alternate Line Service.

Menu System is the easiest way to access all the phone’s functions. The menus are arranged to be accessed and viewed when scrolling with the arrow keys.

Glossary 83

84

Network. A mobile phone network or system consists of a network of cells. A radio base station serves each cell from where calls are forwarded to and received from your mobile phone by wireless radio signals.

Operator. To be able to use your phone, you need a subscription to a network.

You get this subscription from a network operator, together with a SIM card that you need to use with your phone.

PC-Card. Also called PCMCIA. The PC-card can act as a modem and connect your mobile phone to a laptop or organizer, enabling data and fax transmission. The thin type II card is the most common size. Type III is a thicker card and can house more than modem functionality.

Phone Book. A memory in your mobile phone where phone numbers can be stored and accessed by name (alpha memory search) or position.

PIN. Personal Identification Number – a code used for all GSM-based phones to establish authorization for access to certain functions or information. The

PIN code comes with your subscription.

PIN2. Personal Identification Number 2 – an authorization code which is used only for special services.

PUK. Personal Unblocking Key – used to unlock a blocked SIM card. This comes with your subscription.

Roaming. Within your home network, this means that your mobile phone automatically sets up communication procedures with different radio base stations when on the move.

Scroll. The word “scroll” in this manual means pressing the left or right arrow key to move between the menus.

Select. The word “select” in this manual means scrolling to a menu or function then pressing the Y E S key.

Semi-Duplex. In handsfree equipment, full duplex means that the connection is open for both parties to talk simultaneously. Semi-duplex gives close to, but not complete, duplex functionality.

Service Provider. A company that provides services and subscriptions to mobile phone users.

Short Message Service (or SMS) allows messages of up to 160 characters to be sent and received via the network operator's message centre to your mobile

Glossary

phone. Messages are stored if the phone is off or out of reach ensuring that they reach you. To use this service, it must be supported by your network.

SIM card. Subscriber Identity Module card – a card that must be inserted in any GSM-based mobile phone. It contains subscriber details, security information and memory for a personal directory of numbers. The card can be a small plug-in type or credit card sized but both types have the same functionality.

SMS. See “Short Message Service ”.

Subscription is the contract that you have with the service/network provider.

To use your phone, you need to have a subscription to a network. You get a

SIM (Subscriber Identity Module) card with your subscription. The services included in your subscription depend on your choice of operator and/or subscription. So some of the services and functions described in this manual may not be accessible to you. If you want a complete list of the services included in your subscription, please contact your network operator.

Glossary 85

Guidelines for Safe and Efficient Use

Note!

Read this information before using your portable phone.

GENERAL

Since its introduction in the mid 1980s the portable phone is one of the most exciting and innovative products ever developed. With it, you can stay in contact with your office, your home, emergency services, and others.

Your telephone is a radio transmitter and receiver. When it is ON it receives and also sends out radio frequency (RF) energy. Depending upon the type of mobile phone you have purchased, it operates in different frequency ranges and employs commonly used modulation techniques. When you use your phone, the system handling your call controls the power level at which your phone transmits.

For the safe and efficient operation of your phone, observe these guidelines.

EXPOSURE TO RADIO FREQUENCY ENERGY

The International Commission on Non-Ionizing Radiation Protection

(ICNIRP), sponsored by the World Health Organization (WHO), published a statement in 1996 which sets limits for exposure to RF fields from handheld mobile phone. According to this statement, which is based on the available body of research, there is no evidence that mobile terminals meeting the recommended limits can cause any adverse health effects. All Ericsson telephones conform to the ICNIRP recommendations, and international exposure standards, such as:

• CENELEC European Pre-standard ENV50166-2

• ANSI/IEEE C95.1-1992 (USA, Asia- Pacific)

If you want to limit RF exposure even further, you may choose to control the duration of your calls and operate your phone in the most power efficient manner.

86 Guidelines for Safe and Efficient Use

EFFICIENT PHONE OPERATION

How to use your phone for optimum performance with minimum power consumption:

Hold the phone as you would any other telephone. While speaking directly into the mouthpiece, angle the antenna in a direction up and over your shoulder. If the antenna is extendable, it should be extended during a call.

Do not hold the antenna when the phone is IN USE. Holding the antenna affects call quality, may cause the phone to operate at a higher power level than needed and shorten talk and standby times.

ANTENNA CARE AND REPLACEMENT

Do not use the phone with a damaged antenna. Replace a damaged antenna immediately. Consult your manual to see if you may change the antenna yourself. If so, use only an Ericsson approved antenna. Otherwise, take your phone to a qualified service centre for repair.

Use only the designated Ericsson antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate the appropriate regulations.

Do not use an antenna designed for any other type of portable telephone than the telephone you have purchased.

DRIVING

Check the laws and regulations on the use of telephones in the areas where you drive. Always obey them. Also, when using your phone while driving, please:

• Give full attention to driving.

• Use hands-free operation, if available.

• Pull off the road and park before making or answering a call if driving conditions so require.

RF energy may affect some electronic systems in motor vehicles. In addition, some vehicle manufacturers forbid the use of mobile phones in their vehicles.

Check with your vehicle manufacturer's representative to be sure your phone will not affect the electronic systems of your vehicle.

Guidelines for Safe and Efficient Use 87

ELECTRONIC DEVICES

Most modern electronic equipment, for example, equipment in hospitals and cars, is shielded from RF energy. However, RF energy from telephones may affect some electronic equipment.

Turn your phone OFF in health care facilities when regulations posted in the areas instruct you to do so. Always request permission before using your phone near medical equipment.

Mobile telephones may affect the operation of some implanted cardiac pacemakers, equipment for people with hearing impairments and other medically implanted equipment. Pacemaker patients should be aware that the use of a mobile phone very close to a pacemaker may cause the device to malfunction.

Avoid placing the phone over the pacemaker, i.e. in your breast pocket. When using the phone, place it at your ear opposite the pacemaker. If a distance of

15cm. is kept between the phone and the pacemaker, the risk of interference is limited. Contact your cardiologist for more information.

AIRCRAFT

• Turn your phone OFF before boarding any aircraft.

• Use it on the ground only with crew permission

• Turn off your phone before the aircraft leaves the ground. Do not use it in the air.

To prevent possible interference with aircraft systems, safety regulations require you to have permission from a crew member to use your phone while the plane is on the ground. To prevent interference with communication systems, you must not use your phone while the plane is in the air.

POWER SUPPLY

Connect AC (Power supply) only to designated power sources as marked on the product.

To reduce risk of damage to electric cord, remove from outlet by holding onto

AC adapter rather than cord.

Make sure the cord is located so that it will not be stepped on, tripped over or otherwise subjected to damage or stress.

To reduce risk of electric shock, unplug unit from power source before attempting any cleaning, then use soft cloth dampened on with water.

88 Guidelines for Safe and Efficient Use

CHILDREN

Do not allow children to play with your phone. It is not a toy. Children could hurt themselves or others (by poking themselves or others in the eye with the antenna for example). Children could also damage the phone or make calls that increase your telephone bills.

BLASTING AREAS

To avoid interfering with blasting operations, turn your unit OFF when in a

“blasting area” or in areas posted “turn off two-way radio”. Construction crews often use remote control RF devices to set off explosives.

POTENTIALLY EXPLOSIVE ATMOSPHERES

Turn your phone OFF when in any area with a potentially explosive atmosphere. It is rare, but your phone or its accessories could generate sparks.

Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fuelling areas, such as petrol stations, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders.

Do not transport or store flammable gas, liquid, or explosives in the compartment of your vehicle which contains your phone and accessories.

PRODUCT CARE

• Do not expose product to water or moisture. Example: bathtub, laundry sink, wet/damp basement, swimming pools, etc.

• Do not expose product to extreme temperatures such as found near a hot radiator or stove, or in a car parked in the sun.

• Do not expose product to extreme cold temperatures such as a car parked outdoors in winter.

• Do not expose product to lit candles, cigarettes, cigars, open flames, etc.

Use only Ericsson Original accessories. Failure to do so may result in loss of performance, fire, electric shock, or injury, and will void the warranty.

• Do not attempt to disassemble the product. Doing so will void warranty.

This product does not contain consumer serviceable components. Service should only be performed by Authorized Service Centres.

Guidelines for Safe and Efficient Use 89

Warranty

90

If your Ericsson product requires warranty service you should return the product to the dealer/retailer from whom it was purchased. If your Ericsson product requires warranty service when you are abroad, the service is available in those countries listed on your International Warranty Certificate.

In the event of difficulty, details of our authorized service network are available from your local Ericsson subsidiary.

OUR WARRANTY

Ericsson warrants this product as being free of defects in material, design and workmanship at the time of original purchase and for a period of twelve (12) months immediately thereafter.

WHAT WE WILL DO

If, during the period of the warranty, this product malfunctions in normal use and service due to defective design, materials or workmanship Ericsson will repair or replace, at its discretion, the product under the conditions stated below.

Ericsson subsidiaries, authorised distributors or authorised service centres in the countries listed on your International Warranty Certificate will repair or replace this product in accordance with the terms and conditions stipulated in these conditions of the warranty. Certain products may not be available in certain countries and in this event, a similar product will be delivered.

CONDITIONS

1.

The warranty will be granted only if the original warranty certificate issued to the purchaser by the dealer is presented, and if the said warranty certificate stipulates the electrical serial number of the purchased product and the date of purchase of the product. Ericsson reserves the right to refuse warranty service if this information has been removed or amended after the original purchase of the product. The original receipt/invoice will only be accepted as a proof of purchase when presented to the dealer from whom the product was purchased.

2.

The warranty is not applicable in circumstances other than defects in material, design and workmanship. The warranty does not cover the following:

Warranty

• Periodic checks, maintenance, repair and replacement of parts due to normal wear and tear, exchange of faulty batteries or upgrading of software due to changes in network parameters.

• Damage to the product resulting from:

• Abuse or misuse, including but not limited to failure to use the product for its normal purposes or in accordance with Ericsson’s instructions for use and maintenance of the product, or the installation or use of the product in a manner inconsistent with the technical or safety standards in force.

• Repairs performed by non-authorized service workshops, or opening of the product by non-authorized persons.

• Accidents, acts of God or any cause beyond the control of Ericsson, including but not limited to lightning, water, fire, public disturbances and improper ventilation.

3.

This product will not be considered defective in materials, design or workmanship if it needs to be adapted, changed or adjusted to conform to national or local technical or safety standards in force in any country other than that for which the product was originally designed and manufactured.

This warranty shall not reimburse such adaptations, changes or adjustments, or attempts to do so, whether properly performed or not, nor any damage resulting from them, nor any adaptation, change or adjustment to upgrade the product from its normal purpose as described in the product manual without the prior written consent of Ericsson.

4.

Repair or replacement under the terms of this warranty shall not give a right to an extension to, or a new commencement of, the period of warranty. Repair or replacement under the terms of this warranty may be fulfilled with functionally equivalent reconditioned units. Replaced faulty parts or components will become the property of Ericsson.

5.

This warranty does not affect the purchaser’s statutory rights under applicable national legislation in force, nor the purchaser’s rights against the dealer arising from the sales/purchase contract.

In the absence of applicable national legislation this warranty will be the purchaser’s sole and exclusive remedy. Ericsson, its subsidiaries and distributors shall not be liable for any incidental or consequential damages for breach of any express or implied warranty relating to this product.

Warranty 91

Declaration of Conformity

We, Ericsson Mobile Communications AB of

Nya Vattentornet

221 83 Lund, Sweden declare under our sole responsibility that our product

Ericsson type 110 1001-BV to which this declaration relates, conforms to the appropriate standards

TBR 19, TBR 20, TBR31, TBR32, ETS 300 342-1 and EN 60950, following the provisions of Teleterminals directive 91/263/EEC, EMC directive

89/336/EEC, and Low voltage directive 73/23/EEC.

Stockholm, 1 October, 1999

(Place & date of issue)

Johan Siberg, President

92 Declaration of Conformity

Index

A

Alarm clock 75

Alternate Line Service (ALS) 64

Answered calls indicator 28

Answering calls 15

Answering service. See Voice Mail

Antenna 4

Area information 43 message types 43

receiving area messages 44

B

Banking by phone 24

Barring calls. See Call barring

Battery 4, 6 attaching 6

charging 6, 7, 79

release catch 4

removing 8

Battery charger 7

Battery meter 11

Belt clip

threaded hole 4

C

Calculator 75

Call barring 50

cancelling all 51 changing password 51

changing status 50

Call cost 62 checking 62

setting a credit limit 63 specifying price per unit 63

Call divert 45 activating 45

cancelling 46

checking status 45 divert indicator 11, 45

Call forwarding. See Call divert

Call list 28

activating 29 calling from call list 29

Call restrictions. See Call barring

Call time 62 checking 62

Call waiting 54

Call waiting service

activating 54 cancelling 54

Calling

from call list 29

from phone book 25

Calling cards 71

Calling Line Identification (CLI) 15

Calls

answering 15

ending 14

putting on hold 17, 54, 55, 57

receiving 15

redialling 14

rejecting 15

switching between calls 55

Card memory 22, 24

CB. See Area information

Cell broadcast. See Area information

Changing PIN 48

Check menu 75

Ciphering 16

CLI. See Calling Line Identification

Clock. See Time

Closed user groups 52

Conference calls 56 adding new participants 56 creating 56

extracting a participant 57 releasing a participant 57 reviewing participants 57

Copying phone numbers 27

Credit 63

Credit cards 71

Index 93

94

D

Date 35 format 35 setting 35

Dialled numbers indicator 28

Display 4

greeting text 34

indicators 11

language 9, 34

light 33

Divert indicator 11, 45

Diverting calls. See Call divert

DTMF pauses 74

DTMF tones 18

E

Earpiece 4

volume 17

Emergency calls 15

Ending calls 14

Entering letters 41

Error messages 78

F

Fax, sending and receiving 73

Fixed dialling 51 activating 51

cancelling 52

Fixed numbers 52 editing 52 storing 52

Flip 4, 13, 14, 15, 58

disabling active flip 13

Forbidden networks 60

Forwarding calls. See Call divert

G

Greeting text in the display 34

H

Handsfree usage 65

Hiding your number 74

I

Icons in display. See Indicators in display

Indicator light 4

Indicators in display 11, 28 answered calls 28

battery meter 11

dialled numbers 28

keypad lock 11

line 12

missed calls 28

phone icon 22

signal strength 11 silent ring 11

SMS 11 voice mail 11

International calls 15

International emergency number 15

K

Key functions 12, 80

Key sound 33

Keypad 4

unlocking 47

Keypad lock 47 activating 47 cancelling 47

Keypad lock indicator 11

L

Language in the display 9, 34

Letters, entering 23

Line indicator 12

M

Memory full 25

Menu system 20

Message signal 33

Message types (SMS) 40

Microphone 4

muting 17

Microphone channel 4

Minute minder 33

Missed calls 29

Missed calls indicator 28

Muting microphone 17

Index

N

Name recall 25

Name tag 22

Network 10, 59

forbidden 60 preferred 60

search modes 61

selection 59

Network name 10

P

Pause (DTMF) 24, 74

Personal ring signal 32

Phone book 22

calling from 25

card memory 22

changing a name 26 changing phone number 26

copying 27

erasing phone number 25

keeping up to date 26

phone memory 22

storing names 23 storing numbers 23

Phone icon 22

Phone lock 49

activating/cancelling 50

auto lock 49 changing the security code 49 full lock 49

Phone memory 22, 24

Phone number

displaying own 34

Phone number in SMS

replying to 38

PIN 6, 9

changing 48

PIN2 6

changing 48

Plus sign (+) 15, 22

Position recall 26

Preferred networks 60

PUK 6, 48

Q

Quick dialling. See Speed dialling

Quick keys 80

R

Reading messages (SMS) 37

Receive calls 15

Receiving messages (SMS) 37

Redialling numbers 14

Rejecting calls 15

Request reply (SMS) 40

Resetting phone 36

Restricting calls. See Call barring

Ring signal

choosing 31

composing own 32

level 31

personal 32

type 31

S

Scratch pad 17

Scrolling 12, 20

Sending messages (SMS) 41

Shortcuts. See Quick keys

Showing your number 74

Signal strength meter 11

Silent ring signal 11

SIM card 5 inserting 5

release button 4

removing 5

unblocking 48

SIM card lock

activating 49 cancelling 49

SMS 37

composing 41 editing 41

enabling phone for sending 38

erasing 39

message types 40

reading 37 receiving 37

repeating message 40

reply requested 40

replying to 38

sending 41

storing 39

types 40

SMS indicator 11

Index 95

Special functions menu 74

Speed dialling 26

Stored messages (SMS)

reading 38

Storing

names 23 numbers 23

T

Tape loops. See Voice mail indicator

Telephone banking 24

Text messages (SMS) 37

the 13

Time 35 format 35 setting 35

Tone signals 18

Touch tones 18

Turning the phone on 9

Turning your phone off 10

V

Vibrating unit 33

Voice answering 69

Voice commander

training first time 69

Voice dialling

activating 67

Voice label 67 recording 67

Voice label icon 68

Voice mail 30 activating 30 calling 30

Voice mail indicator 11

Voice recognition 67

Volume

earpiece 17

ring signal 31

Volume keys 4, 12, 15

96 Index

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents