GLIDER ROCKER &
OTTOMAN
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
_____________________________________
Date of purchase:
_______ / _______ / _______
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part.
WARNING
DO NOT leave children unattended on or beside the chair.
DO NOT use your chair as a step stool.
DO NOT sit on the edge of the seat, armrests or on the backrest as this could make the chair tip over.
NOTES
* Ensure that all parts and components are located before beginning assembly.
* Assembly may require two people.
* Assemble on a soft surface to prevent damage to the product finish.
* Read all instructions completely before assembly.
* Phillips head screwdriver is not included
* Do not use power tools.
* CAUTION: Adult assembly required.
* Estimated assembly time: 20 minutes
CARE AND CLEANING
Dust regularly with a soft, dry cloth to prevent soil build up. Keep away from heat to avoid glazing, melting or scorching. Use a professional cleaning service to clean the fabric.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
WARNING: Should this product become damaged, and/or components are broken or missing,
DO NOT USE.
GLIDER ROCKER & OTTOMAN
GLIDER ROCKER & OTTOMAN
STEP 1
Attach back frame (B) to base (A) with hex socket head bolts (1) and spring washers (4).
Use Allen Key (6) to install bolts.
NOTE: Do not fully tighten the bolts. This will make it easier to attach the arms in the following step.
4
1
6
B
A
1 4
GLIDER ROCKER & OTTOMAN
STEP 2
Attach the right arm assembly (FR) to back frame (B) with hex socket head bolt (2), spring washer
(4) and barrel nut (5). Insert the barrel nut (5) into the hole underneath the armrest as per detail A.
Insert the hex socket head bolt (2) with spring washer (4) through the hole in the back frame (B) as per detail A. Use Allen Key (6) to tighten bolts.
Insert barrel nuts (5) into holes in right arm assembly (FR). Insert hex socket head bolts (3) along with spring washers (4) through the base (A) into barrel nuts (5) as per detail B. Use Allen key (6) to tighten bolts.
Repeat this to attach left arm assembly (FL).
NOTE : Do not fully tighten bolts until all bolts have been installed.
DETAIL A
B
5
FR
4
3
6
5
A
FL
4 2
6
4
2 3 5
GLIDER ROCKER & OTTOMAN
STEP 3
Attach the arm cushions (E) to the armrests by buttoning the buttons along with the interior seat and on the sides.
Attach the seat cushion (C) to the base (A).
Attach back cushion (D) to back frame (B).
E
E
A
B
GLIDER ROCKER & OTTOMAN
CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury.
DO NOT leave children unattended on or beside the chair.
DO NOT use the chair as a step stool.
That's it ! You've finished assembling your glider rocker & ottoman.
DO NOT sit on the edge of the seat, armrests or on the backrest as this could cause the chair to tip over.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge.
Customer Service
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
