Advertisement
Advertisement
VIPNX - VIPNXL
WIPER FOR HOUSING
DESCRIPTION
Wiper kit which can be directly installed on the housing body. Brush and body in steel.
Integrates the support for the wash injector coming from the pump. Available for housings in the NXM, NXL series.
MECHANICAL
Wiperblade and enclosure constructed from AISI 316L stainless steel
Dimensions (ØxL): 100x169mm (3.9x6.7in) (not comprehensive of blade)
Unit weight: 1.7kg (3.7lb)
ELECTRICAL
Connector 3+1 pins
Supply voltage/Current consumption:
• 24Vac, 290mA max, 50/60Hz
• 230Vac, 30mA max, 50/60Hz
CERTIFICATIONS
CE listed
IP protection degree (EN60529): IP66, IP67
TECHNICAL DRAWINGS
The indicated measurements are expressed in millimetres.
R170
VIPNX
100 65 104
191
R214
100 65 104
191
VIPNXL
WWW.VIDEOTEC.COM - DATA SHEETS
VIPNX-VIPNXL_EN_2021-03-31
EAC certification
Lloyd's Register Marine Type Approval (certification only valid for the codes: VIPNX1C,
VIPNX2C)
PART NUMBER
VIPNX1C
VIPNX2C
VIPNXL1C
VIPNXL2C
230Vac stainless steel wiper for NXM housing
24Vac stainless steel wiper for NXM housing
230Vac stainless steel wiper for NXL housing
24Vac stainless steel wiper for NXL housing
PACKAGE
Model Number
VIPNX1C
Weight Dimensions (WxHxL)
1.9kg (4.2lb) 14.5x15x27cm (6x6x11in)
Master carton
15
Specifications subject to change without notice. © VIDEOTEC S.p.A. All rights reserved. The mentioned names of products or companies are trademarks or registered trademarks.

Public link updated
The public link to your chat has been updated.
Advertisement