Xfinity Li-ION 20V

Wet & Dry Vacuum skin

Instruction Manual

IMPORTANT

Read carefully before use

Keep for future reference

Cleaner - Skin

• 1 x Wide Nozzle Tool attachment

• 1 x Dusting brush attachment

• 1 x Crevice Tool attachment

• 1 x 1.8m Vacuum hose

• 1 x HEPA filter

• 1 x Instruction Manual

• 1 x Warranty Card

Version number: 003

@

/

2

Welcome

Congratulations in choosing to buy a Workzone® Titanium 20V Wet &

Dry Vacuum (battery / charger not included).

All products bought to you by Workzone® Titanium are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 5 Year Warranty. We hope you will enjoy your purchase for many years to come.

When you open your packaging, first remove all items and check there are no parts damaged or missing. If you find anything wrong, do not operate the product until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

AFTER SALES SUPPORT

1300 889 028 (toll free)

2 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

20V Wet & Dry Vacuum

Warranty Details

REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION

The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. T conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

3

AFTER SALES SUPPORT

1300 889 028 (toll free)

3 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

4

Contents

Application 5

Package Content List

Parts description

Description of symbols

General safety warnings

Important information – Product care

Operation 14

Maintenance 17

Storage and Transportation 19

Warranty 20

Environmental protection 21

Troubleshooting 22

Technical specifications 24

5

6

8

9

10

Assembly 10

AFTER SALES SUPPORT

1300 889 028 (toll free)

4 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

20V Wet & Dry Vacuum

1. Application

First time users or inexperienced operators pay particular attention to the operation of the 20V Wet & Dry Vacuum, including details of starting and stopping and correct use of the 20V Wet & Dry Vacuum on pages 14-16 , as well as the maintenance instructions on pages 17-20.

Intended use of 20V Wet & Dry Vacuum (battery / charger not included)

NOTE: This product is for private domestic DIY use only. It is not suitable for commercial or trade use.

This 20V Wet & Dry Vacuum is suitable for private home use i.e for use with cleaning dirt, debris and liquids from garages, workshops, as well as dust extraction function.

The Wet & Dry Vacuum is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse.

2. Package Content List

• 1 x 20V Li-ion Wet & Dry Vacuum Cleaner

- Skin

• 1 x Wide Nozzle Tool attachment

• 1 x Dusting brush attachment

• 1 x Crevice Tool attachment

• 1 x 1.8m Vacuum hose

• 1 x HEPA filter

• 1 x Instruction Manual

• 1 x Warranty Card

• Remove all packing materials

• Ensure all parts on the contents list are present

• Check the appliance, and all accessories for transportation damages

WARNING!

Please read and understand this instruction manual before use and keep it for your future reference. Your product should only be passed on together with this instruction manual.

WARNING!

To reduce risk of injury, only use ALDI 20V Li-Ion Xfinity

Plus battery packs. Other type of battery packs may burst causing personal injury and damage. The battery pack must be recharged only with an ALDI 20V Li-Ion Xfinity Plus battery charger.

AFTER SALES SUPPORT

1300 889 028 (toll free)

5 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

5

6

3. Parts description

1. Battery pack*

2. Battery pack release button*

3. On-board holder x 2

4. Carry handle

5. Appliance head

6. Tank

7. Side locking latch x 2

8. On/Off switch

9. Hose outlet - Blower

10. Screw

11. Hose outlet - Suction

12. Hose holder

13. HEPA filter (with lock/unlock plug)

14. Dusting brush

15. Crevice tool

16. Wide nozzle tool

17. Body connection

18. 1.8m Heavy-Duty crush resistant vacuum hose

19. Accessories connection

20. Filter basket

21. Safety float valve

22. Battery port

* Battery and charger shown only for illustrative purposes. Battery and

Charger not included with this Wet & Dry Vacuum.

AFTER SALES SUPPORT

1300 889 028 (toll free)

6 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

1 2 3 4

8

7

12 13

1

5

14

6

15

7

16 20

9 10 11

22

17 18

AFTER SALES SUPPORT

1300 889 028 (toll free)

19 21

7 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

8

4. Description of symbols

The instruction manual, rating plate, or on the product itself, may show these symbols. These represent important information about the product or instructions on its use.

Read Operator’s Manual

Warning

Wear ear protection

Wear eye protection

Wear breathing protection

Conforms to relevant standards for electrical safety and electromagnetic compatibility.

60 60 Months Warranty

AFTER SALES SUPPORT

1300 889 028 (toll free)

8 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

5. General safety warning

Product safety

General safety warnings

WARNING: Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Rechargeable batteries are to be removed from the appliance before being charged;

- Batteries are to be inserted with the correct polarity;

- Exhausted batteries are to be removed from the appliance and safely disposed of;

- If the appliance is to be stored unused for a long period, the batteries should be removed;

- The supply terminals are not to be short-circuited.

9

AFTER SALES SUPPORT

1300 889 028 (toll free)

9 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

10

6. Important information – Product care

NOTE: Xfinity Battery and Charger not included. For any issuses related directly to your purchased ALDI Xfinity Battery / charger, contact the Customer Service of the manufacturer as listed on the battery / charger packaging, manual or on the label on the battery / charger.

This 20V Wet & Dry Vacuum uses Lithium Ion Battery Cells. Care

MUST be taken to ensure both the safety and life of the pack is maintained. Ensure you have read all of the safety notes in the previous pages before using the 20V Wet & Dry Vacuum.

Treat the battery pack with care and within the guidelines of this manual.

If the battery pack does become immersed in water or any fluids, or is subject to a severe drop or it does not operate within the guidelines of this manual or the supplied manual, immediately STOP using the battery pack and have it checked.

Use only ALDI Xfinity Plus 20V range of batteries and chargers.

7. Assembly

WARNING! To prevent serious injury from accidental operation, remove the battery pack and make sure that

On/Off switch is in “O” position while undertaking any assembly or maintenance.

7.1 To remove and install the appliance head (5).

To remove:

1) Pull out the bottom of the side locking latch (7) to loosen the locked part of the appliance head (5) from the tank (6) for one side. (See Fig. A1)

Then open the locking hook of the side locking latch (7). (See Fig. A2)

2) Release the other side with the same steps above.

3) Remove the appliance head (5).

To install:

1) Place the appliance head (5) on the tank (6) correctly. (See Fig. A3)

AFTER SALES SUPPORT

1300 889 028 (toll free)

10 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

11

2) Align the side locking latch (7) with the notch on the ridge of the appliance head (5) lip. (See Fig. A4). Then press the side locking latch (7) down to fasten the engaged part to lock the appliance head (5) for one side.(See Fig. A5).

3) Lock the other side with the same steps above.

4) The appliance head (5) is locked on the tank (6) firmly.

A1 A2

A3 A4 A5

7.2 Assembling the hose holder (12)

1) To attach the hose holder (12), firstly remove the assembly screw

(10) by turning it in an anti-clockwise direction using a philips head screwdriver (Not supplied). (See Fig. B1)

2) Align the raised key-shaped part of the hose holder (12) with the caved key-shaped part on the rear bottom of the wet & dry vacuum vacuum. You will feel the two parts engage if done correctly. Insert the screw (10) through the screw hole on the hose holder (12), then through the hole of the key-shaped part on the rear bottom of the

AFTER SALES SUPPORT

1300 889 028 (toll free)

11 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

12 wet & dry vacuum. (See Fig. B2)

3) Tighten the screw (10) using a philips head screwdriver (Not supplied) in a clockwise direction until tight.(See Fig. B3)

B1 B2 B3

7.3

Assembling the accessories for wet & dry vacuuming

To assemble the 1.8m Heavy-Duty crush resistant vacuum hose (18) to hose outlet - suction (11) :

1) Insert the 1.8m Heavy-Duty crush resistant vacuum hose (18) into hose outlet - suction (11) and align the locking pin on the body connection

(17) with the groove on the hose outlet - suction (11). (See Fig. C1)

2) Turn the body connection (17) in a clockwise direction to secure the hose (18) into position. (See Fig. C2)

C1 C2

To assemble the dusting brush (14) / crevice tool (15) / wide nozzle tool (16) to the 1.8m Heavy-Duty crush resistant vacuum hose (18) :

1) For wet & dry vacuuming, either the dusting brush (14) , crevice tool (15) or wide nozzle tool (16) can be added to accessories

AFTER SALES SUPPORT

1300 889 028 (toll free)

12 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

connection (19) by simply inserting them in until they are secure. (See

Fig. C3)

C3

13

7.4 Assembling the accessories for blowing

To assemble the 1.8m Heavy-Duty crush resistant vacuum hose (18) to hose outlet - blower (9) :

1) Insert the 1.8m Heavy-Duty crush resistant vacuum hose (18) into hose outlet - blower (9) and align the locking pin on the body connection (17) with the groove on the hose outlet - blower (9). (See Fig. D1)

2) Turn the 1.8m Heavy-Duty crush resistant vacuum hose (18) in a clockwise direction to secure the hose (18) into position (See Fig. D2)

D1 D2

7.5 To remove or install the battery pack (1) ( not supplied )

Depress the battery pack release button (2) firmly first and then slide the battery pack (1) out from the battery port (22). (See Fig. E1)

AFTER SALES SUPPORT

1300 889 028 (toll free)

13 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

14

Slide the fully charged battery pack (1) onto the battery port (22) with sufficient force until it clicks into position. (See Fig. E2)

E1 E2

1

2

8. Operation

8.1 Switching on and off (See Fig. F)

Switch Position 0: OFF (All operations shut off)

Switch Position I: For normal vacuuming operation (wet or dry)

NOTE: When the maximum filling capacity is reached, switch off the machine immediately. Before opening and emptying, always remove the battery pack (1).

NOTE: Empty the tank into a bin or sink depending on the type of waste. Only dispose of liquid waste into household sinks & drains if safe to do so. Improper disposal of hazardous waste can cause pollution and harm.

F

OFF ON

AFTER SALES SUPPORT

1300 889 028 (toll free)

14 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

8.2 Wet vacuuming & Dry vacuuming

NOTE: Never use the wet and dry vacuum without the HEPA filter installed.

WARNING: This wet and dry vacuum is not suitable for the vacuuming of combustible liquids.

1) Ensure the tank (6) is completely dry and free from dust and dirt.

2) Always ensure that the HEPA filter (13) is secure.

3) Make sure the correct wet vacuuming or dry vacuuming accessories are fitted according to the required working condition:

* Wide nozzle tool (16) can be used to vacuum spilled liquids or dry waste from carpets or hard floors. (See Fig. G1, G2).

* Dusting brush (14) can be used to vacuum dust from keyboards or other items that collect dust. (See Fig. G3).

* Crevice tool (15) can be used to vacuum small liquid spills or dry dirt from corners, gaps or other hard to reach places. (See Fig. G4)

4) For dust extraction, the 1.8m Heavy-Duty crush resistant vacuum hose (18) can connect to dust extraction outlets of AC/electric power tools.(See Fig. G5)

5) Make sure the battery pack (1) is installed.

6) Press the “I” on the On/Off switch (8) to turn on the vacuum.

WARNING! Check the tank (6) regularly and empty the waste collected when it is about 2/3 full.

WARNING! When wet vacuuming, the Safety float valve

(21) closes when the maximum tank (6) level is reached. In doing so, the suction noise of the vacuum will change and become louder. When this happens, you must switch off the vacuum and empty the tank (6).

15

AFTER SALES SUPPORT

1300 889 028 (toll free)

15 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

16

G1 G2 G3

G5 G4

8.3 Blowing

WARNING! Wear a dust mask and eye protection if blowing creates dust that might be inhaled.

WARNING! Keep bystanders clear from blowing debris.

WARNING! Any material left in the tank (6) may be blown out, causing injury.

1) Ensure the tank (6) is empty and completely dry before using it as a blower.

2) Make sure 1.8m Heavy-Duty crush resistant vacuum hose (18) is connected to the hose outlet - blower (9).

3) Before switching ON, ensure you are firmly holding the accessories connection (19) of the 1.8m Heavy-Duty crush resistant vacuum hose (18).

4) Make sure the battery pack (1) is installed.

5) Press the “I” on the On/Off switch (8) to turn on the blowing function.

AFTER SALES SUPPORT

1300 889 028 (toll free)

16 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

17

9. Maintenance

WARNING: Remove the battery pack (1) from the wet & dry vacuum before carrying out any adjustment, servicing or maintenance.

• Always store your power tool in a dry place. Keep all working controls free of dust.

• We recommend that you clean and dry the appliance immediately after each use.

9.1 Cleaning the appliance head (5)

• Clean the appliance head (5) regularly with a damp cloth and some soap followed by wiping down and drying before storing away.

• Do not submerse the appliance head (5) in water or allow water to enter the appliance head (5).

• Do not use cleaning agents or solvents. These may be aggressive to the plastic parts on the appliance.

9.2 Cleaning the tank (6)

• The tank (6) can be cleaned with a damp cloth and soap or rinsed under running water depending on the amount of dirt. Wipe down and dry before storing away.

9.3. Cleaning the HEPA filter (13)

1) Remove the appliance head (5). Refer to 7.1.

2) Put the appliance head (5) upside down. (See Fig. H1).

3) Unlock the middle lock/unlock plug of the HEPA filter (13) by turning it in an anti-clockwise direction. (See Fig. H2).

4) Set aside the lock/unlock plug. Remove the HEPA filter (13) by pulling it up. (See Fig. H3)

5) Clean the HEPA filter (13) regularly by carefully patting it and cleaning it with a fine brush or hand brush (not supplied).

AFTER SALES SUPPORT

1300 889 028 (toll free)

17 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

18

NOTE: Do not submerse the HEPA filter in water. Do not use a damp cloth to clean.

6) After finishing cleaning of HEPA filter (13), put it back on the appliance head (5) by aligning the two notchs on the HEPA filter

(13) onto the two notches on the filter basket (20). (See Fig. H4).

Then replace the lock/unlock plug in the HEPA filter (13) by inserting the bottom two sides sockets of the lock/unlock plug into the grooves of the HEPA filter (13).(See Fig.H5). Rotate the lock/unlock plug clockwise to lock the HEPA filter (13) onto the appliance head

(5) firmly. (See Fig. H6).

7) Re-install the appliance head (5).Refer to 7.1.

H1 H2 H3 1

2

H4 H5 H6

AFTER SALES SUPPORT

1300 889 028 (toll free)

18 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

19

9.4. Check the safety float valve (21)

Check the Safety Float Valve (21) often to ensure it moves freely within the filter basket (20). To do this, take the appliance head (5) by the handle and tip it carefully so that the filter basket (20) is facing upwards. The safety float valve (21) should move freely up and down.

9.5. General Maintenance

Before each use, inspect the general condition of the appliance and check for the following:

• Loose hardware or screws.

• Misalignment or binding of moving parts.

• Check HEPA filter (13) is securely fitted.

• Damaged or cracked tank (6).

• Any other condition that may affect safe operation.

For battery tools

The ambient temperature range for tool and battery use and storage is 0 o C - 40 o C.

The recommended ambient temperature range for the charging system during charging is 0 o C - 40 o C.

10. Storage and Transportation

•Before storing, remove the battery pack.

•For short term storage:

1) Use hose holder (12) to attach the body of 1.8m Heavy-Duty crush resistant vacuum hose (18). (See Fig. I1). Put the wide nozzle tool (16) connected with 1.8m Heavy-Duty crush resistant vacuum hose (18) on the carry handle (4). (See Fig. I2)

2) Put the dusting brush (14) / crevice tool (15) into the On-board holders (3). (See Fig. I2)

AFTER SALES SUPPORT

1300 889 028 (toll free)

19 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

20

I1 I2

•For long term storage:

Store the wet & dry vacuum, battery pack and the accessories in a dry, clean place which is protected from the effects of weather and temperature and is out of the reach of children and animals.

For transportation in vehicles, remove the battery pack and the accessories, secure the product against movement or falling to prevent injury to persons or damage to this wet & dry vacuum.

11.Warranty

Your new WORKZONE ® TITANIUM 20V Wet & Dry Vacuum will more than satisfy your expectations.

It has been manufactured under stringent WORKZONE ® TITANIUM Quality

Standards to meet superior performance criteria.

You will find your new 20V Wet & Dry Vacuum easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION.

Carefully read through this entire instruction manual before using your new WORKZONE

Your WORKZONE ®

® TITANIUM 20V Wet & Dry Vacuum. Take special care to heed the Cautions and Warnings.

TITANIUM 20V Wet & Dry Vacuum has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this 20V

Wet & Dry Vacuum, making it easy to maintain and operate.

AFTER SALES SUPPORT

1300 889 028 (toll free)

20 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

Use only WORKZONE ® TITANIUM replacement parts for your product. Nonconforming parts or modifications made to parts will void your warranty.

What your 5 year warranty means

Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first 5 years after the date of purchase, we will remedy the problem as quickly as possible once it has been brought to our attention. In the unlikely event of such an occurrence, or if you require any information about the product please contact us via our after sales support services, details of which can be found in this manual and on the product itself.

After Sales Support TEL: 1300 889 028

Service Support

If you have any issues with the operation of your product, please call us on 1300 889 028 for advice, or email us at [email protected]

12. Environmental protection

Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.

21

AFTER SALES SUPPORT

1300 889 028 (toll free)

21 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

22

13. Troubleshooting

WARNING!

You must remove the battery pack(1) before commencing any cleaning, maintenance or inspection work procedures on the appliance. Install the battery pack (1) to the machine when safe to do so.

Symptom

The Wet & Dry

Vacuum suddenly stops during operation.

Suction decreases

Possible Causes

Blocked hose (18)

Solution

Overload and battery temperature too high

Relieve the load on the machine immediately and allow cooling for approx.

30 seconds by running the machine on no-load.

Low battery capacity Charge the battery pack.

Gently remove obstruction using a long stick

Tank (6) has reached 2/3 full or is completely full with waste and debris

HEPA filter (13) is dirty and clogged

Fully empty tank(6)

Clean the HEPA filter (13)

Noise of vacuum changes and suction decreases

Appliance will not operate when the tool is switched on

Tank (6) has reached 2/3 full or is completely full with waste and debris

Incorrect On/Off switch (8) mode selected

Battery pack (1) is not installed.

Fully empty tank (6)

Select the Mode “I” in the

On/Off switch (8)

Install the battery pack (1)

For further inquiries or issues associated with your tool, call our

Customer Service on 1300 889 028 or email us at [email protected]

AFTER SALES SUPPORT

1300 889 028 (toll free)

22 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

Accessories and After Sales parts

Should you find the following accessories are worn or past their user life, replacements can be purchased online via our website https://help.

tools/, call our Customer Service on 1300 889 028 or email us at [email protected]

23

1. Accessory Set

(1 x Wide Nozzle Tool attachment,

1 x Dusting brush attachment,

1 x Crevice Tool attachment)

2. 1.8m Heavy-Duty

Crush Resistant vacuum hose

3. HEPA filter

AFTER SALES SUPPORT

1300 889 028 (toll free)

23 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

24

14. Technical specifications

Rated Voltage

Suction Hose Diameter

Capacity

Vacuum Hose Length

Product Dimensions

Vacuity

Machine weight

20V

35mm

7.5L

1.8m (2m with connector)

41*26.5*36.5cm

8.5±1.5kPa

3.89 kg

This 20V Wet & Dry Vacuum complies with the following

Standards:

Safety: IEC 60335-1

IEC 60335-2-2

AS/NZS 60335.1

AS/NZS 60335.2.2

EMC: EN 55014-1

EN 55014-2

AFTER SALES SUPPORT

1300 889 028 (toll free)

24 e-mail: [email protected]

MODEL No.: YLW6281D • 700234 • 01/2020

This is a blank page

This is a blank page

ALDI guarantees that our exclusive brand products are developed to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to your nearest ALDI store within 60 days from the date of purchase for a full refund or replacement, or take advantage of our after sales support by calling the supplier‘s Customer Service Hotline.

WORKZONE ® TITANIUM is a registered trademark of ALDI Stores

AUS

Made in China

WORKZONE ® TITANIUM is a registered trademark of ALDI Stores

DISTRIBUTED BY:

ALDI STORES

1 SARGENTS ROAD, MINCHINBURY NSW 2770 www.aldi.com.au

Cleaner - Skin

• 1 x Wide Nozzle Tool attachment

• 1 x Dusting brush attachment

• 1 x Crevice Tool attachment

• 1 x 1.8m Vacuum hose

• 1 x HEPA filter

• 1 x Instruction Manual

• 1 x Warranty Card

@

/