Raytheon R1OX Operation Card
Raytheon R11X
The Raytheon R11X is a high-performance radar system designed for use in a variety of marine applications. With its advanced features and capabilities, the R11X provides boaters with a comprehensive and reliable navigation tool.
Some of the key features of the R11X include:
Target Detection and Tracking: The R11X utilizes advanced radar technology to detect and track targets with precision. It can identify and display the position, speed, and course of other vessels, providing boaters with enhanced situational awareness. Range and Gain Adjustment: The R11X allows users to adjust the range and gain settings to optimize target visibility. This enables boaters to customize the radar's performance based on their specific needs and environmental conditions.
Advertisement
Advertisement
OPERATION CARD
Raytheon
OPERATION REFERENCE GUIDE
FOR
R1 OX/R1 1 X
MODEL R10X/11X CONTROLS AND PANEL LAYOUT
OPERATIONS:
1.
POWER:
2.
RANGE:
To turn the radar "ON"; press the ST-BY/OFF key.
To transmit; press the
I
X-MIT/OFFI key. (Warm-up period 90 sec.)
To turn the radar "OFF"; press [ST-BY/OFF and
IX-
MIT/OFF keys together.
Press the [Rarig_e
• I key to increase the range scale. Press the Range
♦
1 key to decrease the range scale.
3.
GAIN:
4.
TUNE:
To adjust the gain, rotate the GAIN control knob clockwise to increase the gain and counterclockwise to decrease the gain.
To adjust the tuning, rotate the
TUNE
control knob to maximize the target echoes on the display and/or peak indication of the tune bar indicators.
5.
SEA CLUTTER (STC):
To adjust the the Sea Clutter (STC), rotate the
SEA CL
control knob CW to increase the STC and decrease the clutter or CCW to decrease the STC.
6.
RAIN CLUTTER (FTC):
To adjust the Rain Clutter (FTC), rotate the
RAIN CL
control knob CW to increase the FTC and CCW to reduce the FTC.
7. VRM:
8.
EBL:
9.
I MODE-I:
10. LL/TD
11. WAYPOINT:
To turn ON/OFF the VRM: Press the I_V_RM1 key.
To change from VRM #1 to VRM #2: Press and hold the (VRM key until buzzer sounds.
To increase or decrease the VRM distance (slowly): Press the or the n
1.( i*
To increase or decrease the VRM (faster): Press the I VRMI key while pressing the or the ,e key.
1 k.
To turn ON/OFF the EBL: Press the I EBL key.
To change from EBL #1 to EBL #2• Press and hold the IEBLI key until buzzer sounds.
To rotate the EBL (slowly): Press the or the A51
To rotate the EBL (faster): Press the EBL I key while pressing the key. or the
Each press changes the bearing readout in the following sequence: RELATIVE —>
TRUE —> MAGNETIC RELATIVE... (Magnetic compass must be connected.)
Each press changes the loran data display in the following sequence: OFF
TD —› OFF... (Appropriate loran navigator must be connected.)
UL
Press the
[WPT
key.
The waypoint mark, bearing and distance, and time-to-go to the waypoint are displayed. (Appropriate loran navigator must be connected.)
If the I LL/TD I key and the WPT] key are pressed together, the waypoint Lat/Long position will be displayed in place of own ship's position.
12. EXP I:
13. IR :
14. SHM I:
When pressed, alternately turns "ON" and "OFF" target expansion.
When pressed, either enables or disables the interference rejection circuit.
When pressed, the Ship's Heading Mark will be "momentarily" removed from the display. If pressed and held, the ship's heading mark will be removed until the key is released.
15. CRT BRILLIANCE:
Press the [DIM/BRIL[ key. The word "BRIL" menu appears on the display. Press the [Ranee
♦ key to increase the brilliance or the[ Range V Ikey to decrease the brilliance. The range of brilliance is from 1-8 steps.
16. PANEL BACKLIGHTING:
Press the DIM/BRIL1 key twice. The word "DIM" menu appears on the display. Press the Range
♦
I key to increase the backlighting or the [Range
♦
[ key to decrease the backlighting. The range is from 0-7.
17. ALARM:
Press the I ALM I key, and "MAKE ZONE PRESS ALM" is displayed. Set the desired alarm zone using VRM #1 and VRM #2. (Use EBL #1 and EBL #2 to make sector zone.)
Press the ALM I key again, and "SET LEVEL PRESS ALM" is displayed. Use the
Range
♦/♦ keys to change the target level for the audible alarm if desired.
Press the 'ALM] key again to set the "IN" Alarm. If the LALM [ key is held depressed, the described zone will be memorized.
Press the ALM[ key again, and the "IN" Alarm is changed to an "OUT" Alarm.
Press the [ALM key again, and the Alarm mode is turned "OFF".
A memorized alarm zone can be recalled by pressing and holding the ALM key.
The characters for
ALM
will be in reverse characters.
18. TIME (TIMED TX MODE):
This feature allows the operator to program the radar to automatically Transmit for a specific programmed period and to return to Standby for a prescribed period.
To set the TX Time: Press the [TIME key. "SET TX PERIOD", "10, 20, 30 SCANS" menu will be displayed. Use the RANGE
♦/♦ keys to make your selection. Your selection will be displayed in reverse characters.
Press the I-TIME key again. A new menu "SET STBY PERIOD", "3, 5, 10, 15, MIN" will be displayed. Use the RANGE
♦/♦ keys to make your selection. Your selection will be displayed in reverse characters.
The menu will automatically be erased after 7 seconds.
To turn the Timed TX mode ON: Press and hold the TIME key until the buzzer sounds.
To turn the Timed TX mode OFF: Press and hold the TIME key until the buzzer sounds.
19. OFF CENTER:
20. ZOOM:
Set the OFF CENTER origin using #1 VRM and #1 EBL.
Press the [OFF CENT key to turn "ON" the OFF CENTER mode. The origin will now be located where #1 VRM and #1 EBL intersect.
Press the OFF CENT key again, and the mode is turned "OFF".
Set the ZOOM origin using #1 VRM and #1 EBL.
Press the i ZOOM l key to turn "ON" the ZOOM mode.
Press the [ZOOM key again, and the ZOOM mode is "OFF".
21. RANGE RINGS:
The I RR] key turns the Fixed Range Rings "ON" or "OFF" alternately.
Press RR j=Range Rings "ON"; Press RR =Range Rings "OFF".
Document No.
7ZPRD0285
Printed in Japan

Public link updated
The public link to your chat has been updated.
Advertisement