Haier HBLC20AB11, L15L6A-G0, L15SV6-A0, L17LV6-T1 User Manual

Add to my manuals
23 Pages

advertisement

Haier HBLC20AB11, L15L6A-G0, L15SV6-A0, L17LV6-T1 User Manual | Manualzz

15"17"20"LCD TV

USER'S MANUAL

Please read this manual carefully before using your television and keep this manual in a good place for future reference.

MODEL:

L15L6A-G0, 15SV6-A0, L17LV6-T1,

HBLC20AB11

To users:

Thank you for using our LCD-TV. After unpacking, please check that you have the following items: Operating instructions, Remote control, AC-

DC adapter, AC wire, and Batteries.

Before connecting the LCD-TV and turning the power on, please read this book carefully. Please keep this book for later use. When it was loss of function by electrostatic shock, please switch the on/off button for restoring the function.

CONTENT

1Safety notice items....................................................................2

2Main functions...........................................................................2

3Front panel controls...................................................................3

4Connection options....................................................................4

5Remote control key functions......................................................5

6Connection instructions..............................................................6

7Basic operating instructions.......................................................10

8Menu operations.......................................................................12

9Specifications...........................................................................21

Safety Notice Items

Incorrect usage will cause fire or electric shock. To prevent this, please do as required when you are installing, using and cleaning this machine. To insure your safety and extend the life-span of LCD-TV, please read the following items carefully before using: l Please read and understand all the instructions before operation; l Please keep the book for later use; l Please comply with the warning instructions on the machine and in this book strictly; l Please comply with the instructions provided; l Please do not use additional devices that are not recommended by manufacturer: l Before operation, please make sure that the operating voltage of your unit is normal; l Do not place the unit on unstable, dusty and humid places; l Never put the unit in direct sunlight or near heat sources; l Allow enough space for proper ventilation; l Please keep water away from the LCD-TV . If water comes in contact with the

LCD-TV, disconnect the power cord from the power source, then wipe the set with a dry soft cloth; l Do not remove the back cover. If services were need, please refer to qualified

Personnel

Main Functions

1-Can be connected with analog RGB input

2-Can be connected with CVBS, S-VIDE, AV input and component

(YPbPr/YCbCr).

3-Can receive TV signal

Front Panel Controls

L15SV6-A0

7

6 5

1 3 2 4

L15L6A-G0

6 7

1 3 5 2 4

L17LV6-T1/HBLC20AB11

6 7

5

2

4

1

3

Control Panel Function

1. MENU Press to display/exit the main menu

2. VOL (VOL-) Volume down / to select the main menu/to adjust the

item in the OSD

VOL (VOL+) Volume up / to select the main menu/ to adjust the

item/to enter the submenu.

3. CH (CH-) TV channel down / to select the item in the menu

CH (CH+) TV channel up / to select the item in the menu

4.TV/AV Select the input signals: PC/COMPONENT/AV/SV/TV

5. Power supply switch

6. Power indicator

Illuminates red in standby mode, illuminates green when the display is

turned on

7.Remote Sensor Receiving remote control sends the infrared remote

signal.

Connection Options

The figure is just for referrence, please see the real.)

VGA Audio Input

Connect the monitor output connector from a PC to the appropriate input port.

AV Audio Input

S-Video Input

Connect S-Video out from an S-Video device to the jacks

Connect audio/video output from an external device to these jacks

Earphone output

DC-IN

Y Pb/Cb Pr/Cr

VGA

L

VGA AUDIO IN

R L

AV AUDIO IN

R

VIDEO

S-VIDEO ANTENNA EARPHONE

YPbPr Input

DC Power Cord Socket

This TV operates on DC power.

The voltage is indicated on the

Specifications page . Never attempt to operate the TV on AC power.

External Video Input

Connect video output from an external device

VGA Input to these jacks.

Antenna Input

Connect cable or

Connect the monitor antenna signals to output connector from the TV, either direca PC to the appropriate tly or through your input port.

cable box.

Remote Control Key Functions

When using the remote control, aim it towards the remote sensor on the TV

2

4

6

8

11

MENU CH+

MENU CH+

VOL-

VOL+

1

VOL-

VOL+

3

1

CH-

2 3

2

4

3

5 6

4 5

7

6

8 9

5

7 8 9 0 DISPLAY

RECALL 0

7

9

10

12

13

Illustration of the keys on the remote control:

1.

Power supply switch

4. VOL+ Volume up / to select the main menu/ to adjust the item/ to enter the submenu.

VOL- Volume down / to select the main menu/ to adjust the item

5. 0-9 TV channel number select

7. -/-- One , two or three bit TV channel select

8. TV/AV Select PC/COMPONENT/AV/SV/TV

9. MTS/SAP Select MONO,STEREO, SAP in NTSC system

10. MUTE MUTE

11. P.STD

Select picture mode: PERSONAL/STANDARD/MILD/FRESH

12. DISPLAY Display current input signal information

13. EXIT Menu exit

Installing Batteries

Open the battery compartment cover on the back side and install the batteries

matching correct polarity(+with+,-with-)

Install two 1.5V AA batteries. Do not mix old or used batteries with new ones.

Replace cover

-

+

Connection Instructions

Grounding

Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

External Equipment Connections

Antenna Connection

- Antenna or Cable Service without a Cable Box Connections

- For optimum picture quality, adjust antenna direction if needed.

VHF antenna

UHF antenna

Multi-family Dwellings/Apartments

(Connect to wall antenna socket) wall antenna socket

RF coaxial wire (75 ohm)

Bronze Wire

Turn clockwise to tighten.

outdoor antenna

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Bronze Wire

Be careful not to bend the bronze wire when connecting the antenna.

To improve picture quality in a poor

signal area, purchase and install a

signal amplifier.

If the antenna needs to be split for two

TV s, install a 2-Way Signal Splitter

in the connections.

If the antenna is not installed properly,

contact your dealer for assistance.

NOTE: All cables shown are not included with the TV

Connection Instructions

PC Setup

You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied).

Connection and use steps:

1.Read the user guide supplied with

your computer and ensure that it has

a VGA connector;

2.Make sure that the power of the LCD

-TV and the PC are off;

3.Connect a D type 15-pin VGA interface

cable ( not supplied ) to the VGA video

interface connector on the PC. Then

connect the other end to the VGA video

interface connector on the back of the

LCD-TV.Tighten the screws on the VGA

connectors once they are firmly

connected;

4.Turn on the power of the LCD-TV first ,

and then turn on the power of the PC;

5.Press the TV/AV button to set the video

input mode of the LCD-TV to PC-RGB;

6.

Check the image on your TV. There may be noise associated with the resolution,

vertical pattern, contrast or brightness in PC mode. If noise is present, change

the PC mode to another resolution, change the refresh rate to another rate or

adjust the brightness and contrast on the menu until the picture is clear. If the

refresh rate of the PC graphic card can not be changed,change the PC graphic

card or consult the manufacturer of the PC graphic card.

7.Our LCD-TV can support the resolution list in table 2 . If the resolution you

want is not listed , the LCD-TV may not display the image properly .

Resolution

Horizontal frequency

(Khz)

Vertical frequency

(Hz)

Clock

(MHz)

640X480

20-55

60-85

32.5-60

800X600

20-55

60-85

1024X768

20-70

720X400

31-47

60-75 70

32.5-60 25-80 28.322

Connection Instructions

VCR Setup

- To avoid picture noise (interference), leave an adequate distance between the

VCR and TV

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has

Composite or S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are off;

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2

1. Connect the audio and video cables from

the VCR's output jacks to the TV input jacks,

as shown in the figure.

When connecting the TV to VCR, match

the jack colors (Video = yellow, Audio

Left = white,and Audio Right = red).

If you connect an S-VIDEO output from

VCR to the S-VIDEO input, the picture

cting a regular VCR to the Video input.

2. Insert a video tape into the VCR and press

PLAY on the VCR. (Refer to the VCR owner s

manual.)

3 .Turn on the power of the LCD-TV first ;

and then turn on the power of the AV

device;

4.Press the TV/AV button to set the video

input mode of the LCD-TV to S-VIDEO

mode or AV mode.

Do not connect to both Video and

S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the

S-Video will work.)

2

1

VCR

Connection Instructions

Cable TV Setup

- After subscribing to a cable TV service from a local provider you can watch cable

TV programming. The TV cannot display TV programming unless a TV tuner

device or cable TV converter box is connected to the TV.

- For further information regarding cable TV service, contact your local cable TV

service provider(s).

Connection Option 1

1. Select 3 or 4 with channel switch on cable

box.

2. Tune the TV channel to the same selected

output channel on cable box.

3. Select channels at the cable box or with

the cable box remote control.

Connection Option 2

1. Connect the audio and video cables from

the Cable Box's output jacks to the TV

input jacks, as shown in the figure.When

connecting the TV to a Cable Box, match

the jack colors

(Video = yellow, Audio Left = white, and

Audio Right = red).

2. Select the input source by using the TV/AV button on the remote control.

3. Select your desired channel with the

remote control for cable box.

External A/V Source Setup

How to connect

Connect the audio and video cables from the external equipment's output jacks to the

TV input jacks, as shown in the figure.

When connecting the TV to external equipment, match the jack colors (Video = yellow,

Audio Left = white, and Audio Right = red).

How to use

1. Select the input source by using the TV/AV button on the remote control. (If connected

to A/V INPUT 1, select Video input source).

2. Operate the corresponding external equi-

pment. Refer to external equipment ope-

rating guide.

Basic Operating Instructions

Turn on the LCD-TV

MENU CH+

MENU CH+

VOL-

VOL-

1

VOL+

CH-

2 3

2

4

3

5 6

VOL+

4 5

7

6

8 9

7 8 9 0

-/--

RECALL 0

DISPLAY

When the power button is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned on, the input mode is displayed on the screen. When the LCD-TV is turned off using the power button, the LCD-TV will go into standby mode and the indicator light turns red.

Note:

The display of the input mode will disappear in 3 seconds.

TV

PC

COMPONENT

AV

SV

Switch Among Different Inputs:PC/COMPONENT/AV/SV/TV

Press the TV/AV button to select the input mode you want.

Each time you press the TV/AV button,

PC/COMPONENT/AV/SV/TV

will appear on the screen in the order.

.

Note:

The display of the input mode will disappear in 3 seconds.

Audio Control

1.Press the VOL+ button to increase the volume.

2.Press the VOL- button to decrease the volume.

30

Mute

1.Press the MUTE button to mute the sound temporarily. A Mute icon appears on the screen.

2.Press the MUTE button or VOL+/VOL again to restore the sound.

The Mute icon disappears.

Basic Operating Instructions

Select the TV Channel You Want

You can use the number keys on the remote control to directly select TV channels.

The LCD-TV can store up to CATV 125, AIR 69 channels , and you can press the keys on the remote control or on the panel to make a selection.

1. if you want to choose any channel from 1 to 9, please press the -/-button

Until is indicated on the screen and then press the relevant key on the

remote control.

for example: if you want to choose channel 8, just press the

Key number 8.

2.If you want to choose a channel bigger than 9, please press the -/-button until - is indicated on the screen. Enter the two digits of the channel number you want to watch..

for example: select channel 16

Note: if you want to choose one digit channel in this condition, you should press

0 first and then one digit number key.

3.If you want to choose a channel bigger than 99 , please press the -/-button

Until -- is indicated on the screen . Enter the three digits of the channel number you want to watch . ( for example: select channel 100)

Note: If you want to choose one digit channel in this condition, you should press

0 twice and then other number keys .

If you want to choose two digits channel in this condition, you should press 0 once and then the rother number keys .

Picture Mode

Press P.STD button on the remote control for menu display . For desired mode as follows:

PERSONA STANDARD MILD FRESH

Menu Operations

* In this manual, the OSD (On Screen Display) may be different from your TV s

because it is just an example to help you with the TV operation.

1. Press MENU button to display the main menu, and VOL+/VOLto select the

main menu .

2. Press CH+/CH to scroll through the parameters

3. Press VOL+/VOL buttons to make changes to the parameters

4. Press the EXIT button to exit the menu

Picture Menu Options

Picture quality can be adjusted for any input separately .

The picture quality on the screen can be adjusted as follows:

1. Press MENU button and VOL+/VOL- until the following menu appears

on the screen.

PC/COMPONENT MENU

PICTURE

BRIGHTNESS 30

CONTRAST 45

SHARPNESS 4

COLOR TEMP. COOL

30

Not available in COMPONENT

TV/AV/SV MENU

PICTURE

BRIGHTNESS 50

CONTRAST 45

SHARPNESS 3

COLOR 51

HUE 50

Note: Sign on top of the menu in this manual may be different from the real

Menu Operations

Picture Menu Options continued

2. Press CH+/CH button to enter the sound menu and to go up and down to

select the desired option .

3.Press VOL+/VOL button to increase and decrease the level toadjust the

selected option to your preference .

4. Repeat step 2 and step 3 until desired sound quality has been achieved .

Function:

BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it will add more light to dark parts of the picture and by decreasing the level ,it will add more dark to light parts of the picture.

CONTRAST : Adjust the contrast of the picture . The image becomes higher as the number increase.

SHARPNESS : Adjust the amount of the detail enhancement , the image

sharpness rises as the number increases (By increasing the level, it will show cleaner and clearer images and by decreasing the level, it will make picture smoother).

COLOR : Press VOL+/VOL- to adjust the color

HUE : Adjust the tone of the picture . Appear and be adjusted only under NTSC

mode

COLOR TEMP. : Press to select the color temperature from WARM/NEUTRAL/

COOL .

Sound Menu Options

Sound can be adjusted for any input as follows:

1. Press MENU and VOL+/VOL- button until the following menu appears on

the screen

SOUND

VOLUME 0

BALANCE 0

BASS 55

TREBLE 40

AUDIO MODE THEATRE

AVL OFF

Menu Operations

Sound Menu Options continued

You can adjust sound options to the levels you prefer.

2. Press CH+/CH button to enter the picture menu and to go up and down to

select the desired option .

3.Press VOL+/VOL button to increase and decrease the level to adjust the

selected option to your preference .

4. Repeat step 2 and step 3 until desired picture quality has been achieved .

Function :

VOLUME : Adjust the volume of your TV

BALANCE : Adjust the balance of the audio output from left to right . When indication value of balance increases toward +50 , sound of the left speaker becomes weaker . When indication value of balance decreases toward -50 , sound of the right speaker become weaker .

BASS : Adjust the bass of the sound . Can only be adjust under PERSONAL mode .

TREBLE : Adjust the treble of the sound . Can only be adjust under PERSONAL mode .

AUDIO MODE : Press VOL+/VOL to select among PERSONAL, VOICE, MUSIC and THEATRE .

AVL: Automatic Volume Limit control reduces effect of large volume changes such as when the ads come on. Press VOL+/- button to set it ON or OFF.

SOUND

VOLUME 0

BALANCE 0

BASS 55

TREBLE 40

AUDIO MODE PERSONAL

AVL OFF

Menu Operations

Function Menu Options

Menu Language Selection

:

The menus can be shown on the screen in the selected language. First select your language.

1. Press the MENU and VOL+/VOLbutton until the GENERAL MENU appears on the screen .

2. Press CH+/CH button to select LANGUAGE.

3. Press VOL+/VOL- button to select your desired language.

From this point on, the on-screen menus will be shown in the language of your choice.

FUNCTION

INPUT SOURCE TV

LANGUAGE ENGLISH

CC MODE CC1

BLUE SCREEN OFF

RESET

Not available in PC/COMPONENT

Function :

INPUT SOURCE : To select the input source from PC/COMPONENT/AV/SV/TV

LANGUAGE : To select the language of the OSD . If you select one language , the OSD will display in the language you have selected .

CC MODE : Closed captions

Closed Captions :

Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs.

Using Closed Captions :

Captions are the subtitles of the dialogue and narration of television programs.

For prerecorded programs, program dialogue can be arranged into captions in advance. Its possible to caption a live program by using a process called realtime captioning, which creates captions instantly. Real-time captioning is normally done by professional reporters using a machine shorthand system and computer for translation into English. Captioning is an effective system for the hearing-impaired, and it can also aid in teaching language skills.

Menu Operations

Function Menu Options Continued

Caption Tips :

Not all TV broadcasts include closed caption signals.

Sometimes TV stations broadcast four different caption signals on the same

channel. By selecting CC 1 to C C 2 , you can choose which signal you view.

CC 1 is usually the signal with the captions, while Another mode might

show demonstration or programming information.

Your TV might not receive caption signals normally in the following situations.

1. Poor reception conditions are encountered:

IGNITION :

Picture may flutter, drift, suffer from black spots, or horizontal streaking.

Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances.

GHOSTS:

Ghosts are caused when the TV signal splits and follows two paths. One is the direct path and the other is reflected off tall buildings, hills or other objects.

Changing the direction or position of the antenna may improve reception.

SNOW:

If your receiver is located at the weak, fringe area of a TV signal, your picture may be marred by small dots. It may be necessary to install a special antenna to improve the picture.

2. An old, bad, or illegally recorded tape is being played.

3. Strong, random signals from a car or airplane interfere with the TV signal.

4. The signal from the antenna is weak.

5. The program wasn t captioned when it was produced, transmitted, or taped.

subtitles on the television screen. Closed captions allow viewers to read the

dialogue and narration of television programs.

Caption / Text

1. Press the MENU and VOL+/VOL- button until the function menu appears on

the screen .

2. Press CH+/CH button to select CC MODE.

3. Press VOL+/VOL- button to select caption : OFF , CC1 , CC2 , CC3 , CC4 ,

TT1 , TT2 , TT3 , TT4

Menu Operations

General Menu Options Continued

Caption:

The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.

TEXT:

The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster.

BLUE SCREEN: To select the blue screen from ON/OFF. If you select ON, the TV set is blue background without signal. If you select OFF, it is black background.

RESET: Press VOL+ button to recover to ex-work status.

Parental Menu Options Continued

1. Press the MENU and VOL+/VOL- button until the following menu appears

on the screen .

2. Press CH+/CH button to select PASSWORD .

PARENTAL

PASSWORD

3. Then input the password 0000. It will bring parental menu display on the

screen. You will see the ollowing menu on your screen:

PARENTAL

CHILD LOCK OFF

MPAA OFF

PG RATING OFF

PG CONTENTS ------

CAN. ENGLISH OFF

CAN. FRENCH OFF

CHANGE PASSWORD

This function enables you to block certain TV channels in accordance to the V-CHIP requirement established by the FCC.

Menu Operations

General Menu Options Continued

Vchip Setting :

CHILD LOCK:

MPAA: When MPAA rating is selected, you could select OFF/G/PG/PG-13

R/NC-17/X .

PG RATING:Select the TV Rating option. You could select from OFF/TV-Y/TR-Y7/

TV-G/TV-PG/TV-14/TV-MA.

PG CONTENTS:

CAN. ENGLISH: Select this option. You could select from OFF/E/C/C8+/G/PG/

14+/18+ .

CAN. FRENCH: Select this option. You could select from OFF/E/G/8+/13+/16+/

18+ .

CHANGE PASSWORD: The "Default Password" preset by the manufacturer is

"0000" . If you want to change the preset password to your own password, just choose any four digits that can be easily remembered and set. Once you set password for a particular channel, that channel will be blocked.

Tuning Menu Options

1. Press MENU and VOL+/VOL button until the following menu appears on the

screen

TUNING

CHANNEL 80

SKIP OFF

AFC ON

FINE TUNE

ANTENNA CATV

AUTO PROGRAM

30

Note: This menu is only appears in TV mode .

2. Press CH +/CH button to enter the tuning menu and to go up and down to

select the desired option .

Menu Operations

Tuning Menu Options Continued

3.Press VOL+/VOL button to increase and decrease the level to adjust the

selected option to your preference .

4. Repeat step 2 and step 3 until desired quality has been achieved ..

Functions:

1. CHANNEL : Press VOL+/VOL- to change the TV channel .

2. SKIP : If you want skip a channel , press VOL+/VOL to select ON , and this

channel will be skip next time when you press CH+/CH . But you can press

digits button to select the channel . If you want to restore the channel , select

OFF.

3. AFC : Auto frequence control . Select ON to improve the image quality .

4. FINE TURN : If the image received is not very good , you can press CH+/CH-

to select FINE TURN item in menu . Then , press VOL+/VOL- button to adjust

and improve the image quality .

5. ANTENNA : To select between AIR and CATV .

6. AUTO PROGRAM : Auto search and save the channel .

Adjust Menu Options

1. Press MENU and VOL+/VOL button until the following menu appears on the

screen

ADJUST

AUTO CONFIG.

PHASE 0

CLOCK 50

H POSITION 50

V POSITION 50

Note: This menu is only appears in PC mode .

Menu Operations

Adjust Menu Options Continued

2. Press CH+/CH button to enter the adjust menu and to go up and down to

select the desired option .

3.Press VOL+/VOL button to increase and decrease the level to adjust the

selected option to your preference .

4. Repeat step 2 and step 3 until desired quality has been achieved ..

Functions:

AUTO CONFIG : Is opted for adjustment of picture location frequency and phase parameters .

PHASE : Removes any horizontal distortion and clears or sharpness the displayed characters .

CLOCK : Adjust the TFT-LCD to match the PC input source

H-POSITION : Picture horizontal adjust

V-POSITION : Picture vertical position adjust .

Specifications

Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations.

Picture, sound system

Antenna input

impedance

Audio output

NTSC-M/PAL-M/PAL-N

75

External input port

1.5W+1.5W

AV input PC input S-video input PC audio input

SCART input 12V DC input Antenna input

AC converter

Temperature

Input: ~100-240V 50/60Hz, Output: --- 12V

Working:+5 C~+35 C

Storage:-10 C~+45 C

NOTE:

The dimension in this manual is a approximation.

Accessories

1 AC-DC converter

2 AC cable

3 Remote control 5 AV cable

4 Owner's Manual 6 Batteries

Note: warranty card is only for the special countries and areas

Note:

All specifications are subject to change without notice.

All quality and size are approximate value.

V0.1

009050****

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement