VTech Learning Fun Tool Box User Manual
VTech Learning Fun Tool Box is a versatile and educational toy that combines creative role play with interactive learning experiences. With its four included play tools – a hammer, screwdriver, wrench, and saw – kids can engage in imaginative construction and repair activities while developing essential skills. In Learning Mode, children learn shapes, numbers, and colors through engaging phrases and sounds, while Play Mode offers fun fixing games and playful sound effects. Additional features include cheerful melodies, flashing lights, and an automatic shut-off to conserve battery life.
Advertisement
Advertisement
User’s Manual
Learning Fun Tool Box
TM
© 2010 VTech
Printed in China
91-113100-000-006
INTRODUCTION
Thank you for purchasing the VTech ® Learning Fun Tool Box
TM learning toy!
Learning meets role play for hours of fun! Interactive tool box features four play tools. Use the screwdriver to turn gears, use the wrench to turn bolts, use the hammer to tap nails and pretend to saw a piece of wood – use your tools to learn!
Two Nails
Hammer
Three Shape
Buttons
Sliding Saw
Two Bolts
Screwdriver
Wrench Off/Mode Selector Switch Three Turning Gears
INCLUDED IN THIS PACKAGE
- One VTech ® Learning Fun Tool Box
TM
- Four play tools: hammer, screwdriver, wrench, saw
- One user’s manual
WARNING:
All packing materials, such as tape, plastic sheets, wire ties and tags are not part of this toy, and should be discarded for your child’s safety.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF .
2. Locate the battery cover on the bottom of the unit. Use a coin or a screwdriver to loosen the screw.
3. Install 2 new ‘AA’ (AM-3/LR6) batteries following the diagram inside the battery box. The use of new alkaline batteries is recommended for maximum performance.
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum performance;
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision (if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbonzinc) or rechargeable (nickel-cadmium)
• Only batteries of the same or equivalent type as recommended are to be used;
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended number of power supplies.
• Do not dispose of batteries in fire.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
PRODUCT FEATURES
1. OFF/MODE SELECTOR
SWITCH
To turn the unit ON , slide the OFF/
MODE SELECTOR SWITCH to the
LEARNING MODE ( ) or the PLAY
MODE ( ) position. To turn the unit
OFF , slide the OFF/MODE SELECTOR
SWITCH to the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech ® Learning Fun Tool Box
TM
will automatically power-down after approximately 50 seconds without input. The unit can be turned on again by pressing any button.
ACTIVITIES
1. Slide the OFF/MODE SELECTOR switch to turn the unit on . You will hear a sing-along song, a welcoming phrase and playful sounds. The lights will flash with the sounds.
2. Open and close the cover to hear a variety of phrases and sounds. The lights will flash with sounds.
3. Press a shape button to learn shapes and numbers in Learning Mode and to play a fixing game in Play Mode .
The lights will flash with sounds.
4. Tap the nails to count numbers 1 to
10 in Learning Mode and to hear fun phrases and great sounds in
Play Mode . The lights will flash with sounds.
5. Turn the bolts to learn colors in
Learning Mode and to hear playful sounds in Play Mode . The lights will flash with sounds.
6. Turn the gears to hear playful sounds and upbeat music. The lights will flash with sounds.
7. Slide the saw on the wood to hear playful sounds and upbeat music. The lights will flash with sounds.
MELODY LIST:
1. I’ve Been Working on the Railroad
2. Little Jack Horner
3. Pop! Goes the Weasel
4. Row, Row, Row Your Boat
5. Take Me Out to the Ball Game
6. Alphabet Song
7. Jack Be Nimble
SUNG SONG LYRICS
One, two, three,
Play with me!
With our tools we’ll be happy.
With a tap of the hammer and a turn of the screw,
There’s so much that we can do!
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat source.
3. Remove the batteries when the unit will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions, please follow these steps:
1. Please turn the unit OFF .
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON . The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new batteries.
If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a service representative will be happy to help you.
For information on this product’s warranty, please call our Consumer
Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada.
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied by a responsibility that we at VTech ®
take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the
U.S., or 1-877-352-8697 in Canada, with any problems and/or suggestions that you might have. A service representative will be happy to help you.
FCC Notice:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME
À LA NORME NMB-003 DU CANADA.
10

Public link updated
The public link to your chat has been updated.
Advertisement