Genius F31U V Manual

Genius F31U V Manual
English
Game Device Features
1.
2.
3.
4.
Ten function buttons include trigger
Eight-way view finder (Hat switch)
Throttle/Rudder controller
USB (Universal Serial Bus) interface
5. Vibration feedback function
Game Device Installation
1. Make sure you turn your computer on.
2. Insert the driver’s disc into the CD-ROM
drive, and the setup program will start automatically. If not, start the setup
program manually by selecting Start/Run and type in “E:\setup”(Where “E:”
represents the location of the CD-ROM drive), then press the Enter key.
3. Please follow the instructions on the screen to finish the driver installation.
(Some operating systems will install the DirectX program automatically first,
so just follow the instructions on the screen to finish the program installation.)
4. After the software installation is completed, you can connect your game
device to the USB port on your computer.
5. Click Start / Settings / Control Panel and double click on the “Game
Controllers” or “Gaming Options” icon.
6. In the “Game Controllers” or “Gaming Options” screen, you can calibrate
and test your game controller before you play any game.
7. When you finish the calibration and test, you can now play any game.
Important:
1. In order to get the best effects when playing, we recommend you calibrate and test
your game controller first. Especially if you reboot your PC or you re-plug in the
game controller to your computer, we strongly suggest you calibrate and test your
game controller again.
2. The driver will work with the DirectX 7.0a or a newer version. Please check the
DirectX version on your system, and upgrade if necessary.
3. The vibration effect occurs according to game software. For details, refer to the
game software manual.
1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement