Analog way PLS300 User manual

Analog way PLS300 User manual
Programmer’s Guide
For PLS300
1
A1: Introduction
If you need to use your own Software Control program from a PC or WORKSTATION with an RS-232 or LAN port, the device allows communication
through an ASCII code protocol.
The device treats any character that it receives on the RS-232 or LAN as a possible command but only accepts legal commands.
There is no starting/ending code needed in a command string.
A command can be a single character typed on a keyboard and does not require any special character before or after it.
(It is not necessary to press "ENTER" on the keyboard). A command can be preceded by a value (See chapter A-2).
When the device receives a valid command, it will execute the command. Then it will send back the status of the parameters that have changed due
to this command.
If the command cannot be executed (value out of range, no signal on the selected input),etc. The device will just sends back the current status of
the corresponding parameters.
If the command is invalid, an error response will be returned to the control device. All responses returned to the control device end with
a carriage return <CR> and a line feed <LF> signaling the end of the response character string (see chapter A-3).
A2: Commands structure
The above listed devices share the same code structure.
Commands are made of numerical values for arguments followed by the command characters (one or Two case-sensitive alphabetical letters). Usually the same
characters (letters) are used for the [read Command] as well as the [write command].
The indexes are defined numbers indicating the how the arguments for the command apply. For example a layer number, an input number, a preset number, etc.
They are separated with a comma.
There are commands without index and others with up to 3 indexes. Each index is followed by a comma character. The final argument, also refered to as the “value”
does not have a comma between it and the command.
2
A [write command] is made of indexes followed by the numerical value followed by the command characters.
Write command = [[index,] ...] + Value + Character (s) code (s)
For example: “1,2,0IN” or “4YB”
A [read command] is made of indexes followed immediately by the command characters. (no numerical value)
Read command = [[index,] ...] Character (s) code (s)
For example: “1,2,IN” or “YB”
A3: Examples
Document notation:
1) Command with 1 index : OFORMAT
Command to set the Main output format to XGA: 0,12OF
Answer: OF0,12<CR><LF> which mean that the main output format is now 1024x768
2) Command with 2 indexes : PE_INPUTNUM
Command to set the input 4 displayed in background layer of Next Preset: 1,2,4IN
Answer: IN1,1,4<CR><LF> which mean that the background layer of the next preset will display the input 4 signal
3) Read command without index : TAKEAVA
Read command to know if the TAKE command is available: TA
Answer: TA1<CR><LF> which mean that the device is ready to accept the TAKE command.
4) Read command with 2 indexes : SET_ASPECT_RATIO_OUT
Read command to know how is displayed a signal plugged on the input 4: 3,so
Answer: so3,2<CR><LF> which mean that the input 4 is displayed cropped
3
A4: Error codes
Answer: E10<CR><LF> which mean invalid command
Answer: E11<CR><LF> which mean index value error (index value out of range)
Answer: E12<CR><LF> which mean index number error (too or few indexes)
Some commands are only available as [Read command], they are status and are colored in blue as this line.
Some commands are colored in yellow as this line to indicate they were added or modified in this version.
A5 COMMUNICATION PORTS
4
Group
SYSTEM
Name
CmdResp Description
DIESE
#
#
Request the retrieval of all the
variables
READY
*
*
Ready Device Flag
DEV
UPDATER
?
yU
FACTORYRESET
POSMEMORYRESET
CSTORE
Read / Min Max Default
Values
Write Value value value
Rd/Wr 0
1
0
Rd
0
1
0
78
0
78
255
78
0
0= Initialization in progress
1 = Ready
78 = PLS-300
1 then 254 => Reboot
0
1
0
Auto reset
0
1
0
0
1
0
Auto reset
0 = Free
1 = Flash writing in progress
0 = No lock
1 = Locked menu
2 = Locked front panel
1, …, 8 = Brightness level, 12,5%
step
1, …, 100 = Brightness level, 1%
step
DEV MMS device type
Rd
yU
Device reboot for update
Rd/Wr
Apply factory settings to the
YR YR
Rd/Wr
device( except image settings )
YE YE
Erase stored image settings
Rd/Wr
FLASH memory writing in progess.
YS YS
Rd
Do not power off
LOCK
YK YK
Device locking
Rd/Wr 0
2
0
LCDBRIGHTNESS
YB YB
Front panel display brightness
Rd/Wr 1
8
8
KEYBRIGHTNESS
Yb
Front panel keys brightness
Rd/Wr 10
100
100
TBAR_ENABLE
YD YD
Enable disable T-BAR
Rd/Wr 0
1
1
Yb
COPKIND
CK CK
Kind of slow in-progress operation Rd
0
6
0
0 = None
1 = Auto centering
2 = Auto setting
3 = StandBy
4 = Picture recording
5 = Reset to default factory
setting
6 = Reset User settings
COPPROGRESS
CP CP
Progress percent of the slow
operation
Rd
0
100
0
Percent : 0 to 100%
AXION
yA
yA
Device is driven by Orchestra
Rd/Wr 0
1
0
AUTO_LOCK
YL
YL
Forbide the use of a signal-less
input
Rd/Wr 0
1
1
AUTO_TAKE
YT
YT
Automatic Take after an input
change
Rd/Wr 0
1
0
AUTO_STEPBACK
Ys
Ys
Automatic preset toggle after a
TAKE
Rd/Wr 0
1
0
FREEZE_MODE
Ym Ym
Input freeze mode
Rd/Wr 0
1
0
CONTROLS
Index #1
Index #2
0 = Device is not driven by ORC50
1 = Device is driven by Orc-50
0 = Signal less input can be
selected
1 = Signal less input can not be
selected
0 = AUTO-TAKE Disable
1 = AUTO-TAKE Enable
0 = AUTO- PRESET-TOGGLE
Disable
1 = AUTO- PRESET-TOGGLE
Enable
0 = Freeze by input
1 = Freeze all inputs
5
Group
CmdResp Description
FRAME_ALERT
Yf
Yf
TRANSPARENT_BACKGROUND
Yt
Yt
BLACK_FILL
bF
bF
DISABLE_ID
bI
bI
STDBYSTATUS
wS wS
STDBYREQUEST
wQ wQ
STDBYPROJ_ON
wN wN
STDBYPROJ_OFF
wF wF
STDBYPROJ_RATE
wR wR
STDBYPROJ_CTRL
wC wC
VERI1
VERI2
VERI3
VERI4
xi
xj
xk
xl
STANDBY
VERSION
Read / Min Max Default
Values
Write Value value value
0 = No input
1 = Input1
2 = Input2
3 = Input3
4 = Input4
Back-up input when an input loose
Rd/Wr 0
12
0
5 = Input5
its signal
6 = Input6
9 = Input9
10 = Input10
11 = Input11
12 = Input12
0 = use BLACK_FILL
Disable the the black fiilng of the
Rd/Wr 0
1
1
1 = Disable black filling only for
bakgrounfd live layer
background
Fill PIP with black depending on
0 = Disable black filling
Rd/Wr 0
1
0
the aspect ratio
1 = Enable black filling
Disable Frame and Ids on the
Rd/Wr 0
1
0
preview output
0 = Normal mode
Standby mode
Rd/Wr 0
1
0
1 = Standby mode
0 = Wake up
Request for standby or wake up
Rd/Wr 0
1
0
1 = Standby
Message to wake-up an output
Rd/Wr 0
255
0
display device ( 50 characters)
Message to send an output display
Rd/Wr 0
255
0
device to sleep ( 50 characters)
0 = 1200bauds
1 = 2400bauds
Output display device UART speed Rd/Wr 0
3
2
2 = 9600bauds
3 = 19200bauds
0 = No request
1 = Wake up request
Rd/Wr 0
4
0
2 = Standby request
3 = Clear Wake up message
4 = Clear standby message
Byte 0 and 1 of the device ID
Rd
0
65535 0
ex : AAAA
Byte 2 and 3 of the device ID
Rd
0
65535 0
ex : AAAA
Byte 4 and 5 of the device ID
Rd
0
65535 0
ex : AAAA
Byte 6 and 7 of the device ID
Rd
0
65535 0
ex : AAAA
Name
xi
xj
xk
xl
Index #1
Index #2
min = 0 max = 49
min = 0 max = 49
6
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
Index #1
0 = Number of
programmables
components
1 = Main microcontroler
2 = Front panel
micro-controler
3 = FPGA
Caecina
4 = FPGA Fannia
5 = FPGA
Thrasea
6 = Synchro
CPLD
VERK
xK
xK
Checksum/version of the
programmable components
Rd/Wr 0
65535 0
VERV
VERUPD
xV
xU
xV
xU
Variable set version
Updater version
Rd
Rd
65535 42
65535 0
OPT
yo
yo
Detected options
Rd
0
65535 0
Moher board revision
Auto-setting request for all the
inputs
Rd
0
255
0
1
0
REV
xR
xR
IN_AUTOSET_ALL
Ia
Ia
INPUT
IN_AUTOSET
Ii
0
0
Ii
Auto-setting request for the
specified input
Rd/Wr 0
Rd/Wr 0
1
0
Index #2
bit 0 = Lan Module
bit 1 = SDI In 1 board (SDI 1 and
2)
bit 2 = Recording board
bit 3 = CF Caecina
bit 4 = CF Fannia
bit 5 = CF Thrasea
bit 6 = SDI In 2 board (SDI 3 and
4)
bit 7 = Audio Evolution
bit 8 = HDCP DVI In Evolution
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
7
Group
Name
IN_USR_FORMAT
Read / Min Max Default
Values
Write Value value value
0 = None
1 = Invalid
2 = Unknown
3 = SDTV NTSC
4 = SDTV PAL
5 = SDTV SECAM
6 = SDTV BW
7 = SDTV 480i
8 = SDTV 576i
9 = EDTV 480p
10 = EDTV 576p
11 = HDTV 720p
12 = HDTV 1035i
13 = HDTV 1080i
14 = HDTV 1080p
15 = HDTV 1080sF
16 = CPU VGA
17 = CPU 800x480
18 = CPU WVGA
19 = CPU SVGA
20 = CPU 1280x600
Format/standard of the input signal
Rd/Wr 0
42
0
21 = CPU 720p RGB
corrected by user
22 = CPU XGA
23 = CPU WXGA
24 = CPU SWXGA
25 = CPU 800p RGB
26 = CPU SWXGA+
27 = CPU 1152x864
28 = CPU 900p RGB
29 = CPU 1600x900
30 = CPU 960p RGB
31 = CPU SXGA
32 = CPU 1360x1024
33 = CPU DILA4/3
34 = CPU SXGA+
35 = CPU WSXGA+
36 = CPU 1080p RGB
37 = CPU 2K
38 = CPU UXGA
39 = CPU WUXGA
40 = CPU 1920x1440
41 = CPU QXGA
42 = CPU 1366x768
CmdResp Description
Index #1
iU
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
iU
Index #2
8
Group
Name
CmdResp Description
IN_TYPE
iK
iK
Input signal type
IN_SYNC_LOAD
il
il
Analog H sync load
Read / Min Max Default
Values
Index #1
Write Value value value
0 = SDTV Composite
1 = SDTV Y/C
2 = SDTV/EDTV/HDTV RGBS
TTL/Analog
3 = SDTV/EDTV/HDTV RGB
SOG
4 = SDTV/EDTV/HDTV YUV
5 = Computer SOG
6 = Computer H&V or Composite
(TTL/Analog)
0 = Input1
7 = Computer B&W
1 = Input2
8 = DVI-D EDTV/HDTV RGB 16- 2 = Input3
235
3 = Input4
9 = DVI-D EDTV/HDTV YUV
4 = Input5
Rd/Wr 0
17
13
10 = DVI-D Computer RGB 0-255 5 = Input6
11 = DVI-D Computer RGB 16- 8 = Input9
235
9 = Input10
10 = Input11
12 = SDI SDTV/HDTV
13 = Analog Computer, separated 11 = Input12
H&V synchro
14 = Analog Computer,
composite TTL synchro
15 = Analog Computer,
composite analog synchro
16 = Analog RGB video,
composite TTL synchro
17 = Analog RGB video,
composite analog synchro
0 = Input1
1 = Input2
2 = Input3
3 = Input4
0 = Hi-Z
4 = Input5
Rd/Wr 0
1
0
1 = 75 ohm loaded
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
Index #2
9
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
IN_USED
iu
iu
Input is enabled
Rd/Wr 0
1
1
IN_SD_STD
iS
iS
Decoded video standard
Rd/Wr 0
7
0
IN_SD_STA
iV
iV
Video Signal stability
Rd/Wr 0
1
1
IN_SYNCHRONIZED
iY
iY
VIS Synchronisation group
Rd/Wr 0
3
0
IN_HDCP_ENABLE
iH
iH
Enable/disable the HDCP support
Rd/Wr 0
of a DVI input
1
1
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
0 = Auto
1 = NTSC (M,J)
2 = Input3
2 = PAL (BDGHIN)
3 = Input4
3 = PAL (M)
4 = Input5
4 = PAL (N-Combination)
5 = Input6
5 = NTSC 4.43
8 = Input9
6 = SECAM
9 = Input10
7 = PAL 60
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
0 = Stable Source ( DVD )
4 = Input5
1 = VCR Source ( Video cassette
5 = Input6
recorder )
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
0 = Does not belong to any VIS 1 = Input2
Group
2 = Input3
1 = Groupe VIS 1 group for
3 = Input4
analog input
4 = Input5
2 = Groupe VIS 2 group for
5 = Input6
8 = Input9
analog input
9 = Input10
3 = Groupe VIS 3 group for
analog input
10 = Input11
11 = Input12
10 = Input11
11 = Input12
10
Group
Name
CmdResp Description
IN_HDCP_CABLE_LEN
iC
IN_KEYING_TYPE
KT
IN_KEYING_R_LEVEL
iC
KT
Lenght of an DVI input cable
Read / Min Max Default
Values
Write Value value value
0 = Less than 10 meter cable
length
Rd/Wr 0
2
0
1 = 5 to 20 meters cable length
2 = More than 15 meters cable
length
Keying type
Rd/Wr 0
4
0
KR KR
Keying level (Red )
Rd/Wr 0
255
0
IN_KEYING_G_LEVEL
KG KG
Keying level (Green)
Rd/Wr 0
255
255
IN_KEYING_B_LEVEL
KB KB
Keying level (Bule)
Rd/Wr 0
255
0
KEYING
0 = No keying
1 = Luma Key Keying
2 = ChromaKey Keying
3 = Luma Key Keying + DSK
4 = ChromaKey Keying + DSK
Index #1
Index #2
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
11
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
IN_KEYING_TOLER
KH KH
Keying Tolerance (for chroma and
Rd/Wr 0
luma key)
255
10
IN_KEYING_LUMA_LOW_LEVEL
KL
KL
Minimum luma level
Rd/Wr 0
255
0
IN_KEYING_LUMA_HIGH_LEVEL
KM KM
Maximum luma level
Rd/Wr 0
255
255
IN_KEYING_DSK_ALPHA
KA KA
Brightness of DSK background
Rd/Wr 0
255
64
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
12
Group
INPUT
STATUS
Name
CmdResp Description
IN_KEYING_INVERT
KI
KI
IN_KEYING_GRAB_ENABLE
Kg
Kg
IN_KEYING_GRAB_GET
Kc
Kc
IN_KEYING_GRAB_H
IN_KEYING_GRAB_V
Kh
Kv
Kh
Kv
Invert keying area
Enable/disable the keying color
grabber mode
Capture the coolor selected by the
grabber and apply the settings
Horizontal position of the grabber
Vertical position of the grabber
Read / Min Max Default
Values
Write Value value value
Index #1
Rd/Wr 0
1
0
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
Rd/Wr 0
1
0
0 = Disable the grabber
1 = Enable the grabber
Rd/Wr 0
1
0
Percent of OSCREEN_UTIL_H
Rd/Wr 0
Rd/Wr 0
65535 32768 Precent of OSCREEN_UTIL_V
65535 32768 Auto reset
SIG_HPOL
sh
sh
Input H sync polarity
Rd
0
1
0
0 = Negative Synchro
1 = Positive Synchro
SIG_VPOL
sv
sv
Input V sync polarity
Rd
0
1
0
0 = Negative Synchro
1 = Positive Synchro
SIG_SYNC_TYPE
sK
sK
Input sync type
Rd
0
3
0
0 = Séparated Synchros H&V
1 = Composite TTL Synchro
2 = Composite Analog Synchro
3 = Synchro on Green (SOG)
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
13
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
SIG_FREQ_FIELD
sf
sf
Input frame frequency
Rd
0
65535 0
Unit = 1/100Hz
SIG_FREQ_LINE
sl
sl
Input line frequency
Rd
0
65535 0
Unit = 1/100Hz
SIG_COMPLETE
sc
sc
Input scan completed
Rd
0
1
0 = scan in progress or failed
1 = scan completed
0
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
14
Group
Name
SIG_DETECTED_FORMAT
CmdResp Description
sD
sD
Input detected format name
Read / Min Max Default
Values
Write Value value value
0 = None
1 = Invalid
2 = Unknown
3 = SDTV NTSC
4 = SDTV PAL
5 = SDTV SECAM
6 = SDTV BW
7 = SDTV 480i
8 = SDTV 576i
9 = EDTV 480p
10 = EDTV 576p
11 = HDTV 720p
12 = HDTV 1035i
13 = HDTV 1080i
14 = HDTV 1080p
15 = HDTV 1080sF
16 = CPU VGA
17 = CPU 800x480
18 = CPU WVGA
19 = CPU SVGA
20 = CPU 1280x600
Rd
0
42
0
21 = CPU 720p RGB
22 = CPU XGA
23 = CPU WXGA
24 = CPU SWXGA
25 = CPU 800p RGB
26 = CPU SWXGA+
27 = CPU 1152x864
28 = CPU 900p RGB
29 = CPU 1600x900
30 = CPU 960p RGB
31 = CPU SXGA
32 = CPU 1360x1024
33 = CPU DILA4/3
34 = CPU SXGA+
35 = CPU WSXGA+
36 = CPU 1080p RGB
37 = CPU 2K
38 = CPU UXGA
39 = CPU WUXGA
40 = CPU 1920x1440
41 = CPU QXGA
42 = CPU 1366x768
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
15
Group
Name
SIG_CURRENT_FORMAT
CmdResp Description
sF
sF
Input current format name
Read / Min Max Default
Values
Write Value value value
0 = None
1 = Invalid
2 = Unknown
3 = SDTV NTSC
4 = SDTV PAL
5 = SDTV SECAM
6 = SDTV BW
7 = SDTV 480i
8 = SDTV 576i
9 = EDTV 480p
10 = EDTV 576p
11 = HDTV 720p
12 = HDTV 1035i
13 = HDTV 1080i
14 = HDTV 1080p
15 = HDTV 1080sF
16 = CPU VGA
17 = CPU 800x480
18 = CPU WVGA
19 = CPU SVGA
20 = CPU 1280x600
Rd
0
42
0
21 = CPU 720p RGB
22 = CPU XGA
23 = CPU WXGA
24 = CPU SWXGA
25 = CPU 800p RGB
26 = CPU SWXGA+
27 = CPU 1152x864
28 = CPU 900p RGB
29 = CPU 1600x900
30 = CPU 960p RGB
31 = CPU SXGA
32 = CPU 1360x1024
33 = CPU DILA4/3
34 = CPU SXGA+
35 = CPU WSXGA+
36 = CPU 1080p RGB
37 = CPU 2K
38 = CPU UXGA
39 = CPU WUXGA
40 = CPU 1920x1440
41 = CPU QXGA
42 = CPU 1366x768
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
16
Group
Name
SIG_FORMAT_LIST
CmdResp Description
sL
sL
Bit field of the fomats compatible
with the detected format
Read / Min Max Default
Values
Write Value value value
Rd
0
255
0
SIG_SCANTYPE
ss
ss
Input scan type
Rd
0
3
0
SIG_HTOTAL_THEORIC
sH
sH
Total number of pixels per line
Rd
0
65535 0
SIG_HTOTAL_MAXI
sM sM
Maximal number of pixels per input
Rd
line
0
65535 0
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Bits 0 to 7
Slice
1 = Bits 8 to 15
Slice
2 = Bits 16 to 23
Slice
3 = Bits 24 to 31
Slice
4 = Bits 32 to 39
Slice
5 = Bits 40 to 47
Slice
0 = Input1
1 = Input2
2 = Input3
0 = Progressive
3 = Input4
1 = Interleaved, Top field first
4 = Input5
2 = Interleaved, Bottom field first 5 = Input6
3 = Segmented frame
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
Unit = pixels
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
Unit = pixels
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
17
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
SIG_WIDTH
sw
sw
Input displayed pixel count
Rd
0
65535 0
Unit = pixels
SIG_HEIGHT
st
st
Input displayed line count
Rd
0
65535 0
Unit = pixels
SIG_HDCP
sn
sn
Input HDCP status
Rd
0
1
0
SIG_MEM_SLOT
sS
sS
Memory slot index
Rd
0
255
255
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
18
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
SET_HPOS
SH SH
Input horizontal position
Rd/Wr 0
2048
1024
1024 = neutral
SET_VPOS
SV SV
Input vertical position
Rd/Wr 0
2048
1024
1024 = neutral
SET_HSIZE
Sw Sw
Input horizontal size
Rd/Wr 0
4096
2048
2048 = neutral
SET_VSIZE
Sh
Input vertical size
Rd/Wr 0
4096
2048
2048 = neutral
INPUT
SETTINGS
Sh
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
19
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
SET_BRIGHTNESS
Sg
Sg
Input brightness
Rd/Wr 0
255
128
128 = neutral
SET_CONTRAST
Sc
Sc
Input Contrast
Rd/Wr 0
255
128
128 = neutral
SET_COLOR
Sr
Sr
Input color level
Rd/Wr 0
255
128
128 = neutral
SET_HUE
Su
Su
Input hue (NTSC only)
Rd/Wr 0
255
128
128 = neutral
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
20
Group
Name
CmdResp Description
SET_HTOTAL
ST
SET_PHASE
ST
Read / Min Max Default
Values
Write Value value value
Input total pixel per line
Rd/Wr 0
65535 0
Unit = pixels.
SS SS
Input Phase
Rd/Wr 0
31
16
SET_AUTOCAD
Sa
Sa
Input autocentering reques
Rd/Wr 0
1
0
Auto reset
SET_USER_GAIN_R
sr
sr
ADC R channel adjustment
(advanced setting)
Rd/Wr 0
255
128
128 = neutral
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
21
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
SET_USER_GAIN_G
sg
sg
ADC G channel adjustment
(advanced setting)
Rd/Wr 0
255
128
128 = neutral
SET_USER_GAIN_B
sb
sb
ADC B channel adjustment
(advanced setting)
Rd/Wr 0
255
128
128 = neutral
SET_PULLDOWN_2_2
Sn
Sn
Enable/disable the auto 2:2
pulldown
Rd/Wr 0
1
1
0 = Disable automatic detection
1 = Enable automatic detection
SET_PULLDOWN_3_2
Sp
Sp
Enable/disable the auto 3:2
pulldown
Rd/Wr 0
1
1
0 = Disable automatic detection
1 = Enable automatic detection
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
22
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
SET_CROP_WIN_POS_H
SI
SI
Cropping window horizontal
position
Rd/Wr 0
65535 32768
Percent = 65535 = 100% : all
cropping on the left
SET_CROP_WIN_POS_V
SJ
SJ
Cropping window vertical position Rd/Wr 0
65535 32768
Percent = 65535 = 100% : all
cropping on the top
SET_CROP_WIN_SIZE_H
SK SK
Horizontal cropping
Rd/Wr 0
58981 0
Percent = 65535 = 100%
SET_CROP_WIN_SIZE_V
SL
Vertical cropping
Rd/Wr 0
58981 0
Percent = 65535 = 100%
SL
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
23
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
SET_ASPECT_RATIO_IN
si
si
Input image aspect ratio
Rd/Wr 0
4
0
SET_ASPECT_RATIO_OUT
so
so
Output image aspect ratio
Rd/Wr 0
3
1
SET_OVER_SCAN
sO sO
input image Overscan/Underscan Rd/Wr 0
1
1
SET_FORCE_4_3
SF
Force the aspect ratio of
PAL/NTSC input to 4/3
1
1
SF
Rd/Wr 0
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
0 = Distorted, input aspect ratio
2 = Input3
not preserved
3 = Input4
1 = Not distorted, black bands
4 = Input5
added
5 = Input6
2 = Not distorted, no black bands
8 = Input9
added
9 = Input10
3 = Not distorted and no scaling
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
1 = forced
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = 4/3 Fullscreen
1 = 4/3 with 16/9 content + black
stripes
2 = 4/3 with 2.35 content + black
stripes
3 = 4/3 with 16/9 content without
black stripes
4 = 19/9 with 4/3 content + black
stripes
24
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
SET_RESET_SETTINGS
Ss
Ss
Current input default settings
Rd/Wr 0
1
0
SET_FREEZE
Sf
Sf
Freeze of the input
Rd/Wr 0
1
0
SET_MOTION_DETECT
Sm Sm
0 : max correction; 15 : min
correction
Rd/Wr 0
15
15
1 = Freeze
Index #1
Index #2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
25
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PE_INPUTNUM
IN
IN
Displayed input number or frame
or logo number
Rd/Wr 0
12
0
0 = No input
1 = Input1
2 = Input2
3 = Input3
4 = Input4
5 = Input5
6 = Input6
9 = Input9
10 = Input10
11 = Input11
12 = Input12
PE_SOURCENUM
IS
IS
Source number
Rd/Wr 0
64
0
Same Orc-50
PRESET
ELEMENT
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
26
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PE_AUDIO_AUX_MUTE
Aa
Aa
Auxiliary input mixing enable
Rd/Wr 0
1
0
1 = Enable.
PE_SMOOTH_MOVE
ps
ps
« Smooth Move » activation
Rd/Wr 0
1
1
1 = Enable.
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
27
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PE_NEW_ID
pN
pN
Unique layer identifier number
Rd/Wr 0
PE_POS_H
pH
pH
Layer left H position on output
screen
Rd/Wr 0
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
1
0
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Unit = pixels ( 32768 = screen left Preset 1
65535 32768
for output1
border )
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
28
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PE_POS_V
pV
pV
Layer top V position on output
screen
Rd/Wr 0
PE_SIZE_H
pW pW
Layer H size on output screen
(without borders)
Rd/Wr 0
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Unit = pixels ( 32768 = screen top Preset 1
65535 32768
for output1
border )
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Unit = pixels ( Max=16x2048 =
Preset 1
65535 1600
for output1
32768)
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
29
Group
Name
CmdResp Description
PE_SIZE_V
pS
pS
PE_CROP_WIN_POS_H
CH CH
Read / Min Max Default
Values
Write Value value value
Layer V size on output screen
(without borders)
Rd/Wr 0
65535 1200
Unit = pixels (Max=16x2048 =
32768)
Cropping window horizontal
position
Rd/Wr 0
65535 32768
Unit = percent ( 65535 = 100%
= : all cropping on the left )
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
30
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PE_CROP_WIN_POS_V
CV CV
Cropping window vertical position Rd/Wr 0
65535 32768
Unit = percent ( 65535 = 100%
= : all cropping on the top )
PE_CROP_WIN_SIZE_H
CW CW
Horizontal cropping
58981 0
Percent = 65535 = 100%
Rd/Wr 0
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
31
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PE_CROP_WIN_SIZE_V
CS CS
Vertical cropping
Rd/Wr 0
58981 0
Percent = 65535 = 100%
PE_ALPHA
pA
Layer transparency
Rd/Wr 0
255
0 = 100% = transparent
255 = 0% = visible
pA
255
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
32
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PE_BORDER_STYLE
bS
bS
Border style
Rd/Wr 0
1
0
0 = No border
1 = Colored edge
PE_BORDER_COLOR
bC
bC
Border color
Rd/Wr 0
544
33
Color number
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
33
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PE_BORDER_ALPHA
bA
bA
Border transparency
Rd/Wr 0
255
255
0 = 100% = transparent
255 = 0% = visible
PE_BORDER_SIZE_H
bH
bH
Border H size
Rd/Wr 0
127
10
Unit = pixels
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
34
Group
Name
PE_BORDER_SIZE_V
PE_OPENING_TRANSITION
CmdResp Description
bV
oT
bV
oT
Border V size
Layer opening transition type
Read / Min Max Default
Values
Write Value value value
Rd/Wr 0
Rd/Wr 0
127
4
10
Unit = pixels
2
0 = Cut
1 = CleanCut
2 = Fade
3 = Slide (associée à 1
trajectoire)
4 = Wipe (associée à 1
trajectoire)
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
35
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PE_OPENING_TRANSITION_WAY
oW oW
Layer opening transition direction Rd/Wr 0
10
0
0 = Left to right
1 = Right to left
2 = Bottom to top
3 = Top to bottom
4 = Vertical from/to center
5 = Horizontal from/to center
6 = H&V rom/to center
7 = From SW to NE
8 = From SE to NW
9 = From NW to SE
10 = From NE to SW
PE_OPENING_DURATION
oD
Layer opening transition duration
255
10
Unit = 1/10s
oD
Rd/Wr 0
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
36
Group
Name
PE_CLOSING_TRANSITION
PE_CLOSING_TRANSITION_WAY
CmdResp Description
cT
cT
cW cW
Layer closing transition type
Layer closing transition direction
Read / Min Max Default
Values
Write Value value value
Rd/Wr 0
Rd/Wr 0
4
10
2
0 = Cut
1 = CleanCut
2 = Fade
3 = Slide (associée à 1
trajectoire)
4 = Wipe (associée à 1
trajectoire)
0
0 = Left to right
1 = Right to left
2 = Bottom to top
3 = Top to bottom
4 = Vertical from/to center
5 = Horizontal from/to center
6 = H&V rom/to center
7 = From SW to NE
8 = From SE to NW
9 = From NW to SE
10 = From NE to SW
Index #1
Index #2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
37
Group
PRESET
CONTROL
Name
CmdResp Description
PE_CLOSING_DURATION
cD
cD
Layer closing transition duration
TAKE
TK
TK
TAKEAVA
TA
TA
TAKE, Next preset becomes
Current
Available TAKE flag
TAKEINFO
TI
TI
TBAR
Read / Min Max Default
Values
Write Value value value
Index #1
Rd/Wr 0
0 = Background
Frame for output
1
1 = Background
0 = Current preset
Frame for output
1 = Next preset
2 in matrix mode
2 = Previous
2 = Background
preset
Layer for output 1
3 = Memory
3 = Pip 1 Layer
Preset 1
for output1
4 = Memory
Background
Preset 2
Layer for output 2
5 = Memory
in matrix mode
Preset 3
6 = Logo 1
6 = Memory
7 = Logo 2
Preset 4
8 = Audio Output
1
9 = Audio Output
2
255
10
Rd/Wr 0
1
0
Rd
0
1
1
TAKE information
Rd
0
2
0
NT NT
TBAR value
Rd/Wr 0
10000 0
COPY_FROM
Nf
Nf
Source for preset copy
Rd/Wr 0
6
0
COPY_TO
Nt
Nt
Destination for preset copy
Rd/Wr 0
6
0
COPY_CTRL
Nc
Nc
Preset copy control
Rd/Wr 0
1
0
Unit = 1/10s
Index #2
0 = 1 shot TAKE
1 = 2 shot TAKE
2 = Sequenced TAKE
Unit = 0,01%
0 = Current preset
1 = Next preset
2 = Previous preset
3 = Memory Preset 1
4 = Memory Preset 2
5 = Memory Preset 3
6 = Memory Preset 4
0 = Current preset
1 = Next preset
2 = Previous preset
3 = Memory Preset 1
4 = Memory Preset 2
5 = Memory Preset 3
6 = Memory Preset 4
Auto reset
38
Group
SETTINGS
Name
CmdResp Description
PREVIEWED_LAYER
NC NC
Previewed layed (layer that is
visible on preview screen)
SET_QUAD_LAYOUT
NQ NQ
Quadravision Layout request
(auto-reset)
R_FLICK
Rf
Rf
Anti-flicker level
R_GAMMA
Rg
Rg
Gamma correction level
R_SHARPNESS
Rs
Rs
Sharpness correction Level
Read / Min Max Default
Values
Index #1
Write Value value value
0 = Background Frame for output
1
1 = Background Frame for output
2 in matrix mode
2 = Background Layer for output
1
3 = Pip 1 Layer for output1
Rd/Wr 0
7
2
Background Layer for output 2 in
matrix mode
6 = Logo 1
7 = Logo 2
8 = Audio Output 1
9 = Audio Output 2
13 = Reset of layer properties
14 = Background Live + Top Left
PiP
15 = Background Live + Top
Right PiP
16 = Background Live + Bottom
Rd/Wr 13
19
0
Left PiP
17 = Background Live + Bottom
Right PiP
18 = Background Frame + 2 Left
Right PiPs
19 = Background Frame + 2 Top
Bottom PiPs
0 = Main output
Rd/Wr 0
7
2
0 = No antif-flicker
1 = Preview
output
0 = Main output
Rd/Wr 5
40
10
Unit = 1/10
1 = Preview
output
0 = Main output
Rd/Wr 0
255
128
128 = neutral
1 = Preview
output
Index #2
39
Group
Name
CmdResp Description
OUTPUT
OFORMAT
OF OF
Output format
Read / Min Max Default
Values
Write Value value value
0 = PAL
1 = NTSC
2 = 480p
3 = 576p
4 = SMPTE296M
5 = SMPTE260M
6 = SMPTE274M
7 = SMPTE274M
8 = SMPTE274M
9 = 640 x 480 4/3
10 = 848 x 480 16/9
11 = 800 x 600 4/3
12 = 1024 x 768 4/3
13 = 1360 x 768 16/9
14 = 1280 x 800 16/9
15 = 1280 x 1024 5/4
16 = 1400 x 1050 5/3
17 = 1680 x 1050 16/9
18 = 1600 x 1200 4/3
Rd/Wr 0
37
0
19 = 1920 x 1200 16/9
20 = 2048 x 1080
21 = 1280 x 720 16/9
22 = 1920 x 1080 16/9
23 = 1920 x 1080 16/9 (HD)
24 = 1920 x 1080 16/9 (SHARP)
25 = 1920 x 1080 16/9 (SHARP
2)
26 = 1440 x 900 16/10
27 = 1280 x 768 15/9
28 = 1366 x 800 15/9
29 = 1366 x 768 16/9
30 = Computer Custom 1
31 = Computer Custom 2
32 = Computer Custom 3
33 = Computer Custom 4
34 = Computer Custom 5
35 = Computer Custom 6
36 = Computer Custom 7
37 = Computer Custom 8
Index #1
Index #2
0 = Main output
1 = Preview
output
40
Group
Name
CmdResp Description
ORATE
OR OR
Output rate
OSIGTYPEANALOG
OA OA
Analog output type
OSIGTYPEDIGITAL
OD OD
Digital output type
OSYNCPOL
OS OS
Analog output sync polarity
Read / Min Max Default
Values
Index #1
Write Value value value
0 = Custom Field Rate
1 = 23,97 Hz
2 = 24 Hz
3 = 25 Hz
4 = 29,97 Hz
0 = Main output
5 = 30 Hz
6 = 50 Hz
1 = Preview
Rd/Wr 0
12
8
7 = 59,94 Hz
output
8 = 60 Hz
9 = 72 Hz
10 = 75 Hz
11 = 85 Hz
12 = 100 Hz
0 = RGBs
0 = Main output
1 = RGsB (SOG)
Rd/Wr 0
3
0
1 = Preview
2 = RGB H&V
output
3 = YUV
0 = RGB 0-255 ( full scale )
0 = Main output
Rd/Wr 0
2
0
1 = RGB 16-235 ( reduced scale ) 1 = Preview
2 = YUV
output
0 = negative H&V synchro
1 = Synchros H négative et V
0 = Main output
positive
Rd/Wr 0
3
0
1 = Preview
2 = Synchros H positive et V
output
négative
3 = Synchros H et V positives
Index #2
41
Group
Read / Min Max Default
Values
Write Value value value
0 = Black
1 = Navy blue
2 = Blue
3 = Green Blue
4 = Water Blue
5 = Turquoise blue
6 = Dark green
7 = Green
8 = Lime
9 = Light green
10 = Dark red
11 = Red
12 = Tomato red
13 = Bordeaux
14 = Brown
15 = Chocolate
Rd/Wr 0
32
0
16 = Orange
17 = Gold
18 = Yellow
19 = Indigo blue
20 = Purple
21 = Light red
22 = Fuchsia
23 = Salmon
24 = Rose
25 = Olive reen
26 = Grey
27 = Silver
28 = Lavender blue
29 = Beige
30 = Azur
31 = White
32 = Custom
Name
CmdResp Description
OBACKCOLORPREDEF
OC OC
Output background pre-defined
color
OBACKCOLORHUE
OG OG
Output background hue
Rd/Wr 0
240
160
OBACKCOLORSAT
OJ
OJ
Output background saturation
Rd/Wr 0
240
0
OBACKCOLORLUMA
OI
OI
Output background brightness
Rd/Wr 0
240
0
Index #1
Index #2
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
42
Group
Read / Min Max Default
Values
Write Value value value
0 = No pattern
1 = Vertical Grey Scale
2 = Horizontal Grey Scale
3 = Vertical Color Bar
Rd/Wr 0
8
0
4 = Horizontal Color Bar
5 = Grid
6 = SMPTE
7 = Burst
8 = Centering
Name
CmdResp Description
OPATTERN
OP OP
Output test pattern
OBLACK
OB OB
Output black control
Rd/Wr 0
1
OUTIL_H
OH OH
Output H size
Rd
0
65535 1600
Unit = pixels
OUTIL_V
OV OV
Output V size
Rd
0
65535 1200
Unit = pixels
OFIELDRATE
OT OT
Output frame frequency
Rd
100
10000 6000
Unit = 1/100Hz
OIMAGE_OVERSCAN
OO OO
Image Overscan / Underscan
Rd/Wr 0
1
0
OSETDETECTHDCP
Oh Oh
Enable/disable the Output HDCP
detection
Rd/Wr 0
4
1
OISHDCP
On On
Output HDCP status
Rd
0
1
0
OSYNCOUTPUT
Om Om
Output 2 copies the format and
rate of output 1
Rd/Wr 0
1
0
REFERENCEREFREQUEST
Xr
Xr
Framelock source requested by
user
Rd/Wr 0
15
0
0
0 = Normal output
1 = Black output
0 = Disable HDCP detection
1 = Automatic HDCP detection
2 = HDCP Configuration 1
3 = HDCP Configuration 2
4 = HDCP Configuration 3
Index #1
Index #2
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Analog input 1 as reference
1 = Analog input 2 as reference
2 = Analog input 3 as reference
3 = Analog input 4 as reference
4 = Analog input 5 as reference
5 = Analog input 6 as reference
8 = DVI 1 input as reference
9 = DVI 2 input as reference
10 = SDI 1 input as reference
11 = SDI 2 input as reference
14 = Back End 1 as reference
15 = Back End 2 as reference
0 = Main output
1 = Preview
output
43
Group
Read / Min Max Default
Values
Write Value value value
0 = Analog input 1 as reference
1 = Analog input 2 as reference
2 = Analog input 3 as reference
3 = Analog input 4 as reference
4 = Analog input 5 as reference
5 = Analog input 6 as reference
Rd/Wr 0
15
0
8 = DVI 1 input as reference
9 = DVI 2 input as reference
10 = SDI 1 input as reference
11 = SDI 2 input as reference
14 = Back End 1 as reference
15 = Back End 2 as reference
0 = Internal
1 = Follow x1/2
2 = Follow x1
Rd/Wr 0
5
0
3 = Follow x2
4 = Follow x3
5 = Asynchronous Follow
0 = Internal
1 = Follow x1/2
2 = Follow x1
Rd/Wr 0
5
0
3 = Follow x2
4 = Follow x3
5 = Asynchronous Follow
Name
CmdResp Description
REFCURRENTREQUEST
Xe
REFMODE
Xm Xm
Follow mode requested by user
REFCURRENTMODE
Xc
Xc
Current follow mode
REFFREQ
Xt
Xt
Frame rate of the reference signal Rd
0
65535 0
Unit = 1/100Hz
REFLOCKSTATUS
Xl
Xl
Framelock locked status
0
1
1 = locked
Xe
Current Frame Lock source
Rd
0
PMODE
PM PM
Picture mode
Rd/Wr 0
5
0
PEXECUTE
PG PG
Picture control
Rd/Wr 0
1
0
LOGOS
FRAMES
Index #1
Index #2
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Main output
1 = Preview
output
0 = Normal mode
1 = Memory recall of logos and
frames
2 = Logo recording mode
3 = Animated logo recording
mode
4 = Frame recording mode
5 = Deleting picture mode
If PMODE = Savexxx => Store
the PCAPTURE_INDEX image
If PMODE = Erasexxx => Delete
the PCAPTURE_INDEX image
Auto reset
44
Group
Read / Min Max Default
Values
Write Value value value
0 = Free
1 = Recalling picture
2 = Storing picture
Picture management status
Rd
0
5
0
3 = Picture format not compliant
with current output format
4 = Deleting a picture
5 = Flash access error
Frames validity (bitfield : bit0 =
0 = No image
Rd
0
255
0
Frame1)
1 = Image is valid
Logos validity (bitfield : bit0 =
0 = No image
Rd
0
511
0
Logo1)
1 = Image is valid
Select the output that will be used
0 = Main output
Rd/Wr 0
1
0
for capture
1 = Preview output
Picture capture H position
Rd/Wr 32768 65535 32768 Unit = pixels
Picture capture V position
Rd/Wr 32768 65535 32768 Unit = pixels
Picture capture H size
Rd/Wr 0
32767 400
Unit = pixels
Picture capture V size
Rd/Wr 0
32767 300
Unit = pixels
0 = No keying
1 = Luma Key Keying
Picture Keying Type
Rd/Wr 0
2
0
2 = ChromaKey Keying
3 = Luma Key Keying + DSK
4 = ChromaKey Keying + DSK
Picture Keying Level (Red or Tint) Rd/Wr 0
255
128
Picture Keying Level (Green)
Rd/Wr 0
255
128
Picture Keying Level (Blue)
Rd/Wr 0
255
128
Keing Tolerance
Rd/Wr 0
255
10
Minimum Luma Level
Rd/Wr 0
255
64
Maximum Luma Level
Rd/Wr 0
255
192
Keying Invert
Rd/Wr 0
1
0
0 = Disable the grabber
Keying Grabber Activate
Rd/Wr 0
1
0
1 = Enable the grabber
Keying update (capture and apply
Rd/Wr 0
1
0
Percent of OSCREEN_UTIL_H
new value)
Keying grabber position H
Rd/Wr 0
65535 32768 Percent of OSCREEN_UTIL_V
Keying grabber position V
Rd/Wr 0
65535 32768 Auto reset
Cutout color for picture capture
Rd/Wr 0
7
0
0 to 7
0 = 0s
Capture time for an animated logo Rd/Wr 0
100
0
100 = 10s
Maximal number of frames of an
Rd
1
255
80
1 à 255
animated logo
Name
CmdResp Description
PSTATUS
PE PE
PFRAMES_VALID
PF
PF
PLOGOS_VALID
PZ
PZ
PCAPTURE_ORIGIN
PS PS
PCAPTURE_LEFT
PCAPTURE_TOP
PCAPTURE_WIDTH
PCAPTURE_HEIGHT
PL
PT
PW
PH
PCAPTURE_KEYING_TYPE
PB PB
PCAPTURE_KEYING_R_LEVEL
PC
PCAPTURE_KEYING_G_LEVEL
PD
PCAPTURE_KEYING_B_LEVEL
PJ
PCAPTURE_KEYING_TOLER
PK
PCAPTURE_KEYING_LUMA_LOW_LEVEL PP
PCAPTURE_KEYING_LUMA_HIGH_LEVEL PY
PCAPTURE_KEYING_INVERT
PO
PCAPTURE_KEYING_GRAB_ENABLE
PL
PT
PW
PH
PC
PD
PJ
PK
PP
PY
PO
PQ PQ
PCAPTURE_KEYING_GRAB_GET
PR PR
PCAPTURE_KEYING_GRAB_H
PCAPTURE_KEYING_GRAB_V
PCAPTURE_BACK_COLOR
PU PU
PV PV
Pc Pc
PCAPTURE_CAPTURE_TIME
Pt
PCAPTURE_MAX_FRAME
Pm Pm
PCAPTURE_FRAME_COUNT
PN PN
PCAPTURE_REFRESH_INTERVAL
PI
Pt
PI
Number of frames of an animated
Rd/Wr 1
logo
Time between 2 frames of an
Rd/Wr 1
animated logo
255
Index #1
Index #2
1
10000 56
Unit = 1ms
45
Group
Name
CmdResp Description
PCAPTURE_INDEX
PX PX
ID of the picture to capture
Read / Min Max Default
Values
Write Value value value
0 = No Picture
1 = Logo 1
2 = Logo 2
3 = Logo 3
4 = Logo 4
5 = Logo 5
6 = Logo 6
Rd/Wr 0
14
0
9 = Frame 1
10 = Frame 2
11 = Frame 3
12 = Frame 4
13 = Frame 5
14 = Frame 6
PSTATUS_WIDTH
Pw Pw
Picture H size
Rd
0
32767 0
PSTATUS_HEIGHT
Ph
Picture V size
Rd
0
32767 0
Ph
Index #1
Index #2
1 = Logo 1
2 = Logo 2
3 = Logo 3
4 = Logo 4
5 = Logo 5
6 = Logo 6
9 = Frame 1
10 = Frame 2
11 = Frame 3
12 = Frame 4
13 = Frame 5
14 = Frame 6
1 = Logo 1
2 = Logo 2
3 = Logo 3
4 = Logo 4
5 = Logo 5
6 = Logo 6
9 = Frame 1
10 = Frame 2
11 = Frame 3
12 = Frame 4
13 = Frame 5
14 = Frame 6
46
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
PSTATUS_STYLE
Ps
Ps
Logo style
Rd
0
2
0
PSTATUS_FRAME_COUNT
Pn
Pn
Number of frames of an animated
Rd
logo
1
255
1
PSTATUS_REFRESH_INTERVAL
Pi
Pi
Time between 2 frames of an
animated logo
Rd/Wr 1
10000 56
LANENABLE
ne
ne
LAN enable
Rd/Wr 0
1
0
LANRESET
LANSTORE
nr
ns
nr
ns
LAN factory parameters reset
LAN parameters update
Rd/Wr 0
Rd/Wr 0
1
1
0
0
LAN
0 = Normal logo
2 = Frame
Unit = 1ms
Index #1
Index #2
1 = Logo 1
2 = Logo 2
3 = Logo 3
4 = Logo 4
5 = Logo 5
6 = Logo 6
9 = Frame 1
10 = Frame 2
11 = Frame 3
12 = Frame 4
13 = Frame 5
14 = Frame 6
1 = Logo 1
2 = Logo 2
3 = Logo 3
4 = Logo 4
5 = Logo 5
6 = Logo 6
9 = Frame 1
10 = Frame 2
11 = Frame 3
12 = Frame 4
13 = Frame 5
14 = Frame 6
1 = Logo 1
2 = Logo 2
3 = Logo 3
4 = Logo 4
5 = Logo 5
6 = Logo 6
9 = Frame 1
10 = Frame 2
11 = Frame 3
12 = Frame 4
13 = Frame 5
14 = Frame 6
0 = Enable RS232 ( disable LAN )
1 = Enable LAN ( disable
RS232 )
Auto reset
Auto reset
47
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
LANIP
nw
nw
LAN devices addresses
Rd/Wr 0
255
192
LANPORT
np
np
LAN port numbers
Rd/Wr 0
65535 10500
LANNETMASK
nk
nk
LAN netmask
Rd/Wr 0
24
8
LANPROTOCOL
nt
nt
LAN protocol
Rd/Wr 0
1
1
EDID_FORMAT
EF
EF
EDID preferred format
Rd/Wr 0
21
0
EDID
EDID_RATE
ER ER
EDID preferred frame frequency
Rd/Wr 0
5
0
Index #1
Index #2
IP : 0 to 255
0 = Device
1 = Remote
2 = Gateway
0 = IP address
high byte
1 = IP address
mid high byte
2 = IP address
mid low high byte
3 = IP address
low byte
Local port : 10000 à 10999
Remote port : 0 à 65500
0 = Device
1 = Remote
2 = Gateway
Number of 0bits from the right
0 = UDP Protocol
1 = TCP protocol
2 = AMX Protocol
0 = VGA
1 = 800x480
2 = WVGA
3 = SVGA
4 = 720pRGB
5 = XGA
6 = WXGA
7 = SWXGA
8 = 800pRGB
9 = 1152x864
10 = 900pRGB
11 = 1600x900
12 = 960pRGB
13 = SXGA
14 = 1360x1024
15 = SXGA+
16 = WSXGA+
17 = 1080pRGB
18 = 2K
19 = UXGA
20 = WUXGA
21 = Custom
0 = 50 Hz
1 = 60 Hz
2 = 72 Hz
3 = 75 Hz
4 = 85 Hz
5 = Custom
0 = Analog input
1
1 = Analog input
2
3 = DVI-D input 1
4 = DVI-D input 2
0 = Analog input
1
1 = Analog input
2
3 = DVI-D input 1
4 = DVI-D input 2
48
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
EDID_REQUEST
ES ES
Request for an EDID
Rd/Wr 0
2
0
AUDIO_INPUT_MODE
Af
Audio mode
Rd/Wr 0
1
1
AUDIO_INPUT_MAP
Ai
Af
Ai
Audio input map
Rd/Wr 0
12
1
0 = EDID is ready
1 = EDID saving
2 = EDID reading
0 = Free choice of audio input
1 = Audio input follow the top
layers
0 = No input
1 = Input1
2 = Input2
3 = Input3
4 = Input4
5 = Input5
6 = Input6
9 = Input9
10 = Input10
11 = Input11
12 = Input12
AUDIO_LEVEL
AL
AL
Audio input level
Rd/Wr 0
255
45
Linear scale, init value is 0 dB
AUDIO_AUX_LEVEL
Al
Al
Audio auxiliary input level
Rd/Wr 0
255
45
Linear scale, init value is 0 dB
AUDIO
AUDIO_BALANCE
Ab
AUDIO_AUX_BALANCE
AUDIO_MUTE
Ab
Audio input balance
Rd/Wr 0
90
45
AB AB
Audio auxiliary input balance
Rd/Wr 0
90
45
Au
Audio output Mute control
Rd/Wr 0
1
0
Au
Index #1
Index #2
0 = Analog input
1
1 = Analog input
2
3 = DVI-D input 1
4 = DVI-D input 2
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
4 = Input5
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = Input1
1 = Input2
2 = Input3
3 = Input4
0 = max to the left, 45 = centered, 4 = Input5
90 = max to the right
5 = Input6
8 = Input9
9 = Input10
10 = Input11
11 = Input12
0 = max to the left, 45 = centered,
90 = max to the right
0 = Main output
1 = Mute.
1 = Preview
output
49
Group
Name
CmdResp Description
Read / Min Max Default
Values
Write Value value value
AUDIO_MASTER_VOLUME
AV AV
Output Master volume
Rd/Wr 0
255
255
AUDIO_MODE
Am Am
Audio stero mode
Rd/Wr 0
1
1
AUDIO_DELAY
AD AD
Delay between audio and video
Rd/Wr 0
80
0
AUDIO_AUTO_DELAY
Ae
Ae
Automatic audio delay
Rd/Wr 0
1
1
AUDIO_SDI_CHAN_LEFT
Ac
Ac
ID of the Sdi channel to desembed
Rd/Wr 0
for left channel
15
0
AUDIO_SDI_CHAN_RIGHT
AC AC
ID of the Sdi channel to desembed
Rd/Wr 0
for right channel
15
1
Index #1
Index #2
0 = Main output
0 = mute, 32 = -18dB , 255 = 0dB 1 = Preview
output
0 = Main output
0 = mono
1 = Preview
1 = Stereo
output
0 = Main output
0 = no delay
1 = Preview
500ms = max delay
output
0 = réglage manuel du Delay, 1 =
reglage automatique du delay
0 = Group A – Channel 1
1 = Group A – Channel 2
2 = Group A – Channel 3
3 = Group A – Channel 4
4 = Group B – Channel 1
10 = Channel 11
5 = Group B – Channel 2
– SDI 1
11 = Channel 11
6 = Group B – Channel 3
7 = Group B – Channel 4
– SDI 2
8 = Group C – Channel 1
12 = Channel 11
9 = Group C – Channel 2
– SDI 3
10 = Group C – Channel 3
13 = Channel 12
11 = Group C – Channel 4
– SDI 4
12 = Group D – Channel 1
13 = Group D – Channel 2
14 = Group D – Channel 3
15 = Group D – Channel 4
0 = Group A – Channel 1
1 = Group A – Channel 2
2 = Group A – Channel 3
3 = Group A – Channel 4
4 = Group B – Channel 1
10 = Channel 11
5 = Group B – Channel 2
– SDI 1
6 = Group B – Channel 3
11 = Channel 11
7 = Group B – Channel 4
– SDI 2
12 = Channel 11
8 = Group C – Channel 1
9 = Group C – Channel 2
– SDI 3
10 = Group C – Channel 3
13 = Channel 12
11 = Group C – Channel 4
– SDI 4
12 = Group D – Channel 1
13 = Group D – Channel 2
14 = Group D – Channel 3
15 = Group D – Channel 4
50
Group
Name
AUDIO_DESEMBEND_LOCKED
CmdResp Description
As
As
Information of audio channel
presence for SDI inputs
Read / Min Max Default
Values
Write Value value value
Index #1
Rd
10 = Channel 11
– SDI 1
11 = Channel 11
– SDI 2
12 = Channel 11
– SDI 3
13 = Channel 12
– SDI 4
0
1
1
1 : Locked
Index #2
51
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement