KWorld KW-SA260, KW-SA260RX, KW-SA260TX User Manual

Add to my manuals
13 Pages

advertisement

KWorld KW-SA260, KW-SA260RX, KW-SA260TX User Manual | Manualzz

PlusTV MediaSender Wireless User’s Manual

About This Guide

This User’s Manual is for specific product, and all its contents are processed with due care but are not ensured fully correct.

We assume no responsibility for any loss arising from use of this manual.

The right to interpret all contents of this User’s Guide belongs to the company

The manual is subject to change without notice.

This User’s Manual is not authorized to any party and no reproduction or copy, in part or whole, of the manual in any way is permitted.

KWorld Website: www.kworld.com.tw

- 1 -

KWorld Computer Co., Ltd

Table of Contents

About This Guide....................................................................................................... 1

 

Table of Contents .................................................................................................... 2

 

Instruction .................................................................................................................. 3

 

1.1

 

Functions and features ........................................................................ 3

 

1.2

 

Product Appilcation .............................................................................. 4

 

1.3

 

Packaged contents .............................................................................. 4

 

1.4

 

Technical specifications ....................................................................... 4

 

Hardware and Installation Instruction ........................................................................ 5

 

2.1

 

Emitter (KW-SA260TX) Keys and Back Panel Instructions ................. 5

 

2.2

 

Receiver (KW-SA260RX) Keys and Back Panel Instructions .............. 5

 

2.3

 

Position for Emitter (KW-SA260TX) .................................................... 6

 

2.4

 

Position for Transceiver (KW-SA260RX) ............................................. 7

 

2.5

 

Position for antenna ............................................................................. 8

 

Operation Manual ...................................................................................................... 9

 

3.1

 

Signal channel selection ...................................................................... 9

 

3.2

 

Power switch ....................................................................................... 9

 

3.3

 

Channel Selection ............................................................................. 10

 

3.4

 

Remote Return Function Operation .................................................... 11

 

FAQ and Troubleshooting Methods ........................................................................ 12

 

Thank you for buying KWorld’s PLUSTV MediaSender Wireless

For better use of the product, please read this User’s Manual carefully before use.

- 2 -

PlusTV MediaSender Wireless User’s Manual

Instruction

KW-SA260 wireless A/V transceiver consists of emitter (KW-SA260TX) and receiver

(KW-SA260RX). It adopts advanced 2.4GHz wireless transmission technology, with strong anti-interference and mobility. When used in conjunction with set-top box,

DVD, VCD and etc, it can be installed easily, subject to no space impedance and without any use of wire connection. It can make audio and video transmitting easily available in every room at home, letting you enjoy HIFI audio and video freely at every corner at home.

1.1 Functions and features

z Use of 2.4GHz ISM channel z

Four set of transmitting channel can be selected for use, improving feasibility and reliability z

Emitter and receiver are used in match within the same channel, also one-to-many, and many-to-many are available z Compatible with AV output equipments such as video recorder, video camera, digital camera, z digital set-top box z 433MHz infrared remote returning transmission, fully compatible with remote control as z DVD/VCD/digital et-top box z

Strong infrared emission, without need of installing infrared emission extension cord z

Received image is clear and stable, bright color, articulate sound without noises z

Support NTSC/PAL system video and stereophonic audio transmission z Complete hardware design, with no need of installing software, Plug and Play, easy and convenient

- 3 -

KWorld Computer Co., Ltd

1.2 Product Appilcation

A/V to A/V wireless transmission, can be used when many televisions share a

DVD/VCD or digital television set-top box and etc. Video conference system in large conference room, and multimedia room teaching. External connected monitoring camera head, real-time on-spot image monitoring, can be used in security systems.

Building and industry monitoring system, long-distance manual monitoring children and patient in patient wards. Audio and video transmitting places where construction is difficult or cost is high.

1.3 Packaged contents

KW-SA260TX 1 PC

Power adapter (DV5V/1000mA)

AV cable

MMI AV cable

User Manual

1.4 Technical specifications

Power input: DC 5V--200mA

Video input: RCA (NTSC/ PAL)

Audio input (RCA)

Video output: RCA (NTSC/PAL)

Audio output RCA

- 4 -

2 PC

2 PC

1 PC

1 PC

PlusTV MediaSender Wireless User’s Manual

Hardware and Installation Instruction

2.1 Emitter (KW-SA260TX) Keys and Back Panel Instructions

2.2 Receiver (KW-SA260RX) Keys and Back Panel Instructions

- 5 -

KWorld Computer Co., Ltd

2.3 Position for Emitter (KW-SA260TX)

In order to ensure normal transmission of infrared signal, please place emitter

(KW-SA260TX) following below two methods. c Use infrared emitting equipment at the front of emitter: place emitter on V/A equipments, and extend infrared emitting window 2-3cm or the

DVD Player & KW-SA260TX front infrared face to face, pointing to infrared receiving window of V/A equipments.

*** extend infrared emitting window 2-3cm ***

*** DVD Player & KW-SA260TX front infrared face to face ***

Cozy tips:

There are usually words like "infrared remote" or "IR" on the infrared remote receiving window of set-top box (STB) or DVD, please point emitter's infrared emitting window to it.

There are infrared emitting windows at the front and back of KW-SA260TX, see picture:

- 6 -

PlusTV MediaSender Wireless User’s Manual d Use infrared emitting equipment at the back of emitter: place emitter in front of V/A equipments, and point infrared emitting window on the back of the emitter to infrared receiving window of V/A equipments. And ensure there are no barriers between them.

Cozy tips:

To ensure optimal use effect, this positioning method is suggested when condition allows.

2.4 Position for Transceiver (KW-SA260RX)

Please place transceiver (KW-SA260RX) beside the TV set, turn it on and connect

AV wire according to relative color (yellow, white and red).

- 7 -

KWorld Computer Co., Ltd

2.5 Position for antenna

Please pay attention to the position of 433MHz antenna, ensuring there is no barriers around the antenna. Especially pay attention to the metal, which will greatly influence transmission of infrared returning signal. Please straighten antenna and locate it according to following ways.

Cozy tips:

The 2.4GHz antenna and 433MHz antenna of transceiver and emitter shall be correctly placed, or it is easy to inference normal transmission of signal.

- 8 -

PlusTV MediaSender Wireless User’s Manual

Operation Manual

3.1 Signal channel selection

AV1/AV2 can be switched freely by pressing information source button to freely switch (see hardware introduction for AV1/AV2 input port description), and the signal can be normally transmitted only when transceivers are in the same channel. When you switch AV1/AV2 at transceiver (KW-SA260RX), emitter (KW-SA260TX) will automatically switch signal channel according to your operation.

The situation of panel indicator light is as follows:

3.2 Pow er switch

Press to connect or cut off power of 2.4GHz emitter or transceiver, switching its operation mode of transmission or non-transmission signal. The panel indicator light of switch flash as follows:

- 9 -

3.3 Channel Selection

Four 2.4GHz transmission channels can be switched freely by pushing on channel switch channel button. But only when the transceiver is in the same channel can video signals be transmitted normally. Panel indicator light for each channel selection mode goes like following:

Cozy tips:

When wireless local area network (LAN) (802.11 or equipment named as Wifi), please select

Channel one or four, which can avoid signal interference by wireless local area network

(LAN)

PlusTV MediaSender Wireless User’s Manual

3.4 Remote Return Function Operation

KW-SA260 wireless V/A transceiver have no specified remote, but have remote return function. When emitting source is video program such as set-top box (STB) ,

DVD, video camera with remote function, remoter incorporated in the equipme nt can be used directly on the side of KW-S A260 receiver (KW-SA260RX), without the need of operating on the signal source end (front of V/A equipment).

Step one:

Refer to connecting installation picture, connect emitter (KW-SA260TX), and confirm there are no barriers between emitter's infrared window and infrared receiving w indow of program source.

Step two:

When enjoying programs from receiver (KW-SA260RX), point remoter to remote receiving window of the receiver, then can remote control V/A equipments on the side of emitting end, which is easy and convenient for operation

Cozy tips:

Please pull 433 MHz receiving and emitting antenna of emitter and receiver as straight as possible, and away from audio and video connecting lines, to ensure no interference to signal transmission. In case of infrared remote malfunction, please check antenna's position on the condition that there is no positioning problem with the transceiver.

- 11 -

KWorld Computer Co., Ltd

FAQ and Troubleshooting Methods

z

Indicator does not light and there are no image

1. Check whether power of transceiver is connected.

2. Change receiver's transmitting channel (refer to operation manual/Channel switch).

3. Adjust transceiver's position (refer to hardware and installation in struction). z Remote returning malfunction

1. Check whether emitter's connecting installation is correct (refer to hardware and installation instruction).

2. Please adjust transceiver's antenna and position (refer to position for a ntenna). z

Image is interfered

1. Change receiver's transmitting channel (refer to Channel selection).

2. Please adjust transceiver's position (refer to hardware a nd installation instruction)

- 12 -

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals