KWorld DVB-T 100 Installation Manual

Add to My manuals
8 Pages

advertisement

KWorld DVB-T 100 Installation Manual | Manualzz

DVB-T 100 Installation Manual

Contents

V2.0

Chapter 1 : DVB-T 100 PCI Hardware Installation........................................................................................... 2

1.1 Package Contents ................................................................................................................................. 2

1.2 System Requirements........................................................................................................................... 2

1.3 Hardware Installation ........................................................................................................................... 2

Chapter 2 : DVB-T 100 Utilities And Drivers Setup ......................................................................................... 3

Chapter 3 : DVB-T PLUS Software Installation................................................................................................ 5

Chapter 4 : DVB-T PLUS Software Functions.................................................................................................. 7

Chapter 5 : FAQ ................................................................................................................................................. 8

1. How to check to see if DVB-T 100 Utilities have been installed? .................................................... 8

2. How to check if the drivers have been installed successfully or not?................................................ 8

Note: For multi language installation manual, please install Adobe Acrobat Reader from autorun after inserting the CD into the CD ROM. Click “Browse” and open Installation Manual file where multi language installation manuals are in.

1

Chapter 1 : DVB-T 100 PCI Hardware Installation

1.1 Package Contents

Unpack your DVB-T 100 package and make sure that all items are included. The following items should be included in your package:

DVB-T 100 PCI card

Remote control & remote sensor

DVB-T Antenna

DVB-T PLUS user manual

Installation manual

Installation CD

1.2 System Requirements

PC with Pentium-IV 1.6GHz or above

256MB RAM of system memory or above

PCI 2.2 compliant slot

Graphics card (Must support DirectX 9.0)

Sound card (AC97 compatible sound card)

1GB free HD space

CD-ROM drive (For software installation)

Microsoft Windows ® 2000/XP

UHF/VHF antenna and available DVB-T signal in your region

1.3 Hardware Installation

Please follow the steps shown on the right for installation of your TV Card and follow the pictorial guide below for peripheral connections.

1.

Turn off all your computer power and any peripherals.

2.

Select an available PCI slot and remove the slot cover, screw, etc.

3.

Push the TV card firmly into the slot until it snaps in place and secure the card by replacing the screw you remove from step

2.

4.

Place the PC lid cover back then power on.

2

Chapter 2 : DVB-T 100 Utilities And Drivers Setup

The DVB-T 100 package comes with complete Windows software utilities. These utilities can be found on the installation CD included in the package. Before installation, we recommend that you exit all background programs. These include applications such as anti-virus software and system monitoring applications.

1.

Once you finish the hardware installation, restart your system. “Windows Found New Hardware Wizard” will pop up. Please click “ Cancel ” and run the utilities setup included in the CD.

2.

Choose “DVB-T 100 PCI” from the autorun page like the one on the left.

3.

Click “ Install Driver ” to install drivers and utilities.

4.

The DVB-T 100 setup utilities will guide you to install all TV card drivers and utilities on your PC. Click

“ Next ” to continue.

3

5.

The utilities will help you install the TV card drivers automatically. Please click “ Next ” to install the drivers.

6.

Please click “ Start ” to start installing the DVB-T

100 BDA Driver.

7.

Choose “ Yes, I want to restart my computer now ” and click “ Finish ” to restart your computer and activate the driver.

Note:

You can restart your computer after installing DVB-T PLUS software application

4

Chapter 3 : DVB-T PLUS Software Installation

After the drivers are installed, the next step you need to do is to install “ DVB-T PLUS ”. Please follow the steps below to install it.

1.

Choose DVB-T 100 PCI from the autorun page like the one on the left.

2.

Select “ DVB-T PLUS ” to start installing the software.

3.

The InstallShield Wizard will guide through installation of

DVB-T PLUS application. Click “ Next ” to continue.

4.

Please choose the destination folder where you want to install the files. You can click “ Browse ” to change the destination folder.

5

5.

Setup will add program icons to the Program Folder’s list.

You may type a new folder name, or select one from the existing folders list. Click “ Next ” to start installing. Please wait while installation in process.

6.

When the message as the one on the left pops up, click

“ Finish ” to end the installation.

6

Chapter 4 : DVB-T PLUS Software Functions

When using DVB-T PLUS, There are four different functions to choose from. Picture below is an example of how the interface looks like and a short description of each function.

• DTVR : DTVR turns your PC into a full-featured video recorder.

• MPEG Encoder : MPEG Encoder converts

AVI files into MPEG format.

• Video Editor : Video Editor makes editing

MPEG video files easy.

• Burn DVD : Burn DVD creates VCD,

SVCD and DVD that can be played on a PC or

DVD player.

Note: For more detailed descriptions, please refer to DVB-T PLUS user manual.

7

Chapter 5 : FAQ

1.

How to check to see if DVB-T 100 Utilities have been installed?

Ans : To check the DVB-T 100 Utilities, follow the pictorial guide below and choose “ Remote Control ” to change system settings.

Fig.1

2.

How to check if the drivers have been installed successfully or not?

Ans: Right click on “ My Computer ” on the desktop and choose “ Properties ”. Once in “Properties” window, click on “ Device Manager ” in Hardware panel. Click on the plus icon of “Sound, video and game controllers” to open the device list.

Fig. 2

8

advertisement

Related manuals

advertisement