Frigidaire FGBC5334VS Manual

Frigidaire FGBC5334VS Manual
All about the
Use & Care
of your
Beverage Center
TA B L E O F C O N T E N T S
Temperature Controls..................................9
Features.....................................................4
Care and Cleaning.....................................10
Installation.................................................5
Before You Call.........................................11
Energy Saving Tips......................................8
Major Appliance Warranty..........................14
www.frigidaire.com USA 1-800-944-9044
www.frigidaire.ca Canada 1-800-265-8352
A15600302 (December 2018)
Important Safety Instructions.......................2
IMPORTANT SAFETY INSTRUCTIONS
Read and Save These
Instructions
Definitions
This is the safety alert symbol. It is
This Owner’s Guide provides specific operating used to alert you to potential personal injury
instructions for your model. Use your Beverage hazards. Obey all safety messages that follow
this symbol to avoid possible injury or death.
Center only as instructed in this guide. These
instructions are not meant to cover every
possible condition and situation that may occur.
Common sense and caution must be practiced
DANGER
when installing, operating, and maintaining
any appliance.
DANGER indicates an imminently hazardous
situation which, if not avoided, will result in
Record Your Model and Serial
death or serious injury.
Numbers
Record the model and serial numbers in
the space provided below. The serial plate
is located on the upper left wall inside the
cabinet.
Model Number:
Serial Number:
WARNING
WARNING indicates a potentially hazardous
situation which, if not avoided, could result
in death or serious injury.
Purchase Date:
WARNING
For Your Safety
Do not store or use gasoline, or other
flammable vapors and liquids in the vicinity
of this or any other appliance. Read product
labels for flammability and other warnings.
WARNING
Please read all instructions before using this
Beverage Center.
DANGER
DANGER Risk of fire or explosion.
Flammable refrigerant used. Do not use
mechanical devices to defrost refrigerator.
Do not puncture refrigerant tubing.
DANGER Risk of fire or explosion.
Flammable refrigerant used. To be repaired
only by trained service personnel. Do not
puncture refrigerant tubing.
CAUTION
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
IMPORTANT
IMPORTANT indicates installation, operation
or maintenance information which is
important but not hazard-related.
CAUTION
CAUTION Risk of fire or explosion.
Flammable refrigerant used. Consult repair
manual/owner’s guide before attempting to
service this product. All safety precautions
must be followed.
CAUTION Risk of fire or explosion. Dispose of
property in accordance with federal or local
regulations. Flammable refrigerant used.
CAUTION Risk of fire or explosion due
to puncture of refrigerant tubing. Follow
handling instructions carefully. Flammable
refrigerant used.
2
IMPORTANT SAFETY INSTRUCTIONS
Electrical Information
• The Beverage Center must be plugged
into its own dedicated 115 Volt,
60 Hz., 15 Amp, AC only electrical
outlet. The power cord of the appliance
is equipped with a three-prong grounding
plug for your protection against electrical
shock hazards. It must be plugged
directly into a properly grounded three
prong receptacle. The receptacle must be
installed in accordance with local codes and
ordinances. Consult a qualified electrician.
Avoid connecting refrigerator to a Ground
Fault Interrupter (GFI) circuit. Do not use
an extension cord or adapter plug.
• If the power cord is damaged, it should
be replaced by an authorized service
technician to prevent any risk.
• Never unplug the appliance by pulling on
the power cord. Always grip the plug firmly,
and pull straight out from the receptacle to
prevent damaging the power cord.
• Unplug the appliance before cleaning
and before replacing a light bulb to avoid
electrical shock.
• Performance may be affected if the voltage
varies by 10% or more. Operating the unit
with insufficient power can damage the
compressor. Such damage is not covered
under your warranty.
• Do not plug the appliance into an electrical
outlet controlled by a wall switch or pull
cord to prevent the appliance from being
turned off accidentally.
Grounding type wall receptacle
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
Child Safety
• Destroy carton, plastic bags, and any
exterior wrapping material immediately
after the Beverage Center is unpacked.
Children should never use these items
to play. Cartons covered with rugs,
bedspreads, plastic sheets or stretch wrap
may become airtight chambers, and can
quickly cause suffocation.
• Remove all staples from the carton.
Staples can cause severe cuts, and destroy
finishes if they come in contact with other
appliances or furniture.
• An empty, discarded appliance is a very
dangerous attraction to children.
• Remove the door(s) of any appliance that
is not in use, even if it is being discarded.
Proper Disposal of your Beverage
Center
Risk of child entrapment
Child entrapment and suffocation are not
problems of the past. Junked or abandoned
appliances are still dangerous – even if they
will sit for “just a few days”. If you are getting
rid of your old appliance, please follow the
instructions below to help prevent accidents.
We strongly encourage responsible appliance
recycling/disposal methods. Check with your utility
company or visit www.recyclemyoldfridge.com for
more information on recycling your old appliance.
Before you throw away your old
Beverage Center:
• Remove doors.
• Leave shelves in place so children may not
easily climb inside.
• Have refrigerant removed by a qualified
service technician.
Power cord with
3-prong grounded plug
3
FEATURES
Handle
Control Panel
Glass shelves
Glass door
Light switch
Adjustable legs
Interior Light (Some models)
The light comes on automatically when the door is opened. The light can also be turned on and
off by pressing the “Light” button on the control panel. Press the button twice to keep the light
on when the door is closed.
Adjustable Interior Shelves
Multi-position adjustable interior shelves can be moved to any position for larger or smaller
packages. The shipping spacers that stabilize the shelves for shipping should be removed and
discarded. The Beverage Center comes equipped with three glass shelves.
4
INSTALLATION
This Use & Care Guide provides general
operating instructions for your model. Use
the appliance only as instructed in this Use &
Care Guide. Before starting the appliance,
follow these important first steps.
Location
Cleaning
• Wash any removable parts of the Beverage
Center interior, and exterior with mild
detergent and warm water. Wipe dry. Do
not use harsh cleaners on these surfaces.
� Handle
• Do not use razor blades or other sharp
instruments, which can scratch the
appliance surface when removing adhesive
� Glass
Door Any glue left from the tape can be
labels.
removed
� Control
Switch of with
Lamp a mixture of warm water and
• For optimal performance, it is
mild detergent,
or touch the residue with
� Adjustable
Leg
recommended that you install the appliance
the sticky side of tape already removed. Do
where the ambient temperature is between Placement
not remove
serial plate.
of Wine the
Cooler
70 and 78 degrees Fahrenheit.
The
wine cooler should
be placed in dry
ventilated
Important
Safeguards:
Doandnot
storeroom.
foodThe
inlocation
• Allow space around the unit for good air
your
as interior
temperature
the
wineBeverage
cooler shouldCenter
not be irradiated
by direct
sunshine. The wine cool
circulation. Leave a 2 inch space on the
may be
not
get cool enough to prevent spoilage.
far away from heating sources, such as: cooking stove or heatin
back and sides of the Beverage Center for should
In summer months or areas of high humidity,
radiator. If the wine cooler has to be placed near heating source, please ado
adequate circulation.
the glass door may build up moisture. To
proper
heating
insulation
board for
insulation
or keep the wine cooler at lea
remove
the
moisture,
wipe
it away.
• Be sure the appliance stays in the upright
the following minimum distances away from the heating sources:
position during transport.
• Choose a place that is near a grounded
electrical outlet. Do Not use an extension
cord or an adapter plug.
• Keep the appliance from any hazardous or
combustible agents.

NOTE
The exterior walls of the Beverage Center
may become quite warm as the compressor
works to transfer heat from the inside.
Temperatures as much as 30°F warmer
than room temperature can be expected.
For this reason it is particularly important in
hotter climates to allow enough space for air
circulation around your appliance.
Leveling
The Beverage Center must have all bottom
corners resting firmly on solid floor. The floor
must be strong enough to support a fully
loaded Beverage Center. NOTE: It is very
important for your appliance to be level in
order to function properly. If the appliance is
not leveled during installation, the door may
be misaligned and not close or seal properly,
causing cooling, frost, or moisture problems.
② Wooden Shelf Made of Beech
③ Control Panel
Handle Installation
For electric stove: 3 ㎝.
For1.oil or
coal stove:
30 ㎝.over
Place
handle
the two mounting studs
locatedofatDoor
topHinge
of door.
Replacement
2.doorUse
hex
head
driver
or Allenbetween
wrench
The
hinges
of this
winescrew
cooler can
be interchanged
the left and
right sides.
to tighten set screws from bottom to
secure
Installation
of handle
Handle
to door.
1. Set the handle on the fixation shaft.
Fixation Shaft of Handl
Mounting stud
Set Handle
Locate handle
Set screws
2. Screw down the fixation pins of the handle with screw driver.
-7-
To Level Your Beverage Center:
After removing all interior and exterior
packaging materials, use a carpenter’s level to
level the Beverage Center from front-to-back.
Adjust the leveling legs in front, ½ bubble
higher, so that the door closes easily when left
halfway open.
5
INSTALLATION
Reversing the door swing
The glass door can be opened from left to right
and vice versa. Should you desire to change the
opening direction, please follow these instructions.

2. Carefully grasp top of door, tilt it forward
slightly to clear hinge, then lift the door
up off of bottom hinge and place it on a
padded surface to prevent scratching it.
(See Figure 2.)
NOTE
Door reversal is not available for a unit
with control panel on door. The following
operation is only for a unit with control
panel inside the cabinet.
Remarks: These instructions are based on a
unit with right hinge installed already.
To reverse the door from right hinge to left
hinge, you will need the extra hinge kit that
comes packed inside the unit.
Save all removed parts in case of door re-reversal.
1. Using a Phillips screwdriver, remove the
top hinge pin at the top right corner of
door. (See Figure 1.)
Figure 2
Hinge Pin
Figure 1
Top Hinge
3. Remove the three screws that hold
the upper right hinge to the top of the
cabinet. (See Figure 3.)
Upper
Right Hinge
Figure 3
4. Remove the three button plugs from
the upper left corner of the cabinet and
transfer them to the holes on the opposite
side. Be sure to press the button plugs
firmly into the holes. Remove screws from
each side of toe grille, transfer the plastic
grille insert to the gap on the opposite
side and lay toe grille flat on floor in front
of unit. (See Figure 4.)
6
INSTALLATION
7. Unscrew hinge pin from bottom hinge and
transfer to threaded hole on opposite side.
(See Figure 7.) Reinstall bottom hinge in
left hand corner of cabinet using same
three screws removed in Step 6.
Button Plugs (3 pcs)
Pin
Plastic
Grille
Insert
Screws
Hinge
Figure 7
Transfer the plastic grille insert to
the gap on the opposite side.
Figure 4
5. Install new left hand top hinge
(prepackaged inside unit) at the left hand
cabinet corner. (See Figure 5.)
Upper Left Hinge
8. On bottom edge of door, transfer door
stop bracket and bushing to holes on
opposite side. (See Figure 8.)
Step 8:Remove the
andscrew
the block
,then set them on the left side.(see
chart 3)
⑦
Stop
⑧
Bracket
⑥
Bushing
Step 9:Change thefrom
hinge
theaxis
right
Figure
8 hole to left hole(see chart 4
9. Place bottom left hand corner of door onto
lower hinge then tilt top of door back to
clear edge of top hinge. Make sure door is
level and it seals properly against cabinet
then insert hinge pin through hole in top
hinge and into door busing. Securely
fasten with Phillips screwdriver.
(See Figure 9.)
Figure 5
6. Remove three screws that hold the bottom
hinge to lower end of cabinet. (See Figure 6.)
Top Hinge
Hinge Pin
Figure 9
Hinge
Screws
10. Reinstall toe grille using same screws
removed in Step 4.
Figure 6
7
ENERGY SAVING TIPS
• Install the Beverage
Center in the
coolest part of a
dry and ventilated
room, out of direct
sunlight and away
from heating ducts
or registers. Do not
place the Beverage
Center next to heatproducing appliances such as a range, oven
or dishwasher.
• Level the Beverage Center so the door
close tightly.
• Do not over crowd the Beverage Center or
block cold air vents. Doing so causes the
Beverage Center to run longer and use
more energy. Shelves should not be lined
with aluminum foil, wax paper or paper
toweling. Liners interfere with cold air
circulation, making the Beverage Center
less efficient.
• Wipe containers dry before placing them
in the Beverage Center. This cuts down on
moisture build-up inside the unit.
• Organize the Beverage Center to reduce
door openings. Remove as many items as
needed at one time and close the door as
soon as possible.
8
TEMPERATURE CONTROLS
Cool Down Period
For best performance, allow 4 hours for the Beverage Center to cool down completely. The
Beverage Center will run continuously for the first several hours.
Temperature Control
+ -
/
• The Beverage Center can be operated by adjusting the temperature control buttons (+/-) to
the various settings.
• The new desired temperature will flash on the display for a few seconds and then switch
back to the actual temperature which will gradually change until set point is reached.
• Press the + button once to increase temperature 1° F/C.
• Press the - button once to decrease temperature 1° F/C.
• The temperature range MIN and MAX is 33° - 50°F (1° - 10°C).
Temperature display
This button turns the power ON and OFF.
This button turns the light ON and OFF.
This button toggles between Fahrenheit and Celsius temperatures.
• The default temperature for the Beverage Center is 41°F (5°C). The temperature after power
failure will be the temperature set before the power failure.
• To prolong the life of compressor, please wait for at least 5 minutes before the unit is
restarted after power failure.
Failure display
• If “E” and “F” are displayed, please contact local service personnel for repair.
• If the temperature in the Beverage Center is too low, it will display “L”.
• If the temperature in the Beverage Center is too high, the screen will display “H” and will
flash. Under this state, the buzzer will buzz for 30 seconds. One minute later, the buzzer
will continue to buzz for the next 30 seconds. After three times, the alarm will not buzz any
more. You can press any key to cancel sound alarm.
• Storing too many cans or bottles in the Beverage Center may cause the temperature in the
Beverage Center to rise temporarily.
9
CARE AND CLEANING
Cleaning the Beverage Center
• Before cleaning, turn the temperature
control to OFF, unplug the Beverage Center
and remove the bottles.
• Clean your Beverage Center once every
two months.
Inside: Wash inside surfaces of the Beverage
Center with a solution of two tablespoons of
baking soda in one quart (1.136 liters) warm
water. Rinse and dry. Wring excess water out
of the sponge or cloth when cleaning in the
area of the controls, or any electrical parts.
Wash the removable parts with the baking
soda solution mentioned above, or mild
detergent and warm water. Rinse and dry.
Never use metallic scouring pads, brushes,
abrasive cleaners, or alkaline solutions on any
surface. Do not wash removable parts in a
dishwasher.
Outside: Wash the cabinet with warm water
and mild liquid detergent. Rinse well and wipe
dry with a clean soft cloth.
Care of plastic parts
• Be sure and protect the door gasket. It
should be kept clean at all times.
• If the plastic parts in the Beverage Center
remain contaminated by oil (animal or
vegetable) for a long period of time, they
will age and crack easily. Please clean them
on a regular basis.
10
Vacation and Moving Tips
Vacations:
If the Beverage Center will not be used for
several months:
• Remove all bottles and unplug the power
cord.
• Clean and dry the interior thoroughly.
• Leave the Beverage Center door open
slightly, blocking it open if necessary, to
prevent odor and mold growth.
Moving:
When moving the Beverage Center, follow
these guidelines to prevent damage:
• Disconnect the power cord plug from the
wall outlet.
• Remove bottles and clean the Beverage
Center.
• Secure all loose items by taping them
securely in place to prevent damage.
• In a moving vehicle, secure the Beverage
Center in an upright position to prevent
movement. Also, protect the outside of the
Beverage Center with a blanket or similar
item.
WARNING
If leaving the Beverage Center door open
while on vacation, make certain that children
cannot climb inside and become entrapped.
BEFORE YOU CALL
1-800-944-9044 (United States)
1-800-265-8352 (Canada)
PROBLEM
CAUSE
Visit our web site at
www.frigidaire.com
CORRECTION
BEVERAGE CENTER OPERATION
Beverage Center
does not run.
Beverage Center
runs too much
or too long.
Interior
temperature is
too cold.
• Appliance is plugged
into a circuit that has
a ground fault interrupt.
• Use another circuit. If you are unsure
about the outlet, have it checked by a
certified technician.
• Temperature control is
in the OFF position.
• See Setting the Temperature Control
section.
• Appliance may not be
plugged in, or plug may
be loose.
• Ensure plug is tightly pushed into outlet.
• House fuse blown or
tripped circuit breaker.
• Check/replace fuse with a 15 amp timedelay fuse. Reset circuit breaker.
• Power outage.
• Check house lights. Call local Electric
Company.
• Room or outside
weather is hot.
• It’s normal for the appliance to work
harder under these conditions.
• Appliance has recently
been disconnected for a
period of time.
• It takes 4 hours for the appliance to cool
down completely.
• Door is opened too
frequently or too long.
• Warm air entering the appliance causes
it to run more. Open doors less often.
• Door may be slightly
open.
• See “DOOR PROBLEMS” section.
• Temperature control is
set too low.
• Turn control knob to a warmer setting.
Allow several hours for the temperature
to stabilize.
• Door gasket is dirty,
worn, cracked, or
poorly fitted.
• Clean or change gasket. Leaks in the
door seal will cause appliance to run
longer in order to maintain desired
temperature.
• Temperature control is
set too low.
• Turn the control to a warmer setting.
Allow several hours for the temperature
to stabilize.
11
BEFORE YOU CALL
PROBLEM
CAUSE
CORRECTION
BEVERAGE CENTER OPERATION (Continued)
Interior
temperature is
too warm.
External surface
temperature is
warm.
• Temperature control is
set too warm.
• Turn control to a colder setting. Allow
several hours for the temperature to
stabilize.
• Door is opened too
frequently or too long.
• Warm air entering the appliance causes
it to run more. Open doors less often.
• Door may not be
seating properly.
• See “DOOR PROBLEMS” section.
• Large amounts of warm
or hot food has been
stored recently.
• Warm food will cause Beverage Center to
run more until the desired temperature
is reached.
• Appliance has recently
been disconnected for a
period of time.
• It takes 4 hours for the appliance to cool
down completely.
• The external walls can
be as much as 30°F
warmer than room
temperature.
• This is normal while the compressor
works to transfer heat from inside the
cabinet.
SOUND AND NOISE
Louder sound
levels when
Beverage Center
is on.
• Modern Beverage
Centers have increased
storage capacity
and more stable
temperatures. They
require a high efficiency
compressor
• This is normal. When the surrounding
noise level is low, you might hear the
compressor running while it cools the
interior.
Longer sound
levels when
compressor
comes on.
• Appliance operates at
higher pressures during
the start of the ON
cycle.
• This is normal. Sound will level off or
disappear as refrigerator continues to
run.
Fan runs
when room
temperature is
below 45°.
• Exterior thermostat has
activated the heater
or fan.
• This is normal.
Popping or
cracking
sound when
compressor
comes on.
• Metal parts undergo
expansion and
contraction, as in hot
water pipes.
• This is normal. Sound will level off or
disappear as Beverage Center continues
to run.
Boiling or
gurgling sound,
like water
boiling.
• Refrigerant is circulating
throughout the system.
• This is normal.
Vibrating or
rattling noise.
• Appliance is not level. It
rocks on the floor when
it is moved slightly.
• Level the unit. Refer to leveling
instructions in the “Installation” section.
12
BEFORE YOU CALL
PROBLEM
CAUSE
Snapping sound.
• Cold control turning the
Beverage Center OFF
and ON.
CORRECTION
• This is normal.
WATER/MOISTURE/FROST INSIDE BEVERAGE CENTER
Moisture forms
on inside walls.
• Weather is hot and
humid.
• This is normal.
• Door may not be
seating properly.
• See “DOOR PROBLEMS” section.
• Door is kept open too
long, or opened too
frequently.
• Open the door less often.
WATER/MOISTURE/FROST OUTSIDE BEVERAGE CENTER
Moisture forms
on outside of
Beverage Center.
• Door may not be
seating properly,
causing the cold
air from inside the
Beverage Center to
meet warm moist air
from outside.
• See “DOOR PROBLEMS” section.
ODOR IN BEVERAGE CENTER
Odors in
Beverage Center.
• Interior needs to be
cleaned.
• Clean interior with sponge, warm water,
and baking soda.
• Appliance is not level. It
rocks on the floor when
it is moved slightly.
• This condition may force the cabinet out
of square and misalign the door. Refer to
“Leveling” in the “Installation” section.
DOOR PROBLEMS
Door will not
close.
13
MAJOR APPLIANCE WARRANTY
Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove
to be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions.
Exclusions
This warranty does not cover the following:
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside
the USA or Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased “as-is” are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
not in ordinary household use or used other than in accordance with the provided instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards,
shelves, etc., which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other
consumables, or knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry
trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not
limited to floors, cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE
YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH
AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS
WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
If You Need Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty
period should service be required. If service is performed, it is in your best interest to obtain and
keep all receipts. Service under this warranty must be obtained by contacting Electrolux at the
addresses or phone numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by
Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada,
your appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change
or add to any obligations under this warranty. Obligations for service and parts under this warranty
must be performed by Electrolux or an authorized service company. Product features or specifications
as described or illustrated are subject to change without notice.
USA
1.800.944.9044
Frigidaire
10200 David Taylor Drive
Charlotte, NC 28262
14
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement