Vibe RAPAWK5M Critical Link 5m Rapid Fit Amp Wiring Kit Manual

Add to My manuals
2 Pages

advertisement

Vibe RAPAWK5M Critical Link 5m Rapid Fit Amp Wiring Kit Manual | Manualzz

RAPAWK2.5M / RAPAWK5M

Rapid Fit Wiring Kit

Installation instructions for VIBE

Powerbox400.1M-V7

Connections

Chassis ground

Ensure that correct polarity is observed or a lack of bass will result.

Note : using this kit does not require the remote turn on wire to be connected to the amplifier.

If you are unsure, please contact your nearest authorised VIBE dealer.

Connect to fuse box

Original system fuse

Powerbox 400.1M fuse

Max 30A

Limited Warranty

All VIBE products carry a full 12 month warranty, valid from the date of the original receipt and proof of purchase (UK only). The online warranty card should be completed within seven days of the original purchase date. The original receipt and packaging should be retained for this twelve month period. If the product develops a problem any stage during the warranty period, it should be returned to the point of purchase in it’s original packaging, and complete with no items missing.

A full description of VIBE’s warranty information can be found on our website: www.vibeaudio.co.uk

What Is Not Covered

• Damage to product due to improper installation.

• Subsequent damage to other components.

• Damage caused by exposure to moisture, excessive heat, chemical cleaners and / or UV

radiation.

• Damage through negligence, misuse, accident or abuse. Repeated returns for the same fault

may be considered abuse.

• Any cost or expense related to the removal and / or re-installation of the product.

• Damage caused by amplifier clipping or distortion.

• Items repaired or modified by any unauthorised repair facility.

• Return shipping on non defective items.

• Products returned without a returns authorisation number.

Attention

An aftermarket audio amplifier will place an additional load on the vehicles charging system.

Most modern vehicles have sufficient capacity in the charging system as not all the electrical components of the vehicle will be switched on at once.

Check the fuse rating of the amplifier and use this as the peak current requirement.

Generally the continuous current draw will be a third of the peak current.

UK Technical Enquiries

Call 09067031420

Calls cost 50p per minute. Call costs correct at date of publication (01/02/12)

Hours of business 9.00am - 5.30pm GMT Monday - Friday.

All calls are recorded for training purposes.

MIDBASS Distribution

PO Box 11000

B75 7WG

International Technical Enquiries

For international technical support please contact the distribution agent for your country.

Please visit www.vibeaudio.co.uk

for more details.

advertisement

Related manuals

advertisement