Owner’s Manual & Safety Instructions
Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 20j
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright © 2020 by Harbor Freight Tools ® . All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Specifications
Drawer Load Capacity 22 lb
Side Tray Load Capacity 22 lb
IMPORTANT SAFETY INFORMATION
1. Do not roll the seat while loaded over rough surfaces, such as concrete seams. Use on flat, level, hard surface only. Wheels may scratch or dig into less durable surfaces (such as linoleum or wood).
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Use as intended only. Do not stand on seat or lean back on seat.
4. This product is not a toy. Do not allow children to play with or near this item.
5. Close all drawers completely before sitting on or rolling Seat.
6. Keep bystanders out of the area during assembly.
7. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
8. Weight capacity and other product capabilities apply to properly and completely assembled product only.
9. Inspect before every use; do not use if parts are loose or damaged.
10. Do not exceed 300 lb weight capacity.
Be aware of dynamic loading!
Sudden load movement may briefly create excess load causing product failure.
11. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
Page 2 For technical questions, please call 1-888-866-5797.
Item 57317
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.
1. Use M6x40 Bolts, Washers, and Lock Nuts to connect Short Frame (2) to the Long Frame (1).
Washer (4)
Bolt (3)
Long
Frame (1)
4. Use Head Caps (6), Flat Washers (7), and Spring
Washers (8) to connect Casters (9) to the Frame.
Head Cap (6)
Spring Washer (8)
Flat Washer (7)
Caster (9)
Nut (5)
Short Frame (2)
2. Place Tray Holder (15) in between Panels and insert into the designated grooves on each Panel.
Tray Holder (15)
Rear Panel
5. Slide Side Tray (19) onto the assembled
Frame and secure using two Lock Bolts.
3. Place Seat Base (16) onto Panels and use M6x25
Bolts and Washers to connect Panels to Base.
Seat Base (16)
Bolt (23)
Side Tray
(19)
Lock Bolt (21)
6. Repeat process for the other Side Tray.
7. Attach Side Cup (20) by inserting into designated slot on the Side Tray.
Side Cup (20)
Washer (24)
Side Tray
Slot
8. Repeat process for the other Side Cup.
9. Attach Tray (18) by sliding into the opening on Main Panel.
10. Attach Tool Holder (22) by securing it to the opening on Rear Panel.
Item 57317 For technical questions, please call 1-888-866-5797.
Page 3
Parts List and Diagram
Part
1
Description
Long Frame
2
3
4
5
6
Short Frame
Bolt M6x40mm
Flat Washer M6
Lock Nut M6
Hex Head Cap
7
8
9
Flat Washer for Caster
Spring Washer for Caster
Caster
10 Plastic End Cap
11 Main Panel
12 Rear Panel
Qty
2
8
1
1
4
4
4
2
4
8
8
4
Part Description
13 Bolt M6x50mm
14 Cross Bar
15 Tray Holder
16 Seat Base
17 Seat
18 Tray
19 Side Tray
20 Side Cup
21 Lock Bolt
22 Tool Holder
23 Bolt M6x25mm
24 Flat Washer 13/23
Qty
4
1
4
8
2
2
4
2
1
1
1
1
Page 4
17
16
14
22
15
1
10
12
4
4
5
3
6
8
7
2
9
11 24
13
18
24
23
20
21
19
For technical questions, please call 1-888-866-5797.
Item 57317
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Item 57317 For technical questions, please call 1-888-866-5797.
Page 5
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
Page 6 For technical questions, please call 1-888-866-5797.
Item 57317
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Item 57317 For technical questions, please call 1-888-866-5797.
Page 7
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
